Mechanism investigation for poloxamer 188 raw material variation in cell culture

Variability in poloxamer 188 (P188) raw material, which is routinely used in cell culture media to protect cells from hydrodynamic forces, plays an important role in the process performance. Even though tremendous efforts have been spent to understand the mechanism of poloxamer's protection, the root cause for lot‐to‐lot variation was not clear. A recent study reported that the low performance was not due to toxicity but inefficiency to protect cells (Peng et al., Biotechnol Prog. 2014;30:1411–1418). In this study, it was demonstrated for the first time that the addition of other surfactants even at a very low level can interfere with P188 resulting in a loss of efficiency. It was also found that the performance of P188 lots correlated well with its foam stability. Foam generated from low performing lots in baffled shaker flask lasts longer, which suggests that the components in the foam layers are different. The spiking of foam generated from a low performing lot into the media containing a high performance lot resulted in cell damage and low growth. Analytical studies using size exclusion chromatography (SEC) identified differences in high molecular weight (HMW) species present in the P188 lots. These differences are much clearer when comparing the HMW region of the SEC chromatogram of foam vs. bulk liquid samples. This study shows that low performing lots have enriched HMW species in foam samples due to high hydrophobicity, which can be potentially used as a screening assay. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:767–775, 2016     

Development of a rapid and reliable analytical method for screening poloxamer 188 for use in cell culture process

Poloxamer P188 is a common nonionic surfactant additive used in cell culture media as a cellular protectant from the hydrodynamic forces and shear stress during bioprocessing. Presence of a hydrophobic high molecular weight impurity contaminant has been shown to compromise its protective properties and lead to batch failure. In this work we present, a reliable, sensitive, and rapid analytical method to detect and quantify the contaminant impurity in poloxamer 188. This method replaces a laborious and time-consuming functional test in the form of a shake flask assay. The method is based upon reversed-phase liquid chromatography with charged aerosol detection, simple mobile phase compositions, and a three-step gradient. The method was optimized to resolve the impurity from the main P188 fraction in less than 10 min. Analytical method qualification and functional test comparison demonstrate equivalent or better high throughput impurity screening performance. Attempts to identify the impurity and establish suitable method positive control standards are also discussed.     

Application of multivariate analysis and mass transfer principles for refinement of a 3‐L bioreactor scale‐down model—when shake flasks mimic 15,000‐L bioreactors better

Characterization of manufacturing processes is key to understanding the effects of process parameters on process performance and product quality. These studies are generally conducted using small‐scale model systems. Because of the importance of the results derived from these studies, the small‐scale model should be predictive of large scale. Typically, small‐scale bioreactors, which are considered superior to shake flasks in simulating large‐scale bioreactors, are used as the scale‐down models for characterizing mammalian cell culture processes. In this article, we describe a case study where a cell culture unit operation in bioreactors using one‐sided pH control and their satellites (small‐scale runs conducted using the same post‐inoculation cultures and nutrient feeds) in 3‐L bioreactors and shake flasks indicated that shake flasks mimicked the large‐scale performance better than 3‐L bioreactors. We detail here how multivariate analysis was used to make the pertinent assessment and to generate the hypothesis for refining the existing 3‐L scale‐down model. Relevant statistical techniques such as principal component analysis, partial least square, orthogonal partial least square, and discriminant analysis were used to identify the outliers and to determine the discriminatory variables responsible for performance differences at different scales. The resulting analysis, in combination with mass transfer principles, led to the hypothesis that observed similarities between 15,000‐L and shake flask runs, and differences between 15,000‐L and 3‐L runs, were due to pCO₂ and pH values. This hypothesis was confirmed by changing the aeration strategy at 3‐L scale. By reducing the initial sparge rate in 3‐L bioreactor, process performance and product quality data moved closer to that of large scale. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1370–1380, 2015     

Screening soy hydrolysates for the production of a recombinant therapeutic protein in commercial cell line by combined approach of near-infrared spectroscopy and chemometrics

Soy hydrolysates are widely used as the major nutrient sources for cell culture processes for industrial manufacturing of therapeutic recombinant proteins. The primary goal of this study was to develop a spectroscopy based chemometric method, a partial least squares (PLS), to screen soy hydrolysates for better yield of protein production (titers) in cell culture medium. Harvest titer values of 29 soy hydrolysate lots with production yield between 490 and 1,350 mg/L were obtained from shake flask models or from manufacture engineering runs. The soy hydrolysate samples were measured by near-infrared (NIR) in reflectance mode using an infrared fiber optic probe. The fiber optic probe could easily enable in situ measurement of the soy hydrolysates for convenient raw material screening. The best PLS calibration has a determination coefficient of R ²?=?0.887 utilizing no spectral preprocessing, the two spectral ranges of 10,000–5,376 cm^?1 and 4,980–4,484 cm^?1, and a rank of 6 factors. The cross-validation of the model resulted in a determination coefficient of R ²?=?0.741 between the predicted and actual titer values with an average standard deviation of 72 mg/L. Compared with the resource demanding shake flask model, the combination of NIR and chemometric modeling provides a convenient method for soy hydrolysate screening with the advantage of fast speed, low cost and non-destructive.     

Scale‐up of Oldenlandia affinis suspension cultures in photobioreactors for cyclotide production

Cyclotides are a family of backbone‐cyclized cystine‐knot‐containing macrocyclic peptides from plants that possess extremely interesting biological activities. Suspension cultures of Oldenlandia affinis, a model plant containing cyclotides, were scaled‐up from shake flask to photobioreactor operation in order to produce these plant peptides under controlled conditions. Cell growth was highly dependent on inoculation culture; cell density as well as culture age had an effect on the growth rates and thus affected the kalata B1 productivity of the bioprocess. In a 25 l scale bioreactor the maximum doubling time was about 1.12 days compared to 2.24 days in shake flasks. The accumulation of kalata B1 of 0.09 mg g^?1 DW and 0.07–0.10 mg g^?1 DW respectively, however, was on a similar level during the corresponding stationary growth phases in both bioreactor and flask processes. An adjustment of cell culture growth via culture preparation and inoculum density to high cyclotide accumulation results in an estimated output during the most productive retardation phase of about 21 mg kalata B1 per day in the 25 l system. This makes the biotechnological cyclotide synthesis under GMP conditions a competitive production tool compared to field cultivation, chemical, and recombinant synthesis in drug discovery for structure analysis and bioactivity assays.     

The scale up of mycelial shake flask fermentations: A case study of gamma linolenic acid production byMucor hiemalis IRL 51

Summary Production of gamma linolenic acid (GLA) by the filamentous fungusMucor hiemalis IRL 51 was studied in both shake flask culture and in a 10-L stirred tank fermenter. This study was conducted to assess how the results from shake flask media screening trials compared to those obtained in a 10-L stirred tank fermenter, which is assumed to be more representative of an industrial system. The results show that the biological performance in 10-L fermenters is usually the same as that in shake flask culture. There were some inconsistencies which could possibly be attributed to scale, but no large differences were systematically seen. These results show that for this filamentous fungus, shake flask culture provides a quick and inexpensive way of optimizing medium composition.     

Economical parallel protein expression screening and scale-up in Escherichia coli

A novel microfermentation and scale-up platform for parallel protein production in Escherichia coli is described. The vertical shaker device Vertiga, which generates low-volume high density (A₆₀₀ ∼ 20) Escherichia coli cultures in 96-position deep-well plates without auxiliary oxygen supplementation, has been coupled to a new disposable shake flask design, the Ultra Yield^TM flask, that allows for equally high cell culture densities to be obtained. The Ultra Yield^TM flask, which accommodates up to 1 l in culture volume, has a baffled base and a more vertical wall construction compared to traditional shake flask designs. Experimental data is presented demonstrating that the Ultra Yield^TM flask generates, on average, an equivalent amount of recombinant protein per unit cell culture density as do traditional shake flask designs but at a substantially greater amount per unit volume. The combination of Vertiga and the Ultra Yield^TM flask provides a convenient and scalable low-cost solution to parallel protein production in Escherichia coli.     

Modeling of growth and laccase production by Pycnoporus sanguineus

Production of extracellular laccase by the white-rot fungus Pycnoporus sanguineus was examined in batch submerged cultures in shake flasks, baffled shake flasks and a stirred tank bioreactor. The biomass growth in the various culture systems closely followed a logistic growth model. The production of laccase followed a Luedeking-Piret model. A modified Luedeking-Piret model incorporating logistic growth effectively described the consumption of glucose. Biomass productivity, enzyme productivity and substrate consumption were enhanced in baffled shake flasks relative to the cases for the conventional shake flasks. This was associated with improved oxygen transfer in the presence of the baffles. The best results were obtained in the stirred tank bioreactor. At 28 °C, pH 4.5, an agitation speed of 600 rpm and a dissolved oxygen concentration of ~25 % of air saturation, the laccase productivity in the bioreactor exceeded 19 U L^?1 days^?1, or 1.5-fold better than the best case for the baffled shake flask. The final concentration of the enzyme was about 325 U L^?1.     

Strategies for selecting Recombinant CHO cell lines for cGMP manufacturing: Realizing the potential in bioreactors

Manufacture of recombinant proteins from mammalian cell lines requires the use of bioreactor systems at scales of up to 20,000 L. The cost and complexity of such systems can prohibit their extensive use during the process to construct and select the manufacturing cell line. It is therefore common practice to develop a model of the production process in a small scale vessel, such as a shake‐flask, where lower costs, ease of handling, and higher throughput are possible. This model can then be used to select a small number of cell lines for further evaluation in bioreactor culture. Here, we extend our previous work investigating cell line construction strategies to assess how well the behavior of cell lines in such a shake‐flask assessment predicts behavior in the associated bioreactor production process. A panel of 29 GS‐CHO cell lines, all producing the same antibody, were selected to include a mixture of high and low producers from a pool of 175 transfectants. Assessment of this panel in 10 L bioreactor culture revealed wide variation in parameters including growth, productivity, and metabolite utilization. In general, those cell lines which were high producing in the bioreactor cultures had also been higher producing in an earlier shake‐flask assessment. However, some changes in rank position of the evaluated cell lines were seen between the two systems. A potential explanation of these observations is discussed and approaches to improve the predictability of assessments used for cell line selection are considered. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Anthraquinones production in Rubia tinctorum cell suspension cultures: Down scale of shear effects

The effect of turbulence on suspended cells is one of the most complex problems in the scale-up of cell cultures. In the present paper, a direct comparison of the effects of turbulence on suspension cultures of Rubia tinctorum in a standard bioreactor and in shake flask cultures was done. A procedure derived from the well known global method proposed by Nishikawa et al. (1977) [39] was applied. Standard flasks and four-baffled shake flasks were used. The effect of turbulence and light irradiation on cell viability, biomass, and anthraquinones (AQs) production was evaluated. The biomass concentration and AQs production obtained using baffled shake flasks agitated at 360 rpm were similar to that achieved in R. tinctorum suspension cultures growing in a stirred tank bioreactor operating at 450 rpm, previously published (Busto et al., 2008 [17]). The effect of light on AQs production was found to be very significant, and a difference of up to 48% was found in cells with and without illumination after 7 days of culture. It is concluded that this down-scaled and simple flask culture system is a suitable and valid small scale instrument for the study of intracellular mechanisms of turbulence-induced AQs production in R. tinctorum suspension cultures.     

Development of a stirred tank reactor system for the production of lignin peroxidases (ligninases) byPhanerochaete chrysosporium BKM-F-1767

Summary Lignin peroxidases produced byPhanerochaete chrysosporium have several important potential industrial applications based on their ability to degrade lignin and lignin-like compounds. A stirred tank reactor system for the production of lignin peroxidases is described here. Included in this study is an examination of the mechanics of pellet biocatalyst formation and the optimization of an acetate buffered medium. Higher levels of lignin peroxidase were obtained with acetate buffer compared to the other buffer systems tested. Concentrations of 0.05% (w/v) Tween 80 and 0.4 mM veratryl alcohol gave optimal lignin peroxidase activity in acetate buffered medium. In shake flask cultures, mycelial fragments in the inoculum aggregated into pellets during the first eight hours of incubation and thereafter increased in size through the eighth day. The agitation rate in shake flask cultures affected pellet size, the number of pellets formed, and lignin peroxidase activity. Transfer of fungal pellets from shake flask culture to a continuously oxygenated baffled stirred tank reactor (STR) resulted in production of high lignin peroxidase titres comparable to those of shake flask cultures when the agitation rate, oxygen dispersion and foaming were closely controlled.     

Ajmalicine production by cell cultures of Catharanthus roseus: from shake flask to bioreactor

The productivity of a cell culture for the production of a secondary metabolite is defined by three factors: specific growth rate, specific product formation rate, and biomass concentration during production. The effect of scaling-up from shake flask to bioreactor on growth and production and the effect of increasing the biomass concentration were investigated for the production of ajmalicine by Catharanthus roseus cell suspensions. Growth of biomass was not affected by the type of culture vessel. Growth, carbohydrate storage, glucose and oxygen consumption, and the carbon dioxide production could be predicted rather well by a structured model with the internal phosphate and the external glucose concentration as the controlling factors. The production of ajmalicine on production medium in a shake flask was not reproduced in a bioreactor. The production could be restored by creating a gas regime in the bioreactor comparable to that in a shake flask. Increasing the biomass concentration both in a shake flask and in a stirred fermenter decreased the ajmalicine production rate. This effect could be removed partly by controlling the oxygen concentration in the more dense culture at 85% air saturation.     

Enhanced production of l‐lactic acid by Lactobacillus thermophilus SRZ50 mutant generated by high‐linear energy transfer heavy ion mutagenesis

The aim of this study was to improve l ‐lactic acid production of Lactobacillus thermophilus SRZ50. For this purpose, high efficient heavy‐ion mutagenesis technique was performed using SRZ50 as the original strain. To enhance the screening efficiency for high yield l ‐lactic acid producers, a scale‐down from shake flask to microtiter plate was developed. The results showed that 24‐well U‐bottom MTPs could well alternate shake flasks for L. thermophilus cultivation as a scale‐down tool due to its a very good comparability to the shake flasks. Based on this microtiter plate screening method, two high l ‐lactic acid productivity mutants, A59 and A69, were successfully screened out, which presented, respectively, 15.8 and 16.2% higher productivities than that of the original strain. Based on fed‐batch fermentation, the A69 mutant can accumulate 114.2 g/L l ‐lactic acid at 96 h. Hence, the proposed traditional microbial breeding method with efficient high‐throughput screening assay was proved to be an appropriate strategy to obtain lactic acid‐overproducing strain.     

Microarray platform affords improved product analysis in mammalian cell growth studies

High throughput (HT) platforms serve as a cost‐efficient and rapid screening method for evaluating the effect of cell‐culture conditions and screening of chemicals. We report the development of a HT cell‐based microarray platform to assess the effect of culture conditions on Chinese hamster ovary (CHO) cells. Specifically, growth, transgene expression and metabolism of a GS/methionine sulphoximine (MSX) CHO cell line, which produces a therapeutic monoclonal antibody, was examined using a microarray system in conjunction with a conventional shake flask platform in a non‐proprietary medium. The microarray system consists of 60‐nL spots of cells encapsulated in alginate and separated in groups via an 8‐well chamber system attached to the chip. Results show the non‐proprietary medium developed allows cell growth, production, and normal glycosylation of recombinant antibody and metabolism of the recombinant CHO cells in both the microarray and shake flask platforms. In addition, 10.3 mM glutamate addition to the defined base medium results in lactate metabolism shift in the recombinant GS/MSX CHO cells in the shake flask platform. Ultimately, the results demonstrate that the HT microarray platform has the potential to be utilized for evaluating the impact of media additives on cellular processes, such as cell growth, metabolism, and productivity.     

Changes in alginate molecular mass distributions, broth viscosity and morphology of Azotobacter vinelandii cultured in shake flasks

The effect of different aeration conditions during the culture of Azotobacter vinelandii on the production and molecular mass of alginate was evaluated in shake flasks. In baffled flasks, the bacteria grew faster and produced less alginate (1.5 g/l) than in conventional (unbaffled) flasks (4.5 g/l). The viscosity of the culture broth was also influenced by the type of flask. Higher final viscosities were attained in unbaffled flasks [520 cP (520 mPa s)] as compared to baffled flasks (30 cP). This latter phenomenon was closely related to the changes in the molecular mass distribution. In either cases, the mean molecular mass increased with culture age; however, at the end of the fermentation, the mean molecular mass of the alginate obtained in unbaffled flasks was fivefold higher than that obtained in baffled flasks. As the culture proceeded, the cells of Azotobacter grown in unbaffled flasks increased in diameter, whereas those cultured in baffled flasks decreased in size. Received: 13 December 1996 / Received revision: 10 April 1997 / Accepted: 27 April 1997     

Establishing a Fed‐Batch Process for Protease Expression with Bacillus licheniformis in Polymer‐Based Controlled‐Release Microtiter Plates

Introducing fed‐batch mode in early stages of development projects is crucial for establishing comparable conditions to industrial fed‐batch fermentation processes. Therefore, cost efficient and easy to use small‐scale fed‐batch systems that can be integrated into existing laboratory equipment and workflows are required. Recently, a novel polymer‐based controlled‐release fed‐batch microtiter plate is described. In this work, the polymer‐based controlled‐release fed‐batch microtiter plate is used to investigate fed‐batch cultivations of a protease producing Bacillus licheniformis culture. Therefore, the oxygen transfer rate (OTR) is online‐monitored within each well of the polymer‐based controlled‐release fed‐batch microtiter plate using a µRAMOS device. Cultivations in five individual polymer‐based controlled‐release fed‐batch microtiter plates of two production lots show good reproducibility with a mean coefficient of variation of 9.2%. Decreasing initial biomass concentrations prolongs batch phase while simultaneously postponing the fed‐batch phase. The initial liquid filling volume affects the volumetric release rate, which is directly translated in different OTR levels of the fed‐batch phase. An increasing initial osmotic pressure within the mineral medium decreases both glucose release and protease yield. With the volumetric glucose release rate as scale‐up criterion, microtiter plate‐ and shake flask‐based fed‐batch cultivations are highly comparable. On basis of the small‐scale fed‐batch cultivations, a mechanistic model is established and validated. Model‐based simulations coincide well with the experimentally acquired data.     

From field sampling to pneumatic bioreactor mycelia production of the ectomycorrhizal mushroom Laccaria trichodermophora

In order to increase survival rates of greenhouse seedlings destined for restoration and conservation programs, successful mycorrhization of the seedlings is necessary. To reforest forest ecosystems, host trees must be inoculated with ectomycorrhizal fungi and, in order to guarantee a sufficient supply of ectomycorrhizal inoculum, it is necessary to develop technologies for the mass production of ectomycorrhizal fungi mycelia. We selected the ectomycorrhizal fungus Laccaria trichodermophora, due to its ecological traits and feasible mycelia production in asymbiotic conditions. Here, we report the field sampling of genetic resources, as well as the highly productive nutritional media and cultivation parameters in solid cultures. Furthermore, in order to achieve high mycelial production, we used strain screening and evaluated pH, carbon source concentration, and culture conditions of submerged cultures in normal and baffled shake flasks. The higher productivity culture conditions in shake flasks were selected for evaluation in a pneumatic bioreactor, using modified BAF media with a 10 g/L glucose, pH 5.5, 25 °C, and a volumetric oxygen transfer coefficient (K_La) of 36 h⁻¹. Under those conditions less biomass (12–37 %) was produced in the pneumatic bioreactor compared with the baffled shake flasks. This approach shows that L. trichodermophora can generate a large biomass concentration and constitute the biotechnological foundation of its mycelia mass production.     

Novel micro‐bioreactor high throughput technology for cell culture process development: Reproducibility and scalability assessment of fed‐batch CHO cultures

With increasing timeline pressures to get therapeutic and vaccine candidates into the clinic, resource intensive approaches such as the use of shake flasks and bench‐top bioreactors may limit the design space for experimentation to yield highly productive processes. The need to conduct large numbers of experiments has resulted in the use of miniaturized high‐throughput (HT) technology for process development. One such high‐throughput system is the SimCell? platform, a robotically driven, cell culture bioreactor system developed by BioProcessors Corp. This study describes the use of the SimCell? micro‐bioreactor technology for fed‐batch cultivation of a GS‐CHO transfectant expressing a model IgG4 monoclonal antibody. Cultivations were conducted in gas‐permeable chambers based on a micro‐fluidic design, with six micro‐bioreactors (MBs) per micro‐bioreactor array (MBA). Online, non‐invasive measurement of total cell density, pH and dissolved oxygen (DO) was performed. One hundred fourteen parallel MBs (19 MBAs) were employed to examine process reproducibility and scalability at shake flask, 3‐ and 100‐L bioreactor scales. The results of the study demonstrate that the SimCell? platform operated under fed‐batch conditions could support viable cell concentrations up to least 12 × 10⁶ cells/mL. In addition, both intra‐MB (MB to MB) as well as intra‐MBA (MBA to MBA) culture performance was found to be highly reproducible. The intra‐MB and ‐MBA variability was calculated for each measurement as the coefficient of variation defined as CV (%) = (standard deviation/mean) × 100. The % CV values for most intra‐MB and intra‐MBA measurements were generally under 10% and the intra‐MBA values were slightly lower than those for intra‐MB. Cell growth, process parameters, metabolic and protein titer profiles were also compared to those from shake flask, bench‐top, and pilot scale bioreactor cultivations and found to be within ±20% of the historical averages. Biotechnol. Bioeng. 2010; 106: 57–67. © 2010 Wiley Periodicals, Inc.     

Optimization of submerged culture conditions for the mycelial growth and exo-biopolymer production by Cordyceps militaris

AIMS: The objective of the present study was to determine the optimal culture conditions for exo-biopolymer production by Cordyceps militaris in shake flask culture. METHODS AND RESULTS: The optimal temperature and initial pH for both mycelial growth and exo-biopolymer production by Cordyceps militaris in shake flask culture were found to be 20 degrees C and 6.0, respectively. Sucrose (40 g x l(-1)) and corn steep powder (10 g x l(-1)) were the most suitable carbon and nitrogen source for both mycelial growth and exo-biopolymer production. CONCLUSION: Under optimal culture conditions, the maximum exo-biopolymer concentration in a 5-l jar fermenter indicated 10.3 g x l(-1), which was approximately three times higher than that in shake flask culture. SIGNIFICANCE AND IMPACT OF THE STUDY: This process can have a significant impact on the industrial scale when sucrose and corn steep powder were used as carbon and nitrogen source.     

Improvement of Panax notoginseng cell culture for production of ginseng saponin and polysaccharide by high density cultivation in pneumatically agitated bioreactors

A Panax notoginseng cell culture was successfully scaled up from shake flask to 1.0-L bubble column reactor and concentric-tube airlift reactor. High-density bioreactor batch cultivation was carried out using a modified MS medium. The maximum cell density in batch cultures reached 20.1, 21.0 and 24.1 g/L in the shake flask, bubble column and airlift reactors, respectively, and their corresponding biomass productivity was 950, 1140 and 1350 mg/(L x d) for each. The productivity of ginseng saponin was 70, 96 and 99 mg/(L x d) in the flask, bubble column and airlift reactors, respectively; and the polysaccharide productivity reached 104, 119 and 151 mg/(L x d) for each. Furthermore, a fed-batch cultivation strategy was developed on the basis of specific oxygen uptake rate (SOUR), i.e., sucrose feeding before a sharp decrease of SOUR, and the highest cell density of 29.7 g/L was successfully achieved in the airlift bioreactor on day 17 with a very high biomass productivity of 1520 mg/(L x d). The concentrations of ginseng saponin and polysaccharide reached about 2.1 and 3.0 g/L, respectively, and their productivity was 106 (saponin) and 158 mg/(L x d) (polysaccharide). This work successfully demonstrated the high-density bioreactor cultivation of P. notoginseng cells in pneumatically agitated bioreactors and the reproduction of the shake flask culture results in bioreactors. The cell density, biomass productivity, production titer and productivity of both ginseng saponin and polysaccharide obtained here were the highest that have been reported on a reactor scale for all the ginseng species.