Partition behavior of CD133+ stem cells from human umbilical cord blood in aqueous two‐phase systems: In route to establish novel stem cell primary recovery strategies

Aqueous two‐phase systems (ATPS) represent a promising strategy for the recovery of CD133⁺ stem cells. This particular type of stem cells has great potential for research and clinical applications. Traditional [polyethylene glycol (PEG), dextran (DEX), and ficoll] and novel (Ucon) polymer–polymer ATPS were exploited to study the partitioning behavior of CD133⁺ stem cells and contaminants from human umbilical cord blood (HUCB). The aim of the study was to select conditions under which the product of interest and the contaminants concentrate in opposite phases. To accomplish this, three independent samples were tested: (1) enriched CD133⁺ sample, (2) whole HUCB (contaminants), and (3) complex sample (CD133⁺ stem cells and contaminants). The objective of this research was to evaluate the partition behavior of CD133⁺ in ATPS in route to establish the basis for the development of a novel and scalable purification bioprocess. In conclusion, the partitioning behavior of CD133⁺ stem cells and contaminants from complex samples was as follows: 59% of CD133⁺ stem cells fractionated to the top phase when employing ficoll 400,000–DEX 70,000 or 100% to the bottom phase with Ucon‐DEX 75,000 and PEG 8,000‐DEX 500,000 ATPS. In average, 35% of the contaminants partitioned to the top phase of the ficoll 400,000‐DEX 70,000 ATPS, 99% to the dextran rich phase of the Ucon‐DEX 75,000 systems and 97% to the bottom phase of the PEG 8,000‐DEX 500,000. Cell viability was at least 98% after ATPS recovery. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:700–707, 2014     

Purification of IgG and albumin from human plasma by aqueous two phase system fractionation

The current shortages in human plasma products at global levels justify the development of new, cost effective plasma fractionation methods. We have developed a fractionation process to obtain immunoglobulin G (IgG) and albumin‐enriched fractions based on polymer‐salt aqueous two phase system (ATPS). A small‐scale (0.02 L) ATPS composed of polyethyleneglycol 3350 (PEG), potassium phosphate and sodium chloride, at pH 6.1, was evaluated and subjected to 50‐fold scale‐up (1 L). Further purification of the fractions was performed using caprylic acid precipitation and ion exchange chromatography. Similar yield and purity were obtained at both small and large scales. IgG precipitated in the PEG rich upper phase at 83% recovery and 2.75‐fold purification factor. An 81% pure albumin fraction was obtained in the salt rich bottom phase with a 91% yield. After polishing, IgG was obtained at a recovery of 70% and a purity of 92%. Corresponding values for albumin were 91% and 90%. This IgG and albumin fractionation technology deserves further evaluation as it may represent a potential alternative to conventional plasma fractionation methods. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 1005–1011, 2012     

Effects of chemical modifications in the partition behavior of proteins in aqueous two‐phase systems: A case study with RNase A

Chemical modification of proteins is gaining importance due to the improvement in properties and the broader range of applications that these protein conjugates have. Once modified, several purification strategies need to be applied to isolate the conjugates of interest. Aqueous two‐phase systems (ATPS) are an attractive alternative for the primary recovery of proteins and their conjugates. However, to better understand which biochemical parameters affect in greater degree the partition behavior of these modified proteins in ATPS, it becomes necessary to characterize the partition behavior of different species. In this work, ribonuclease A (RNase A) was selected as a model protein to address the partition behavior of chemically modified proteins in ATPS. Native, mono‐PEGylated, Uniblue A, Dabsyl Chloride, and Direct Red 83 chemically modified RNase A's were partitioned in 16 different polyethylene glycol (PEG)–potassium phosphate ATPS. Results suggest that while the effects of system design parameters govern the partition of native RNase A, the behavior of the chemically modified species is more influenced by the physicochemical characteristics of the modifying molecules, that in most cases promote partition toward the top polymer‐rich phase with recovery percentages as high as 86%. It has been found that both, the hydrophobicity and molecular weight of the modifying species play a preponderant role in conjugate partition behavior since as hydrophobicity increases partition is promoted towards the PEG‐rich phase balancing the effect of the molecular weight of the modifying molecules that tends to shift partition towards the salt rich phase. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 378–385, 2013     

Potential Aqueous Two‐Phase Processes for the Primary Recovery of Colored Protein from Microbial Origin

The primary recovery of c‐phycocyanin and b‐phycoerythrin from Spirulina maxima and Porphyridium cruentum, respectively, using an established extraction strategy was selected as a practical model system to study the generic application of polyethylene glycol (PEG)‐phosphate aqueous two‐phase systems (ATPS). The generic practical implementation of ATPS extraction was evaluated for the recovery of colored proteins from microbial origin. A comparison of the influence of system parameters, such as PEG molecular mass, concentration of PEG as well as salt, system pH and volume ratio, on the partition behavior of c‐phycocyanin and b‐phycoerythrin was carried out to determine under which conditions target colored protein and contaminants concentrate to opposite phases. One‐stage processes are proposed for the primary recovery of the colored proteins. PEG1450‐phosphate ATPS extraction (volume ratio (V_R) equal to 0.3, tie‐line length (TLL) of 34 % w/w and system pH 7.0) for the recovery of c‐phycocyanin from Spirulina maxima resulted in a primary recovery process that produced a protein purity of 2.1 ± 0.2 (defined as the relationship of 620 nm to 280 nm absorbance) and a product yield of 98 % [w/w]. PEG1000‐phosphate ATPS extraction (i.e., V_R = 1.0, PEG 1000, TLL 50 % w/w and system pH 7.0) was preferred for the recovery of b‐phycoerythrin from Porphyridium cruentum, which resulted in a protein purity of 2.8 ± 0.2 (defined as the relationship of 545 nm to 280 nm absorbance) and a product yield of 82 % [w/w]. The purity of c‐phycocyanin and b‐phycoerythrin from the crude extract increased 3‐ and 4‐fold, respectively, after ATPS. The results reported herein demonstrated the benefits of the practical generic application of ATPS for the primary recovery of colored proteins from microbial origin as a first step for the development of purification processes.     

Preparation and recycling of aqueous two‐phase systems with pH‐sensitive amphiphilic terpolymer PADB

In this study, a novel pH‐sensitive terpolymer PADB was synthesized by random terpolymerization of 2‐(dimethylamino) ethyl methacrylate, acrylic acid, and butyl methacrylate. The terpolymer PADB could form aqueous two‐phase systems (ATPS) with a light‐sensitive terpolymer PNBC, which was synthesized in our laboratory, using n‐isopropylacrylamide, n‐butyl acrylate, chlorophyllin sodium copper salt as monomers. More than 97% of the PADB terpolymer could be recovered by adjusting the pH to isoelectric point (PI) 4.1. The terpolymer PNBC could be recovered by using light radiation at 488 nm, with recovery ratio of 98%. BSA and lysozyme were partitioned in the PNBC–PADB ATPS to examine this new system. It was found that the partition coefficient of BSA and lysozyme could reach 4.46 and 0.49 in the systems, respectively. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Application of an aqueous two‐phase systems high‐throughput screening method to evaluate mAb HCP separation

Aqueous two‐phase systems (ATPSs) as separation technique have regained substantial interest from the biotech industry. Biopharmaceutical companies faced with increasing product titers and stiffening economic competition reconsider ATPS as an alternative to chromatography. As the implementation of an ATPS is material, time, and labor intensive, a miniaturized and automated screening process would be beneficial. In this article such a method, its statistical evaluation, and its application to a biopharmaceutical separation task are shown. To speed up early stage ATPS profiling an automated application of the cloud‐point method for binodal determination was developed. PEG4000–PO₄ binodals were measured automatically and manually and were found to be identical within the experimental error. The ATPS screening procedure was applied to a model system and an industrial separation task. PEG4000–PO₄ systems at a protein concentration of 0.75 mg/mL were used. The influence of pH, NaCl addition, and tie line length was investigated. Lysozyme as model protein, two monoclonal antibodies, and a host cell protein pool were used. The method was found to yield partition coefficients identical to manually determined values for lysozyme. The monoclonal antibodies were shifted from the bottom into the upper phase by addition of NaCl. This shift occurred at lower NaCl concentration when the pH of the system was closer to the pI of the distributed protein. Addition of NaCl, increase in PEG4000 concentration and pH led to significant loss of the mAb due to precipitation. Capacity limitations of these systems were thus demonstrated. The chosen model systems allowed a reduction of up to 50% HCP with a recovery of greater than 95% of the target proteins. As these values might not be industrially relevant when compared to current chromatographic procedures, the developed screening procedure allows a fast evaluation of more suitable and optimized ATPS system for a given task. Biotechnol. Bioeng. 2011; 108:69–81. © 2010 Wiley Periodicals, Inc.     

An integrated practical implementation of continuous aqueous two‐phase systems for the recovery of human IgG: From the microdevice to a multistage bench‐scale mixer‐settler device

Aqueous two‐phase systems (ATPS) are a liquid‐liquid extraction technology with clear process benefits; however, its lack of industrial embracement is still a challenge to overcome. Antibodies are a potential product to be recovered by ATPS in a commercial context. The objective of this work is to present a more integral approach of the different isolated strategies that have arisen in order to enable a practical, generic implementation of ATPS, using human immunoglobulin G (IgG) as experimental model. A microfluidic device is used for ATPS parameters preselection for product recovery. ATPS were continuously operated in a mixer‐settler device in one stage, multistage and multistage with recirculation configuration. Single‐stage pure IgG extraction with a polyethylene glycol (PEG) 3350‐phophates ATPS within continuous operation allowed a 65% recovery. Further implementation of a multistage platform promoted a higher particle partitioning reaching a 90% recovery. The processing of IgG from a cell supernatant culture harvest in a multistage system with top phase recirculation resulted in 78% IgG recovery in bottom phase. This work conjugates three not widely spread methodologies for ATPS: microfluidics, continuous and multistage operation.     

Downstream antibody purification using aqueous two‐phase extraction

The extraction of antibodies using a polyethylene glycol (PEG)‐citrate aqueous two‐phase system (ATPS) was investigated. Studies using purified monoclonal antibody (mAb) identified operating ranges for successful phase formation and factors that significantly affected antibody partitioning. The separation of antibody and host cell protein (HCP) from clarified cell culture media was examined using statistical design of experiments (DOE). The partitioning of antibody was nearly complete over the entire range of the operating space examined. A model of the HCP partitioning was generated in which both NaCl and citrate concentrations were identified as significant factors. To achieve the highest purity, the partitioning of HCP from cell culture fluid into the product containing phase was minimized using a Steepest Descent algorithm. An optimal ATPS consisting of 14.0% (w/w) PEG, 8.4% (w/w) citrate, and 7.2% (w/w) NaCl at pH 7.2 resulted in a product yield of 89%, an approximate 7.6‐fold reduction in HCP levels relative to the clarified cell culture fluid before extraction and an overall purity of 70%. A system consisting of 15% (w/w) PEG, 8% (w/w) citrate, and 15% (w/w) NaCl at pH 5.5 reduced product‐related impurities (aggregates and low molecular product fragments) from ～40% to less than 0.5% while achieving 95% product recovery. At the experimental conditions that were optimized in the batch mode, a scale‐up model for the use of counter‐current extraction technology was developed to identify potential improvements in purity and recovery that could be realized in the continuous operational mode. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Potential of Aqueous Two-Phase Systems constructed on flexible devices: Human serum albumin as proof of concept

In the present research, the potential use of flexible disposable devices, specifically blood bags, for the fractionation of biological products using Aqueous Two-Phase Systems (ATPS) polymer–salt is studied and demonstrated. Purified human serum albumin (HSA) was used as model protein. Experiments were carried out on ATPS polyethylene glycol (PEG)–potassium phosphate constructed on rigid recipients (conical tubes) and flexible devices (blood bags). The device used for ATPS construction had no significant effect on HSA partition behavior. Protein partition towards the top phase was favored on systems constructed using PEG 1000 g/mol and TLL 45% (w/w), achieving up to 85% recovery. On the other hand a recovery of 92% was achieved at the bottom phase when PEG 3350 g/mol and TLL 25% (w/w) were used. Human serum was used as a complex sample on ATPS experiments. Selective fractionation of human serum proteins on ATPS constructed on flexible devices was achieved. ATPS constructed on blood bags required short equilibrium times (< 6 min), meaning it is feasible to use this approach on mass scale. The potential use of flexible disposable devices, for the fractionation of biological products using ATPS polymer–salt was demonstrated.     

Extractive disruption process integration using ultrasonication and an aqueous two‐phase system for protein recovery from Chlorella sorokiniana

Microalgae emerge as the most promising protein sources for aquaculture industry. However, the commercial proteins production at low cost remains a challenge. The process of harnessing microalgal proteins involves several steps such as cell disruption, isolation and extraction. The discrete processes are generally complicated, time‐consuming and costly. To date, the notion of integrating microalgal cell disruption and proteins recovery process into one step is yet to explore. Hence, this study aimed to investigate the feasibility of applying methanol/potassium ATPS in the integrated process for proteins recovery from Chlorella sorokiniana. Parameters such as salt types, salt concentrations, methanol concentrations, NaCl addition were optimized. The possibility of upscaling and the effectiveness of recycling the phase components were also studied. The results showed that ATPS formed by 30% (w/w) K₃PO₄ and 20% (w/w) methanol with 3% (w/w) NaCl addition was optimum for proteins recovery. In this system, the partition coefficient and yield were 7.28 and 84.23%, respectively. There were no significant differences in the partition coefficient and yield when the integrated process was upscaled to 100‐fold. The recovered phase components can still be recycled effectively at fifth cycle. In conclusions, this method is simple, rapid, environmental friendly and could be implemented at large scale.     

Extraction of natural red colorants from the fermented broth of Penicillium purpurogenum using aqueous two‐phase polymer systems

Safety concerns related to the increasing and widespread application of synthetic coloring agents have increased the demand for natural colorants. Fungi have been employed in the production of novel and safer colorants. In order to obtain the colorants from fermented broth, suitable extraction systems must be developed. Aqueous two‐phase polymer systems (ATPPS) offer a favorable chemical environment and provide a promising alternative for extracting and solubilizing these molecules. The aim of this study was to investigate the partitioning of red colorants from the fermented broth of Penicillium purpurogenum using an ATPPS composed of poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA). Red colorants partitioned preferentially to the top (PEG‐rich phase). In systems composed of PEG 6,000 g/mol/NaPA 8,000 g/mol, optimum colorant partition coefficient (K_C) was obtained in the presence of NaCl 0.1 M (K_C = 10.30) while the PEG 10,000 g/mol/NaPA 8,000 g/mol system in the presence of Na₂SO₄ 0.5 M showed the highest K_C (14.78). For both polymers, the mass balance (%MB) and yield in the PEG phase (%η_TOP) were close to 100 and 79%, respectively. The protein selectivity in all conditions evaluated ranged from 2.0–3.0, which shows a suitable separation of the red colorants and proteins present in the fermented broth. The results suggest that the partitioning of the red colorants is dependent on both the PEG molecular size and salt type. Furthermore, the results obtained support the potential application of ATPPS as the first step of a purification process to recover colorants from fermented broth of microorganisms. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1295–1304, 2015     

Response surface methodology for the extraction of wedelolactone from Eclipta alba using aqueous two-phase extraction

Abstract

Aqueous two-phase extraction of wedelolactone from Eclipta alba was studied using the polymer-salt system. The system consisted of polyethylene glycol (PEG) as a top phase (polymer) and sodium citrate as a bottom phase (salt). Process parameters such as PEG concentration, PEG molecular weight, salt concentration, and pH have been optimized using response surface methodology (RSM) with the help of central composite design (CCD). The optimized conditions for aqueous two-phase system (ATPS), in the case of one factor at a time approach, were found as PEG 6000, PEG concentration 18% (w/v), salt concentration 16% (w/v), and pH 7; with maximum extraction yield of 6.52?mg/g. While, RSM studies showed maximum extraction yield of 6.73?mg/g with the optimized parameters as PEG 6000, PEG concentration 18% (w/v), salt concentration 17.96% (w/v), and pH 7. ATPS was found to give a 1.3 fold increase in the extraction yield of wedelolactone as compared to other conventional extraction methods.     

Different types of aqueous two‐phase systems for biomolecule and bioparticle extraction and purification

Upstream improvements have led to significant advances in the productivity of biomolecules and bioparticles. Today, downstream processes are the bottleneck in the production of some biopharmaceuticals, a change from previous years. Current purification platforms will reach their physical limits at some point, indicating the need for new approaches. This article reviews an alternative method to extract and purify biomolecules/bioparticles named aqueous two‐phase system (ATPS). Biocompatibility and readiness to scale up are some of the ATPS characteristics. We also discuss some of ATPS applications in the biotechnology field. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1343–1353, 2013     

Aqueous two phase extraction of invertase from baker's yeast: Effect of process parameters on partitioning

Invertase (β-d-fructofuronoside fructohydrolase) is an industrially important enzyme useful for the hydrolysis of sucrose. The potential of aqueous two phase extraction for the isolation and purification of invertase from crude baker's yeast is explored. Influence of the process parameters such as type of phase forming salts, PEG molecular weight, concentration of salt and polymer, tie line length and volume ratio on partitioning of invertase was studied. PEG 3350/magnesium sulphate system was found most suitable for the extraction which has resulted in favorable pH (5 ± 0.2) for the enzyme extraction. Polymer and salt concentration were found to significantly affect the degree of purification and enzyme recovery of invertase. The purity of ∼8.81 fold was obtained compared to crude extract with recovery of 77% at the standardized process conditions. Overall results demonstrated the feasibility of aqueous two phase extraction for the isolation and purification of invertase without the need of multiple steps.     

Recovery of laccase from the residual compost of Agaricus bisporus in aqueous two-phase systems

The potential use of aqueous two-phase systems (ATPS) to establish a viable protocol for the recovery of laccase from the residual compost of Agaricus bisporus was evaluated. The evaluation of system parameters such as poly (ethylene glycol) (PEG) molecular mass, concentration of PEG as well as salt and system pH was carried out to determine under which conditions the laccase concentrates predominantly to the top PEG-rich phase. PEG 1000–phosphate ATPS proved to be suitable for the primary recovery of laccase. An extraction ATPS stage comprising volume ratio equal to 1.0, PEG 1000 18.2% (w/w), phosphate 15.0% (w/w), system pH of 7.0 and loaded with 5% (w/w) of crude extract from residual compost allowed the laccase recovery. The use of ATPS resulted in one-single primary recovery stage process that produced an overall yield of 95%. The results reported here demonstrated the potential application of ATPS for the valorisation of residual material and the potential establishment of a downstream process to obtain value added products with commercial application.     

Technical improvement in the purification of enzymes from red algae using an aqueous two-phase partitioning system

The effective elimination of phycobiliproteins from crude enzyme preparation of the red alga Caloglossa continua (Okamura) King et Puttock (Ceramiales, Florideophyceae) was investigated in an aqueous two‐phase partitioning system (ATPS) by changing the concentrations of polyethylene glycol (PEG) and ammonium sulfate (AS). The phycobiliproteins shifted from the AS‐rich lower phase to the PEG‐rich upper phase in high PEG and AS concentrations. The best ATPS condition for the elimination of phycobiliproteins from the lower phase was obtained by the combination of 20% (weight/volume; w/v) PEG and 16% (w/v) AS. However, the recovery of aldolase and mannitol‐1‐phos‐phatase activities was significantly reduced. For purification of the enzymes, a combination of 15% (w/v) PEG and 16% (w/v) AS was the best ATPS condition, because a high specific activity and recovery of the enzymes were obtained. Under these conditions, 98% of the phycobiliproteins were removed from the lower phase. Therefore, the ATPS proved to be a very useful method as a first step in the purification of enzymes from red algae.     

Scale‐up of hydrophobin‐assisted recombinant protein production in tobacco BY‐2 suspension cells

Plant suspension cell cultures are emerging as an alternative to mammalian cells for production of complex recombinant proteins. Plant cell cultures provide low production cost, intrinsic safety and adherence to current regulations, but low yields and costly purification technology hinder their commercialization. Fungal hydrophobins have been utilized as fusion tags to improve yields and facilitate efficient low‐cost purification by surfactant‐based aqueous two‐phase separation (ATPS) in plant, fungal and insect cells. In this work, we report the utilization of hydrophobin fusion technology in tobacco bright yellow 2 (BY‐2) suspension cell platform and the establishment of pilot‐scale propagation and downstream processing including first‐step purification by ATPS. Green fluorescent protein‐hydrophobin fusion (GFP‐HFBI) induced the formation of protein bodies in tobacco suspension cells, thus encapsulating the fusion protein into discrete compartments. Cultivation of the BY‐2 suspension cells was scaled up in standard stirred tank bioreactors up to 600 L production volume, with no apparent change in growth kinetics. Subsequently, ATPS was applied to selectively capture the GFP‐HFBI product from crude cell lysate, resulting in threefold concentration, good purity and up to 60% recovery. The ATPS was scaled up to 20 L volume, without loss off efficiency. This study provides the first proof of concept for large‐scale hydrophobin‐assisted production of recombinant proteins in tobacco BY‐2 cell suspensions.     

Purification of recombinant phenylalanine dehydrogenase by partitioning in aqueous two-phase systems

This study presents the partitioning and purification of recombinant Bacillus badius phenylalanine dehydrogenase (PheDH) in aqueous two-phase systems (ATPS) composed of polyethylene glycol 6000 (PEG-6000) and ammonium sulfate. A single-step operation of ATPS was developed for extraction and purification of recombinant PheDH from E. coli BL21 (DE3). The influence of system parameters including; PEG molecular weight and concentration, pH, (NH(4))(2)SO(4) concentration and NaCl salt addition on enzyme partitioning were investigated. The best optimal system for the partitioning and purification of PheDH was 8.5% (w/w) PEG-6000, 17.5% (w/w) (NH(4))(2)SO(4) and 13% (w/w) NaCl at pH 8.0. The partition coefficient, recovery, yield, purification factor and specific activity values were of 92.57, 141%, 95.85%, 474.3 and 10424.97 U/mg, respectively. Also the K(m) values for L-phenylalanine and NAD(+) in oxidative deamination were 0.020 and 0.13 mM, respectively. Our data suggested that this ATPS could be an economical and attractive technology for large-scale purification of recombinant PheDH.     

Trifluoroethanol‐containing RP‐HPLC mobile phases for the separation of transmembrane peptides human glycophorin‐A,integrin alpha‐1, and p24: analysis and prevention of potential side reactions due to formic acid

Reversed‐phase high‐pressure liquid chromatography analysis and purification of three hydrophobic, aggregation‐prone peptides, composed mainly of the transmembrane (TM) sequence, were performed using elution systems containing 2,2,2‐trifluoroethanol (TFE). The addition of 10–16% TFE to a common mobile phase, such as a water/acetonitrile/propanol (PrOH) or a water/PrOH/formic acid system, markedly improved the chromatographic separation of these peptides. The superior performance of TFE‐containing systems in separating peptides over water/PrOH/formic acid systems [Bollhagen R. et al., J. Chromatogr. A, 1995; 711 : 181–186.] clearly demonstrated that adding TFE to the mobile phase is one of best methods for TM‐peptide purification. Characterization of the potential side reactions using MALDI and ESI‐LIT/Orbitrap mass spectrometry indicated that prolonged incubation of peptides in a mixture of TFE–formic acid possibly induces O‐formylation of the Ser residue and N‐formylation of the N‐terminus of peptides. The conditions for selective removal of the formyl groups from TM peptides were also screened. We believe that these results will expand our ability to analyze and prepare hydrophobic, aggregation‐prone TM peptides and proteins. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

AQUEOUS TWO-PHASE EXTRACTION FOR THE PURIFICATION OF ALKALINE AGARASES FROM CULTURE EXTRACTS OF Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases—molecular weight of the PEG, system pH, system temperature, and NaCl concentration—were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.