Construction of a sequence-based bin map and mapping of QTLs for downy mildew resistance at four developmental stages in Chinese cabbage (<Emphasis Type="Italic">Brassica rapa</Emphasis> L. ssp. <Emphasis Type="Italic">pekinensis</Emphasis>)

Specific-locus amplified fragment sequencing is a high-resolution method for genetic mapping, genotyping, and single nucleotide polymorphism (SNP) marker discovery. Previously, a major QTL for downy mildew resistance, BraDM, was mapped to linkage group A08 in a doubled-haploid population derived from Chinese cabbage lines 91–112 and T12–19. The aim of the present study was to improve the linkage map and identify the genetic factors involved in downy mildew resistance. We detected 53,692 high quality SLAFs, of which 7230 were polymorphic, and 3482 of the polymorphic markers were used in genetic map construction. The final map included 1064 bins on ten linkage groups and was 858.98 cM in length, with an average inter-locus distance of 0.81 cM. We identified six QTLs that are involved in downy mildew resistance. The four major QTLs, sBrDM8, yBrDM8, rBrDM8, and hBrDM8, for resistance at the seedling, young plant, rosette, and heading stages were mapped to A08, and are identical to BraDM. The two minor resistance QTLs, rBrDM6 (A06) and hBrDM4 (A04), were active at the rosette and heading stages. The major QTL sBrDM8 defined a physical interval of ~228 Kb on A08, and a serine/threonine kinase family gene, Bra016457, was identified as the possible candidate gene. We report here the first high-density bin map for Chinese cabbage, which will facilitate mapping QTLs for economically important traits and SNP marker development. Our results also expand knowledge of downy mildew resistance in Chinese cabbage and provide three SNP markers (A08-709, A08-028, and A08-018) that we showed to be effective when used in MAS to breed for downy mildew resistance in B. rapa.     

Characterization of aphid resistance loci in black raspberry (<Emphasis Type="Italic">Rubus occidentalis</Emphasis> L.)

Viruses vectored by the aphid Amphorophora agathonica cause decline in black raspberry plant health resulting in a shortened life and poor fruit quality of the infected plantings. New aphid resistant cultivars could increase the longevity of plantings providing growers and processors with consistent fruit production. Recent exploration of the native range of black raspberry identified three sources of aphid resistance: Ag₄ from Ontario (ON), Canada, Ag₅ from Maine (ME), and a third source from Michigan (MI) with no formal designation. The objectives of this study were to assess segregation of these three sources of aphid resistance in populations with single and combined sources and develop markers that can identify each source of resistance. A genetic linkage map constructed for ORUS 4305 placed the ON aphid resistance locus on Rubus linkage group (RLG) 6. Segregation ratios in populations with single and combined sources, and linkage mapping in two populations (ORUS 4304 and ORUS 4812) segregating for the Ag₅ and MI sources, respectively, indicated that these three sources of resistance are each conferred by single dominant genes/alleles that are linked on RLG6. Confirmation of marker association in 16 validation populations identified four markers that could be used to predict resistance; however, none could distinguish between the ON and MI sources. These four markers may be useful for screening populations to enrich the field-planted progeny for aphid resistance. Fine mapping of the resistance loci is needed to develop functional markers at each of the resistance loci to enable pyramiding and durable aphid resistance.     

Mapping of chromosome loci determined manifestation of morphological and biochemical traits of quality in <Emphasis Type="Italic">Brassica rapa</Emphasis> L. crops

Mapping chromosomal loci responsible for seven morphological and five biochemical traits of quality in populations of doubled haploid lines of leafy, rooted, and oilseed crops of Brassica rapa L. species was performed for the first time. In total, 140 quantitative trait loci (QTLs) were mapped determining manifestation of the studied morphological and biochemical economically important traits of quality under field and greenhouse conditions; the control of the same traits under different growth conditions or simultaneous control of several traits by one locus were noted. Molecular markers genetically linked with the selected QTLs were detected. The block genomic structure of the genetic components (chromosomal loci and linkage groups) determining manifestation of morphological and biochemical traits of quality that make B. rapa plants nutritionally valuable is discussed for the first time. The conclusion is drawn that the revealed QTLs and identified molecular markers may be of interest for the forthcoming study of genetic control by them of economically important characters and for the marker assisted selection in B. rapa.     

Generation of Chinese cabbage resistant to bacterial soft rot by heterologous expression of <Emphasis Type="Italic">Arabidopsis WRKY75</Emphasis>

Soft rot caused by Pectobacterium carotovorum subsp. carotovorum (Pcc) is a serious disease in Chinese cabbage (Brassica rapa L. subsp. pekinensis). To reduce the severity of soft rot symptoms in Chinese cabbage, Arabidopsis AtWRKY75 was introduced into Chinese cabbage by Agrobacterium-mediated transformation, which was previously reported to reduce susceptibility to Pcc infection in Arabidopsis. Three independent Chinese cabbage transgenic lines carrying AtWRKY75 were obtained. The growth phenotypes of AtWRKY75 overexpression (OE) lines were normal. Bacterial soft rot symptoms and Pcc growth were reduced in AtWRKY75-OE Chinese cabbage lines compared with WT plants. In contrast, overexpression of AtWRKY75 had no effect on infection with a hemibiotrophic pathogen, Xanthomonas campestris pv. campestris (Xcc) causing black rot disease. These results are consistent with those observed in the transgenic Arabidopsis. We found that AtWRKY75 activated a subset of Chinese cabbage genes related to defense against Pcc infection, such as Meri15B, BrPR4, and BrPDF1.2 (but not BrPGIP2). Moreover, overexpression of AtWRKY75 caused H₂O₂ production and activation of H₂O₂ scavenge enzyme genes, suggesting that H₂O₂ played a role in AtWRKY75-mediated resistance to Pcc. Together, these results demonstrated that AtWRKY75 decreased the severity of Pcc-caused bacterial soft rot and activated a subset of Pcc infection defense-related genes in Chinese cabbage similar to in Arabidopsis. It is suggested that AtWRKY75 is a candidate gene for use in crop improvement, because it results in reduced severity of disease symptoms without concurrent growth abnormalities.     

Molecular cloning and characterization of a PR-5 like protein gene from <Emphasis Type="Italic">Brassica campestris</Emphasis> ssp. <Emphasis Type="Italic">chinensis</Emphasis>

Downy mildew caused by Hyaloperonospora parasitica is a serious fungal disease in non-heading Chinese cabbage (Brassica campestris L. ssp. chinensis Makino). Pathogenesis-related 5 (PR-5) genes play an important role in plant resistance to disease invasion. In this study, a gene encoding pathogenesis-related 5-like (PR-5L) protein, named BcPR-5L, was successfully cloned from non-heading Chinese cabbage. The cDNA sequence of BcPR-5L was 747 bp in length. It encoded a protein of molecular mass of 25.78 kDa, an isoelectric point of 4.42, and containing 248 amino acids. Multiple sequence alignment indicated that BcPR-5L protein was highly homologous to other PR-5L proteins identified in 13 different species, with the highest homology to Brassica rapa. We analyzed the subcellular localization of BcPR-5L protein by using onion epidermal cells and found that it was localized in the membrane. Real time quantitative PCR analyses revealed that the expression of BcPR-5L gene was significantly upregulated after H. parasitica infection, and the expression in the resistant cultivar was higher than that in the susceptible cultivar. In summary, our data suggest that BcPR-5L gene may play an important role in the resistance of non-heading Chinese cabbage to H. parasitica infection.     

Identification of candidate genes of QTLs for seed weight in <Emphasis Type="Italic">Brassica napus</Emphasis> through comparative mapping among <Emphasis Type="Italic">Arabidopsis</Emphasis> and <Emphasis Type="Italic">Brassica</Emphasis>species

Background

Map-based cloning of quantitative trait loci (QTLs) in polyploidy crop species remains a challenge due to the complexity of their genome structures. QTLs for seed weight in B. napus have been identified, but information on candidate genes for identified QTLs of this important trait is still rare.

Results

In this study, a whole genome genetic linkage map for B. napus was constructed using simple sequence repeat (SSR) markers that covered a genetic distance of 2,126.4 cM with an average distance of 5.36 cM between markers. A procedure was developed to establish colinearity of SSR loci on B. napus with its two progenitor diploid species B. rapa and B. oleracea through extensive bioinformatics analysis. With the aid of B. rapa and B. oleracea genome sequences, the 421 homologous colinear loci deduced from the SSR loci of B. napus were shown to correspond to 398 homologous loci in Arabidopsis thaliana. Through comparative mapping of Arabidopsis and the three Brassica species, 227 homologous genes for seed size/weight were mapped on the B. napus genetic map, establishing the genetic bases for the important agronomic trait in this amphidiploid species. Furthermore, 12 candidate genes underlying 8 QTLs for seed weight were identified, and a gene-specific marker for BnAP2 was developed through molecular cloning using the seed weight/size gene distribution map in B. napus.

Conclusions

Our study showed that it is feasible to identify candidate genes of QTLs using a SSR-based B. napus genetic map through comparative mapping among Arabidopsis and B. napus and its two progenitor species B. rapa and B. oleracea. Identification of candidate genes for seed weight in amphidiploid B. napus will accelerate the process of isolating the mapped QTLs for this important trait, and this approach may be useful for QTL identification of other traits of agronomic significance.

     

Development of an STS map of an interspecific progeny of <Emphasis Type="Italic">Malus</Emphasis>

Simple sequence repeat (SSR) markers developed from Malus, as well as Prunus, Pyrus and Sorbus, and some other sequence-tagged site (STS) loci were analysed in an interspecific F₁ apple progeny from the cross ‘Fiesta’ × ‘Totem’ that segregated for several agronomic characters. A linkage map was constructed using 259 STS loci (247 SSRs, four SCARs and eight known-function genes) and five genes for agronomic traits—scab resistance (Vf), mildew resistance (Pl-2), columnar growth habit (Co), red tissues (Rt) and green flesh background colour (Gfc). Ninety SSR loci and three genes (ETR1, Rt and Gfc) were mapped for the first time in apple. The transferability of markers from other Maloideae to Malus was found to be around 44%. The loci are spread across 17 linkage groups, corresponding to the basic chromosome number of Malus and cover 1,208 cM, approximately 85% of the estimated length of the apple genome. Interestingly, we have extended the top of LG15 with eight markers covering 25 cM. The average map density is 4.7 cM per marker; however, marker density varies greatly between linkage groups, from 2.5 in LG14 to 8.9 in LG7, with some areas of the genome still in need of further STS markers for saturation.     

Genetic mapping of <Emphasis Type="Italic">psl</Emphasis> locus and quantitative trait loci for angular leaf spot resistance in cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.)

One of the most important cucumber diseases is bacterial angular leaf spot (ALS), whose increased occurrence in open-field production has been observed over the last years. To map ALS resistance genes, a recombinant inbred line (RIL) mapping population was developed from a narrow cross of cucumber line Gy14 carrying psl resistance gene and susceptible B10 line. Parental lines and RILs were tested under growth chamber conditions as well as in the field for angular leaf spot symptoms. Based on simple sequence repeat and DArTseq, genotyping a genetic map was constructed, which contained 717 loci in seven linkage groups, spanning 599.7 cM with 0.84 cM on average between markers. Monogenic inheritance of the lack of chlorotic halo around the lesions, which is typical for ALS resistance and related with the presence of recessive psl resistance gene, was confirmed. The psl locus was mapped on cucumber chromosome 5. Two major quantitative trait loci (QTL) psl5.1 and psl5.2 related to disease severity were found and located next to each other on chromosome 5; moreover, psl5.1 was co-located with psl locus. Identified QTL were validated in the field experiment. Constructed genetic map and markers linked to ALS resistance loci are novel resources that can contribute to cucumber breeding programs.     

Genetic mapping and development of co-segregating markers of <Emphasis Type="Italic">RpsQ</Emphasis>, which provides resistance to <Emphasis Type="Italic">Phytophthora sojae</Emphasis> in soybean

Key message

The RpsQ Phytophthora resistance locus was finely mapped to a 118-kb region on soybean chromosome 3. A best candidate gene was predicted and three co-segregating gene markers were developed.

Abstract

Phytophthora root rot (PRR), caused by Phytophthora sojae, is a major threat to sustainable soybean production. The use of genetically resistant cultivars is considered the most effective way to control this disease. The Chinese soybean cultivar Qichadou 1 exhibited a broad spectrum resistance, with a distinct resistance phenotype, following inoculation with 36 Chinese P. sojae isolates. Genetic analyses indicated that the disease resistance in Qichadou 1 is controlled by a single dominant gene. This gene locus was designated as RpsQ and mapped to a 118-kb region between BARCSOYSSR_03_0165 and InDel281 on soybean chromosome 3, and co-segregated with Insert11, Insert144 and SNP276. Within this region, there was only one gene Glyma.03g27200 encoding a protein with a typical serine/threonine protein kinase structure, and the expression pattern analysis showed that this gene induced by P. sojae infection, which was suggested as a best candidate gene of RpsQ. Candidate gene specific marker Insert144 was used to distinguish RpsQ from the other known Rps genes on chromosome 3. Identical polymerase chain reaction amplification products were produced for cultivars Qichadou 1 (RpsQ) and Ludou 4 (Rps9). All other cultivars carrying Rps genes on chromosome 3 produced different PCR products, which all lacked a 144-bp fragment present in Qichadou 1 and Ludou 4. The phenotypes of the analyzed cultivars combined with the physical position of the PRR resistance locus, candidate gene analyses, and the candidate gene marker test revealed RpsQ and Rps9 are likely the same gene, and confer resistance to P. sojae.

     

Evidence of intralocus recombination at the <Emphasis Type="Italic">Glu-3</Emphasis> loci in bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Key message

Recombination at the Glu-3 loci was identified, and strong genetic linkage was observed only between the amplicons representing i-type and s-type genes located, respectively, at the Glu-A3 and Glu-B3 loci.

Abstract

The low-molecular weight glutenin subunits (LMW-GSs) are one of the major components of wheat seed storage proteins and play a critical role in the determination of wheat end-use quality. The genes encoding this class of proteins are located at the orthologous Glu-3 loci (Glu-A3, Glu-B3, and Glu-D3). Due to the complexity of these chromosomal regions and the high sequence similarity between different LMW-GS genes, their organization and recombination characteristics are still incompletely understood. This study examined intralocus recombination at the Glu-3 loci in two recombinant inbred line (RIL) and one doubled haploid (DH) population, all segregating for the Glu-A3, Glu-B3, and Glu-D3 loci. The analysis was conducted using a gene marker system that consists of the amplification of the complete set of the LMW-GS genes and their visualization by capillary electrophoresis. Recombinant marker haplotypes were detected in all three populations with different recombination rates depending on the locus and the population. No recombination was observed between the amplicons representing i-type and s-type LMW-GS genes located, respectively, at the Glu-A3 and Glu-B3 loci, indicating tight linkage between these genes. Results of this study contribute to better understanding the genetic linkage and recombination between different LMW-GS genes, the structure of the Glu-3 loci, and the development of more specific molecular markers that better represent the genetic diversity of these loci. In this way, a more precise analysis of the contribution of various LMW-GSs to end-use quality of wheat may be achieved.

     

Antifungal and Biocontrol Evaluation of Four <Emphasis Type="Italic">Lysobacter</Emphasis> Strains Against Clubroot Disease

The effect of crude extract (Ce), seed coating agent (SCA) and whole bacterial broth culture (WBC) of Lysobacter strains was evaluated against the causal agent of clubroot formation in Cruciferous vegetables. The ability of four Lysobacter strains (L. antibioticus 6-B-1, L. antibioticus 6-T-4, L. antibioticus 13-B-1 and L. capsici ZST1-2) inhibited Plasmodiophora brassicae of resting spores and disease. Application of WBC of four Lysobacter strains inhibited clubroot disease, indicating that the disease suppression was due to antifungal compounds produced by the biocontrol bacterium in the culture. Development of clubroot on Chinese cabbage was inhibited when the WBC and SCA were applied before P. brassicae inoculation. Crude extract (Ce) of culture filtrate was effective in arresting the germination of resting spores of P. brassicae on slides. However, Lysobacter strains differed in their biocontrol effects, the strain L. capsci ZST1-2 recorded a high level of disease limiting effect.     

BrFLC5: a weak regulator of flowering time in <Emphasis Type="Italic">Brassica rapa</Emphasis>

Key message

A splicing site mutation in BrFLC5, a non-syntenic paralogue of FLOWERING LOCUS C, was demonstrated to be related to flowering time variation in Brassica rapa.

Abstract

Flowering time regulation in Brassica rapa is more complex than in Arabidopsis, as there are multiple paralogues of flowering time genes in B. rapa. Brassica rapa contains four FLOWERING LOCUS C (FLC) genes, three of which are syntenic orthologues of AtFLC, while BrFLC5 is not. BrFLC1, BrFLC2, and BrFLC3 have been reported to be involved in flowering time regulation. However, BrFLC5 has thus far been deemed a pseudogene. We detected two alternative splicing patterns of BrFLC5 resulting from a nucleotide mutation (G/A) at the first nucleotide of intron 3 (named as Pi3+1(G/A)). Genotyping of BrFLC5Pi3?+?1(G/A) for 301 B. rapa accessions showed that this single nucleotide polymorphism was significantly related to flowering time variation (p?<?0.001). In the collection, the frequency of the functional G allele (35.2%) was much lower than that of the nonfunctional A allele (59.1%); however, the frequency of the G allele was very high among the turnips (83.6%). An F2 population segregating at this locus was developed to analyze the genetic effect of BrFLC5. The result showed that the G allele individuals began to bolt two days later than the A allele individuals, indicating that BrFLC5 is a weak regulator of flowering time. BrFLC5 was expressed at the lowest level among the three analyzed BrFLCs. The late allele (G allele) was dominant to the early allele (A allele) at the BrFLC5 locus, which was in contrast to that of BrFLC1 and BrFLC2. This characteristic suggests that BrFLC5 would be more efficient for breeding premature bolting resistance in B. rapa.

     

Genetic analyses of resistance to the peach root-knot nematode (<Emphasis Type="Italic">Meloidogyne floridensis</Emphasis>) using microsatellite markers

Most commercially important rootstocks for peach [Prunus persica (L.) Batsch] had been selected for resistance to one or more of the root-knot nematode (RKN) species: Meloidogyne incognita, M. arenaria, and M. javanica. The peach root-knot nematode, M. floridensis (MF), is a relatively newly discovered threat to peach and is not controlled by resistance genes in “Nemared,” “Nemaguard,” and “Okinawa.” The “Flordaguard” peach seedling rootstock, conventionally bred to provide resistance to MF, has solely been used for low-chill peach production in Florida for over 20 years and has already shown signs of resistance breakdown. A source of high resistance to the pathogenic MF isolate (“MFGnv14”) was identified from wild peach Prunus kansuensis Rehder (Kansu peach), thereby suggesting the potential for broadening spectrum and increasing durability of resistance in peach rootstocks through interspecific hybridization with P. kansuensis. Using 12 F₂ and BC₁F₁ populations derived from crosses between Okinawa or Flordaguard peach and P. kansuensis populations, we examined the genetic control for MF resistance by identifying associated microsatellite markers and determining genomic location of the resistance locus. One microsatellite marker (UDP98-025) showed strong and consistent association with resistance based on root-galling index. The resistance locus was mapped on the subtelomeric region of linkage group 2, co-localizing with other previously reported RKN resistance genes in Prunus. Segregation of gall-index-based resistance observed in F₂ and BC₁F₁ populations is compatible with the involvement of a multiallelic locus wherein a dominant (Mf₁) or recessive (mf₃) resistance allele is inherited from P. kansuensis, and susceptibility alleles (mf₂) from peach.     

Stable expression of exogenous imported <Emphasis Type="Italic">sporamin</Emphasis> in transgenic Chinese cabbage enhances resistance against insects

Cultivating insect pest-resistant varieties is one of the most effective ways to prevent or mitigate pest infestation in Chinese cabbage (Brassica campestris ssp. chinensis). Via the agrobacterium tumefaciens-mediated transformation method, this study introduced the protease inhibitor encoding gene sporamin into two widely cultured cultivars ‘Youdonger’ and ‘Shanghaiqing’, of the common variety of Chinese cabbages (B. campestriss ssp. chinensis var. communis), getting transgenic plants with high sporamin expression. In vitro insect bioassays indicated that, compared with the wild type plants, the transgenic plants exhibited improved resistance to diamondback moth (Plutella xylostella L.) The analysis of inheritance pattern of exogenous sporamin in the progenies of single copy insertion transgenic lines demonstrated that sporamin could be inherited and expressed stably in transgenic progenies. Field survey of the insect resistance under the normal culture condition confirmed the enhanced resistance in transgenic progenies to diamondback moth. Our results strongly suggest that sporamin is an efficient candidate gene for insect-resistant genetic engineering in Chinese cabbage.     

Mapping and validation of a new QTL for adult-plant resistance to powdery mildew in Chinese elite bread wheat line Zhou8425B

Key message

Four QTLs for adult-plant resistance to powdery mildew were mapped in the Zhou8425B/Chinese Spring population, and a new QTL on chromosome 3B was validated in 103 wheat cultivars derived from Zhou8425B.

Abstract

Zhou8425B is an elite wheat (Triticum aestivum L.) line widely used as a parent in Chinese wheat breeding programs. Identification of genes for adult-plant resistance (APR) to powdery mildew in Zhou8425B is of high importance for continued controlling the disease. In the current study, the high-density Illumina iSelect 90K single-nucleotide polymorphism (SNP) array was used to map quantitative trait loci (QTL) for APR to powdery mildew in 244 recombinant inbred lines derived from the cross Zhou8425B/Chinese Spring. Inclusive composite interval mapping identified QTL on chromosomes 1B, 3B, 4B, and 7D, designated as QPm.caas-1BL.1, QPm.caas-3BS, QPm.caas-4BL.2, and QPm.caas-7DS, respectively. Resistance alleles at the QPm.caas-1BL.1, QPm.caas-3BS, and QPm.caas-4BL.2 loci were contributed by Zhou8425B, whereas that at QPm.caas-7DS was from Chinese Spring. QPm.caas-3BS, likely to be a new APR gene for powdery mildew resistance, was detected in all four environments. One SNP marker closely linked to QPm.caas-3BS was transferred into a semi-thermal asymmetric reverse PCR (STARP) marker and tested on 103 commercial wheat cultivars derived from Zhou8425B. Cultivars with the resistance allele at the QPm.caas-3BS locus had averaged maximum disease severity reduced by 5.3%. This STARP marker can be used for marker-assisted selection in improvement of the level of powdery mildew resistance in wheat breeding.

     

A new leaf rust resistance gene <Emphasis Type="Italic">Lr79</Emphasis> mapped in chromosome 3BL from the durum wheat landrace Aus26582

Key message

A new leaf rust resistance gene Lr79 has been mapped in the long arm of chromosome 3B and a linked marker was identified for marker-assisted selection.

Abstract

Aus26582, a durum wheat landrace from the A. E. Watkins Collection, showed seedling resistance against durum-specific and common wheat-specific Puccinia triticina (Pt) pathotypes. Genetic analysis using a recombinant inbred line (RIL) population developed from a cross between Aus26582 and the susceptible parent Bansi with Australian Pt pathotype showed digenic inheritance and the underlying loci were temporarily named LrAW2 and LrAW3. LrAW2 was located in chromosome 6BS and this study focused on characterisation of LrAW3 using RILs lacking LrAW2. LrAW3 was incorporated into the DArTseq map of Aus26582/Bansi and was located in chromosome 3BL. Markers linked with LrAW3 were developed from the chromosome survey sequence contig 3B_10474240 in which closely-linked DArTseq markers 1128708 and 3948563 were located. Although bulk segregant analysis (BSA) with the 90 K Infinium array identified 51 SNPs associated with LrAW3, only one SNP-derived KASP marker mapped close to the locus. Deletion bin mapping of LrAW3-linked markers located LrAW3 between bins 3BL11-0.85-0.90 and 3BL7-0.63. Since no other all stage leaf rust resistance gene is located in chromosome 3BL, LrAW3 represented a new locus and was designated Lr79. Marker sun786 mapped 1.8 cM distal to Lr79 and Aus26582 was null for this locus. However, the marker can be reliably scored as it also amplifies a monomorphic fragment that serves as an internal control to differentiate the null status of Aus26582 from reaction failure. This marker was validated among a set of durum and common wheat cultivars and was shown to be useful for marker-assisted selection of Lr79 at both ploidy levels.

     

Molecular mapping of a rust resistance gene <Emphasis Type="Italic">R</Emphasis><Subscript><Emphasis Type="Italic">14</Emphasis></Subscript> in cultivated sunflower line PH 3

Sunflower, the fifth largest oilseed crop in the world, plays an important role in human diets. Recently, sunflower production in North America has suffered serious yield losses from newly evolved races of sunflower rust (Puccinia helianthi Schwein.). The rust resistance gene, designated R ₁₄ , in a germplasm line PH 3 originated from a wild Helianthus annuus L. population resistant to 11 rust races. PH 3 has seedling with an extraordinary purple hypocotyl color. The objectives of this study were to map both the R ₁₄ rust resistance gene and the purple hypocotyl gene-designated PHC in PH 3, and to identify molecular markers for marker-assisted breeding for sunflower rust resistance. A set of 517 mapped SSR/InDel and four SNP markers was used to detect polymorphisms between the parents. Fourteen markers covering a genetic distance of 17.0 cM on linkage group (LG) 11 were linked to R ₁₄ . R ₁₄ was mapped to the middle of the LG, with a dominant SNP marker NSA_000064 as the closest marker at a distance of 0.7 cM, and another codominant marker ORS542 linked at 3.5 cM proximally. One dominant marker ZVG53 was linked on the distal side at 6.9 cM. The PHC gene was also linked to R ₁₄ with a distance of 6.2 cM. Chi-squared analysis of the segregation ratios of R ₁₄ , PHC, and ten linked markers indicated a deviation from an expected 1:2:1 or 3:1 ratio. The closely linked molecular or morphological markers could facilitate sunflower rust-resistant breeding and accelerate the development of rust-resistant hybrids.     

<Emphasis Type="Italic">FaRCg1</Emphasis>: a quantitative trait locus conferring resistance to Colletotrichum crown rot caused by <Emphasis Type="Italic">Colletotrichum gloeosporioides</Emphasis> in octoploid strawberry

Colletotrichum crown rot (CCR) is an important disease of strawberry (Fragaria?×ananassa) throughout the Southeastern US and in subtropical climates around the world, where hot and humid conditions facilitate rapid disease development. Yet no resistance loci have been described to date, as genetic studies have been historically difficult in allo-octoploid (2n?=?8x?=?56) strawberry. In the present study, we investigate the genetic architecture of resistance to CCR. Four population sets from the University of Florida were inoculated in four different seasons from 2013–2014 to 2016–2017. Two large, multiparental discovery population sets were used for QTL discovery, and two validation sets of cultivars and advanced selections representing the parent pool of the breeding program were also assessed. Subgenome-specific single-nucleotide polymorphism (SNP) markers were mapped, and FlexQTL? software was utilized to perform a Bayesian, pedigree-based QTL analysis. A quantitative trait locus on linkage group 6B, which we name FaRCg1, accounts for most of the genetic variation for resistance in the discovery sets (26.8–29.8% in 2013–2014 and 17% in 2015–2016). High-throughput marker assays were developed for the most significant SNPs which correlated with the mode of the QTL region. The discovery and characterization of the FaRCg1 locus and the molecular tools developed from it will be utilized to achieve increased genetic gains for resistance.     

Genetic structure of the populations of <Emphasis Type="Italic">Dactylorhiza ochroleuca</Emphasis> and <Emphasis Type="Italic">D. incarnata</Emphasis> (Orchidaceae) in the area of their joint growth in Russia and Belarus

We carried out an allozyme analysis to investigate polymorphism and genetic structure of the populations of D. incarnata and D. ochroleuca in regions of their joint growth in Russia and Belarus. We found that D. ochroleuca individuals in the populations of the Urals and Siberia, which are distant fragments from the main range of the species, do not differ significantly from individuals within the main part of the area (Belarus) on the basis of the allelic composition of eight gene loci. We revealed that D. ochroleuca and D. incarnata are differentiated by different alleles of the GDH locus. Thus, we established a genetic marker suitable to distinguish these closely related taxa. In addition to the GDH locus, D. ochroleuca and D. incarnata in the places of their joint growth, differ in the allelic structure of the PGI and NADHD loci. D. incarnata from the Urals and Siberia were polymorphic for both loci, and individuals from Belarus were polymorphic for one locus (PGI). In contrast, all D. ochroleuca individuals growing in sympatric populations with polymorphic D. incarnata were homozygous for the same alleles. Thus, comparison of the genetic structure of D. ochroleuca and D. incarnata points to the existence of a genetic isolation and a functioning isolation mechanism even under conditions of their joint growth. We found that the GDH locus in D. incarnata is polymorphic only in populations which grow together with D. ochroleuca, with exception a few examples. Thus, we conclude that variability of the GDH locus in D. incarnata is associated with hybridization with D. ochroleuca.