Two biosensors for phenolic compounds based on mushroom (Agaricus bisporus) homogenate: comparison in terms of some important parameters of the biosensors

Interest in molecular imprinted polymer techniques has increased because they allows for the improvement of some stability characteristics of enzymes. The high stability of molecularly imprinted enzymes for a substrate can make them ideal alternatives as recognition elements for sensors. A bioimprinted mushroom tissue homogenate biosensor was constructed in a very simple way. For this purpose, sulfite was used. The enzyme, polyphenol oxidase, was first complexed by using a competitive inhibitor, sulfite, in aqueous medium and then the enzyme was immobilized on gelatin by crosslinking with glutaraldehyde on a glass electrode surface. Similarly, polyphenol oxidase uncomplexed with sulfite was also immobilized on a glass electrode in the same conditions. The aim of the study was to compare the two biosensors in terms of their repeatability and thermal, pH, and operational stability; also, the linear ranges of the two biosensors were compared with each other.     

Sulfite oxidase from Merluccius productus

Sulfite oxidase (sulfite:oxygen oxidoreductase, EC 1.8.3.1) was purified 482-fold from liver of the Pacific hake Merluccius productus. The molecular weight of the enzyme was found to be 120 000 by gel exclusion chromatography on Sephadex G-100. Electrophoretic analysis on sodium dodecyl sulfate (SDS)-polyacrylamide gel revealed that the enzyme was composed of two subunits whose molecular weight was estimated to be 60 000. The pH optimum of the enzyme was 8.7; Ks for sulfite, 2.5 x 10(-5) M; and that for cytochrome c, 3.6 x 10(-7) M. The enzyme elicited an EPR signal at g = 1.97 characteristic of pentavalent molybdenum. Colorimetric analysis also disclosed that the enzyme contained 2 mol each of heme and molybdenum per mol of protein. This fish liver homogenate in isotonic sucrose solution was fractionated by differential centrifugation into nuclei, mitochondria, microsomes and supernatant (100 000 X g). The major portion of sulfite oxidase activity was found in mitochondria. The sulfite oxidase activity was markedly high in liver and kidney, as compared with that in heart, spleen, muscle, gill and eye.     

A high throughput method to investigate oligodeoxyribonucleotide hybridization kinetics and thermodynamics.

We describe a high throughput microtiter-based assay to measure binding of oligodeoxyribonucleotides to nucleic acid targets. The assay utilizes oligodeoxyribonucleotide probes labeled with a highly chemiluminescent acridinium ester (AE). Reaction of AE with sodium sulfite renders it non-chemiluminescent. When an AE-labeled probe hybridizes to a target nucleic acid AE is protected from reaction with sodium sulfite and thus remains chemiluminescent. In contrast, unhybridized probe readily reacts with sodium sulfite and is rendered non-chemiluminescent. Hybridization of an AE-labeled probe to a target nucleic acid can therefore be detected without physical separation of unhybridized probe by treatment of the hybridization reaction with sodium sulfite and measurement of the remaining chemiluminescence. Using this method we measured hybridization rate constants and thermodynamic affinities of oligodeoxyribonucleotide probes binding to simple synthetic targets as well as large complex biological targets. The kinetic and thermodynamic parameters were measured with a high degree of accuracy and were in excellent agreement with values measured by other established techniques.     

二氧化硫衍生物对玉米种子萌发、幼苗生长和细胞分裂的影响

研究3种二氧化硫衍生物硫酸钠、亚硫酸钠和亚硫酸氢钠对玉米种子萌发、幼苗生长和细胞分裂的影响。结果表明,一定浓度(0.1 mmol·L^-1)的硫酸盐和亚硫酸盐处理液能促进玉米种子萌发和幼苗生长,但浓度超过2.5 mmol·L^-1时能抑制种子萌发和幼苗生长。较高浓度的3种盐溶液对根尖分生区细胞的分裂具有抑制作用,并导致其中的部分细胞异常,出现细胞核固缩,甚至产生质壁分离。3种二氧化硫衍生物的毒性排序为：亚硫酸氢钠＞亚硫酸钠＞硫酸钠。     

In vitro incorporation of nascent molybdenum cofactor into human sulfite oxidase

We were able to reconstitute molybdopterin (MPT)-free sulfite oxidase in vitro with the molybdenum cofactor (Moco) synthesized de novo from precursor Z and molybdate. MPT-free human sulfite oxidase apoprotein was obtained by heterologous expression in an Escherichia coli mutant with a defect in the early steps of MPT biosynthesis. In vitro reconstitution of the purified apoprotein was achieved using an incubation mixture containing purified precursor Z, purified MPT synthase, and sodium molybdate. In vitro synthesized MPT generated from precursor Z by MPT synthase remains bound to the synthase. Surprisingly, MPT synthase was found capable of donating bound MPT to MPT-free sulfite oxidase. MPT was not released from MPT synthase when either bovine serum albumin or Moco-containing sulfite oxidase was used in place of aposulfite oxidase. After the inclusion of sodium molybdate in the reconstitution mixture, active sulfite oxidase was obtained, revealing that in vitro MPT synthase and aposulfite oxidase are sufficient for the insertion of MPT into sulfite oxidase and the conversion of MPT into Moco in the presence of high concentrations of molybdate. The conversion of MPT into Moco by molybdate chelation apparently occurs concomitantly with the insertion of MPT into sulfite oxidase.     

Biosensors for determination of total and natural antioxidant capacity of red and white wines: comparison with other spectrophotometric and fluorimetric methods

Research was carried out to experimentally evaluate the antioxidant capacity of several red and white wines using a superoxide dismutase (SOD) biosensor recently developed by the present authors. Measurements were performed by comparing the biosensor response to increasing concentration of the superoxide radical produced in solution by the xanthine/xanthine oxidase system, both in the presence and absence of the test sample.The results were compared with those of two traditional spectrophotometric methods and of a spectrofluorimetric method described in literature.Lastly, also the polyphenol, sulfite and ascorbic acid contents of the different wine samples examined were measured using a tyrosinase biosensor, a sulfite oxidase biosensor and an ascorbate oxidase biosensor, respectively.     

Kinetics of renin inhibition by sodium houttuyfonate analogs

A series of chemical analogs of sodium houttuynin, the major constituent in the volatile oil of the perennial plant Houttuynia cordata Thunb, were studied for in vitro inhibition of renin activity. At a reaction concentration of 0.196 mg/ml, each of the sodium houttuynin analogs (SHAs), viz., hexanoyl acetal sodium sulfite (SHA-C6), octanoyl acetal sodium sulfite (SHA-C8), decanoyl acetal sodium sulfite (SHA-C10), dodecanoyl acetal sodium sulfite (SHA-C12) and tetradecanoyl acetal sodium sulfite (SHA-C14), inhibited renin activity up to 34.37%, 44.03%, 79.33%, 83.04%, and 93.19% respectively. The IC50 values (the concentration of SHA that is required to reduce renin activity by 50%) of the most potent analogs were 273, 195, and 44 microM for SHA-C10, SHA-C12, and SHA-C14 respectively. Kinetic studies with SHA-14 indicated a linear mixed-type of enzyme inhibition with a Ki value of 45.35 microM. It was concluded that the SHAs constitute potentially useful ingredients for the formulation of antihypertensive products.     

Identification and characterization of an anion-sensitive Mg2+-ATPase in pituitary secretory granule membranes

We have identified an anion-sensitive Mg2+-ATPase in adenohypophyseal secretory granule membranes. This enzyme is unaffected by sodium, ouabain, and calcium. By electron microscopic morphology, sedimentation properties, nucleotide substrate utilization, and marker enzyme studies, this activity is clearly shown to be intrinsic to the granule membranes. The kinetics for ATP saturation were complex, as curvilinear Lineweaver-Burk plots were obtained with 2 mM magnesium. However, an approach to linearity was obtained (Km for ATP, approximately 0.27 mM) with low concentrations of free magnesium. Many anions and anion-transport blockers significantly influenced enzyme activity. Stimulatory anions in decreasing order of potency were bisulfite greater than sulfite greater than isethionate greater than bicarbonate; Ka values were 2.5 mM for sulfite and 10.8 mM for bicarbonate. Acetate, borate, chloride, citrate, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, 2-(N-morpholino)ethanesulfonic acid, nitrite, oxalate, 1,3-piperazinediethanesulfonic acid, and sulfate were without major effect. Inhibitory anions in decreasing potency order were azide greater than thiocyanate greater than fluoride greater than nitrate. Anionic stimulation of the granule membrane Mg2+-ATPase linearized the Lineweaver-Burk plots by shifting the enzyme to its higher Km state. In addition, sulfite competitively reversed the produce inhibition exerted by ADP. Anion transport-blockers inhibited the enzyme; of those tested, the most potent was 4-acetamido-4-isothiocyano-stilbene-2,2'-disulfonic acid, with a Ki of 0.17 mM; pyridoxal phosphate, sulfisoxazole, and ethacrynic acid also inhibited enzyme activity. The protein-binding dye p-sulfobenzene-azo-o-sulfobenzene-azo-beta-naphthol-3,6-disulfonic acid, structurally similar to transport blockers, was a potent inhibitor, with a Ki of 2.8 mM. These data on pituitary secretory granule ATPase raise the possibility that the granule membranes may function in anion or proton transport, perhaps in relation to exocytosis and hormone secretion.     

Purification of prosthetically intact sulfite oxidase from chicken liver using a modified procedure

A modified procedure was used to purify sulfite oxidase (sulfite:O2 oxidoreductase; EC 1.8.3.1) from chicken liver in high yield. The modifications included dialysis of the enzyme against a buffered solution containing sodium molybdate (prior to ion-exchange chromatography), which apparently reconstituted any demolybdo enzyme present in the extract, and phenyl-Sepharose column chromatography. Analysis showed that the purified enzyme contained Mo and heme in a 1.03:1.00 ratio, indicating that the enzyme was prosthetically intact; exogenous heme and other colored proteins were absent from the final pool. Treatment of the sulfite-reduced enzyme with 50 mM cyanide at pH 8.5 resulted in a gradual loss of catalytic activity with a half-life of 19.7 min. Analysis of the cyanide-inactivated enzyme gave a Mo:heme ratio of 1.02:1.00, providing the first direct evidence that the enzyme does not lose molybdenum when inactivated with cyanide. This modified purification procedure provides enzyme in high yield which is well-suited for experiments requiring prosthetically intact enzyme and which is not contaminated with extraneous heme or with other redox active proteins.     

Use of competitive inhibition for driving sensitivity and dynamic range of urea ENFETs

An urea biosensor based on urease-BSA (bovine serum albumin) membrane immobilised on the surface of an ion-sensitive field effect transistor (ISFET) has been studied in a mix buffer solution composed of potassium phosphate, Tris, citric acid and sodium tetraborate. In this mix buffer, the biosensor showed a dynamic larger than the one observed in a phosphate or Tris buffer. Investigation of the individual effect of each component of the buffer solution on the biosensor response has shown that tetraborate anion acts as a strong competitive inhibitor for the hydrolysis reaction of urea catalysed by urease. The biosensor response was investigated in a phosphate buffer with different concentrations of tetraborate anion. The results showed that the apparent constant of Michaelis-Menten, K(m(app)), increases from 4.3 to 79.3 mM, for experiments realised without and with 0.5 mM sodium tetraborate, respectively. The mean value, determined graphically, for the inhibition constant, K(i), was 29 microM. The graphical representation of biosensor calibration curves in semilogarithmic co-ordinates showed that the linear range of the biosensor can be extended up to three orders of magnitude, allowing an urea detection in a concentration range 0-100 mM.     

Purification and biochemical characterization of tellurite-reducing activities from Thermus thermophilus HB8.

Cell-free extracts of Thermus thermophilus HB8 catalyze the in vitro, NADH-dependent reduction of potassium tellurite (K2TeO3). Three different protein fractions with tellurite-reducing activities were identified. Two exhibited high molecular weight and were composed of at least two different polypeptides. The protein in the third fraction was purified to homogeneity and had a single polypeptide chain of 53 to 54 kilodaltons, with an isoelectric point of 8.1. Each enzyme was thermostable, the temperature optimum was 75 degrees C, and 30 mM NaCl, 1.5 M urea, or 0.004% sodium dodecyl sulfate caused 50% inhibition of the enzymes. However, 2% Triton X-100 did not have an inhibitory effect. The enzymes were also able to catalyze the reduction of sodium selenite and sodium sulfite in vitro. NADH was replaceable by NADPH. Divalent cations, such as Ca2+ and Ba2+, had no effect on the activity, while similar concentrations of Zn2+, Ni2+, and Cu2+ abolished the activity. This reductase activity could enable these bacteria both to reduce K2TeO3 and to increase their tolerance toward this salt.     

The use of diaminobenzidine for spectrophotometric and acrylamide gel detection of sulfite oxidase and its applicability to hydrogen peroxide-generating enzymes

DAB, in the presence of HRP, sulfite oxidase and FBS, polymerizes to a product with an absorption difference maximum at 352 nm. This reaction has been used as a sensitive and specific spectrophotometric assay for sulfite oxidase. Incubation of acrylamide gels containing sulfite oxidase with assay mixtures produces an insoluble product which precipitates where the enzyme is localized. This stain is at least as sensitive as the amido black protein stain and its specificity is such that no band is seen in the absence of substrate, and that only one band, migrating identically to purified enzyme is seen in rat liver homogenates. This polymerization reaction has been applied to other H₂O₂-generating enzymes and can be used to demonstrate the presence of these enzymes in the midst of other oxidases. DAB polymerization provides a sensitive spectrophotometric assay which can be used with either ultraviolet or visible optics. The application of this procedure to modified enzymes is discussed.     

Lysis of Yeast Cells Showing Low Susceptibility to Zymolyase

Lysis of commercial baker’s yeast cells was examined using Zymolyase. The lysis was stimulated by the addition of sodium sulfite or potassium chloride or both. The effect of potassium chloride was less than that of sodium sulfite, but the two compounds acted synergistically. The cells were effectively lysed by Zymolyase in the presence of 0.1 M sodium sulfite and 0.8 M potassium chloride. The extent of lysis was similar to that of brewery yeast cells obtained from a brewhouse. Cells pretreated with sodium sulfite did not show much of an increase in susceptibility to Zymolyase, but were effectively lysed by the enzyme in the presence of potassium chloride. Potassium chloride stimulated lysis only in the presence of Zymolyase. Yeast cells treated with cupric ions in the presence of sodium sulfite became highly susceptible to Zymolyase, suggesting irreversible destruction of the sodium sulfite-sensitive and potassium chloride-sensitive structure of the cell wall.

Cells of Saccharomyces cerevisiae prepared under various culture conditions were completely lysed by Zymolyase in the presence of sodium sulfite or potassium chloride or both.     

Optical method for the determination of the oxygen-transfer capacity of small bioreactors based on sulfite oxidation.

The growth of microorganisms may be limited by operating conditions which provide an inadequate supply of oxygen. To determine the oxygen-transfer capacities of small-scale bioreactors such as shaking flasks, test tubes, and microtiter plates, a noninvasive easy-to-use optical method based on sulfite oxidation has been developed. The model system of sodium sulfite was first optimized in shaking-flask experiments for this special application. The reaction conditions (pH, buffer, and catalyst concentration) were adjusted to obtain a constant oxygen transfer rate for the whole period of the sulfite oxidation reaction. The sharp decrease of the pH at the end of the oxidation, which is typical for this reaction, is visualized by adding a pH dye and used to measure the length of the reaction period. The oxygen-transfer capacity can then be calculated by the oxygen consumed during the complete stoichiometric transformation of sodium sulfite and the visually determined reaction time. The suitability of this optical measuring method for the determination of oxygen-transfer capacities in small-scale bioreactors was confirmed with an independent physical method applying an oxygen electrode. The correlation factor for the maximum oxygen-transfer capacity between the chemical model system and a culture of Pseudomonas putida CA-3 was determined in shaking flasks. The newly developed optical measuring method was finally used for the determination of oxygen-transfer capacities of different types of transparent small-scale bioreactors.     

Transient Kinetic Analysis of Hydrogen Sulfide Oxidation Catalyzed by Human Sulfide Quinone Oxidoreductase

The first step in the mitochondrial sulfide oxidation pathway is catalyzed by sulfide quinone oxidoreductase (SQR), which belongs to the family of flavoprotein disulfide oxidoreductases. During the catalytic cycle, the flavin cofactor is intermittently reduced by sulfide and oxidized by ubiquinone, linking H₂S oxidation to the electron transfer chain and to energy metabolism. Human SQR can use multiple thiophilic acceptors, including sulfide, sulfite, and glutathione, to form as products, hydrodisulfide, thiosulfate, and glutathione persulfide, respectively. In this study, we have used transient kinetics to examine the mechanism of the flavin reductive half-reaction and have determined the redox potential of the bound flavin to be −123 ± 7 mV. We observe formation of an unusually intense charge-transfer (CT) complex when the enzyme is exposed to sulfide and unexpectedly, when it is exposed to sulfite. In the canonical reaction, sulfide serves as the sulfur donor and sulfite serves as the acceptor, forming thiosulfate. We show that thiosulfate is also formed when sulfide is added to the sulfite-induced CT intermediate, representing a new mechanism for thiosulfate formation. The CT complex is formed at a kinetically competent rate by reaction with sulfide but not with sulfite. Our study indicates that sulfide addition to the active site disulfide is preferred under normal turnover conditions. However, under pathological conditions when sulfite concentrations are high, sulfite could compete with sulfide for addition to the active site disulfide, leading to attenuation of SQR activity and to an alternate route for thiosulfate formation.     

Activation of human erythrocyte 2,3-bisphosphoglycerate phosphatase at physiological concentrations of substrate

In human erythrocytes the reactions of the 2,3-bisphosphoglycerate shunt are catalyzed primarily by one protein, 2,3-bisphosphoglycerate synthase-phosphatase. At low concentrations of 2,3-bisphosphoglycerate the phosphatase is activated by several anions including inorganic phosphate and sulfite, and the phosphate activation is inhibited by low concentrations of 3-phosphoglycerate [Z. B. Rose and J. Liebowitz (1970) J. Biol. Chem. 245, 3232-3241]. Phosphate and sulfite also activate at high but physiological concentrations of 2,3-bisphosphoglycerate (5 mM), but the inhibition by 3-phosphoglycerate is much weaker. The basal activity (without added phosphate or sulfite) was also found to be higher and to be 3-phosphoglycerate sensitive; this is attributed to activation either by 2,3-bisphosphoglycerate itself or by a contaminant in it. These results allow previous observations of 2,3-bisphosphoglycerate hydrolysis in intact erythrocytes to be reconciled with the properties of the purified enzyme under near-physiological conditions.     

Stable isotope fractionation by Clostridium pasteurianum. 1. 34S/32S: inverse isotope effects during SO4-2- and SO3-2- reduction.

During growth on minimal salts--sucrose media supplemented with various concentrations (10-4-10-2 M) of sodium sulfate, Clostridium pasteurianum grew at a normal rate and only evolved sulfide in late stages of growth on 10-2 M SO4-2-. The evolved sulfide was slightly enriched in 34S as compared to the medium sulfur. On the other hand, sulfide was evolved during growth on all concentrations of sulfite tested. Large normal and inverse isotopic effects were observed in the evolved sulfide during SO3-2- reductions. In contrast, the intracellular sulfur showed much smaller fractionations. The complexity of the isotopic patterns suggests that a dissimilatory sulfite reductase system may be induced by high concentrations of sulfite.     

Effects of the Air Pollutant SO(2) on Leaves : Inhibition of Sulfite Oxidation in the Apoplast by Ascorbate and of Apoplastic Peroxidase by Sulfite

After SO₂ has entered leaves of spinach (Spinacia oleracea) through open stomata and been hydrated in the aqueous phase of cell walls, the sulfite formed can be oxidized to sulfate by an apoplastic peroxidase that is normally involved in phenol oxidation. The oxidation of sulfite is competitive with the oxidation of phenolics. During sulfite oxidation, the peroxidase is inhibited. In the absence of ascorbate, which is a normal constituent of the aqueous phase of the apoplast, peroxidative sulfite oxidation facilitates fast additional sulfite oxidation by a radical chain reaction. By scavenging radicals, ascorbate inhibits chain initiation and sulfite oxidation. Even after exposure of leaves to high concentrations of SO₂, which inhibited photosynthesis, the redox state of ascorbate remained almost unaltered in the apoplastic space of the leaves. It is concluded that the oxidative detoxification of SO₂ in the apoplast outside the cells is slow. Its rate depends on the rate of apoplastic hydrogen peroxide generation and on the steady-state apoplastic concentrations of phenolics and sulfite. The affinity of the peroxidase for phenolics is higher than that for sulfite.     

Significance of plant sulfite oxidase

Sulfite oxidizing activities are known since years in animals, microorganisms, and also plants. Among plants, the only enzyme well characterized on molecular and biochemical level is the molybdoenzyme sulfite oxidase (SO). It oxidizes sulfite using molecular oxygen as electron acceptor, leading to the production of sulfate and hydrogen peroxide. The latter reaction product seems to be the reason why plant SO is localized in peroxisomes, because peroxisomal catalase is able to decompose hydrogen peroxide. On the other hand, we have indications for an additional reaction taking place in peroxisomes: sulfite can be nonenzymatically oxidized by hydrogen peroxide. This will promote the detoxification of hydrogen peroxide especially in the case of high amounts of sulfite. Hence we assume that SO could possibly serve as "safety valve" for detoxifying excess amounts of sulfite and protecting the cell from sulfitolysis. Supportive evidence for this assumption comes from experiments where we fumigated transgenic poplar plants overexpressing ARABIDOPSIS SO with SO(2) gas. In this paper, we try to explain sulfite oxidation in its co-regulation with sulfate assimilation and summarize other sulfite oxidizing activities described in plants. Finally we discuss the importance of sulfite detoxification in plants.     

Kinetics of Mg2+-dependent CF1-ATPase in the presence of stimulators

A kinetic study of ATP hydrolysis by CF1-ATPase from chloroplasts in the presence of optimal concentrations of the stimulators, sodium sulfite and ethyl alcohol, has been carried out. At MgCl2/ATP ratios more than 1 the reaction kinetics obey the Michaelis--Menten equation. At ATP excess the kinetics are of the second order with respect to Mg2+. The data obtained are consistent with the hypothesis on the formation of an enzyme substrate Mg.CF1-MgATP complex containing beside Mg-ATP substrate Mg2+. The dependence of the maximal rate of the reaction on pH was studied. Two active groups with pK of 6.3 and 8.9 were revealed. The group responsible for Mg+2 binding to the enzyme has a pK of 8.3. The possible nature of the active groups of the enzyme is discussed.