Selection and structural analysis of de novo proteins from an α3β3 genetic library

The construction of novel functional proteins has been a key area of protein engineering. However, there are few reports of functional proteins constructed from artificial scaffolds. Here, we have constructed a genetic library encoding α3β3 de novo proteins to generate novel scaffolds in smaller size using a binary combination of simplified hydrophobic and hydrophilic amino acid sets. To screen for folded de novo proteins, we used a GFP‐based screening system and successfully obtained the proteins from the colonies emitting the very bright fluorescence as a similar intensity of GFP. Proteins isolated from the very bright colonies (vTAJ) and bright colonies (wTAJ) were analyzed by circular dichroism (CD), 8‐anilino‐1‐naphthalenesulfonate (ANS) binding assay, and analytical size‐exclusion chromatography (SEC). CD studies revealed that vTAJ and wTAJ proteins had both α‐helix and β‐sheet structures with thermal stabilities. Moreover, the selected proteins demonstrated a variety of association states existing as monomer, dimer, and oligomer formation. The SEC and ANS binding assays revealed that vTAJ proteins tend to be a characteristic of the folded protein, but not in a molten‐globule state. A vTAJ protein, vTAJ13, which has a packed globular structure and exists as a monomer, was further analyzed by nuclear magnetic resonance. NOE connectivities between backbone signals of vTAJ13 suggested that the protein contains three α‐helices and three β‐strands as intended by its design. Thus, it would appear that artificially generated α3β3 de novo proteins isolated from very bright colonies using the GFP fusion system exhibit excellent properties similar to folded proteins and would be available as artificial scaffolds to generate functional proteins with catalytic and ligand binding properties.     

Refined solution structure of the anti-mammal and anti-insect LqqIII scorpion toxin: Comparison with other scorpion toxins

The solution structure of the anti-mammal and anti-insect LqqIII toxin from the scorpion Leiurus quinquestriatus quinquestriatuswas refined and compared with other long-chain scorpion toxins. This structure, determined by ¹H-NMR and molecular modeling, involves an α-helix (18–29) linked to a three-stranded β-sheet (2–6, 33–39, and 43–51) by two disulfide bridges. The average RMSD between the 15 best structures and the mean structure is 0.71 Å for Cα atoms. Comparison between LqqIII, the potent anti-mammal AaHII, and the weakly active variant-3 toxins revealed that the LqqIII three-dimensional structure is closer to that of AaHII than to the variant-3 structure. Moreover, striking analogies were observed between the electrostatic and hydrophobic potentials of LqqIII and AaHII. Several residues are well conserved in long-chain scorpion toxin sequences and seem to be important in protein structure stability and function. Some of them are involved in the CSαβ (Cysteine Stabilized α-helix β-sheet) motif. A comparison between the sequences of the RII rat brain and the Drosophila extracellular loops forming scorpion toxin binding-sites of Na⁺ channels displays differences in the subsites interacting with anti-mammal or anti-insect toxins. This suggests that hydrophobic as well as electrostatic interactions are essential for the binding and specificity of long-chain scorpion toxins. Proteins 28:360–374, 1997 © 1997 Wiley-Liss, Inc.     

Alpha helix capping in synthetic model peptides by reciprocal side chain–main chain interactions: Evidence for an N terminal “capping box”

A significant fraction of the amino acids in proteins are alpha helical in conformation. Alpha helices in globular proteins are short, with an average length of about twelve residues, so that residues at the ends of helices make up an important fraction of all helical residues. In the middle of a helix, H-bonds connect the NH and CO groups of each residue to partners four residues along the chain. At the ends of a helix, the H-bond potential of the main chain remains unfulfilled, and helix capping interactions involving bonds from polar side chains to the NH or CO of the backbone have been proposed and detected. In a study of synthetic helical peptides, we have found that the sequence Ser-Glu-Asp-Glu stabilizes the alpha helix in a series of helical peptides with consensus sequences. Following the report by Harper and Rose, which identifies SerXaaXaaGlu as a member of a class of common motifs at the N termini of alpha helices in proteins that they refer to as “capping boxes,” we have reexamined the side chain–main chain interactions in a varient sequence using ¹H NMR, and find that the postulated reciprocal side chain-backbone bonding between the first Ser and last Glu side chains and their peptide NH partners can be resolved: Deletion of two residues N terminal to the Ser-Glu-Asp-Glu sequence in these peptides has no effect on the initiation of helical structure, as defined by two-dimensional (2D) NMR experiments on this variant. Thus the capping box sequence Ser-Glu-Asp-Glu inhibits N terminal fraying of the N terminus of alpha helix in these peptides, and shows the side chain–main chain interactions proposed by Harper and Rose. It thus acts as a helix initiating signal. Since normal a helix cannot propagate beyond the N terminus of this structure, the box acts as a termination signal in this direction as well. © 1994 John Wiley & Sons, Inc.     

α-galactosidase activity in ingested seeds and in the midgut of Dysdercus peruvianus (Hemiptera: Pyrrhocoridae)

The midgut of Dysdercus peruvianus is divided into three main sections (V₁-V₃) and is linked through V₄ to the hindgut. The distribution of α-galactosidase activity in the different gut segments of D. peruvianus females was studied. α-galactosidase hydrolyzes the trisaccharide raffinose, the major carbohydrate of cotton seeds, on which the insects live. In D. peruvianus midgut, α-galactosidase activity is mainly found in soluble fractions of V₁ contents. However, a comparison between specific activities using different α-galactosidase substrates in cotton seed extracts, V₁ tissue homogenate, and midgut contents suggested that the contribution of the enzymes from seeds may be very significant. Gel filtration on Sephacryl S-200 of samples from seed extracts, V₁ tissue, and V₁ contents revealed that in all samples raffinose hydrolysis is accomplished by α-galactosidases with similar M_r (30,000 ± 3,000) and does not involve the activity of a β-fructosidase. Thermal inactivation studies of extracts from the three sources suggested that there was only one molecular form of the insect α-galactosidase and that the activity found in V₁ contents includes enzymes derived from the seed kernel. In insects fed with cotton seeds, the α-galactosidase activity increased in parallel with diet ingestion. In starved insects fed with tablets of sucrose plus raffinose, an increase in α-galactosidase activity was also observed, confirming that the insect is able to synthesize part of the gut enzyme. The results indicated that raffinose digestion starts in V₁ utilizing α-galactosidases derived from the seed kernel and by an additional α-galactosidase synthesized by insect tissues. The action of α-galactosidases liberates galactose and sucrose, which are sequentially hydrolyzed by the major membrane-bound α-galactosidase releasing glucose and fructose in V₁ and V₂ lumina. Arch. Insect Biochem. Physiol. 34:443–460, 1997. © 1997 Wiley-Liss, Inc.     

Folding type-specific secondary structure propensities of amino acids,derived from α-helical, β-sheet, α/β, and α+β proteins of known structures

Folding type-specific secondary structure propensities of 20 naturally occurring amino acids have been derived from α-helical, β-sheet, α/β, and α+β proteins of known structures. These data show that each residue type of amino acids has intrinsic propensities in different regions of secondary structures for different folding types of proteins. Each of the folding types shows markedly different rank ordering, indicating folding type-specific effects on the secondary structure propensities of amino acids. Rigorous statistical tests have been made to validate the folding type-specific effects. It should be noted that α and β proteins have relatively small α-helices and β-strands forming propensities respectively compared with those of α+β and α/β proteins. This may suggest that, with more complex architectures than α and β proteins, α+β and α/β proteins require larger propensities to distinguish from interacting α-helices and β-strands. Our finding of folding type-specific secondary structure propensities suggests that sequence space accessible to each folding type may have differing features. Differing sequence space features might be constrained by topological requirement for each of the folding types. Almost all strong β-sheet forming residues are hydrophobic in character regardless of folding types, thus suggesting the hydrophobicities of side chains as a key determinant of β-sheet structures. In contrast, conformational entropy of side chains is a major determinant of the helical propensities of amino acids, although other interactions such as hydrophobicities and charged interactions cannot be neglected. These results will be helpful to protein design, class-based secondary structure prediction, and protein folding. © 1998 John Wiley & Sons, Inc. Biopoly 45: 35–49, 1998     

Thermodynamic model of secondary structure for α-helical peptides and proteins

A thermodynamic model describing formation of α-helices by peptides and proteins in the absence of specific tertiary interactions has been developed. The model combines free energy terms defining α-helix stability in aqueous solution and terms describing immersion of every helix or fragment of coil into a micelle or a nonpolar droplet created by the rest of protein to calculate averaged or lowest energy partitioning of the peptide chain into helical and coil fragments. The α-helix energy in water was calculated with parameters derived from peptide substitution and protein engineering data and using estimates of nonpolar contact areas between side chains. The energy of nonspecific hydrophobic interactions was estimated considering each α-helix or fragment of coil as freely floating in the spherical micelle or droplet, and using water/cyclohexane (for micelles) or adjustable (for proteins) side-chain transfer energies. The model was verified for 96 and 36 peptides studied by ¹H-nmr spectroscopy in aqueous solution and in the presence of micelles, respectively ([set I] and [set 2]) and for 30 mostly α-helical globular proteins ([set 3]). For peptides, the experimental helix locations were identified from the published medium-range nuclear Overhauser effects detected by ¹H-nmr spectroscopy. For sets 1, 2, and 3, respectively, 93, 100, and 97% of helices were identified with average errors in calculation of helix boundaries of 1.3, 2.0, and 4.1 residues per helix and an average percentage of correctly calculated helix—coil states of 93, 89, and 81%, respectively. Analysis of adjustable parameters of the model (the entropy and enthalpy of the helix—coil transition, the transfer energy of the helix backbone, and parameters of the bound coil), determined by minimization of the average helix boundary deviation for each set of peptides or proteins, demonstrates that, unlike micelles, the interior of the effective protein droplet has solubility characteristics different from that for cyclohexane, does not bind fragments of coil, and lacks interfacial area. © 1997 John Wiley & Sons, Inc. Biopoly 42: 239–269, 1997     

Insights into thermal resistance of proteins from the intrinsic stability of their α-helices

To investigate the role of α helices in protein thermostability, we compared energy characteristics of α helices from thermophilic and mesophilic proteins belonging to four protein families of known three-dimensional structure, for at least one member of each family. The changes in intrinsic free energy of α-helix formation were estimated using the statistical mechanical theory for describing helix/coil transitions in peptide helices [Munoz, V., Serrano, L. Nature Struc. Biol. 1:399–409, 1994; Munoz, V., Serrano, L. J. Mol. Biol. 245:275–296, 1995; Munoz, V., Serrano, L. J. Mol. Biol. 245:297–308, 1995]. Based on known sequences of mesophilic and thermophilic RecA proteins we found that (1) a high stability of α helices is necessary but is not a sufficient condition for thermostability of RecA proteins, (2) the total helix stability, rather than that of individual helices, is the factor determining protein thermostability, and (3) two facets of intrahelical interactions, the intrinsic helical propensities of amino acids and the side chain–side chain interactions, are the main contributors to protein thermostability. Similar analysis applied to families of L-lactate dehydrogenases, seryl-tRNA synthetases, and aspartate amino transferases led us to conclude that an enhanced total stability of α helices is a general feature of many thermophilic proteins. The magnitude of the observed decrease in intrinsic free energy on α-helix formation of several thermoresistant proteins was found to be sufficient to explain the experimentally determined increase of their thermostability. Free energies of intrahelical interactions of different RecA proteins calculated at three temperatures that are thought to be close to its normal environmental conditions were found to be approximately equal. This indicates that certain flexibility of RecA protein structure is an essential factor for protein function. All RecA proteins analyzed fell into three temperature-dependent classes of similar α-helix stability (ΔG_int = 45.0 ± 2.0 kcal/mol). These classes were consistent with the natural origin of the proteins. Based on the sequences of protein α helices with optimized arrangement of stabilizing interactions, a natural reserve of RecA protein thermoresistance was estimated to be sufficient for conformational stability of the protein at nearly 200°C. Proteins 29:309–320, 1997. © 1997 Wiley-Liss, Inc.     

De novo design,synthesis and solution conformational study of two didehydroundecapeptides: effect of nature and number of amino acids interspersed between Phe residues

De novo design of peptides and proteins has recently surfaced as an approach for investigating protein structure and function. This approach vitally tests our knowledge of protein folding and function, while also laying the groundwork for the fabrication of proteins with properties not precedented in nature. The success relies heavily on the ability to design relatively short peptides that can espouse stable secondary structures. To this end, substitution with α,β‐didehydroamino acids, especially α,β‐didehydrophenylalanine (Δ^zPhe), comes in use for spawning well‐defined structural motifs. Introduction of ΔPhe induces β‐bends in small and 3₁₀‐helices in longer peptide sequences. The present work aims to investigate the effect of nature and the number of amino acids interspersed between two ΔPhe residues in two model undecapeptides, Ac‐Gly‐Ala‐ΔPhe‐Ile‐Val‐ΔPhe‐Ile‐Val‐ΔPhe‐Ala‐Gly‐NH₂ (I) and Boc‐Val‐ΔPhe‐Phe‐Ala‐Phe‐ΔPhe‐Phe‐Leu‐Ala‐ΔPhe‐Gly‐OMe (II). Peptide I was synthesized using solid‐phase chemistry and characterized using circular dichroism spectroscopy. Peptide II was synthesized using solution‐phase chemistry and characterized using circular dichroism and nuclear magnetic resonance spectroscopy. Peptide I was designed to examine the effect of incorporating β‐strand‐favoring residues like valine and isoleucine as spacers between two ΔPhe residues on the final conformation of the resulting peptide. Circular dichroism studies on this peptide have shown the existence of a 3₁₀‐helical conformation. Peptide II possesses three amino acids as spacers between ΔPhe residues and has been reported to adopt a mixed 3₁₀/α‐helical conformation using circular dichroism and nuclear magnetic resonance spectroscopy studies. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Design,synthesis and conformational analysis of hGM-CSF[13-31]-Gly-Pro-Gly-[103-116]

On the basis of the X-ray structure and results from structure--activity relationship studies, the following GM–CSF analogue was designed and synthesized by solid-phase methodology: hGM–CSF[13-31]-Gly-Pro-Gly-[103–116]-NH₂. This analogue was constructed to comprise helices A and D of the native hGM–CSF, covalently linked in an antiparallel orientation by the tripeptide spacer Gly-Pro-Gly, which is known as a turn-inducing sequence. The conformational analysis of the analogue by CD spectroscopy revealed an essentially random structure in water, while α-helix formation was observed upon addition of TFE. In 40% TFE the helix content was ∼45%. By two-dimensional NMR experiments in 1:1 water/trifluoroethanol mixture two helical sequences were identified comprising the segments corresponding to helix A and helix D. In addition to medium-range NOESY connectivities, a long-range cross-peak was found involving the leucine residues at positions 13 and 35. Based on the experimentally derived data (54 NOEs), the structure was refined by restrained molecular dynamics simulations over 120 ps at various temperatures. A representative conformation derived from the computer simulation is mainly characterized by two helical segments connected by a loop region. The overall three-dimensional structure of the analogue is comparable to the X-ray structure of hGM–CSF in that helices A and D are oriented in an antiparallel fashion, forming a two α-helix bundle. Nevertheless, there are small differences in the topology of the helices between the solution structure of the designed analogue and the X-ray structure of hGM–CSF. The possible implications of these conformational features at the effects of biological activity are discussed. © 1997 European Peptide Society and John Wiley & Sons, Ltd. J. Pep. Sci.3: 323–335 No. of Figures: 10. No. of Tables: 5. No. of References: 46     

Crystallization,molecular replacement solution,and refinement of tetrameric β-amylase from sweet potato

Sweet potato β-amylase is a tetramer of identical subunits, which are arranged to exhibit 222 molecular symmetry. Its subunit consists of 498 amino acid residues (Mr 55,880). It has been crystallized at room temperature using polyethylene glycol 1500 as precipitant. The crystals, growing to dimensions of 0.4 mm × 0.4 mm × 1.0 mm within 2 weeks, belong to the tetragonal space group P4₂2₁2 with unit cell dimensions of a = b = 129.63 Å and c = 68.42 Å. The asymmetric unit contains 1 subunit of β-amylase, with a crystal volume per protein mass (V_M) of 2.57 ų/Da and a solvent content of 52% by volume. The three-dimensional structure of the tetrameric β-amylase from sweet potato has been determined by molecular replacement methods using the monomeric structure of soybean enzyme as the starting model. The refined subunit model contains 3,863 nonhydrogen protein atoms (488 amino acid residues) and 319 water oxygen atoms. The current R-value is 20.3% for data in the resolution range of 8–2.3 Å (with 2 σ cut-off) with good stereochemistry. The subunit structure of sweet potato β-amylase (crystallized in the absence of α-cyclodextrin) is very similar to that of soybean β-amylase (complexed with α-cyclodextrin). The root-mean-square (RMS) difference for 487 equivalent Cα atoms of the two β-amylases is 0.96 Å. Each subunit of sweet potato β-amylase is composed of a large (α/β)₈ core domain, a small one made up of three long loops [L3 (residues 91–150), LA (residues 183–258), and L5 (residues 300–327)], and a long C-terminal loop formed by residues 445–493. Conserved Glu 187, believed to play an important role in catalysis, is located at the cleft between the (α/β)₈ barrel core and a small domain made up of three long loops (L3, L4, and L5). Conserved Cys 96, important in the inactivation of enzyme activity by sulfhydryl reagents, is located at the entrance of the (α/β)₈ barrel. © 1995 Wiley-Liss, Inc.     

Contact prediction for beta and alpha‐beta proteins using integer linear optimization and its impact on the first principles 3D structure prediction method ASTRO‐FOLD

An integer linear optimization model is presented to predict residue contacts in β, α + β, and α/β proteins. The total energy of a protein is expressed as sum of a C^α? C^α distance dependent contact energy contribution and a hydrophobic contribution. The model selects contact that assign lowest energy to the protein structure as satisfying a set of constraints that are included to enforce certain physically observed topological information. A new method based on hydrophobicity is proposed to find the β‐sheet alignments. These β‐sheet alignments are used as constraints for contacts between residues of β‐sheets. This model was tested on three independent protein test sets and CASP8 test proteins consisting of β, α + β, α/β proteins and it was found to perform very well. The average accuracy of the predictions (separated by at least six residues) was ～61%. The average true positive and false positive distances were also calculated for each of the test sets and they are 7.58 Å and 15.88 Å, respectively. Residue contact prediction can be directly used to facilitate the protein tertiary structure prediction. This proposed residue contact prediction model is incorporated into the first principles protein tertiary structure prediction approach, ASTRO‐FOLD. The effectiveness of the contact prediction model was further demonstrated by the improvement in the quality of the protein structure ensemble generated using the predicted residue contacts for a test set of 10 proteins. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Chemical cross-linking between lysine groups in vimentin oligomers is dependent on local peptide conformations

Previous studies have shown that cytoplasmic intermediate filaments, other than the keratins, are each constructed from a single type of polypeptide chain. Studies involving chemical crosslinking between lysine groups have shown that assembly of the filaments begins with the formation of dimers in which the peptide chains are parallel and in exact register, and that these dimers further associate in antiparallel patterns having specific degrees of overlap. In the present study, molecular modeling of the conformations of vimentin molecules indicated that lysine side chains in identical positions in regions of α-helix in parallel chains might be unable to be linked because they are on opposite sides of the coiled coil hydrophobic core. Examination of published data on chemical crosslinking of lysines in vimentin confirmed that there were no instances of linkage within dimers between the nine pairs of identical lysines that lie more than one position within α-helical regions in parallel chains. Even among linkages that apparently were between dimers, only one of the 11 linkage products identified involved lysines that were both within an α-helical region. In 10 of the 11 identified linkages between dimers, one or both of the linked lysines were in regions of random coil conformation. These results of molecular modeling indicate that relative motion between polypeptide chains in oligomers of intermediate filament proteins is not sufficient to overcome an orientation of lysine groups that is unfavorable for their chemical linkage. This finding supports the interpretations of keratin cross-linking data indicating that parallel homodimers are the basis for keratin intermediate filament assembly. © 1996 Wiley-Liss, Inc.     

Characterization and expression of Cd8 molecules in mandarin fish Siniperca chuatsi

The full‐length complementary DNA (cDNA) sequences encoding cd8α and cd8β molecules were sequenced and characterized from mandarin fish Siniperca chuatsi. Conserved motifs and residues were found to be present in derived peptides of the Cd8 molecules. For example, WXR motif, DXGXYXC motif, and four cysteine residues were present in the extracellular region of the Cd8 protein. Threonine, serine and proline residues involved in multiple O‐linked glycosylation events were located in the membrane proximal hinge region. The common CPH motif in the cytoplasmic tail was detected similar to other teleost Cd8 molecules. Different from those in mammals, S. chuatsi Cd8 sequences have many extra cysteine residues (C149 in Cd8α sequence and C46, C51 and C158 in Cd8β sequence), which also exist in other teleost Cd8 molecules. Real‐time polymerase chain reaction (RT‐PCR) and Western blot analyses revealed that the thymus had the highest expression of cd8 messenger (m)RNA and protein. After stimulated with phytohaemagglutinin, polyriboinsine‐polyribocyaidylic acid and concanavalin A (ConA), the expression level of cd8 mRNA increased significantly in head‐kidney lymphocytes at 4 and 8 h, but decreased to normal level at 12 h. Similarly, stimulation with ConA in vivo also led to an increase in the cd8 mRNA level in the spleen. Immunohistochemistry analysis demonstrated that Cd8α‐positive cells can be detected in the thymus, spleen and intestine by using polyclonal anti‐Cd8α antibody.     

Dissecting α-helices: Position-specific analysis of α-helices in globular proteins

An analysis of the amino acid distributions at 15 positions, viz., N“, N′, Ncap, N1, N2, N3, N4, Mid, C4, C3, C2, C1, Ccap, C′, and C” in 1,131 α-helices reveals that each position has its own unique characteristics. In general, natural helix sequences optimize by identifying the residues to be avoided at a given position and minimizing the occurrence of these avoided residues rather than by maximizing the preferred residues at various positions. Ncap is most selective in its choice of residues, with six amino acids (S, D, T, N, G, and P) being preferred at this position and another 11 (V, I, F, A, K, L, Y, R, E, M, and Q) being strongly avoided. Ser, Asp, and Thr are all more preferred at Ncap position than Asn, whose role at helix N-terminus has been highlighted by earlier analyses. Furthermore, Asn is also found to be almost equally preferred at helix C-terminus and a novel structural motif is identified, involving a hydrogen bond formed by N^δ2 of Asn at Ccap or C1 position, with the backbone carbonyl oxygen four residues inside the helix. His also forms a similar motif at the C-terminus. Pro is the most avoided residue in the main body (N4 to C4 positions) and at C-ter-minus, including Ccap of an α-helix. In 1,131 α-helices, no helix contains Pro at C3 or C2 positions. However, Pro is highly favoured at N1 and C′. The doublet X-Pro, with Pro at C′ position and extended backbone conformation for the X residue at Ccap, appears to be a common structural motif for termination of α-helices, in addition to the Schellman motif. Main body of the helix shows a high preference for aliphatic residues Ala, Leu, Val, and Ile, while these are avoided at helix termini. A propensity scale for amino acids to occur in the middle of helices has been obtained. Comparison of this scale with several previously reported scales shows that this scale correlates best with the experimentally determined values. Proteins 31:460–476, 1998. © 1998 Wiley-Liss, Inc.     

Hydrophobic Effects on Antibacterial and Channel-forming Properties of Cecropin A–Melittin Hybrids

The design of cecropin–melittin hybrid analogues is of interest due to the similarities in the structure of the antimicrobial peptides cecropin and melittin but differences in their lytic properties. We suspected that a hydrophobic residue in position 2 of milittin (Ile⁸ in the hybrid) plays an important role in the activity of the 15-residue hybrid, KWKLFKKIGAVLKVL-NH₂, [CA(1–7)M(2–9)NH₂] and have now examined its role in the analogue toward five test bacteria. Deletion of Ile⁸ reduced activity, and it was not restored by lengthening to 15 residues by addition of another threonine at the C-terminus. Replacement of Ile⁸ by a hydrophobic leucine maintained good activity and Ala⁸ was equally active for four organisms, although less active against Staphylococcus aureus. Replacement by the hydrophilic Ser⁸ strongly reduced potency against all five organisms. Deletion of Leu¹⁵ decreased activity, but addition of Thr¹⁶ maintained good activity. The presence of hydrophobic residues appears to have a significant effect on the process of antibacterial activity. These peptide analogues showed voltage-dependent conductance changes and are capable of forming ion-pores in planar lipid bilayers. The antibacterial action of the peptides is thought to be first an ionic interaction with the anionic phosphate groups of the membrane followed by interaction with the hydrocarbon core of the membrane and subsequent reorientation into amphipathic α-helical peptides that form pores (ion-channels), which span the membrane. The analogue also showed an increase in α-helicity with an increase in hexafluoro 2-propanol concentration.     

Studies of conformational isomerism in α-melanocyte stimulating hormone by design of cyclic analogues

Results of energy calculations for α-MSH (α-melanocyte stimulating hormone, Ac-Ser¹-Tyr²-Ser³-Met⁴-Glu⁵-His⁶-Phe⁷-Arg⁸-Trp⁹-Gly¹⁰-Lys¹¹-Pro¹²-Val¹³-NH₂) and [D -Phe⁷]α-MSH were used for design of cyclic peptides with the general aim to stabilize different conformational isomers of the parent compound. The minimal structural modifications of the conformationally flexible Gly¹⁰ residue, as substitutions for L -Ala, D -Ala, or Aib (replacing of hydrogen atoms by methyl groups), were applied to obtain octa- and heptapeptide analogues of α-MSH(4–11) and α-MSH(5–11), which were cyclized by lactam bridges between the side chains in positions 5 and 11. Some of these analogues, namely those with substitutions of the Gly¹⁰ residue with L -Ala or Aib, showed biological activity potencies on frog skin comparable to the potency of the parent tridecapeptide hormone. Additional energy calculations for designed cyclic analogues were used for further refinement of the model for the biologically active conformations of the His-Phe-Arg-Trp “message” sequence within the sequences of α-MSH and [D -Phe⁷]α-MSH. In such conformations the aromatic moieties of the side chains of the His⁶, L/D -Phe⁷, and Trp⁹ residues form a continuous hydrophobic “surface,” presumably interacting with a complementary receptor site. This feature is characteristic for low-energy conformers of active cyclic analogues, but it is absent in the case of inactive analogues. This particular spatial arrangement of functional groups involved in the message sequence is very close for α-MSH and [D -Phe⁷]α-MSH, as well as for biologically active cyclic analogues despite differences of dihedral angle values for corresponding low-energy conformations. © 1998 John Wiley & Sons, Inc. Biopoly 46: 155–167, 1998     

Crystal structure of the bovine α-chymotrypsin:kunitz inhibitor complex. An example of multiple protein:protein recognition sites

The crystal structure of bovine α-chymotrypsin (α-CHT) in complex with the bovine basic pancreatic trypsin inhibitor (BPTI) has been solved and refined at 2.8 Å resolution (R-factor=0.18). The proteinase:inhibitor complex forms a compact dimer (two α-CHT and two BPTI molecules), which may be stabilized by surface-bound sulphate ions, in the crystalline state. Each BPTI molecule, at opposite ends, is contacting both proteinase molecules in the dimer, through the reactive site loop and through residues next to the inhibitor's C-terminal region. Specific recognition between α-CHT and BPTI occurs at the (re)active site interface according to structural rules inferred from the analysis of homologous serine proteinase:inhibitor complexes. Lys15, the P₁ residue of BPTI, however, does not occupy the α-CHT S₁ specificity pocket, being hydrogen bonded to backbone atoms of the enzyme surface residues Gly216 and Ser217. © 1997 John Wiley & Sons, Ltd.     

Synthesis and characterization of β‐peptide helices as transmembrane domains in lipid model membranes

Aggregation, orientation and dynamics of transmembrane helices are of relevance for protein function and transmembrane signaling. To explore the interactions of transmembrane helices and the interdependence of peptide structure and lipid composition of the membranes, β‐peptides were explored as model transmembrane domains. Various hydrophobic β‐peptide sequences were synthesized by solid phase peptide synthesis. Conformational analyses of β‐peptide helices were performed in organic solvents (methanol and 2,2,2‐trifluoroethanol) and in large unilamellar liposomes (dimyristoylphosphatidylcholine, dipalmitoylphosphatidylcholine and dioleoylphosphatidylcholine) indicating 12‐ and 14‐helix conformations, depending on β³‐amino acid sequences. The intrinsic tryptophan fluorescence of β³‐homotryptophan units inserted in the center or near the end of the sequence was used to verify the membrane insertion of the β‐peptides. A characteristic blue shift with peripheral β³‐homotryptophan compared with β‐peptides with central tryptophan served as indication for a transmembrane orientation of the β‐peptides within the lipid bilayer. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Pressure perturbation calorimetry of apolipoproteins in solution and in model lipoproteins

High‐density lipoproteins (HDLs) are complexes of lipids and proteins (termed apolipoproteins) that remove cell cholesterol and protect from atherosclerosis. Apolipoproteins contain amphipathic α‐helices that have high content (≥1/3) and distinct distribution of charged and apolar residues, adopt molten globule‐like conformations in solution, and bind to lipid surfaces. We report the first pressure perturbation calorimetry (PPC) study of apolipoproteins. In solution, the main HDL protein, apoA‐I, shows relatively large volume contraction, ΔV_unf = ?0.33%, and an apparent reduction in thermal expansivity upon unfolding, Δα_unf ≤ 0, which has not been observed in other proteins. We propose that these values are dominated by increased charged residue hydration upon α‐helical unfolding, which may result from disruption of multiple salt bridges. At 5°C, apoA‐I shows large thermal expansion coefficient, α(5°) = 15·10^?4 K^?1, that rapidly declines upon heating from 5 to 40°C, α(40°) ? α(5°) = ?4·10^?4 K^?1; apolipoprotein C‐I shows similar values of α(5°) and α(40°). These values are larger than in globular proteins. They indicate dominant effect of charged residue hydration, which may modulate functional apolipoprotein interactions with a broad range of their protein and lipid ligands. The first PPC analysis of a protein–lipid complex is reported, which focuses on the chain melting transition in model HDL containing apoA‐I or apoC‐I, dimyristoyl phosphatidylcholine, and 0–20% cholesterol. The results may provide new insights into volumetric properties of HDL that modulate metabolic lipoprotein remodeling during cholesterol transport. Proteins 2010. © 2009 Wiley‐Liss, Inc.