Natural cellulose fibers from switchgrass with tensile properties similar to cotton and linen

We report the production and characteristics of natural cellulose fibers obtained from the leaves and stems of switchgrass. In this paper, the composition, structure and properties of fibers obtained from the leaves and stem of switchgrass have been studied in comparison to the common natural cellulose fibers, such as cotton, linen and kenaf. The leaves and stems of switchgrass have tensile properties intriguingly similar to that of linen and cotton, respectively. Fibers were obtained from the leaves and stems of switchgrass using a simple alkaline extraction and the structure and properties of the fibers were studied. Fibers obtained from switchgrass leaves have crystallinity of 51%, breaking tenacity of 5.5 g per denier (715 MPa) and breaking elongation of 2.2% whereas the corresponding values for fibers obtained from switchgrass stems are 46%, 2.7 g per denier and 6.8%, respectively. Switchgrass is a relatively easy to grow and high yield biomass crop that can be source to partially substitute the natural and synthetic fibers currently in use. We hope that this research will stimulate interests in using switchgrass as a novel fiber crop in addition to being promoted as a potential source for biofuels.     

Properties and potential applications of natural cellulose fibers from the bark of cotton stalks

Natural cellulose fibers have been obtained from the bark of cotton stalks and the fibers have been used to develop composites. Cotton stalks are rich in cellulose and account for up to 3 times the quantity of cotton fiber produced per acre. Currently, cotton stalks have limited use and are mostly burned on the ground. Natural cellulose fibers obtained from cotton stalks are composed of approximately 79% cellulose and 13.7% lignin. The fibers have breaking tenacity of 2.9 g per denier and breaking elongation of 3% and modulus of 144 g per denier, between that of cotton and linen. Polypropylene composites reinforced with cotton stalk fibers have flexural, tensile and impact resistance properties similar to jute fiber reinforced polypropylene composites. Utilizing cotton stalks as a source for natural cellulose fibers provides an opportunity to increase the income from cotton crops and make cotton crops more competitive to the biofuel crops.     

Carbohydrate components and crystalline structure of organosolv hemp (Cannabis sativa L.) bast fibers pulp

Changes in carbohydrate components and crystalline structure of hemp bast fibers during organosolv pulping were investigated by X-ray diffractometry, FT-IR spectroscopy and high performance liquid chromatography (HPLC). The reasons for defibrillation and beating problems with organosolv hemp bast fiber pulp were investigated with reference to these properties of pulp samples. Hemp bast fibers and organosolv pulp samples had low hemicellulose contents and high cellulose contents. It was found that the disorder parameter of cellulose in hemp bast fibers was very low, when crystalline cellulose ratio was high and the crystalline structure of cellulose in hemp bast fibers was very stable. These properties affected defibrillation and beating of organosolv hemp bast fibers pulp negatively.     

Properties of natural cellulose fibers from hop stems

This paper reports the development of natural cellulose fibers from hop stems with properties similar to that of hemp. Hop stems are currently considered as byproducts and have limited applications. Since hop belongs to the genus cannabis that also includes hemp, it should be possible to obtain natural cellulose fibers from the stems of hop plants with properties similar to that of hemp. A simple alkaline extraction was used to obtain fibers from the bark of hop stems. Fibers obtained have high cellulose content, low% crystallinity but show good orientation of the cellulose crystals to the fiber axis. The strength and modulus of the fibers are lower but elongation is higher than that of hemp. Based on the properties of the fibers, we expect that the hop stem fibers will be suitable for use in textiles and composites similar to the common cellulose fibers currently in use.     

Variety Trial and Pyrolysis Potential of Kenaf Grown in Midwest United States

Kenaf (Hibiscus cannabinus L.) has potential as an annual herbaceous biomass feedstock. It is not typically grown in the American Midwest; however, kenaf may be attractive as an alternative crop for Iowa and the Corn Belt. In this study, seven kenaf varieties were grown in Iowa and evaluated for their productivity. More specifically, our research questions were the following: (1) how do kenaf varieties perform in Iowa for yield? (2) How does fiber morphology and quality differ among varieties and among core and bast fiber? And (3) What potential does kenaf (bast and core) have for producing fuel using fast pyrolysis? Tainung 2, one of the varieties, reached the best yield in Central Iowa over multiple years. Bast kenaf contained 8 % more cellulose and 23 % less hemicellulose than the core but it varied among varieties. Also, regardless of variety, core was composed of 40 % more lignin than bast. Core was found to have higher potential for fast pyrolysis than the bast but its potential was variety-dependent. Overall, kenaf could be grown to diversify Iowa agriculture and provide alternative feedstock to the biofuel industry.     

Natural cellulose fibers from soybean straw

This paper reports the development of natural cellulose technical fibers from soybean straw with properties similar to the natural cellulose fibers in current use. About 220 million tons of soybean straw available in the world every year could complement the byproducts of other major food crops as inexpensive, abundant and annually renewable sources for natural cellulose fibers. Using the agricultural byproducts as sources for fibers could help to address the concerns on the future price and availability of both the natural and synthetic fibers in current use and also help to add value to the food crops. A simple alkaline extraction was used to obtain technical fibers from soybean straw and the composition, structure and properties of the fibers was studied. Technical fibers obtained from soybean straw have high cellulose content (85%) but low% crystallinity (47%). The technical fibers have breaking tenacity (2.7 g/den) and breaking elongation (3.9%) higher than those of fibers obtained from wheat straw and sorghum stalk and leaves but lower than that of cotton. Overall, the structure and properties of the technical fibers obtained from soybean straw indicates that the fibers could be suitable for use in textile, composite and other industrial applications.     

Chemical characterization of pitch deposits produced in the manufacturing of high-quality paper pulps from hemp fibers

The composition of pitch deposits occurring in pulp sheets and mill circuits during soda/anthraquinone pulping and elemental chlorine-free pulp bleaching of bast fibers of industrial hemp (Cannabis sativa) was studied. Pitch deposits were extracted with acetone, and the extracts analyzed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). Acetone extracts (15-25% of pitch deposits) were constituted by the defoamers used at the mill and by lipophilic extractives from hemp fibers. Acetone-insoluble residues (75-85% of pitch deposits) were analyzed by pyrolysis-GC/MS in the presence and absence of tetramethylammonium hydroxide. These residues were constituted by salts of fatty acids (arising from hemp fibers) with calcium, magnesium, aluminum and other cations that were identified in the deposits. It was concluded that inappropriate use of defoamer together with the presence of multivalent ions seemed to be among the causes of hemp extractives deposition in the pitch problems reported here.     

麻类作物组织培养及遗传转化研究进展

概述了国内外红麻等麻类作物快速繁殖、花药培养、原生质体培养、体细胞胚发生、器官发生等几个方面的组织培养以及遗传转化的研究进展,并对存在的问题进行了讨论,提出了进一步研究的一些见解,以期为促进麻类组织培养及遗传转化研究提供科学依据。     

Volatile allelopathy in velvet bean (Mucuna pruriens [correction of pruiens] L.) and gravity.

Allelopathy caused by volatile compounds was studied with velvet bean (Mucuna pruriens [correction of prueiens] L.). Preparatory experiment was conducted to identify the relationship between action of volatiles and gravity. The experimental protocol was defined and tested to study on volatile allelopathy of velvet bean. Root growth of lettuce (Lactuca sativa L.) seedlings was inhibited by volatile gas from velvet bean seedlings planted in Agripot. In this study, it was shown that ten-day velvet bean seedling could exhibit the volatile allelopathic ability. Growth chambers for volatile experiment were designed. Velvet bean seed can germinate in a 3-ml small vial.     

The indestructible insect: Velvet ants from across the United States avoid predation by representatives from all major tetrapod clades

Velvet ants are a group of parasitic wasps that are well known for a suite of defensive adaptations including bright coloration and a formidable sting. While these adaptations are presumed to function in antipredator defense, observations between potential predators and this group are lacking. We conducted a series of experiments to determine the risk of velvet ants to a host of potential predators including amphibians, reptiles, birds, and small mammals. Velvet ants from across the United States were tested with predator's representative of the velvet ants native range. All interactions between lizards, free‐ranging birds, and a mole resulted in the velvet ants survival, and ultimate avoidance by the predator. Two shrews did injure a velvet ant, but this occurred only after multiple failed attacks. The only predator to successfully consume a velvet ant was a single American toad (Anaxyrus americanus). These results indicate that the suite of defenses possessed by velvet ants, including aposematic coloration, stridulations, a chemical alarm signal, a hard exoskeleton, and powerful sting are effective defenses against potential predators. Female velvet ants appear to be nearly impervious to predation by many species whose diet is heavily derived of invertebrate prey.     

麻类织物对须癣毛癣菌生长抑制作用的研究

目的通过分析汉麻、亚麻和苎麻对须癣毛癣菌生长的影响,探讨麻类织物对浅部真菌的抑制作用。方法实验采用振荡法。将3种麻类织物分别与须癣毛癣菌混合培养,对照组为棉布组,3d后分别取培养液稀释5倍后涂布培养皿,计算各自的菌落数和抑菌率并进行统计分析。结果麻类织物组菌落数明显少于对照组棉布组(P<0.01),3种麻类织物对须癣毛癣菌的抑菌率均高于60%,但3种麻类织物的抑菌率之间无明显差异(P<0.01)。结论3种麻类织物均可显著抑制须癣毛癣菌的生长,麻类织物有可能用来预防由须癣毛癣菌引起的足癣、股癣等浅部真菌病。     

Dependence of chemical and crystalline structure of alkali sulfite pulp on cooking temperature and time

This study investigates the change in chemical and crystalline structure of pulp samples during alkali sulfite process at different cooking temperatures and time, TAPPI and SCAN standard test methods and X-ray diffraction and FT-IR spectroscopy were used. It was shown that the crystalline structure of cellulose in hemp (Cannabis sativa L.) bast fibers was very strong and stable. Crystallinity of alkali sulfite pulp samples obtained from processing at 140 up to 180 °C increased, but then decreased at 200 °C. The crystallite size of cellulose in alkali sulfite pulp samples increased with cooking temperature. The crystalline allomorph of cellulose in alkali sulfite pulp samples obtained at 200 °C changed from monoclinic structure to triclinic structure. Crystalline structure of cellulose in alkali sulfite pulp samples was little affected by changing cooking time. It was concluded that cooking temperature during alkaline sulfite pulping process had more effect on carbohydrate components and crystalline structure of pulp samples than cooking time.     

The potential of hemp (Cannabis sativa L.) for sustainable fibre production: a crop physiological appraisal

Hemp (Cannabis sativa L.) fibre can be used as a raw material for paper and textile production. A comprehensive research programme in the Netherlands has concluded that fibre hemp is a potentially profitable crop, having the right profile to fit into sustainable farming systems. This paper presents an appraisal of the crop physiological characteristics and the agronomic potential of hemp. Parameter values of basic crop physiological characteristics such as light interception potential, radiation use efficiency and dry matter partitioning coefficients are given. The effect of crop management decisions such as cultivar choice, sowing date, plant density, and harvest date on the value of these parameters is discussed. A simple crop growth model was used to assess the yield potential of hemp for the climate of the Netherlands. Calculations made for a non-stressed late-flowering hemp crop sown on 15 April and harvested on 15 September give a stem dry matter yield of 17.1 t ha^-1. The effects of advancing or delaying sowing or harvest date on stem yield were calculated. Crop physiological characteristics of hemp are compared to those of kenaf (Hibiscus cannabinus L.). Radiation use efficiency and dry matter partitioning coefficients of the two crops are similar. Base temperatures for development and growth are lower in hemp than in kenaf. In a temperate climate with cool springs, canopy establishment will be more rapid in hemp than in kenaf. Hemp seems an excellent candidate to fill the niche for an annual fibre crop in a temperate climate.     

Gene expression in tension wood and bast fibres

Tension wood is produced in the xylem of some angiosperm trees, such as poplar (Populus spp.), whereas bast fibers are phloem-derived cells best known from annual crops, such as flax (Linum usitatissimum L.). Despite their different origins, secondary walls of both tension wood and bast fibers share distinctive properties, including an abundance of axially oriented, crystalline cellulose produced in a distinctive gelatinous-type layer. Because of these unique properties, tension wood and phloem fibers have separately been the subject of at least nine previously published gene or protein profiling studies. Here we review these experiments with a focus on those genes, whose expression distinguishes both tension wood and bast fibers from the more predominant types of xylem found elsewhere in the stem. Notable among these is an evolutionarily distinctive group of fasciclin-like arabinogalactan proteins (FLA) and a putative rhamnogalacturonan lyase.     

Lignification in the flax stem: evidence for an unusual lignin in bast fibers

In the context of our research on cell wall formation and maturation in flax (Linum usitatissimum L) bast fibers, we (1) confirmed the presence of lignin in bast fibers and (2) quantified and characterized the chemical nature of this lignin at two developmental stages. Histochemical methods (Weisner and Maüle reagents and KMnO₄-staining) indicating the presence of lignin in bast fibers at the light and electron microscope levels were confirmed by chemical analyses (acetyl bromide). In general, the lignin content in flax bast fibers varied between 1.5% and 4.2% of the dry cell wall residues (CWRs) as compared to values varying between 23.7% and 31.4% in flax xylem tissues. Immunological and chemical analyses (thioacidolysis and nitrobenzene oxidation) indicated that both flax xylem- and bast fiber-lignins were rich in guaiacyl (G) units with S/G values inferior to 0.5. In bast fibers, the highly sensitive immunological probes allowed the detection of condensed guaiacyl-type (G) lignins in the middle lamella, cell wall junctions, and in the S1 layer of the secondary wall. In addition, lower quantities of mixed guaiacyl–syringyl (GS) lignins could be detected throughout the secondary cell wall. Chemical analyses suggested that flax bast-fiber lignin is more condensed than the corresponding xylem lignin. In addition, H units represented up to 25% of the monomers released from bast-fiber lignin as opposed to a value of 1% for the corresponding xylem tissue. Such an observation indicates that the structure of flax bast-fiber lignin is significantly different from that of the more typical woody plant lignin, thereby suggesting that flax bast fibers represent an interesting system for studying an unusual lignification process.     

Utilization of by-products from the tequila industry. Part 2: Potential value of Agave tequilana Weber azul leaves

The leaves of the agave plant are left in the field after harvesting the heads for tequila production. Different types of agave leaves were isolated, classified, and their content in the total plant determined. The usable fractions were collected and their properties determined. Of the total wet weight of the agave plant, 54% corresponds to the agave head, 32% corresponds to materials which could be usable for sugar and fiber production which leaves 14% of the wet plant without apparent utility. The fractions with higher total reducing sugars (TRS) content were the fresh fraction of partially dry leaves stuck to the head and the leaf bases with a TRS content of 16.1% and 13.1%, respectively. The highest TRS concentration (16-28%) is in the agave head which is used for tequila production. The leaves are 90-120 cm long and 8-12 cm wide and contain fiber bundles that are 23-52 cm long and 0.6-13 mm wide. The ultimate fiber length is approximately 1.6 mm with an average width of 25 microns. There are several types of leaf fibers that can be utilized depending on what part of the plant they come from and what product is desired. Agave leaf fibers were pulped using a soda pulping process and the pulp was hand formed into test sheets. Test sheets made from pulped agave leaf fibers had a breaking length comparable to paper made from both pine and eucalyptus fibers, but the tear index and burst index were lower than the other two papers.     

Comparative sequence and structure of viroid-like RNAs of two plant viruses.

A newly discovered group of spherical plant viruses contains a bipartite genome consisting of a single-strand linear RNA molecule (RNA 1, Mr 1.5 x 10(6) ), and a single-strand, covalently closed circular viroid-like RNA molecule (RNA 2, Mr approximately 125,000). The nucleotide sequences of the RNA 2 of two of these, velvet tobacco mottle virus and solanum nodiflorum mottle virus, have been determined. RNA 2 of solanum nodiflorum mottle virus consists of 377 residues whereas that of velvet tobacco mottle virus consists of two approximately equimolar species, one of 366 residues and the other, with a single nucleotide deletion, of 365 residues. There is 92-95% sequence homology between the RNA 2 species of the two viruses. The predicted secondary structures possess extensive intramolecular base pairing to give rod-like structures similar to those of viroids. The structural similarities between the RNAs 2 of velvet tobacco mottle virus and solanum nodiflorum mottle virus and viroids may reflect functional similarities.     

Effect of various factors on ethanol yields from lignocellulosic biomass by Thermoanaerobacterium AK₁₇

The ethanol production capacity from sugars and lignocellulosic biomass hydrolysates (HL) by Thermoanaerobacterium strain AK(17) was studied in batch cultures. The strain converts various carbohydrates to, acetate, ethanol, hydrogen, and carbon dioxide. Ethanol yields on glucose and xylose were 1.5 and 1.1 mol/mol sugars, respectively. Increased initial glucose concentration inhibited glucose degradation and end product formation leveled off at 30 mM concentrations. Ethanol production from 5 g L(-1) of complex biomass HL (grass, hemp, wheat straw, newspaper, and cellulose) (Whatman paper) pretreated with acid (0.50% H(2) SO(4)), base (0.50% NaOH), and without acid/base (control) and the enzymes Celluclast and Novozyme 188 (0.1 mL g(-1) dw; 70 and 25 U g(-1) of Celluclast and Novozyme 188, respectively) was investigated. Highest ethanol yields (43.0 mM) were obtained on cellulose but lowest on hemp leafs (3.6 mM). Chemical pretreatment increased ethanol yields substantially from lignocellulosic biomass but not from cellulose. The influence of various factors (HL, enzyme, and acid/alkaline concentrations) on end-product formation from 5 g L(-1) of grass and cellulose was further studied to optimize ethanol production. Highest ethanol yields (5.5 and 8.6 mM ethanol g(-1) grass and cellulose, respectively) were obtained at very low HL concentrations (2.5 g L(-1)); with 0.25% acid/alkali (v/v) and 0.1 mL g(-1) enzyme concentrations. Inhibitory effects of furfural and hydroxymethylfurfural during glucose fermentation, revealed a total inhibition in end product formation from glucose at 4 and 6 g L(-1), respectively.     

Enzyme immobilization on ultrafine cellulose fibers via poly(acrylic acid) electrolyte grafts

Ultrafine cellulose fiber (diameter 200-400 nm) surfaces were grafted with polyacrylic acid (PAA) via either ceric ion initiated polymerization or methacrylation of cellulose with methacrylate chloride (MACl) and subsequent free-radical polymerization of acrylic acid. PAA grafts by ceric ion initiated polymerization increased with increasing reaction time (2-24 h), monomer (0.3-2.4 M), and initiator (1-10 mM) concentrations, and spanned a broad range from 5.5-850%. PAA grafts on the methacrylated cellulose fibers also increased with increasing molar ratios of MACl to cellulosic hydroxyl groups (MACl/OH, 2-6.4) and monomer acrylic acid (AA) to initiator potassium persulfate (KPS) ratios ([AA]/[KPS], 1.5-6), and were in a much narrower range between 12.8% and 29.4%. The adsorption of lipase (at 1 mg/ml lipase and pH 7) and the activity of adsorbed lipase (pH 8.5, 30 degrees C), in both cases decreased with increasing PAA grafts. The highest adsorption and activity of the lipase on the ceric ion initiated grafted fibers were 1.28 g/g PAA and 4.3 U/mg lipase, respectively, at the lowest grafting level of 5.5% PAA, whereas they were 0.33 g/g PAA and 7.1 U/mg lipase, respectively, at 12.8% PAA grafts on the methacrylated and grafted fibers. The properties of the grafted fibers and the absorption behavior and activity of lipase suggest that the PAA grafts are gel-like by ceric-initiated reaction and brush-like by methacrylation and polymerization. The adsorbed lipase on the ceric ion-initiated grafted surface possessed greatly improved organic solvent stability over the crude lipase. The adsorbed lipases exhibited 0.5 and 0.3 of the initial activity in the second and third assay cycles, respectively.