Rolling circle replication of single-stranded DNA plasmid pC194.

A group of small Staphylococcus aureus/Bacillus subtilis plasmids was recently found to replicate via a circular single-stranded DNA intermediate (te Riele et al., 1986a). We show here that a 55 bp region of one such plasmid, pC194, has origin activity when complemented in trans by the plasmid replication protein. This region contains two palindromes, 5 and 14 bp long, and a site nicked by the replication protein. DNA synthesis presumably initiated at the nick in the replication origin can be terminated at an 18 bp sequence homologous to the site of initiation, deriving from another plasmid, pUB110, or synthesized in vitro. This result suggests that, similar to the Escherichia coli single-stranded DNA phages, pC194 replicates as a rolling circle. Interestingly, there is homology between replication origins and replication proteins of pC194 and the phage phi mX174.     

Replication origin of a single-stranded DNA plasmid pC194.

The replication of the single-stranded (ss) DNA plasmid pC194 by the rolling circle mechanism was investigated using chimeric plasmids that possess two pC194 replication origins. One of the origins was intact, whereas the other was either intact or mutated. The origins were activated by inducing synthesis of the pC194 replication protein, under the control of lambda phage pL promoter. Initiation of pC194 replication at one origin and termination at the other generated circular ssDNA molecules smaller than the parental chimeric plasmid. From the nature and the amount of ssDNA circles, the activity of an origin could be assessed. Our results show that (i) the signal for initiation of pC194 replication is more stringent than that for termination; (ii) the sequence and structure of the origin are important for its activity and (iii) successful termination of one replication cycle is not followed by reinitiation of another. This last observation differentiates a ssDNA plasmid (pC194) from a ssDNA phage (phi X174).     

Specificity of RepC protein in plasmid pT181 DNA replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 DNA replication specifically requires the plasmid-encoded initiator protein, RepC. The initiator protein binds specifically to a 32-base pair sequence within the pT181 origin of replication. RepC protein also has a nicking-closing activity that is specific for the pT181 origin. Replication of pT181 initiates by covalent extension of the nick and proceeds by a rolling circle mechanism. Two other small, multicopy plasmids pC221 and pS194 belong to the pT181 family and have common structural organization and replication properties. The replication proteins and replication origins of these plasmids have extensive sequence homologies, although they belong to different incompatibility groups. In spite of this homology, the replication proteins and replication origins of these three plasmids do not show any cross-reactivity in vivo. We have carried out a series of in vitro experiments to determine the specificity of pT181-encoded initiator protein, RepC. DNA binding experiments showed that although the binding of RepC to the pT181 origin was very efficient, little or no binding was seen with pC221 and pS194 origins. The nicking-closing activity of RepC was found to be equally efficient with the pC221 and pS194 plasmids. The plasmids pC221 and pS194 replicated efficiently in a RepC-dependent in vitro system. However, replication of these plasmids was greatly reduced in the presence of a competing pT181 origin. The results presented here suggest that nicking-closing by RepC at the origin is not sufficient for maximal replication and that tight binding of RepC to the origin plays an important role in the initiation of DNA replication.     

Molecular structure of the replication origin of a Bacillus amyloliquefaciens plasmid pFTB14

Summary The structure of a 1.5-kb DNA sequence that is necessary and sufficient for the replication of an 8.2-kb cryptic plasmid, pFTB14, isolated from a strain of Bacillus amyloliquefaciens has been characterized. The 1.5-kb DNA sequence contains an open reading frame, rep, stretching for 1017 bp, a promoter region for rep expression, and a possible replication origin for the plasmid upstream of the promoter. The rep product is trans-active and essential for plasmid replication. The predicted rep protein is a basic protein, as are the RepC protein of pT181, RepB of pUB110 and protein A of pC194 (all these found in staphylococci) and the protein of the R6K plasmid of Escherichia coli. The predicted rep protein has highly homologous amino acid sequences with protein A of pC194 and RepC of pUB110 throughout the protein molecule, but not with RepC of pT181, of R6K or protein RepH encoded by and iniating the replication of pC194.     

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1.

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.     

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1.

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.     

Functional analysis of the leading strand replication origin of plasmid pUB110 in Bacillus subtilis.

Supercoiled plasmid DNA is the substrate for initiation of pUB110 replication, and - by inference - for binding of its initiator protein (RepU) to the plasmid replication origin (oriU) in vivo. No hairpin structure is required for RepU-oriU recognition. RepH (the pC194 replication initiation protein) failed to initiate replication in trans at oriU. The nucleotides that determine the specificity of the replication initiation process are located within oriU but termination is unefficient. Therefore the segment that forms the full recognition signal for termination is probably located 3' of the oriU recognition sequence. Two overlapping domains, one for initiation and one required for termination, compose the leading strand replication origin of plasmid pUB110.     

Occurrence of reiterated sequences in an untranslated region of Simian virus 40 DNA determined by nucleotide sequence analysis.

An earlier report (Subramanian, Dhar, and Weissman, 1977c) presented the nucleotide sequence of Eco RII-G fragment of SV40 DNA, which contains the origin of DNA replication. The nucleotide sequence of Eco RII-N fragment located next to Eco RII-G on the physical map of SV40 DNA is presented in this report. Eco RII-N is found to be a tandem duplication of the last 55 nucleotides of Eco RII-G. This tandem repeat is immediately preceded by two other reiterated sequences occurring within Eco RII-G, one of them being a tandem repeat of 21 nucleotides and the other a nontandem repeat of 10 nucleotides. These repetitive sequences occur in close proximity to the origin of DNA replication which is known to contain other specialized sequences such as a few palindromes (one of which is 27 long and possesses a perfect 2-fold axis of symmetry), one "true" palindrome, and a long A/T-rich cluster. The repeats (and the replication origin) occur within an untranslated region of SV40 DNA flanked by (the few) structural genes coding for the "late" proteins on the one side and that (those) coding for the "early" protein(s) on the other side. The reiterated sequences are comparable in some respects to repetitive sequences occurring in eucaryotic DNAs. Possible biological functions of the repeats are discussed.     

Are single-stranded circles intermediates in plasmid DNA replication?

Plasmid pC194 exists as circular double-stranded and single-stranded DNA in Bacillus subtilis and Staphylococcus aureus. We report here that the plasmid pHV33, composed of pBR322 and pC194, exists as double- and single-stranded DNA in Escherichia coli, provided that the replication functions of pC194 are intact. Single-stranded pHV33 DNA is converted to double-stranded DNA by complementary strand synthesis probably initiated at rriB, a primosome assembly site present on pBR322. The efficiency of complementary strand synthesis affects the double-stranded copy number, which suggests that single-stranded DNA is a plasmid replication intermediate.     

Structural relationships among chloramphenicol-resistance plasmids of Staphylococcus aureus

Abstract Twelve different chloramphenicol-resistance (Cm^r) plasmids detected in Staphylococcus aureus strains isolated between 1952 and 1981 were characterized by restriction endonuclease, DNA hybridization and heteroduplex analyses. These studies revealed three families of Cm^r plasmids which were distinguished by their chloramphenicol acetyltransferase sequences; the prototype plasmids of the families were pC221, pC223 and pC194. The cat and replication ( rep ) genes of the plasmid pC221 were highly conserved in other pC221 family members and were related to their homologs in the pC223 family plasmids; however, the cat and rep genes of the pC194 family plasmids were distinct.     

Characterization of a cryptic plasmid from Bacillus sphaericus strain LP1-G

A cryptic plasmid from Bacillus sphaericus strain LP1-G, designated as pLG, was sequenced and characterized. It was an 11,066bp circular molecule, with G+C content of 37%. The plasmid pLG was predicted to encode 23 putative ORFs, and ORF 21 shared the highest identity with Rep of pGI1 and pBMB9741, members of rolling-circle replication (RCR) pC194-family. Sequence analysis revealed a pC194-type double strand origin (dso) and a single strand origin (sso) like sequence located upstream and downstream of ORF 21, respectively. Moreover, Mung bean nuclease analysis and Southern hybridization confirmed the existence of single stranded DNA (ssDNA) intermediates, indicating that pLG belongs to the RCR pC194-family. Accumulation of multiple ssDNA intermediates in native strain LP1-G and decline of ssDNA and supercoiled DNA in rifampicin-treated strain implied that a special mechanism might be employed by pLG. Furthermore, the copy number of pLG in its original host was determined and about 58 copies of the plasmid exist in each cell. Subcloning and transformation experiments proved that the minimal replicon of pLG was within a 1.6-kb fragment, which was composed of rep gene and dso. These data are a good basis for the understanding of replication mechanisms and genetics of this B. sphaericus plasmid.     

Characterization of a cryptic plasmid pM4 from Lactobacillus plantarum M4

A cryptic plasmid from Lactobacillus plantarum M4 isolated from fresh milk, designated as pM4, was sequenced and characterized. It was 3320 bp in length with a G+C content of 38.73 mol%. The plasmid pM4 was predicted to encode three putative ORFs, in which ORF1 shared 99% and 98% homology, respectively, with the Rep proteins of reported plasmids pWCFS101 and pF8801, members of the rolling circle replication (RCR) pC194 family. Sequence analysis revealed a typical pC194 family double strand origin (dso) and a putative single strand origin (sso) located upstream of the rep gene. Mung bean nuclease analysis and Southern hybridization confirmed the presence of single-stranded DNA (ssDNA) intermediates, suggesting that pM4 belongs to the RCR pC194 family. Accumulation of ssDNA in rifampicin-treated strains implied that the host-encoded RNA polymerase was involved in the conversion of ssDNA to double-stranded DNA. Furthermore, the relative copy number of pM4 was estimated to be about 25 in each cell by real-time PCR. The new RCR plasmid would be valuable in constructing cloning vectors for application in the food industry.     

Replication of simian virus 40 origin-containing DNA during infection with a recombinant Autographa californica multiple nuclear polyhedrosis virus expressing large T antigen.

Autographica californica multiple nuclear polyhedrosis virus (AcMNPV) has been shown to encode many of the enzymes involved in the replication of its own DNA. Although the AcMNPV genome contains multiple sets of reiterated sequences that are thought to function as origins of DNA replication, no initiator protein has yet been identified in the set of viral replication enzymes. In this study, the ability of a heterologous origin initiator system to promote DNA replication in AcMNPV-infected cells was examined. A recombinant AcMNPV that expressed the simian virus 40 (SV40) large T antigen was surprisingly found to induce the efficient replication of a transfected plasmid containing an SV40 origin. This replication was subsequently found to involve three essential components: (i) T antigen, since replication of SV40 origin-containing plasmids was not induced by wild-type AcMNPV which did not express this protein; (ii) an intact SV40 core origin, since deletion of specific functional motifs within the origin resulted in a loss of replicative abilities; and (iii) one or more AcMNPV-encoded proteins, since viral superinfection was required for plasmid amplification. Characterization of the replicated DNA revealed that it existed as a high-molecular-weight concatemer and underwent significant levels of homologous recombination between inverted repeat sequences. These properties were consistent with an AcMNPV-directed mode of DNA synthesis rather than that of SV40 and suggested that T antigen-SV40 origin complexes may be capable of initiating DNA replication reactions that can be completed by AcMNPV-encoded enzymes.     

Replication termination for staphylococcal plasmids: plasmids pT181 and pC221 cross-react in the termination process.

We present data which indicate that (i) the origin of replication of plasmids pT181 and pC221 can also function as termination signals; (ii) termination of replication occurs when a round of replication initiated either by RepC at the pT181 origin or by RepD at the pC221 origin reaches either of these origins, proving that the two plasmids cross-react for termination of replication; and (iii) the replication initiated at the origin of another staphylococcal plasmid, pE194, does not terminate at the origin of pT181 or pC221, indicating the existence of a specific relationship between the initiation and termination of a replication event.     

Deletion hot spots in chimeric Escherichia coli plasmids.

Deletions form frequently in chimeric plasmids composed of M13mp2, pBR322, and pC194 (B. Michel and S. D. Ehrlich, Proc. Natl. Acad. Sci. USA 83:3386-3390, 1986). They are generated by joining of the nucleotide neighboring the nick site in the M13 replication origin to a nonadjacent nucleotide. This nucleotide is most often located within particular short plasmid regions, named deletion hot spots. Three natural hot spots were present in the chimeric plasmids. Two were active only when the DNA replication initiated at the M13 origin was allowed to progress; the third was active only in the presence of wild-type amounts of DNA ligase. Three artificial hot spots were generated by creating palindromic sequences in the plasmids.     

Yeast centromeric plasmids as shuttle vectors between Escherichia coli, Bacillus subtilis and Saccharomyces cerevisiae

A number of hybrid plasmids which can autonomously replicate in E. coli, B. subtilis and S. cerevisiae was constructed. Replication of these plasmids both in yeast and in B. subtilis starts on a sequences originating from Staphylococcus aureus plasmids pC194 and pE194. In yeast these hybrids are unstable like those yeast vectors which contain eukaryotic ARSs, but their stability has been increased by addition of yeast centromeric sequence. Both pC194 and pE194 DNAs contain sequences which reveal strong similarities with the yeast ARS consensus. Nevertheless the replication efficiences of these plasmids in yeast are different.     

Characterization of pC7 from Lactobacillus paraplantarum C7 derived from Kimchi and development of lactic acid bacteria--Escherichia coli shuttle vector

A cryptic plasmid pC7 was characterized, which was isolated from Lactobacillus paraplantarum C7 derived from Kimchi, a traditional korean vegetable food. The plasmid pC7 is a circular molecule of 2,134 base-pairs in length with a G + C content of 38.5%. The nucleotide sequence analysis revealed the presence of an open reading frame encoding a putative 317 amino acids protein homologous to replication proteins RepA. Furthermore, a putative double and a single-strand origin were identified. Together with features of nucleotide sequences, the detection of single-stranded intermediate DNA in Lb. paraplantarum demonstrated that pC7 replicates via a rolling circle mechanism. A cloning vector for lactic acid bacteria was developed on the basis of the pC7 replicon, into which were inserted an erythromycin resistance gene as a marker, multiple cloning sites, and Escherichia coli ColE1 replication origin. E. coli and several species of Lactobacillus and Leuconostoc can be transformed with the resultant vector. Therefore, pC7 derivatives may be useful LAB-E. coli shuttle vectors, which are essential in engineering important strains in food fermentation.     

Plasmid structural instability associated with pC194 replication functions

The hybrid plasmid pJS37 is composed of the streptococcal plasmid pLS1, which confers tetracycline resistance, and the staphylococcal plasmid pC194, which confers chloramphenicol resistance. When gram-positive bacteria containing pJS37 were grown in the presence of chloramphenicol, four different deleted derivatives accumulated. The deletions in the plasmid enhanced resistance to chloramphenicol by placing the cat gene of pC194 near promoters of pLS1. All four deletions shared a common endpoint that corresponded to the putative target site for DNA strand nicking by the pC194 replication protein, RepH. At the other, variable endpoint, the DNA sequence was similar to the putative RepH target sequence. Alteration of the RepH protein, by in vitro modification of the gene encoding it, eliminated this class of deletions. By extending a previously proposed model for the generation of a different but related class of deletions (B. Michel and S.D. Ehrlich, EMBO J. 5:3691-3696, 1986), a comprehensive model that could generate both classes of deletions is suggested. It proposes that a nicking-closing activity of the plasmid replication protein at its normal target site and, aberrantly, at sites with similar sequence can generate deletions either proximal or distal to the aberrant site during rolling-circle replication of the plasmid.     

Molecular analysis of the Lactococcus lactis subspecies lactis CNRZ270 bidirectional theta replicating lactose plasmid pUCL22

pUCL22 is the lactose protease plasmid of Lactococcus lactis ssp. lactis CNRZ270. The nucleotide sequence of its replication region Rep22 contains a non-transcribed region, the replication origin, followed by a gene encoding a putative 388-amino-acid protein named Rep22A. The promoter regions of the rep22A and pC194 cat genes share strong similarities and the pUCL22 replicon exerted trans or cis negative control on the pC194 cat gene expression in L. lactis. We suggest that Rep22A binds to its own promoter as well as to the pC194 cat promoter and thus is autoregulated. We show that pUCL22 replicates mainly by a bidirectional theta mechanism in L. lactis, and is representative of a widely distributed replicon family, members of which could be co-resident. We propose that compatibility between these closely related replicons results from minor replication protein modifications coupled with base changes in their respective binding sites, supporting the co-existence of numerous related replicons in lactococcal strains.