共查询到20条相似文献,搜索用时 46 毫秒
1.
SCOTT N. JOHNSON PAUL D. HALLETT TRUDI L. GILLESPIE CLAIRE HALPIN 《Physiological Entomology》2010,35(2):186-191
Plants exploit an array of defences against insect herbivores based on chemical and biomechanical properties. There is increasing evidence that plant toughness comprises a particularly effective defence against herbivory, yet studies to date have focussed exclusively on leaf toughness and folivore behaviour. The relationship between root mechanical properties and the chewing behaviour of a root‐feeding insect, the Agriotes spp. wireworm (Coleoptera: Elateridae L.), feeding on tobacco (Nicoiana tabacum) is investigated. Root toughness is manipulated using introduced transgenes for the down‐regulation of key enzymes in the lignin biosynthesis pathway: cinnamoyl‐CoA reductase (CCR line) and caffeate O‐methyltransferase and cinnamyl alcohol dehydrogenase (CO line). Two biomechanical analyses (i.e. conventional cutting and notched tensile) are conducted to quantify root toughness on both lines. Roots from the CO line are significantly tougher than those of the CCR line in terms of fracture toughness and fracture energy, although not for cutting energy or stiffness. Bioassays that compel wireworms to chew through roots demonstrate that only 30% can penetrate roots of the CO line compared with 90% on the CCR line. It takes wireworms over twice as long to penetrate roots from the CO line (8 h) compared with CCR roots (3.5 h). There is a statistically significant positive relationship between penetration time and fracture toughness evaluated with tensile tests, although not with cutting energy from cutting tests. Using this exploratory model system, it is concluded that root toughness derived from tensile tests is a practical indicator of the ability of root‐feeding insects to penetrate roots. 相似文献
2.
Kitajima K Llorens AM Stefanescu C Timchenko MV Lucas PW Wright SJ 《The New phytologist》2012,195(3):640-652
Cell wall fibre and lamina density may interactively affect leaf toughness and leaf lifespan. Here, we tested this with seedlings of 24 neotropical tree species differing in shade tolerance and leaf lifespan under standardized field conditions (140-867 d in gaps; longer in shade). We quantified toughness with a cutting test, explicitly seeking a mechanistic linkage to fibre. Lamina density, but not fracture toughness, exhibited a plastic response to gaps vs shade, while neither trait was affected by leaf age. Toughness corrected for lamina density, a recently recognized indicator of material strength per unit mass, was linearly correlated with cellulose content per unit dry mass. Leaf lifespan was positively correlated with cellulose and toughness in shade-tolerant species but only weakly in gap-dependent species. Leaf lifespan was uncorrelated with lamina thickness, phenolics and tannin concentrations. In path analysis including all species, leaf lifespan was directly enhanced by density and toughness, and indirectly by cellulose via its effect on toughness. Different suites of leaf traits were correlated with early seedling survival in gaps vs shade. In conclusion, cellulose and lamina density jointly enhance leaf fracture toughness, and these carbon-based physical traits, rather than phenolic-based defence, explain species differences in herbivory, leaf lifespan and shade survival. 相似文献
3.
Durkan R Gürbüz A Yilmaz B Ozel MB Bagis B 《Journal of applied biomaterials & functional materials》2012,10(1):e37-e42
Introduction: Microwave and water bath postpolymerization have been suggested as methods to improve the mechanical properties of heat and autopolymerizing acrylic resins. However, the effects of autoclave heating on the fracture properties of autopolymerizing acrylic resins have not been investigated. Purpose: The aim of this study was to assess the effectiveness of various autoclave postpolymerization methods on the fracture properties of 3 different autopolymerizing acrylic resins. Methods: Forty-two specimens of 3 different autopolymerizing acrylic resins (Orthocryl, Paladent RR and Futurajet) were fabricated (40x8x4mm), and each group was further divided into 6 subgroups (n=7). Control group specimens remained as processed (Group 1). The first test group was postpolymerized in a cassette autoclave at 135°C for 6 minutes and the other groups were postpolymerized in a conventional autoclave at 130°C using different time settings (5, 10, 20 or 30 minutes). Fracture toughness was then measured with a three-point bending test. Data were analyzed by ANOVA followed by the Duncan test (α=0.05). Results: The fracture toughness of Orthocryl and Paladent-RR acrylic resins significantly increased following conventional autoclave postpolymerization at 130°C for 10 minutes (P<.05). However, the fracture toughness of autoclave postpolymerized Futurajet was not significantly different than its control specimens (P<.05). The fracture toughness of Futurajet was significantly less than Paladent RR and Orthocryl specimens when autoclaved at 130°C for 10 minutes. Conclusions: Within the limitations of this study, it can be suggested that autoclave postpolymerization is an effective method for increasing the fracture toughness of tested autoploymerized acrylic resins. 相似文献
4.
Methods of assessing leaf-fracture properties 总被引:4,自引:0,他引:4
Numerous authors have attempted to quantify the physical properties of leaves in relation to aspects of leaf ecology, including decomposition, sclerophylly, herbivory, and leaf function and longevity. This paper examines the relative merits of the punch-and-die, tearing and shearing tests for assessing leaf physical properties. We conducted a series of these three mechanical tests on leaves of Solanum laciniatum , and determined the effect of various test parameters on the measurement of fracture properties. For the punch-and-die test, the parameters considered were machine speed, clearance between the punch and the die, edge definition of the punch, and area of the punch. Aspects of the tearing test examined were notch length, end effects, and length-to-width requirements of test strips, and for shearing tests the effects of blade proximity, angle and sharpness were investigated. All the test parameters investigated were found significantly to affect the assessment of leaf-fracture properties. In addition, fracture properties were found to vary significantly within leaves. Some general principles for designing and implementing tests are outlined. This study suggests that while punching and shearing tests are useful means of quantifying leaf fracture properties, the value of the tearing test may be reduced as it is most constrained by the biological nature of the test material. 相似文献
5.
Fracture toughness and fatigue crack propagation rate of short fiber reinforced epoxy composites for analogue cortical bone 总被引:1,自引:0,他引:1
Third-generation mechanical analogue bone models and synthetic analogue cortical bone materials manufactured by Pacific Research Laboratories, Inc. (PRL) are popular tools for use in mechanical testing of various orthopedic implants and biomaterials. A major issue with these models is that the current third-generation epoxy-short fiberglass based composite used as the cortical bone substitute is prone to crack formation and failure in fatigue or repeated quasistatic loading of the model. The purpose of the present study was to compare the tensile and fracture mechanics properties of the current baseline (established PRL "third-generation" E-glass-fiber-epoxy) composite analogue for cortical bone to a new composite material formulation proposed for use as an enhanced fourth-generation cortical bone analogue material. Standard tensile, plane strain fracture toughness, and fatigue crack propagation rate tests were performed on both the third- and fourth-generation composite material formulations using standard ASTM test techniques. Injection molding techniques were used to create random fiber orientation in all test specimens. Standard dog-bone style tensile specimens were tested to obtain ultimate tensile strength and stiffness. Compact tension fracture toughness specimens were utilized to determine plane strain fracture toughness values. Reduced thickness compact tension specimens were also used to determine fatigue crack propagation rate behavior for the two material groups. Literature values for the same parameters for human cortical bone were compared to results from the third- and fourth-generation cortical analogue bone materials. Tensile properties of the fourth-generation material were closer to that of average human cortical bone than the third-generation material. Fracture toughness was significantly increased by 48% in the fourth-generation composite as compared to the third-generation analogue bone. The threshold stress intensity to propagate the crack was much higher for the fourth-generation material than for the third-generation composite. Even at the higher stress intensity threshold, the fatigue crack propagation rate was significantly decreased in the fourth-generation composite compared to the third-generation composite. These results indicate that the bone analogue models made from the fourth-generation analogue cortical bone material may exhibit better performance in fracture and longer fatigue lives than similar models made of third-generation analogue cortical bone material. Further fatigue testing of the new composite material in clinically relevant use of bone models is still required for verification of these results. Biomechanical test models using the superior fourth-generation cortical analogue material are currently in development. 相似文献
6.
An experimental compliance calibration method for measuring crack length in fracture toughness tests of cortical bone was developed. Calibration tests were conducted on twenty compact type fracture specimens machined from the mid-diaphysis of five pairs of equine third metacarpal bones. Specimens were oriented for crack propagation in a direction transverse to the longitudinal axis of the bone. Specimen compliance was determined from the load vs. crack opening displacement record over a range of crack lengths from 0.48 to 0.75 times the specimen width. The results demonstrate that the compliance calibration method developed for isotropic materials can be used to determine crack length in bone, which is transversely isotropic. However, specimens from lateral and dorsal regions exhibited significantly different compliance calibrations even after differences in elastic modulus were taken into account in the normalized compliance. 相似文献
7.
Fracture toughness and crack tip opening angle were measured for bovine patellar cartilage using modified single-edged notch specimens of two thicknesses. There was no difference in fracture toughness between thin (0.7 mm) versus relatively thick (2.7 mm) specimens, but the crack tip opening angle at initiation of crack propagation was larger for the thin specimens (106 deg) than for the thick specimens (70 deg). Fracture toughness of the bovine patellar cartilage (1.03 kJ/m2) was not statistically different than that reported previously for canine patellar cartilage (1.07 kJ/m2) employing the same methods. Large variation in measurements for both bovine and canine cartilage are in part attributable to variation between individual animals, and are consistent with variation in other mechanical property measurements for articular cartilage. The observed reduction in crack tip opening angle with increased specimen thickness is consistent with behavior of some engineering materials, and demonstrates that specimen thickness influences fracture behavior for bovine patellar cartilage. 相似文献
8.
The distinctive feature of leaf‐rolling weevils is their special care for their progeny. In many species among the family Attelabidae, the female recognizes the size and shape of the leaf of the host‐plant and does the leaf cutting by a definite method. The location of cutting line, length and shape becomes the basic information in understanding the most fundamental structure of female's recognition process and cradle formation strategy. Leaf cutting is not only the process of withering the leaf by blocking the water flow along the main vein but also the process of making reversal easy at the leaf‐blade part. The difference in forms of cutting line, leaf blade, interval or dispersion of nibble marks on the stem and pitch of leaf rolling has effects on the shape of the completed cradle. In the present paper we provide leaf‐cutting patterns and the cradle formation process for 13 species of subfamily Apoderinae. We also provide a pictorial key of the cradle for the first time in Korea. 相似文献
9.
In vivo, bone cement is subject to cyclic loading in a fluid environment. However, little is known about the effect of moisture absorption on the fatigue crack propagation resistance of bone cement. The effect of moisture absorption at 37 degrees C on the fatigue crack propagation resistance of a common bone cement (Endurance, DePuy, Orthopaedics, Inc.) was examined. Preliminary fracture toughness tests were conducted on disk-shaped, vacuum-mixed cement specimens (compact tension type) that were cyclically pre-cracked. Plain-strain fracture toughness K(IC) (MPa square root(m)) was determined. To study the effect of moisture absorption four treatment groups, with different soaking periods in Ringer's at 37 degrees C, of Endurance cement were tested. The specimens weights prior to and following soaking showed a significant increase in mean weight for specimens soaked for 8 and 12 weeks. Linear regression analysis of log(da/dN) vs. log (deltaK) was conducted on the combined data in each fatigue test group. Soaking bone cement in Ringer's at 37 degrees C for 8 and 12 weeks lead to an improvement in fatigue crack propagation resistance, that may be related to water sorption that increases polymer chain mobility, with enhanced crack tip blunting. It may be more physiologically relevant to conduct in vitro studies of fatigue and fracture toughness of bone cements following storage in a fluid environment. 相似文献
10.
The growth of primordia of marginal buds (marginals) which differentiate on leaf margins is correlatively inhibited on intactBryophyllum crenatum plants. Following leaf isolation, the marginals are released from this correlative inhibition, which process is
accompanied within 2 to 10 h after leaf isolation with a decrease in the content of endogenous IAA in the leaf blade. This
decrease can be enhanced by transversal cutting of the leaf blade into three parts which also results in enhanced subsequent
growth of the marginals. The growth which follows after the release of the marginals from correlative inhibition is accompanied
in cut leaf blades with an increased content of endogenous IAA in the period from 12 h to 7 d after leaf isolation when compared
with uncut leaf blades. The highest content of endogenous IAA was recorded in the middle section, and the lowest IAA content
in the basal section of the leaf blade. 相似文献
11.
12.
Dentin, the mineralized tissue forming the bulk of the tooth, lies between the enamel and the pulp chamber. It is a rich source of inspiration for designing novel synthetic materials due to its unique microstructure. Most of the previous studies investigating the fracture toughness of dentin have used linear-elastic fracture mechanics (LEFM) that ignores plastic deformation and could underestimate the toughness of dentin. With the presence of collagen (approximately 30% by volume) aiding the toughening mechanisms in dentin, we hypothesize that there is a significant difference between the fracture toughness estimated using LEFM (Kc) and elastic-plastic fracture mechanics (EPFM) (KJc). Single-edge notched beam specimens with in-plane (n=10) and anti-plane (n=10) parallel fractures were prepared following ASTM standard E1820 and tested in three-point flexure. KJc of the in-plane parallel and anti-plane parallel specimens were found to be 3.1 and 3.4 MPa m 1/2 and Kc were 2.4 and 2.5 MPa m 1/2, respectively. The fracture toughness estimated based on KJc is significantly greater than that estimated based on Kc (32.5% on average; p<0.001). In addition, KJc of anti-plane parallel specimens is significantly greater than that of in-plane parallel specimens. We suggest that, in order to critically evaluate the fracture toughness of human dentin, EPFM should be employed. 相似文献
13.
Leaf biomechanical properties have the potential to act as antiherbivore defences. However, compared with studies on chemical defences, there are few studies that have demonstrated that the physical or biomechanical structure of plants can prevent or influence herbivory. This difference in focus by ecologists may relate to the dominant paradigm of plant chemical defences in ecological research and the perceived difficulties that ecologists have with the engineering principles embedded in biomechanics. The advantage of using materials engineering concepts is that each property is precisely defined and quantifiable, although the latter may be difficult in leaves because of their composite and anisotropic nature. Most herbivory studies have used simple penetrometers to measure leaf properties, often termed ‘toughness’. As defined in materials engineering, the measured properties are ‘force to fracture’ and ‘strength’, not toughness. Measurement of strength, the resistance to crack initiation, is relevant to understanding herbivory. Measurement of ‘toughness’ as defined by materials engineering is also relevant. Toughness is the resistance to crack propagation and is a measure of the energy required to fracture the leaf. This requires more sophisticated equipment than simple penetrometers because it requires a simultaneous measure of the punch displacement. In addition, purists would argue that a punch cannot be used to measure true toughness because the crack is not controlled and plastic deformation is also involved. However, it may be the only method that allows detection of fine‐scale pattern in mechanical properties across a leaf surface at a scale that is relevant to herbivory. There is very little work on the scale at which these properties vary, particularly with regard to different sized herbivores. In addition, few studies have investigated a broad range of relevant biomechanical properties in relation to herbivory. Therefore, it is not possible yet to be definitive about the relative merits of the various types of tests. A single test might show a pattern in relation to herbivore damage at a gross level. However, to really understand the functional and ecological significance of leaf texture in relation to herbivory, a more reductionist approach is needed. Only then can we move on to the larger scales of pattern that many ecologists are seeking. 相似文献
14.
It has been proposed that cortical bone derives its toughness by forming microcracks during the process of crack propagation (J. Biomech. 30 (1997) 763; J. Biomech. 33 (2000) 1169). The purpose of this study was to experimentally validate the previously proposed microcrack-based toughening mechanism in cortical bone. Crack initiation and propagation tests were conducted on cortical bone compact tension specimens obtained from the antlers of red deer. For these tests, the main fracture crack was either propagated to a predetermined crack length or was stopped immediately after initiating from the notch. The microcracks produced in both groups of specimens were counted in the same surface area of interest around and below the notch, and crack growth resistance and crack propagation velocity were analyzed. There were more microcracks in the surface area of interest in the propagation than in initiation specimens showing that the formation of microcracks continued after the initiation of a fracture crack. Crack growth resistance increased with crack extension, and crack propagation velocity vs. crack extension curves demonstrated the characteristic jump increase and decrease pattern associated with the formation of microcracks. The scanning electron micrographs of crack initiation and propagation displayed the formation of a frontal process zone and a wake, respectively. These results support the microcrack-based toughening mechanism in cortical bone. Bone toughness is, therefore, determined by its ability to form microcracks during fracture. 相似文献
15.
Westbrook JW Kitajima K Burleigh JG Kress WJ Erickson DL Wright SJ 《The American naturalist》2011,177(6):800-811
Slow-growing juveniles of shade-tolerant plant species are predicted to have tough leaves because of the high cost of leaf replacement in shade relative to potential carbon gain. We assessed the degree of correlated evolution among eight traits associated with leaf toughness and the relationships of those traits with the growth and mortality rates of 197 tree and shrub species from the understory of the 50-ha forest dynamics plot on Barro Colorado Island, Panama. Path analysis with phylogenetically independent contrasts revealed that leaves attained material toughness (resistance to fracture per unit fracture area) through increases in tissue density, percent cellulose per unit dry mass, and vein fracture toughness. Lamina density and cellulose content evolved independently and thus represent different paths to material toughness. Structural toughness (resistance to fracture per unit fracture length) depended on material toughness and lamina thickness. Mortality rates of individuals 1-10 cm in stem diameter were negatively correlated with material toughness and lamina density but were independent of structural toughness and cell wall fiber contents. Leaf toughness traits were uncorrelated with relative growth rates. Results imply that material toughness enhances resistance to natural enemies, which increases survival and offsets the biomass allocation cost of producing tough leaves in the shaded understory. 相似文献
16.
Previous studies of the fracture properties of cortical bone have suggested that the fracture toughness increases with crack length, which is indicative of rising R-curve behavior. Based on this indirect evidence and the similarity of bone to ceramic matrix composites, we hypothesized that bone would exhibit rising R-curve behavior in the transverse orientation and that the characteristics of the R-curves would be regionally dependent within the cortex due to variations in bone microstructure and toughening mechanisms. To test these hypotheses, we conducted R-curve experiments on specimens from equine third metacarpal bones using standard fracture mechanics testing methods. Compact type specimens from the dorsal and lateral regions in the middle of the diaphysis were oriented for crack propagation transverse to the longitudinal axis of the bone.The test results demonstrate that equine cortical bone exhibits rising R-curve behavior during transverse crack propagation as hypothesized. Statistical analyses of the crack growth initiation toughness, K0, the peak toughness, Kpeak, and the crack extension at peak toughness, deltaa, revealed significant regional differences in these characteristics. Specifically, the lateral cortex displayed higher crack growth initiation and peak toughnesses. The dorsal cortex exhibited greater crack extension at the peak of crack growth resistance. Scanning electron microscopy revealed osteon pullout on fracture surfaces from the dorsal cortex and but not in the lateral cortex. Taken together, the significant differences in R-curves and the SEM fractography indicate that the fracture mechanisms acting in equine cortical bone are regionally dependent. 相似文献
17.
The purpose of this work is to investigate the use of indentation fracture as a method of measuring toughness at the microscale in cortical bone. Indentation fracture employs sharp indenters to initiate cracks, whose length can be used to calculate the toughness of the material. Only a cube corner indenter tip is found to initiate cracks at a suitable size scale for microstructural measurement. Cracks from 7 to 56 microm in length are produced using loads from 0.05 to 3N. Preliminary data predicts rising toughness with increasing crack length (rising R-curve behaviour) at the microscale. This technique provides a new insight into fracture in cortical bone since it allows the investigator to observe mechanisms and measure toughness at a size scale at which in vivo damage is known to exist. 相似文献
18.
目的通过改进螺旋剪法建立制备气管螺旋条的旋割法。方法 40只豚鼠,用旋割法和螺旋剪法制备离体豚鼠气管螺旋条,在Kreb's液中平衡孵育2 h后,以组胺histamine(浴槽浓度2.0×10-3g/L)和乙酰胆碱acetylcholine(浴槽浓度2.0×10-4g/L)引发气管螺旋条收缩,用BL420生物信号采集系统与张力传感器测定标本张力变化值。数据采用SPSS11.5软件在α=0.05的信度下进行t检验。结果 2 g负荷下,旋割法标本histamine引发收缩幅度是螺旋剪法制备标本的1.31倍,乙酰胆碱引发收缩幅度旋割法是螺旋剪法制备标本的1.208倍,经t检验,P〈0.05,差异均具有显著性;旋割法标本,histamine引发2 g负荷标本收缩幅度是1 g负荷的1.48倍,乙酰胆碱引发2 g负荷标本的收缩幅度是1 g负荷的1.38倍,经t检验,P〈0.05,差异均具有显著性;旋割法标本经hista-mine或acetylcholine激发收缩,洗净药物重复激发6次收缩幅度的RSD值分别为19.8%和19.1%,螺旋剪法标本经histamine或acetylcholine 6次重复引发诱发收缩幅度的RSD值分别35.3%和33.7%。结论与螺旋剪法制备气管螺旋条标本比较,旋割法制备螺旋条标本对收缩诱导剂histamine与acetylcholine的敏感性高,标本负荷以2 g较好,旋割法标本重复利用收缩幅度变化值较螺旋剪法标本小。 相似文献
19.
There are several very accurate methods to determine leaf angles in closed canopies. However, these are generally very time-consuming or require special equipment. Average canopy leaf angles were derived from simple height and blade length measurements. An exponential relationship between the height/length ratio and the average blade leaf angle was used. The method was tested for two grass species, Dactylis glomerata and Festuca arundinacea, grown under different UV-B levels. The results clearly show that the method is reasonably accurate and able to identify UV-B induced changes in leaf angle. To get these results only 50 measurements of leaf blade height and length were necessary to calculate the allometric relationship, after which 10 length and height measurements from a canopy were used to calculate the average canopy leaf angle. 相似文献
20.
Effects of light and nutrient availability on leaf mechanical properties of Plantago major: a conceptual approach 总被引:2,自引:0,他引:2
BACKGROUND AND AIMS: Leaf mechanical properties, which are important to protect leaves against physical stresses, are thought to change with light and nutrient availabilities. This study aims to understand phenotypic changes of leaf mechanical properties with respect to dry mass allocation and anatomy. METHODS: Leaf lamina strength (maximum force per unit area to fracture), toughness (work to fracture) and stiffness (resistance against deformation) were measured by punch-and-die tests, and anatomical and physiological traits were determined in Plantago major plants grown at different light and nutrient availabilities. A conceptual approach was developed by which punch strength and related carbon costs can be quantitatively related to the underlying anatomical and morphological traits: leaf thickness, dry-mass allocation to cell walls and cell-wall-specific strength. KEY RESULTS: Leaf lamina strength, toughness and stiffness (all expressed on a punch area basis) increased with light availability. By contrast, nutrient availability did not change strength or toughness, but stiffness was higher in low-nutrient plants. Punch strength (maximum force per unit punch area, F(max)/area) was analysed as the product of leaf mass per area (LMA) and F(max)/leaf mass (= punch strength/LMA, indicating mass-use efficiency for strength). The greater strength of sun leaves was mainly explained by their higher LMA. Shade leaves, by contrast, had a higher F(max)/leaf mass. This greater efficiency in shade leaves was caused by a greater fraction of leaf mass in cell walls and by a greater specific strength of cell walls. These differences are probably because epidermis cells constitute a relatively large fraction of the leaf cross-section in shaded leaves. Although a larger percentage of intercellular spaces were found in shade leaves, this in itself did not reduce 'material' strength (punch strength/thickness); it might, however, be important for increasing distance between upper and lower epidermis per unit mass and thus maintaining flexural stiffness at minimal costs. CONCLUSIONS: The consequences of a reduced LMA for punch strength in shaded leaves was partially compensated for by a mechanically more efficient design, which, it is suggested, contributes importantly to resisting mechanical stress under carbon-limited conditions. 相似文献