DNA bending in the mycobacterial plasmid pAL5000 origin-RepB complex

Plasmid pAL5000 represents a family of relatively newly discovered cryptic plasmids in gram-positive Actinomycetes bacteria. The replication regions of these plasmids comprise a bicistronic operon, repA-repB, encoding two replication proteins. Located upstream is a cis-acting element that functions as the origin of replication. It comprises an ~200-bp segment spanning two binding sites for the replication protein RepB, a low-affinity (L) site and a high-affinity (H) site separated by an ~40-bp spacer sequence. The trajectory of the DNA in the RepB-origin complex has been investigated, and it has been found that the origin undergoes significant bending movements upon RepB binding. RepB binding not only led to local bending effects but also caused a long-range polar curvature which affected the DNA sequences 3′ to the H site. These movements appear to be essential for the in-phase alignment of the L and H sites that leads to the formation of a looped structure. A novel property of RepB unearthed in this study is its ability to form multimers. This property may be an important factor that determines the overall trajectory of the DNA in the RepB-origin complex. The results presented in this study suggest that the origins of replication of pAL5000 and related plasmids are highly flexible and that multimeric, RepB-like initiator proteins bind the origin and induce local deformations and long-range curvatures which are probably necessary for the proper functioning of the origin.     

Origin binding activity of the Mycobacterial plasmid pAL5000 replication protein RepB is stimulated through interactions with host factors and coupled expression of repA

The minimal replication region of the mycobacterial plasmid pAL5000 encompasses the replication origin (ori) and two tandemly organized replication genes, repA and repB, the functions of which are not clearly known. It was observed that when the repA and repB genes were expressed in Escherichia coli, a strong ori binding activity was generated in the host cells. Inactivation of repB led to a complete loss of activity, whereas inactivation of repA had a partial effect, indicating that while repB plays an important role in the process, its activity is stimulated through coexpression of repA. However, this stimulatory effect could be demonstrated only when expression of repA and that of repB were coupled. At a relatively high concentration (1,000 nM), the purified RepB protein was found to form an ori complex with low specificity, which was sensitive to high salt concentrations and challenge by a nonspecific competitor. In contrast, the complex formed by an extract of repA-repB-expressing cells was highly specific and was resistant to both types of challenges. At a 10-fold-lower concentration, RepB did not exhibit ori binding activity, but it could nevertheless form a salt-resistant ori complex in vitro, provided that host factors were present. Antibody supershift experiments indicated that RepB is a key component of the specific complex formed by extracts prepared from E. coli cells expressing the repA and repB genes and also from mycobacterial cells harboring pAL5000-derived vectors. The results indicate that in vivo RepB interacts with host factors and forms an ori complex, but this activity is maximal only when there is coupled expression of repA.     

Evolutionary link between the mycobacterial plasmid pAL5000 replication protein RepB and the extracytoplasmic function family of σ factors

Mycobacterial plasmid pAL5000 represents a family of plasmids found mostly in the Actinobacteria. It replicates using two plasmid-encoded proteins, RepA and RepB. While BLAST searches indicate that RepA is a replicase family protein, the evolutionary connection of RepB cannot be established, as no significant homologous partner (E < 10(-3)) outside the RepB family can be identified. To obtain insight into the structure-function and evolutionary connections of RepB, an investigation was undertaken using homology modeling, phylogenetic, and mutational analysis methods. The results indicate that although they are synthesized from the same operon, the phylogenetic affinities of RepA and RepB differ. Thus, the operon may have evolved through random breaking and joining events. Homology modeling predicted the presence of a three-helical helix-turn-helix domain characteristic of region 4 of extracytoplasmic function (ECF) σ factors in the C-terminal region of RepB. At the N-terminal region, there is a helical stretch, which may be distantly related to region 3 of σ factors. Mutational analysis identified two arginines indispensable for RepB activity, one each located within the C- and N-terminal conserved regions. Apart from analyzing the domain organization of the protein, the significance of the presence of a highly conserved A/T-rich element within the RepB binding site was investigated. Mutational analysis revealed that although this motif does not bind RepB, its integrity is important for efficient DNA-protein interactions and replication to occur. The present investigation unravels the possibility that RepB-like proteins and their binding sites represent ancient DNA-protein interaction modules.     

Transposition-induced structural instability of Escherichia coli-mycobacteria shuttle vectors

Escherichia coli-mycobacteria shuttle vectors, derived from pAL5000 (a mycobacterial plasmid) and pUC19, were frequently found to undergo structural alterations due to transposition of IS1096, a Mycobacterium smegmatis transposable element, at a cluster of sites located within a small region of 60 bp, immediately upstream of a kanamycin resistance gene present in these vectors. The structural alterations led to deletion of large regions of the vector which, in several cases, were found to extend into the ORF2 (RepB) coding sequences of the pAL5000 replication region without affecting its replication capability. This suggests that the entire ORF2 coding sequences of the pAL5000 replication region may not be essential for replication of pAL5000-derived vectors. The deletion derivatives, which contain the minimal sequences required for replication and selection in mycobacteria, were found to be structurally stable and therefore these could be potentially used as stable vector systems for the transformation of mycobacteria.     

Translational coupling to an upstream gene promotes folding of the mycobacterial plasmid pAL5000 replication protein RepB and thereby its origin binding activity

In the mycobacterial plasmid pAL5000 replication region, the replication genes repA and repB are organized in an operon. Earlier, a RepB-dependent origin binding activity was detected in Escherichia coli cells expressing the repA-repB operon. This activity was maximal when expression of the two genes was coupled (A. Basu, M. Chawla-Sarkar, S. Chakrabarti, and S. K. Das Gupta, J. Bacteriol. 184:2204-2214, 2002). In this study we have shown that translational coupling makes a significant difference in the structure and function of RepB. When repB expression was coupled to repA, the polypeptide folded into an active structure (referred to as RepB*), which possessed higher helical content than RepB expressed independently. RepB* could also be distinguished from the less active RepB on the basis of sensitivity to OmpT, an outer membrane protease of E. coli: RepB* was sensitive to the protease, whereas RepB was resistant. Similar conformational differences between RepB* and RepB could be observed when repA was replaced with an unrelated gene, malE (encoding maltose binding protein). These results show that translational coupling of repB to an upstream gene is necessary for better folding and origin binding activity. It is speculated that in coupled systems where translation machinery is passed on from the upstream to the downstream open reading frame, cotranslational folding of the polypeptide expressed from the downstream open reading frame is enhanced due to increased folding competence of translationally primed ribosomes.     

Analysis of the replication region of a mycobacterial plasmid, pMSC262.

We determined the nucleotide sequence of a DNA fragment which contains the replication region of pMSC262, a Mycobacterium scrofulaceum plasmid used to construct the Mycobacterium-Escherichia coli shuttle vector. The complete sequence of the fragment contained 2,504 bp with an overall G+C content of 69.8%. By deletion analysis, we found that the minimum length required for plasmid replication in M. bovis BCG was about 1.6 kb. Within this region, several open reading frames (ORFs) and a putative replication origin (ori) were identified by computer analysis. One of the ORFs, ORF2, which encodes a putative 28.9-kDa basic protein with characteristics of DNA-binding proteins, appeared to be involved in replication of the plasmid in BCG. By separation of ORF2 and the putative ori region, it was revealed that the relative locations of ORF2 and the putative ori region are likely important for replication in BCG. No DNA or amino acid homologies were found between this replication region and that of pAL5000, another mycobacterial plasmid used for vector plasmid construction. In addition, we found that this replicon did not lead to replication in E. coli and was compatible in BCG with pAL5000-derived vector plasmid pYUB75 (R. G. Barletta, D. D. Kim, S. B. Snapper, B. R. Bloom, and W. R. Jacobs, J., J. Gen. Microbiol. 138:23-30, 1992).     

Interactions between the RepB initiator protein of plasmid pMV158 and two distant DNA regions within the origin of replication

Plasmids replicating by the rolling circle mode usually possess a single site for binding of the initiator protein at the origin of replication. The origin of pMV158 is different in that it possesses two distant binding regions for the initiator RepB. One region was located close to the site where RepB introduces the replication-initiating nick, within the nic locus; the other, the bind locus, is 84bp downstream from the nick site. Binding of RepB to the bind locus was of higher affinity and stability than to the nic locus. Contacts of RepB with the bind and nic loci were determined through high-resolution footprinting. Upon binding of RepB, the DNA of the bind locus follows a winding path in its contact with the protein, resulting in local distortion and bending of the double-helix. On supercoiled DNA, simultaneous interaction of RepB with both loci favoured extrusion of the hairpin structure harbouring the nick site while causing a strong DNA distortion around the bind locus. This suggests interplay between the two RepB binding sites, which could facilitate loading of the initiator protein to the nic locus and the acquisition of the appropriate configuration of the supercoiled DNA substrate.     

Molecular analysis of the replication region of the theta-replicating plasmid pUCL287 from Tetragenococcus (Pediococcus) halophilus ATCC33315

The complete nucleotide sequence of the 8.7-kb theta-replicating plasmid pUCL287 from Tetragenococcus halophilus (formerly Pediococcus halophilus) ATCC33315 has been determined. The replication region was identified and analyzed. Its nucleotide sequence contains an untranslated region, the replication origin, followed by two open reading frames (ORFs) encoding two proteins of 311 (RepA287) and 168 (RepB287) amino acids, respectively. Evidence is presented to show that RepA287 represents the plasmid replication protein. RepB287, which is non-essential for replication, is involved in the plasmid copy-number control and segregational stability. The roles of lactococcal proteins homologous to RepB287 have not been defined so far. Nevertheless, the structural organization of the pUCL287 replication region is remarkably similar to those of well known theta-replicating lactococcal plasmids despite the absence of homology of the replication origin and of the replication protein, and this suggests that pUCL287 uses the same mechanism of replication. Nucleotide sequence comparisons show that pSMB74, a pediococcal plasmid encoding bacteriocin production, is a member of the pUCL287 replicon family.     

Analysis of functional domains of Rts1 RepA by means of a series of hybrid proteins with P1 RepA.

The RepA protein of the plasmid Rts1, consisting of 288 amino acids, is a trans-acting protein essential for initiation of plasmid replication. To study the functional domains of RepA, hybrid proteins of Rts1 RepA with the RepA initiator protein of plasmid P1 were constructed such that the N-terminal portion was from Rts1 RepA and the C-terminal portion was from P1 RepA. Six hybrid proteins were examined for function. The N-terminal region of Rts1 RepA between amino acid residues 113 and 129 was found to be important for Rts1 ori binding in vitro. For activation of the origin in vivo, an Rts1 RepA subregion between residues 177 and 206 as well as the DNA binding domain was required. None of the hybrid initiator proteins activated the P1 origin. Both in vivo and in vitro studies showed, in addition, that a C-terminal portion of Rts1 RepA was required along with the DNA binding and ori activating domains to achieve autorepression, suggesting that the C-terminal region of Rts1 RepA is involved in dimer formation. A hybrid protein consisting of the N-terminal 145 amino acids of Rts1 and the C-terminal 142 amino acids from P1 showed strong interference with both Rts1 and P1 replication, whereas other hybrid proteins showed no or little effect on P1 replication.     

In vitro recognition of the replication origin of pLS1 and of plasmids of the pLS1 family by the RepB initiator protein.

Rolling-circle replication of plasmid pLS1 is initiated by the plasmid-encoded RepB protein, which has nicking-closing (site-specific DNA strand transferase) enzymatic activity. The leading-strand origin of pLS1 contains two regions, (i) the RepB-binding site, constituted by three directly repeated sequences (iterons or the bind region), and (ii) the sequence where RepB introduces the nick to initiate replication (the nic region). A series of plasmids, belonging to the pLS1 family, show features similar to those of pLS1 and have DNA sequences homologous to the pLS1 nic region. In addition, they all share homologies at the level of their Rep proteins. However, the bind regions of these plasmids are, in general, not conserved. We tested the substrate specificity of purified RepB of pLS1. The RepB protein has a temperature-dependent nicking-closing action on supercoiled pLS1, as well as on recombinant plasmid DNAs harboring the pLS1 nic region. The DNA strand transferase activity of pLS1-encoded RepB was also assayed on two plasmids of the pLS1 family, namely, pE194 and pFX2. DNAs from both plasmids were relaxed by RepB, provided they had a proper degree of supercoiling; i.e., it was necessary to modulate the supercoiling of pE194 DNA to achieve RepB-mediated DNA relaxation. Single-stranded oligonucleotides containing the nic regions of various plasmids belonging to the pLS1 family, including those of pE194 and pFX2, were substrates for RepB. In vitro, the RepB protein does not need to bind to the iterons for its nicking-closing activity.     

Molecular analysis of the replication region of the theta-replicating plasmid pUCL287 from Tetragenococcus ( Pediococcus ) halophilus ATCC33315

The complete nucleotide sequence of the 8.7-kb theta-replicating plasmid pUCL287 from Tetragenococcus halophilus (formerly Pediococcus halophilus) ATCC33315 has been determined. The replication region was identified and analyzed. Its nucleotide sequence contains an untranslated region, the replication origin, followed by two open reading frames (ORFs) encoding two proteins of 311 (RepA287) and 168 (RepB287) amino acids, respectively. Evidence is presented to show that RepA287 represents the plasmid replication protein. RepB287, which is non-essential for replication, is involved in the plasmid copy-number control and segregational stability. The roles of lactococcal proteins homologous to RepB287 have not been defined so far. Nevertheless, the structural organization of the pUCL287 replication region is remarkably similar to those of well known theta-replicating lactococcal plasmids despite the absence of homology of the replication origin and of the replication protein, and this suggests that pUCL287 uses the same mechanism of replication. Nucleotide sequence comparisons show that pSMB74, a pediococcal plasmid encoding bacteriocin production, is a member of the pUCL287 replicon family. Received: 22 May 1996 / Accepted: 11 April 1997     

Sequence-specific interactions between cellular DNA-binding proteins and the adenovirus origin of DNA replication.

The adenovirus origin of DNA replication contains three functionally distinct sequence domains (A, B, and C) that are essential for initiation of DNA synthesis. Previous studies have shown that domain B contains the recognition site for nuclear factor I (NF-I), a cellular protein that is required for optimal initiation. In the studies reported here, we used highly purified NF-I, prepared by DNA recognition site affinity chromatography (P. J. Rosenfeld and T. J. Kelly, Jr., J. Biol. Chem. 261:1398-1408, 1986), to investigate the cellular protein requirements for initiation of viral DNA replication. Our data demonstrate that while NF-I is essential for efficient initiation in vitro, other cellular factors are required as well. A fraction derived from HeLa cell nuclear extract (BR-FT fraction) was shown to contain all the additional cellular proteins required for the complete reconstitution of the initiation reaction. Analysis of this complementing fraction by a gel electrophoresis DNA-binding assay revealed the presence of two site-specific DNA-binding proteins, ORP-A and ORP-C, that recognized sequences in domains A and C, respectively, of the viral origin. Both proteins were purified by DNA recognition site affinity chromatography, and the boundaries of their binding sites were defined by DNase I footprint analysis. Additional characterization of the recognition sequences of ORP-A, NF-I, and ORP-C was accomplished by determining the affinity of the proteins for viral origins containing deletion and base substitution mutations. ORP-C recognized a sequence between nucleotides 41 and 51 of the adenovirus genome, and analysis of mutant origins indicated that efficient initiation of replication is dependent on the presence of a high-affinity ORP-C-binding site. The ORP-A recognition site was localized to the first 12 base pairs of the viral genome within the minimal origin of replication. These data provide evidence that the initiation of adenovirus DNA replication involves multiple protein-DNA interactions at the origin.     

The integration host factor of Escherichia coli binds to bent DNA at the origin of replication of the plasmid pSC101

The integration host factor (IHF) of Escherichia coli is necessary for maintenance of pSC101. The protein binds specifically to the replication origin of the plasmid, in the AT-rich region located immediately adjacent to the left, weak binding site for the plasmid-encoded initiator protein. DNAase I and OH- radical footprinting experiments showed that IHF protects 49 bp of the DNA at the origin region. Methylation protection analyses revealed that IHF contacts purine residues in both the major and minor grooves of the DNA. Electrophoretic analyses showed that IHF binds to bent DNA, and the protein binding further enhances the degree of DNA bending. Site-directed mutagenesis of three of the contact points not only abolished binding of the protein to the DNA but also inactivated the replication origin. Therefore, binding of IHF to the ori sequence most probably is necessary for initiation of plasmid replication.     

Minimal essential origin of plasmid pSC101 replication: requirement of a region downstream of iterons.

The minimal replication origin (ori) of the plasmid pSC101 was defined as an about 220-bp region under the condition that the Rep (or RepA) protein, a plasmid-encoded initiator protein, was supplied in trans. The DnaA box is located at one end of ori, as in other plasmids, like mini-F and P1. The other border is a strong binding site (IR-1) of Rep which is palindromic sequence and lies in an about 50-bp region beyond the repeated sequences (iterons) in ori. This IR-1 is located just upstream of another strong Rep binding site (IR-2), the operator site of the structure gene of Rep (rep), but its function has not been determined. The present study shows that the IR-1 sequence capable of binding to Rep is essential for plasmid replication with a nearly normal copy number. Furthermore, a region between the third iteron and IR-1 is also required in a sequence-specific fashion, since some one-base substitution in this region inactivate the origin function. It is likely that the region also is a recognition site of an unknown protein. Three copy number mutations of rep can suppress any one-base substitution mutation. On the other hand, the sequence of a spacer region between the second and the third iterons, which is similar to that of the downstream region of the third iteron, can be changed without loss of the origin function. The requirement of the region downstream of iterons in pSC101 seems to be unique among iteron-driven plasmid replicons.     

Distinct functions of the two specificity determinants in replication initiation of plasmids ColE2-P9 and ColE3-CA38

The plasmid ColE2-P9 Rep protein specifically binds to the cognate replication origin to initiate DNA replication. The replicons of the plasmids ColE2-P9 and ColE3-CA38 are closely related, although the actions of the Rep proteins on the origins are specific to the plasmids. The previous chimera analysis identified two regions, regions A and B, in the Rep proteins and two sites, alpha and beta, in the origins as specificity determinants and showed that when each component of the region A-site alpha pair and the region B-site beta pair is derived from the same plasmid, plasmid DNA replication is efficient. It is also indicated that the replication specificity is mainly determined by region A and site alpha. By using an electrophoretic mobility shift assay, we demonstrated that region B and site beta play a critical role for stable Rep protein-origin binding and, furthermore, that 284-Thr in this region of the ColE2 Rep protein and the corresponding 293-Trp of the ColE3 Rep protein mainly determine the Rep-origin binding specificity. On the other hand, region A and site alpha were involved in the efficient unwinding of several nucleotide residues around site alpha, although they were not involved in the stable binding of the Rep protein to the origin. Finally, we discussed how the action of the Rep protein on the origin involving these specificity determinants leads to the plasmid-specific replication initiation.     

DnaA protein binding to the plasmid origin region can substitute for primosome assembly during replication of pBR322 in vitro

We analyzed the significance of DnaA protein binding to the origin region of pBR322. Replication of pBR322 in vitro was stimulated by DnaA protein. Moreover, the primosomal component protein i was no longer essential for replication after addition of DnaA protein, whereas, among others, proteins DnaB and DnaG were still required. Complete replication products were synthesized under these conditions. We constructed pBR322 deletion derivatives missing the primosome assembly sites. Efficient replication of these deletion plasmids was dependent on the presence of DnaA protein and its binding site, but independent of protein i activity. We conclude that DnaA protein binding to the pBR322 origin region substitutes for primosome assembly by directing DnaB, DnaC, and DnaG proteins to the origin. We term this process DnaA-directed pre-replisome formation.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.