Refined crystal structure of the potato inhibitor complex of carboxypeptidase A at 2.5 Å resolution

The exopeptidase carboxypeptidase A forms a tight complex with a 39 residue inhibitor protein from potatoes. We have determined the crystal structure of this complex, and refined the atomic model to a crystallographic R-factor of 0.196 at 2.5 Å resolution. The structure of the inhibitor protein is organized around a core of disulfide bridges. No α-helices or β-sheets are present in this protein, although there is one turn of 3₁₀ helix. The four carboxy-terminal residues of the inhibitor protein bind in the active site groove of carboxypeptidase A, defining binding subsites S′₁, S₁, S₂ and S₃ on the enzyme. The carboxy-terminal glycine of the inhibitor is cleaved from the remainder of the inhibitor in the complex, and remains trapped in the back of the active site pocket. Interactions between the inhibitor and residues Tyr248 and Arg71 of carboxypeptidase A resemble possible features of binding stages for substrates both prior and subsequent to peptide bond hydrolysis. Not all of these interactions would be available to different types of ester substrates, however, which may be in part responsible for the observed kinetic differences in hydrolysis between peptides and various classes of esters. With the exception of residues involved in the binding of the inhibitor protein (such as Tyr248), the structure of carboxypeptidase A as determined in the inhibitor complex is quite similar to the structure of the unliganded enzyme (Lipscomb et al., 1968), which was solved from an unrelated crystal form.     

Crystal structure analysis of sea lamprey hemoglobin at 2 Å resolution

The crystal structure of the predominant hemoglobin component of blood from the sea lamprey, Petromyzon marinus, has been determined by X-ray diffraction analysis. Crystals for this analysis were grown from cyanide methemoglobin V as crystal type D₂. These crystals are in space group P2₁2₁2₁ and have unit cell dimensions of $\text{a = 44.57}\text{A}\text{?}\text{, b = 96.62}\text{A}\text{?}\text{and}\text{c = 31.34}\text{A}\text{?}$. Isomorphous heavyatom derivatives were prepared by soaking crystals in solutions of Hg(CN)₂, K₂Hg(CNS)₄ and KAu(CN)₂. Diffracted intensities to as far as 2 Å spacings were measured on a diffractometer. Phases were found by means of the isomorphous replacements and anomalous scattering, with supplementary information provided by the tangent formula. An atomic model was fitted to the final electron density map in a Richards optical comparator. The lamprey hemoglobin molecule is generally similar in structure to other globins, but differs in many details. Each molecule is in contact with ten neighboring molecules in the crystal lattice. The nature of the binding of the heavy atoms to lamprey hemoglobin has been interpreted.     

Crystal structure of a stress inducible protein from Mycoplasma pneumoniae at 2.85 Å resolution

Journal of Structural and Functional Genomics -     

Crystal structure of a hemojuvelin-binding fragment of neogenin at 1.8Å

Neogenin is a type I transmembrane glycoprotein with a large ectodomain containing tandem immunoglobulin-like and fibronectin type III (FNIII) domains. Closely related to the tumor suppressor gene DCC, neogenin functions in critical biological processes through binding to various ligands, including netrin, repulsive guidance molecules, and the iron regulatory protein hemojuvelin. We previously reported that neogenin binds to hemojuvelin through its membrane-proximal fifth and sixth FNIII domains (FN5-6), with domain 6 (FN6) contributing the majority of critical binding interactions. Here we present the crystal structure of FN5-6, the hemojuvelin-binding fragment of human neogenin, at 1.8?. The two FNIII domains are orientated nearly linearly, a domain arrangement most similar to that of a tandem FNIII-containing fragment within the cytoplasmic tail of the β4 integrin. By mapping surface-exposed residues that differ between neogenin FN5-6 and the comparable domains from DCC, which does not bind hemojuvelin, we identified a potential hemojuvelin-binding site on neogenin FN6. Neogenin FN5, which does not bind hemojuvelin in isolation, exhibits a highly electropositive surface, which may be involved in interactions with negatively-charged polysaccharides or phospholipids in the membrane bilayer. The neogenin FN5-6 structure can be used to facilitate a molecular understanding of neogenin's interaction with hemojuvelin to regulate iron homeostasis and with hemojuvelin-related repulsive guidance molecules to mediate axon guidance.     

Crystal structure of Escherichia coli manganese superoxide dismutase at 2.1-Å resolution

The three-dimensional structure of the manganese-dependent superoxide dismutase (MnSOD) from Escherichia coli has been determined by X-ray crystallography at 2.1?Å resolution. The protein crystallizes with two homodimers in the asymmetric unit, and a model comprising 6528 protein atoms (residues 1–205 of all four monomers), four manganese ions and 415 water molecules has been refined to an R factor of 0.188 (R _free 0.218). The structure shows a high degree of similarity with other MnSOD and FeSOD enzymes. The Mn centres are 5-coordinate, trigonal bipyramidal, with His26 and a solvent molecule, probably a hydroxide ion, as apical ligands, and His81, Asp167 and His171 as equatorial ligands. The coordinated solvent molecule is linked to a network of hydrogen bonds involving the non-coordinated carboxylate oxygen of Asp167 and a conserved glutamine residue, Gln146. The MnSOD dimer is notable for the way in which the two active sites are interconnected and a "bridge" comprising His171 of one monomer and Glu170 of the other offers a route for inter-site communication. Comparison of E. coli MnSOD and FeSOD (a) reveals some differences in the dimer interface, (b) yields no obvious explanation for their metal specificities, and (c) provides a structural basis for differences in DNA binding, where for MnSOD the groove formed by dimerization is complementary in charge and surface contour to B-DNA.     

Crystal structure of chicken liver basic fatty acid-binding protein at 2.7 Å resolution

The three-dimensional structure of chicken liver basic fatty acid-binding protein has been determined at 2.7 Å resolution by X-ray crystallography. Phases were calculated using the multiple isomorphous replacement procedure and a preliminary model was built. This model, with an initial R-factor of 0.57, was then improved by a cycle of refinement by simulated annealing which brought the R factor down to 0.32. The protein is structured as a compact 10-stranded--barrel which encapsulates a residual electron density that can be interpreted as a fatty acid molecule. The NH₂-terminus portion of the molecule contains two short -helices. The structure of this liver protein appears very similar to that of the Escherichia coli derived rat intestinal FABP recently determined by X-ray diffraction methods.     

Crystal structure of AcrB complexed with linezolid at 3.5 Å resolution

AcrB is an inner membrane resistance-nodulation-cell division efflux pump and is part of the AcrAB–TolC tripartite efflux system. We have determined the crystal structure of AcrB with bound Linezolid at a resolution of 3.5 Å. The structure shows that Linezolid binds to the A385/F386 loops of the symmetric trimer of AcrB. A conformational change of a loop in the bottom of the periplasmic cleft is also observed.     

Crystal structure of the C-terminal globular domain of oligosaccharyltransferase from Archaeoglobus fulgidus at 1.75 Å resolution

Protein N-glycosylation occurs in the three domains of life. Oligosaccharyltransferase (OST) transfers glycan to asparagine in the N-glycosylation sequon. The catalytic subunit of OST is called STT3 in eukaryotes, AglB in archaea, and PglB in eubacteria. The genome of a hyperthermophilic archaeon, Archaeoglobus fulgidus, encodes three AglB paralogs. Two of them are the shortest AglBs across all domains of life. We determined the crystal structure of the C-terminal globular domain of the smallest AglB to identify the minimal structural unit. The Archaeoglobus AglB lacked a β-barrel-like structure, which had been found in other AglB and PglB structures. In agreement, the deletion in a larger Pyrococcus AglB confirmed its dispensability for the activity. By contrast, the Archaeoglobus AglB contains a kinked helix bearing a conserved motif, called DK/MI motif. The lysine and isoleucine residues in the motif participate in the Ser/Thr recognition in the sequon. The Archaeoglobus AglB structure revealed that the kinked helix contained an unexpected insertion. A revised sequence alignment based on this finding identified a variant type of the DK motif with the insertion. A mutagenesis study of the Archaeoglobus AglB confirmed the contribution of this particular type of the DK motif to the activity. When taken together with our previous results, this study defined the classification of OST: one group consisting of eukaryotes and most archaea possesses the DK-type Ser/Thr pocket, and the other group consisting of eubacteria and the remaining archaea possesses the MI-type Ser/Thr pocket. This classification provides a useful framework for OST studies.     

Crystal structure of periplasmic catecholate-siderophore binding protein VctP from Vibrio cholerae at 1.7 Å resolution

VctP, one of the two essential siderophore-binding PBPs from the pathogen Vibrio cholerae, plays an important role in the transport of enterobactin and vibriobactin, which have quite different configurations of iron coordination, from the periplasm to the inner membrane. The current study reports the crystal structure of VctP from V. cholerae N16961 at 1.7 Å resolution. A structural comparison of VctP with its homologues and the results of molecular docking indicate that enterobactin and vibriobactin share the same binding pocket. Significantly, a basic triad consisting of Arg137, Arg226 and Arg270 is used to balance the three negative charges of ferric-enterobactin, while a basic dyad consisting of Arg137 and Arg270 is used to balance the two negative charges of ferric-vibriobactin.     

Crystal structure of the his-tagged saccharopine reductase from Saccharomyces cerevisiae at 1.7-Å resolution

The three-dimensional structure of the saccharopine reductase enzyme from the budding yeast Saccharomyces cerevisiae was determined to 1.7-A resolution in the apo form by using molecular replacement. The enzyme monomer consists of three domains: domain I is a variant of the Rossmann fold, domain II folds into a alpha/beta structure containing a mixed seven-stranded beta-sheet as the central core, and domain III has an all-helical fold. Comparative fold alignment with the enzyme from Magnaporthe grisea suggests that domain I binds to NADPH, and domain II binds to saccharopine and is involved in dimer formation. Domain III is involved in closing the active site of the enzyme once substrates are bound. Structural comparison of the saccharopine reductase enzymes from S. cerevisiae and M. grisea indicates that domain II has the highest number of conserved residues, suggesting that it plays an important role in substrate binding and in spatially orienting domains I and III.     

Crystal structure determination at 1.4 Å resolution of ferredoxin from the green alga Chlorella fusca

Background: [2Fe–2S] ferredoxins, also called plant-type ferredoxins, are low-potential redox proteins that are widely distributed in biological systems. In photosynthesis, the plant-type ferredoxins function as the central molecule for distributing electrons from the photolysis of water to a number of ferredox-independent enzymes, as well as to cyclic photophosphorylation electron transfer. This paper reports only the second structure of a [2Fe–2S] ferredoxin from a eukaryotic organism in its native form.Results: Ferredoxin from the green algae Chlorella fusca has been purified, characterised, crystallised and its structure determined to 1.4 Å resolution – the highest resolution structure published to date for a plant-type ferredoxin. The structure has the general features of the plant-type ferredoxins already described, with conformational differences corresponding to regions of higher mobility. Immunological data indicate that a serine residue within the protein is partially phosphorylated. A slightly electropositive shift in the measured redox potential value, -325 mV, is observed in comparison with other ferredoxins.Conclusions: This high-resolution structure provides a detailed picture of the hydrogen-bonding pattern around the [2Fe–2S] cluster of a plant-type ferredoxin; for the first time, it was possible to obtain reliable error estimates for the geometrical parameters. The presence of phosphoserine in the protein indicates a possible mechanism for the regulation of the distribution of reducing power from the photosynthetic electron-transfer chain.     

Structure of a triclinic ternary complex of horse liver alcohol dehydrogenase at 2.9 Å resolution

The structure of a triclinic complex between liver alcohol dehydrogenase, reduced coenzyme NADH, and the inhibitor dimethylsulfoxide has been determined to 2.9 Å resolution using isomorphous replacement methods. The heavy-atom positions were derived by molecular replacement methods using phase angles derived from a model of the orthorhombic apoenzyme structure previously determined to 2.4 Å resolution. A model of the present holoenzyme molecule was built on a Vector General 3400 display system using the RING system of programs. This model gave a crystallographic R-value of 37.9%.There are extensive conformational differences between the protein molecules in the two forms. The conformational change involves a rotation of 7.5 ° of the catalytic domains relative to the coenzyme binding domains. A hinge region for this rotation is defined within a hydrophobic core between two helices. The internal structures of the domains are preserved with the exception of a movement of a small loop in the coenzyme binding domain. A cleft between the domains is closed by this coenzyme-induced conformational change, making the active site less accessible from solution and thus more hydrophobic.The two crystallographically independent subunits are very similar and bind both coenzyme and inhibitor in an identical way within the present limits of error. The coenzyme molecule is bound in an extended conformation with the two ends in hydrophobic crevices on opposite sides of the central pleated sheet of the coenzyme binding domain. There are hydrogen bonds to oxygen atoms of the ribose moities from Asp223, Lys228 and His51. The pyrophosphate group is in contact with the side-chains of Arg47 and Arg369.No new residues are brought into the active site compared to the apoenzyme structure. The active site zinc atom is close to the hinge region, where the smallest structural changes occur. Small differences in the co-ordination geometry of the ligands Cys46, His67 and Cysl74 are not excluded and may account for the ordered mechanism. The oxygen atom of the inhibitor dimethylsulfoxide is bound directly to zinc confirming the structural basis for the suggested mechanism of action based on studies of the apoenzyme structure.     

Crystal structure of Turkey egg-white lysozyme: Results of the molecular replacement method at 5 Å resolution

Turkey egg-white lysozyme differs from hen egg-white lysozyme in its primary structure in 7 of the 129 residues. We have determined the rotational and translational parameters relating the known co-ordinates of hen egg-white lysozyme molecule to the turkey lysozyme. The rotational parameters were determined using the rotation function, the translational parameters were determined by placing the properly rotated molecule systematically at all positions within the unit cell and searching for those positions producing few intermolecular contacts between the α-carbon atoms of one molecule and all its neighbors. These parameters were refined by minimizing the conventional R factor between observed and calculated structure amplitudes. The final rotational and translational parameters give an R value of 46.7% for reflections with d spacings between 6 Å and 12 Å and have 7 intermolecular contacts closer than 5 Å between the a carbon atoms of one molecule and all its neighbors. An electron density map has been calculated at 5 Å resolution; the packing of the molecules in this form appears to present the entire length of the active cleft in the vicinity of the crystallographic 6-fold axis and does not appear to be blocked by neighboring molecules.     

Crystal and molecular structure of the sulfhydryl protease calotropin DI at 3·2 Å resolution

The three-dimensional structure of the sulfhydryl protease calotropin DI from the madar plant, Calotropis gigantea, has been determined at 3·2 Å resolution using the multiple isomorphous replacement method with five heavy atom derivatives. A Fourier synthesis based on protein phases with a mean figure of merit of 0·857 was used for model building. The polypeptide backbone of calotropin DI is folded to form two distinct lobes, one of which is comprised mainly of α-helices, while the other is characterized by a system of all antiparallel pleated sheets. The overall molecular architecture closely resembles those found in the sulfhydryl proteases papain and actinidin.Despite the unknown amino acid sequence of calotropin DI a number of residues around its active center could be identified. These amino acid side-chains were found in a similar arrangement as the corresponding ones in papain and actinidin. The polypeptide chain between residues 1 and 18 of calotropin DI folds in a unique manner, providing a possible explanation for the unusual inability of calotropin DI to hydrolyze those synthetic substrates that papain and actinidin act upon.     

Improving the accuracy of macromolecular structure refinement at 7 Å resolution

1. Download : Download high-res image (217KB)
2. Download : Download full-size image

Highlights? Improved models by DEN refinement at 7 Å ? Best method is DEN refinement with initial segmented rigid-body refinement ? R_free has predictive power at 7 Å     

Crystal structure of the sweet-tasting protein thaumatin II at 1.27Å

Thaumatin, an intensely sweet-tasting protein, elicits a sweet taste sensation at 50 nM. Here the X-ray crystallographic structure of one of its variants, thaumatin II, was determined at a resolution of 1.27 ?. Overall structure of thaumatin II is similar to thaumatin I, but a slight shift of the Cα atom of G96 in thaumatin II was observed. Furthermore, the side chain of residue 67 in thaumatin II is highly disordered. Since residue 67 is one of two residues critical to the sweetness of thaumatin, the present results suggested that the critical positive charges at positions 67 and 82 are disordered and the flexibility and fluctuation of these side chains would be suitable for interaction of thaumatin molecules with sweet receptors.