Quantitative trait loci affecting delta13C and response to differential water availibility in Arabidopsis thaliana

Phenotypic plasticity is an important response mechanism of plants to environmental heterogeneity. Here, we explored the genetic basis of plastic responses of Arabidopsis thaliana to water deficit by experimentally mapping quantitative trait loci (QTL) in two recombinant inbred populations (Cvi x Ler and Ler x Col). We detected genetic variation and significant genotype-by-environment interactions for many traits related to water use. We also mapped 26 QTL, including six for carbon isotope composition (delta13C). Negative genetic correlations between fruit length and fruit production as well as between flowering time and branch production were corroborated by QTL colocalization, suggesting these correlations are due to pleiotropy or physical linkage. Water-limited plants were more apically dominant with greater root:shoot ratios and higher delta13C (higher water-use efficiency) when compared to well-watered plants. Many of the QTL effects for these traits interacted significantly with the irrigation treatment, suggesting that the observed phenotypic plasticity is genetically based. We specifically searched for epistatic (QTL-QTL) interactions using a two-dimensional genome scan, which allowed us to detect epistasis regardless of additive genetic effects. We found several significant QTL-QTL interactions including three that exhibited environmental dependence. These results provide preliminary evidence for proposed genetic mechanisms underlying phenotypic plasticity.     

Mapping phenotypic plasticity and genotype-environment interactions affecting life-history traits in Caenorhabditis elegans

Phenotypic plasticity and genotype-environment interactions (GEI) play an important role in the evolution of life histories. Knowledge of the molecular genetic basis of plasticity and GEI provides insight into the underlying mechanisms of life-history changes in different environments. We used a genomewide single-nucleotide polymorphism map in a recombinant N2 x CB4856 inbred panel of the nematode Caenorhabditis elegans to study the genetic control of phenotypic plasticity to temperature in four fitness-related traits, that is, age at maturity, fertility, egg size and growth rate. We mapped quantitative trait loci (QTL) for the respective traits at 12 and 24 degrees C, as well as their plasticities. We found genetic variation and GEI for age at maturity, fertility, egg size and growth rate. GEI in fertility and egg size was attributed to changes in rank order of reaction norms. In case of age at maturity and growth rate, GEI was caused mainly by differences in the among-line variance. In total, 11 QTLs were detected, five QTL at 12 degrees C and six QTL at 24 degrees C, which were associated with life-history traits. Five QTL associated with age at maturity, fertility and growth rate showed QTL x environment interaction. These colocalized with plasticity QTL for the respective traits suggesting allelic sensitivity to temperature. Further fine mapping, complementation analyses and gene silencing are planned to identify candidate genes underlying phenotypic plasticity for age at maturity, fertility and growth.     

Identification of plant quantitative trait Loci modulating a rhizobacteria-aphid indirect effect

Plants simultaneously interact with a plethora of species both belowground and aboveground, which can result in indirect effects mediated by plants. Studies incorporating plant genetic variation indicate that indirect effects mediated by plants may be a significant factor influencing the ecology and evolution of species within a community. Here, we present findings of a Quantitative Trait Locus (QTL) mapping study, where we mapped a rhizobacteria-aphid indirect effect onto the barley genome. We measured the size of aphid populations on barley when the barley rhizosphere either was or was not supplemented with a rhizobacterial species. Using a QTL mapping subset, we located five regions of the barley genome associated with the rhizobacteria-aphid indirect effect. Rhizobacterial supplementation led to an increase in aphid population size (mapped to three barley QTL), or a decrease in aphid population size (mapped to two barley QTL). One QTL associated with plant resistance to aphids was affected by a significant QTL-by-environment interaction, because it was not expressed when rhizobacteria was supplemented. Our results indicated that rhizobacterial supplementation of barley roots led to either increased or reduced aphid population size depending on plant genotype at five barley QTL. This indicates that the direction of a rhizobacteria-aphid indirect effect could influence the selection pressure on plants, when considering species that affect plant fitness. Further research may build on the findings presented here, to identify genes within QTL regions that are involved in the indirect interaction.     

A statistical model for testing the pleiotropic control of phenotypic plasticity for a count trait

The differences of a phenotypic trait produced by a genotype in response to changes in the environment are referred to as phenotypic plasticity. Despite its importance in the maintenance of genetic diversity via genotype-by-environment interactions, little is known about the detailed genetic architecture of this phenomenon, thus limiting our ability to predict the pattern and process of microevolutionary responses to changing environments. In this article, we develop a statistical model for mapping quantitative trait loci (QTL) that control the phenotypic plasticity of a complex trait through differentiated expressions of pleiotropic QTL in different environments. In particular, our model focuses on count traits that represent an important aspect of biological systems, controlled by a network of multiple genes and environmental factors. The model was derived within a multivariate mixture model framework in which QTL genotype-specific mixture components are modeled by a multivariate Poisson distribution for a count trait expressed in multiple clonal replicates. A two-stage hierarchic EM algorithm is implemented to obtain the maximum-likelihood estimates of the Poisson parameters that specify environment-specific genetic effects of a QTL and residual errors. By approximating the number of sylleptic branches on the main stems of poplar hybrids by a Poisson distribution, the new model was applied to map QTL that contribute to the phenotypic plasticity of a count trait. The statistical behavior of the model and its utilization were investigated through simulation studies that mimic the poplar example used. This model will provide insights into how genomes and environments interact to determine the phenotypes of complex count traits.     

Genome-wide association mapping of Fusarium head blight resistance in contemporary barley breeding germplasm

Utilization of quantitative trait loci (QTL) identified in bi-parental mapping populations has had limited success for improving complex quantitative traits with low to moderate heritability. Association mapping in contemporary breeding germplasm may lead to more effective marker strategies for crop improvement. To test this approach, we conducted association mapping of two complex traits with moderate heritability; Fusarium head blight (FHB) severity and the grain concentration of mycotoxin associated with disease, deoxynivalenol (DON). To map FHB resistance in barley, 768 breeding lines were evaluated in 2006 and 2007 in four locations. All lines were genotyped with 1,536 SNP markers and QTL were mapped using a mixed model that accounts for relatedness among lines. Average linkage disequilibrium within the breeding germplasm extended beyond 4 cM. Four QTL were identified for FHB severity and eight QTL were identified for the DON concentration in two independent sets of breeding lines. The QTL effects were small, explaining 1–3% of the phenotypic variation, as might be expected for complex polygenic traits. We show that using breeding germplasm to map QTL can complement bi-parental mapping studies by providing independent validation, mapping QTL with more precision, resolving questions of linkage and pleiotropy, and identifying genetic markers that can be applied immediately in crop improvement.     

Genetic architecture of a selection response in Arabidopsis thaliana

Quantitative trait locus (QTL) mapping has become an established and effective method for studying the genetic architecture of complex traits. In this report, we use a QTL mapping approach in combination with data from a large selection experiment in Arabidopsis thaliana to explore a response to selection of experimental populations with differentiated genetic backgrounds. Experimental populations with genetic backgrounds derived from ecotypes Landsberg and Niederzenz were exposed to multiple generations of fertility and viability selection. This selection resulted in phenotypic shifts in a number of life-history and fitness-related characters including early development time, flowering time, dry biomass, longevity, and fruit production. Quantitative trait loci were mapped for these traits and their positions were compared to previously characterized allele frequency changes in the experimental populations (Ungerer et al. 2003). Quantitative trait locus positions largely colocalized with genomic regions under strong and consistent selection in populations with differentiated genetic backgrounds, suggesting that alleles for these traits were selected similarly in differentiated genetic backgrounds. However, one QTL region exhibited a more variable response; being positively selected on one genetic background but apparently neutral in another. This study demonstrates how QTL mapping approaches can be combined with map-based population genetic data to study how selection acts on standing genetic variation in populations.     

Habitat-specific natural selection at a flowering-time QTL is a main driver of local adaptation in two wild barley populations

Understanding the genetic basis of local adaptation requires insight in the fitness effects of individual loci under natural field conditions. While rapid progress is made in the search for genes that control differences between plant populations, it is typically unknown whether the genes under study are in fact key targets of habitat-specific natural selection. Using a quantitative trait loci (QTL) approach, we show that a QTL associated with flowering-time variation between two locally adapted wild barley populations is an important determinant of fitness in one, but not in the other population's native habitat. The QTL mapped to the same position as a habitat-specific QTL for field fitness that affected plant reproductive output in only one of the parental habitats, indicating that the genomic region is under differential selection between the native habitats. Consistent with the QTL results, phenotypic selection of flowering time differed between the two environments, whereas other traits (growth rate and seed weight) were under selection but experienced no habitat-specific differential selection. This implies the flowering-time QTL as a driver of adaptive population divergence. Our results from phenotypic selection and QTL analysis are consistent with local adaptation without genetic trade-offs in performance across environments, i.e. without alleles or traits having opposing fitness effects in contrasting environments.     

Mapping of quantitative trait loci controlling adaptive traits in coastal Douglas fir. III. Quantitative trait loci-by-environment interactions

Quantitative trait loci (QTL) were mapped in the woody perennial Douglas fir (Pseudotsuga menziesii var. menziesii [Mirb.] Franco) for complex traits controlling the timing of growth initiation and growth cessation. QTL were estimated under controlled environmental conditions to identify QTL interactions with photoperiod, moisture stress, winter chilling, and spring temperatures. A three-generation mapping population of 460 cloned progeny was used for genetic mapping and phenotypic evaluations. An all-marker interval mapping method was used for scanning the genome for the presence of QTL and single-factor ANOVA was used for estimating QTL-by-environment interactions. A modest number of QTL were detected per trait, with individual QTL explaining up to 9.5% of the phenotypic variation. Two QTL-by-treatment interactions were found for growth initiation, whereas several QTL-by-treatment interactions were detected among growth cessation traits. This is the first report of QTL interactions with specific environmental signals in forest trees and will assist in the identification of candidate genes controlling these important adaptive traits in perennial plants.     

Mapping determinants of variation in energy metabolism, respiration and flight in Drosophila

We employed quantitative trait locus (QTL) mapping to dissect the genetic architecture of a hierarchy of functionally related physiological traits, including metabolic enzyme activity, metabolite storage, metabolic rate, and free-flight performance in recombinant inbred lines of Drosophila melanogaster. We identified QTL underlying variation in glycogen synthase, hexokinase, phosphoglucomutase, and trehalase activity. In each case variation mapped away from the enzyme-encoding loci, indicating that trans-acting regions of the genome are important sources of variation within the metabolic network. Individual QTL associated with variation in metabolic rate and flight performance explained between 9 and 35% of the phenotypic variance. Bayesian QTL analysis identified epistatic effects underlying variation in flight velocity, metabolic rate, glycogen content, and several metabolic enzyme activities. A region on the third chromosome was associated with expression of the glucose-6-phosphate branchpoint enzymes and with metabolic rate and flight performance. These genomic regions are of special interest as they may coordinately regulate components of energy metabolism with effects on whole-organism physiological performance. The complex biochemical network is encoded by an equally complex network of interacting genetic elements with potentially pleiotropic effects. This has important consequences for the evolution of performance traits that depend upon these metabolic networks.     

np2QTL: networking phenotypic plasticity quantitative trait loci across heterogeneous environments

Despite its critical importance to our understanding of plant growth and adaptation, the question of how environment‐induced plastic response is affected genetically remains elusive. Previous studies have shown that the reaction norm of an organism across environmental index obeys the allometrical scaling law of part‐whole relationships. The implementation of this phenomenon into functional mapping can characterize how quantitative trait loci (QTLs) modulate the phenotypic plasticity of complex traits to heterogeneous environments. Here, we assemble functional mapping and allometry theory through Lokta?Volterra ordinary differential equations (LVODE) into an R‐based computing platform, np²QTL, aimed to map and visualize phenotypic plasticity QTLs. Based on LVODE parameters, np²QTL constructs a bidirectional, signed and weighted network of QTL?QTL epistasis, whose emergent properties reflect the ecological mechanisms for genotype?environment interactions over any range of environmental change. The utility of np²QTL was validated by comprehending the genetic architecture of phenotypic plasticity via the reanalysis of published plant height data involving 3502 recombinant inbred lines of maize planted in multiple discrete environments. np²QTL also provides a tool for constructing a predictive model of phenotypic responses in extreme environments relative to the median environment.     

Genetics of phenotypic plasticity: QTL analysis in barley, Hordeum vulgare

Phenotypic plasticity is the variation in phenotypic traits produced by a genotype in different environments. In contrast, environmental canalization is defined as the insensitivity of a genotype's phenotype to variation in environments. Despite the extensive literature on the evolutionary significance and potential genetic mechanisms driving plasticity and canalization, few studies tried to unravel the genetic basis of this phenomenon. Using both simulations and real data from barley (Hordeum vulgare), we used QTL mapping to obtain insights into the genetics of phenotypic plasticity. We explored two ways of quantifying phenotypic plasticity, namely the phenotypic variance across environments and the Finlay-Wilkinson's regression slope. Each relates to a different concept of stability. Through QTL detection with real and simulated data, we show that each measure of plasticity detects specific types of plasticity QTL. Most of the plasticity QTLs were detected in the data set with the lowest number of environments. All plasticity QTL co-located with loci showing QTL x E interaction and there were no QTL that only affected plasticity. The number of environments that are considered and their homogeneity is a key to interpret the genetic control of phenotypic plasticity. Regulatory pathways of plasticity may vary from one set of environments to another due to unique features of each environment. Therefore, with an increasing number of environments, it may become impossible to detect a single 'consistent' regulatory pathway for all environments.     

Quantitative trait loci controlling agronomic and biochemical traits in Cannabis sativa

Understanding the genetic basis of complex traits is a fundamental goal of evolutionary genetics. Yet, the genetics controlling complex traits in many important species such as hemp (Cannabis sativa) remain poorly investigated. Because hemp’s change in legal status with the 2014 and 2018 U.S. Federal Farm Bills, interest in the genetics controlling its numerous agriculturally important traits has steadily increased. To better understand the genetics of agriculturally important traits in hemp, we developed an F₂ population by crossing two phenotypically distinct hemp cultivars (Carmagnola and USO31). Using whole-genome sequencing, we mapped quantitative trait loci (QTL) associated with variation in numerous agronomic and biochemical traits. A total of 69 loci associated with agronomic (34) and biochemical (35) trait variation were identified. We found that most QTL co-localized, suggesting that the phenotypic distinctions between Carmagnola and USO31 are largely controlled by a small number of loci. We identified TINY and olivetol synthase as candidate genes underlying co-localized QTL clusters for agronomic and biochemical traits, respectively. We functionally validated the olivetol synthase candidate by expressing the alleles in yeast. Gas chromatography-mass spectrometry assays of extracts from these yeast colonies suggest that the USO31 olivetol synthase is functionally less active and potentially explains why USO31 produces lower cannabinoids compared to Carmagnola. Overall, our results help modernize the genomic understanding of complex traits in hemp.     

Two reproductive traits show contrasting genetic architectures in Plantago lanceolata

In many species, temperature‐sensitive phenotypic plasticity (i.e., an individual's phenotypic response to temperature) displays a positive correlation with latitude, a pattern presumed to reflect local adaptation. This geographical pattern raises two general questions: (a) Do a few large‐effect genes contribute to latitudinal variation in a trait? (b) Is the thermal plasticity of different traits regulated pleiotropically? To address the questions, we crossed individuals of Plantago lanceolata derived from northern and southern European populations. Individuals naturally exhibited high and low thermal plasticity in floral reflectance and flowering time. We grew parents and offspring in controlled cool‐ and warm‐temperature environments, mimicking what plants would encounter in nature. We obtained genetic markers via genotype‐by‐sequencing, produced the first recombination map for this ecologically important nonmodel species, and performed quantitative trait locus (QTL) mapping of thermal plasticity and single‐environment values for both traits. We identified a large‐effect QTL that largely explained the reflectance plasticity differences between northern and southern populations. We identified multiple smaller‐effect QTLs affecting aspects of flowering time, one of which affected flowering time plasticity. The results indicate that the genetic architecture of thermal plasticity in flowering is more complex than for reflectance. One flowering time QTL showed strong cytonuclear interactions under cool temperatures. Reflectance and flowering plasticity QTLs did not colocalize, suggesting little pleiotropic genetic control and freedom for independent trait evolution. Such genetic information about the architecture of plasticity is environmentally important because it informs us about the potential for plasticity to offset negative effects of climate change.     

Genetic control of soybean seed isoflavone content: importance of statistical model and epistasis in complex traits

A major objective for geneticists is to decipher genetic architecture of traits associated with agronomic importance. However, a majority of such traits are complex, and their genetic dissection has been traditionally hampered not only by the number of minor-effect quantitative trait loci (QTL) but also by genome-wide interacting loci with little or no individual effect. Soybean (Glycine max [L.] Merr.) seed isoflavonoids display a broad range of variation, even in genetically stabilized lines that grow in a fixed environment, because their synthesis and accumulation are affected by many biotic and abiotic factors. Due to this complexity, isoflavone QTL mapping has often produced conflicting results especially with variable growing conditions. Herein, we comparatively mapped soybean seed isoflavones genistein, daidzein, and glycitein by using several of the most commonly used mapping approaches: interval mapping, composite interval mapping, multiple interval mapping and a mixed-model based composite interval mapping. In total, 26 QTLs, including many novel regions, were found bearing additive main effects in a population of RILs derived from the cross between Essex and PI 437654. Our comparative approach demonstrates that statistical mapping methodologies are crucial for QTL discovery in complex traits. Despite a previous understanding of the influence of additive QTL on isoflavone production, the role of epistasis is not well established. Results indicate that epistasis, although largely dependent on the environment, is a very important genetic component underlying seed isoflavone content, and suggest epistasis as a key factor causing the observed phenotypic variability of these traits in diverse environments.     

Genetic mapping of quantitative phenotypic traits in Saccharomyces cerevisiae

Saccharomyces cerevisiae has become a favorite production organism in industrial biotechnology presenting new challenges to yeast engineers in terms of introducing advantageous traits such as stress tolerances. Exploring subspecies diversity of S. cerevisiae has identified strains that bear industrially relevant phenotypic traits. Provided that the genetic basis of such phenotypic traits can be identified inverse engineering allows the targeted modification of production strains. Most phenotypic traits of interest in S. cerevisiae strains are quantitative, meaning that they are controlled by multiple genetic loci referred to as quantitative trait loci (QTL). A straightforward approach to identify the genetic basis of quantitative traits is QTL mapping which aims at the allocation of the genetic determinants to regions in the genome. The application of high-density oligonucleotide arrays and whole-genome re-sequencing to detect genetic variations between strains has facilitated the detection of large numbers of molecular markers thus allowing high-resolution QTL mapping over the entire genome. This review focuses on the basic principle and state of the art of QTL mapping in S. cerevisiae. Furthermore we discuss several approaches developed during the last decade that allow down-scaling of the regions identified by QTL mapping to the gene level. We also emphasize the particular challenges of QTL mapping in nonlaboratory strains of S. cerevisiae.     

远交群体动态性状基因定位的似然分析Ⅰ.理论方法

受动物遗传育种中用来估计动态性状育种值的随机回归测定日模型思想的启发 ,将关于时间 (测定日期 )的Legendre多项式镶嵌在遗传模型的每个遗传效应中 ,以刻画QTL对动态性状变化过程的作用 ,从而建立起动态性状基因定位的数学模型。利用远交设计群体 ,阐述了动态性状基因定位的似然分析原理 ,推导了定位参数似然估计的EM法两步求解过程。结合动态性状遗传分析的特点和普通数量性状基因定位研究进展 ,还提出了有关动态性状基因定位进一步研究的设想     

Effectiveness of selective genotyping for detection of quantitative trait loci: an analysis of grain and malt quality traits in three barley populations.

Marker genotype data and grain and malt quality phenotype data from three barley (Hordeum vulgare L.) mapping populations were used to investigate the feasibility of selective genotyping for detection of quantitative trait loci (QTLs). With selective genotyping, only individuals with high and low phenotypic values for the trait of interest are genotyped. Here, genotyping of 10 to 70% of each population (i.e., 5 to 35% in each tail of the phenotypic distribution) was considered. Genomic positions detected by selective genotyping were compared to QTL position estimates from interval mapping analysis using marker genotype data from the entire population. Selective genotyping reliably detected almost all of the mapped QTLs, often with only 10% of the population genotyped. Selective genotyping also detected spurious QTLs in regions of the genome where no significant QTL had been mapped. Even with additional genotyping to verify putative QTLs, the total genotyping effort for detection of QTLs for a single trait by selective genotyping was usually less than 30% of that required for conventional interval mapping. Simultaneous investigation of two or more traits by selective genotyping would require additional genotyping effort, but could still be worthwhile.     

Co-localisation of host plant resistance QTLs affecting the performance and feeding behaviour of the aphid Myzus persicae in the peach tree

The architecture and action of quantitative trait loci (QTL) contributing to plant resistance mechanisms against aphids, the largest group of phloem-feeding insects, are not well understood. Comparative mapping of several components of resistance to the green peach aphid (Myzus persicae) was undertaken in Prunus davidiana, a wild species related to peach. An interspecific F(1) population of Prunus persica var. Summergrand × P. davidiana clone P1908 was scored for resistance (aphid colony development and foliar damage) and 17 aphid feeding behaviour traits monitored by means of the electrical penetration graph technique. Seven resistance QTLs were detected, individually explaining 6.1-43.1% of the phenotypic variation. Consistency was shown over several trials. Nine QTLs affecting aphid feeding behaviour were identified. All resistance QTLs except one co-located with QTLs underlying aphid feeding behaviour. A P. davidiana resistance allele at the major QTL was associated with drastic reductions in phloem sap ingestion by aphids, suggesting a phloem-based resistance mechanism. Resistance was also positively correlated with aphid salivation into sieve elements, suggesting an insect response to restore the appropriate conditions for ingestion after phloem occlusion. No significant QTL was found for traits characterising aphid mouthpart activity in plant tissues other than phloem vessels. Two QTLs with effects on aphid feeding behaviour but without effect on resistance were identified. SSR markers linked to the main QTLs involved in resistance are of potential use in marker-assisted selection for aphid resistance. Linking our results with the recent sequencing of the peach genome may help clarify the physiological resistance mechanisms.     

Mapping QTL for grain yield and other agronomic traits in post-rainy sorghum [Sorghum bicolor (L.) Moench]

Sorghum, a cereal of economic importance ensures food and fodder security for millions of rural families in the semi-arid tropics. The objective of the present study was to identify and validate quantitative trait loci (QTL) for grain yield and other agronomic traits using replicated phenotypic data sets from three post-rainy dry sorghum crop seasons involving a mapping population with 245 F₉ recombinant inbred lines derived from a cross of M35-1 × B35. A genetic linkage map was constructed with 237 markers consisting of 174 genomic, 60 genic and 3 morphological markers. The QTL analysis for 11 traits following composite interval mapping identified 91 QTL with 5–12 QTL for each trait. QTL detected in the population individually explained phenotypic variation between 2.5 and 30.3 % for a given trait and six major genomic regions with QTL effect on multiple traits were identified. Stable QTL across seasons were identified. Of the 60 genic markers mapped, 21 were found at QTL peak or tightly linked with QTL. A gene-based marker XnhsbSFCILP67 (Sb03g028240) on SBI-03, encoding indole-3-acetic acid-amido synthetase GH3.5, was found to be involved in QTL for seven traits. The QTL-linked markers identified for 11 agronomic traits may assist in fine mapping, map-based gene isolation and also for improving post-rainy sorghum through marker-assisted breeding.     

The genetic architecture of Drosophila sensory bristle number

We have mapped quantitative trait loci (QTL) for Drosophila mechanosensory bristle number in six recombinant isogenic line (RIL) mapping populations, each of which was derived from an isogenic chromosome extracted from a line selected for high or low, sternopleural or abdominal bristle number and an isogenic wild-type chromosome. All RILs were evaluated as male and female F(1) progeny of crosses to both the selected and the wild-type parental chromosomes at three developmental temperatures (18 degrees, 25 degrees, and 28 degrees ). QTL for bristle number were mapped separately for each chromosome, trait, and environment by linkage to roo transposable element marker loci, using composite interval mapping. A total of 53 QTL were detected, of which 33 affected sternopleural bristle number, 31 affected abdominal bristle number, and 11 affected both traits. The effects of most QTL were conditional on sex (27%), temperature (14%), or both sex and temperature (30%). Epistatic interactions between QTL were also common. While many QTL mapped to the same location as candidate bristle development loci, several QTL regions did not encompass obvious candidate genes. These features are germane to evolutionary models for the maintenance of genetic variation for quantitative traits, but complicate efforts to understand the molecular genetic basis of variation for complex traits.