Structural analysis of a mutant of the HIV-1 integrase zinc finger domain that forms a single conformation

HIV-1 integrase consists of three functional domains, an N-terminal zinc finger domain, a catalytic core domain and a C-terminal DNA binding domain. NMR analysis of an isolated N-terminal domain (IN(1-55)) has shown that IN(1-55) exists in two conformational states [E and D forms; Cai et al. (1997) Nat. Struct. Biol. 4, 567-577]. The two forms differ in the coordination of the zinc ion by two histidine residues. In the present study, structural analysis of a mutant of IN(1-55), Y15A, by NMR spectroscopy indicated that the mutant protein folds correctly but takes only the E form. Since the Y15A mutation abrogates the HIV-1 infectivity, Y15 might have some important role in the full-length integrase activity during the virus infection cycle. Our results suggest a possible role of Y15 in structural transition between the E and D forms of HIV-1 integrase to allow the optimal tetramerization.     

Structural implications of spectroscopic characterization of a putative zinc finger peptide from HIV-1 integrase.

The N-terminal domain of human immunodeficiency virus (HIV-1) integrase (IN) contains the sequence motif His-Xaa3-His-Xaa23-Cys-Xaa2-Cys, which is strongly conserved in all retroviral and retrotransposon IN proteins. This structural motif constitutes a putative zinc finger in which a metal ion may be coordinately bound by the His and Cys residues. A recombinant peptide, IN(1-55), composed of the N-terminal 55 amino acids of HIV-1 IN was expressed in Escherichia coli and purified. Utilizing a combination of techniques including UV-visible absorption, circular dichroism, Fourier transform infrared, and fluorescence spectroscopies, we have demonstrated that metal ions (Zn2+, Co2+, and Cd2+) are bound with equimolar stoichiometry by IN(1-55). The liganded peptide assumes a highly ordered structure with increased alpha-helical content and exhibits remarkable thermal stability. UV-visible difference spectra of the peptide-Co2+ complexes directly implicate thiols in metal coordination, and Co2+ d-d transitions in the visible range indicate that Co2+ is tetrahedrally coordinated. Mutant peptides containing conservative substitutions of one of the conserved His or either of the Cys residues displayed no significant Zn(2+)-induced conformational changes as monitored by CD and fluorescence spectra. We conclude that the N terminus of HIV-1 IN contains a metal-binding domain whose structure is stabilized by tetrahedral coordination of metal by histidines 12 and 16 and cysteines 40 and 43. A preliminary structural model for this zinc finger is presented.     

Structure of a two-domain fragment of HIV-1 integrase: implications for domain organization in the intact protein.

Retroviral integrase, an essential enzyme for replication of human immunodeficiency virus type-1 (HIV-1) and other retroviruses, contains three structurally distinct domains, an N-terminal domain, the catalytic core and a C-terminal domain. To elucidate their spatial arrangement, we have solved the structure of a fragment of HIV-1 integrase comprising the N-terminal and catalytic core domains. This structure reveals a dimer interface between the N-terminal domains different from that observed for the isolated domain. It also complements the previously determined structure of the C-terminal two domains of HIV-1 integrase; superposition of the conserved catalytic core of the two structures results in a plausible full-length integrase dimer. Furthermore, an integrase tetramer formed by crystal lattice contacts bears structural resemblance to a related bacterial transposase, Tn5, and exhibits positively charged channels suitable for DNA binding.     

Characterization of the minimal DNA-binding domain of the HIV integrase protein.

The human immunodeficiency virus (HIV) integrase (IN) protein mediates an essential step in the retroviral lifecycle, the integration of viral DNA into human DNA. A DNA-binding domain of HIV IN has previously been identified in the C-terminal part of the protein. We tested truncated proteins of the C-terminal region of HIV-1 IN for DNA binding activity in two different assays: UV-crosslinking and southwestern blot analysis. We found that a polypeptide fragment of 50 amino acids (IN220-270) is sufficient for DNA binding. In contrast to full-length IN protein, this domain is soluble under low salt conditions. DNA binding of IN220-270 to both viral DNA and non-specific DNA occurs in an ion-independent fashion. Point mutations were introduced in 10 different amino acid residues of the DNA-binding domain of HIV-2 IN. Mutation of basic amino acid K264 results in strong reduction of DNA binding and of integrase activity.     

Characterization of a DNA binding domain in the C-terminus of HIV-1 integrase by deletion mutagenesis.

The integrase (IN) protein of human immunodeficiency virus type 1 (HIV-1) catalyzes site-specific cleavage of 2 bases from the viral long terminal repeat (LTR) sequence yet it binds DNA with little DNA sequence specificity. We have previously demonstrated that the C-terminal half of IN (amino acids 154-288) possesses a DNA binding domain. In order to further characterize this region, a series of clones expressing truncated forms of IN as N-terminal fusion proteins in E.coli were constructed and analyzed by Southwestern blotting. Proteins containing amino acids 1-263, 1-248 and 170-288 retained the ability to bind DNA, whereas a protein containing amino acids 1-180 showed no detectable DNA binding. This defines a DNA binding domain contained within amino acids 180-248. This region contains an arrangement of 9 lysine and arginine residues each separated by 2-4 amino acids (KxxxKxxxKxxxxRxxxRxxRxxxxKxxxKxxxK), spanning amino acids 211-244, which is conserved in all HIV-1 isolates. A clone expressing full-length IN with a C-terminal fusion of 16 amino acids was able to bind DNA comparably to a cloned protein with a free C-terminus, and an IN-specific monoclonal antibody which recognizes an epitope contained within amino acids 264-279 was unable to block DNA binding, supporting the evidence that a region necessary for binding lies upstream of amino acid 264.     

Structure-Based Mutational Analysis of the C-Terminal DNA-Binding Domain of Human Immunodeficiency Virus Type 1 Integrase: Critical Residues for Protein Oligomerization and DNA Binding

The C-terminal domain of human immunodeficiency virus type 1 (HIV-1) integrase (IN) is a dimer that binds to DNA in a nonspecific manner. The structure of the minimal region required for DNA binding (IN_220–270) has been solved by nuclear magnetic resonance spectroscopy. The overall fold of the C-terminal domain of HIV-1 IN is similar to those of Src homology region 3 domains. Based on the structure of IN_220–270, we studied the role of 15 amino acid residues potentially involved in DNA binding and oligomerization by mutational analysis. We found that two amino acid residues, arginine 262 and leucine 234, contribute to DNA binding in the context of IN_220–270, as indicated by protein-DNA UV cross-link analysis. We also analyzed mutant proteins representing portions of the full-length IN protein. Amino acid substitution of residues located in the hydrophobic dimer interface, such as L241A and L242A, results in the loss of oligomerization of IN; consequently, the levels of 3′ processing, DNA strand transfer, and intramolecular disintegration are strongly reduced. These results suggest that dimerization of the C-terminal domain of IN is important for correct multimerization of IN.     

Structure of the discoidin domain receptor 1 extracellular region bound to an inhibitory Fab fragment reveals features important for signaling

The discoidin domain receptors, DDR1 and DDR2, are constitutively dimeric receptor tyrosine kinases that are activated by triple-helical collagen. Aberrant DDR signaling contributes to several human pathologies, including many cancers. We have generated monoclonal antibodies (mAbs) that inhibit DDR1 signaling without interfering with collagen binding. The crystal structure of the monomeric DDR1 extracellular region bound to the Fab fragment of mAb 3E3 reveals that the collagen-binding discoidin (DS) domain is tightly associated with the following DS-like domain, which contains the epitopes of all mAbs. A conserved surface patch in the DS domain outside the collagen-binding site is shown to be required for signaling. Thus, the active conformation of the DDR1 dimer involves collagen-induced contacts between the DS domains, in addition to the previously identified association of transmembrane helices. The mAbs likely inhibit signaling by sterically blocking the extracellular association of DDR1 subunits.     

Architecture and Assembly of HIV Integrase Multimers in the Absence of DNA Substrates

We have applied small angle x-ray scattering and protein cross-linking coupled with mass spectrometry to determine the architectures of full-length HIV integrase (IN) dimers in solution. By blocking interactions that stabilize either a core-core domain interface or N-terminal domain intermolecular contacts, we show that full-length HIV IN can form two dimer types. One is an expected dimer, characterized by interactions between two catalytic core domains. The other dimer is stabilized by interactions of the N-terminal domain of one monomer with the C-terminal domain and catalytic core domain of the second monomer as well as direct interactions between the two C-terminal domains. This organization is similar to the “reaching dimer” previously described for wild type ASV apoIN and resembles the inner, substrate binding dimer in the crystal structure of the PFV intasome. Results from our small angle x-ray scattering and modeling studies indicate that in the absence of its DNA substrate, the HIV IN tetramer assembles as two stacked reaching dimers that are stabilized by core-core interactions. These models of full-length HIV IN provide new insight into multimer assembly and suggest additional approaches for enzyme inhibition.     

Solution structure of the His12 --> Cys mutant of the N-terminal zinc binding domain of HIV-1 integrase complexed to cadmium.

The solution structure of His12 --> Cys mutant of the N-terminal zinc binding domain (residues 1-55; IN(1-55)) of HIV-1 integrase complexed to cadmium has been solved by multidimensional heteronuclear NMR spectroscopy. The overall structure is very similar to that of the wild-type N-terminal domain complexed to zinc. In contrast to the wild-type domain, however, which exists in two interconverting conformational states arising from different modes of coordination of the two histidine side chains to the metal, the cadmium complex of the His12 --> Cys mutant exists in only a single form at low pH. The conformation of the polypeptide chain encompassing residues 10-18 is intermediate between the two forms of the wild-type complex.     

A structural model of the HIV-1 Rev-integrase complex: the molecular basis of integrase regulation by Rev

The HIV-1 Rev and integrase (IN) proteins control important functions in the viral life cycle. We have recently discovered that the interaction between these proteins results in inhibition of IN enzymatic activity. Peptides derived from the Rev and IN binding interfaces have a profound effect on IN catalytic activity: Peptides derived from Rev inhibit IN, while peptides derived from IN stimulate IN activity by inhibiting the Rev-IN interaction. This inhibition leads to multi integration, genomic instability and specific death of virus-infected cells. Here we used protein docking combined with refinement and energy function ranking to suggest a structural model for the Rev-IN complex. Our results indicate that a Rev monomer binds IN at two sites that match our experimental binding data: (1) IN residues 66-80 and 118-128; (2) IN residues 174-188. According to our model, IN binds Rev and its cellular cofactor, lens epithelium derived growth factor (LEDGF), through overlapping interfaces. This supports previous observations that IN is regulated by a tight interplay between Rev and LEDGF. Rev may bind either the IN dimer or tetramer. Accordingly, Rev is suggested to inhibit IN by two possible mechanisms: (i) shifting the oligomerization equilibrium of IN from an active dimer to an inactive tetramer; (ii) displacing LEDGF from IN, resulting in inhibition of IN binding to the viral DNA. Our model is expected to contribute to the development of lead compounds that inhibit the Rev-IN interaction and thus lead to multi-integration of viral cDNA and consequently to apoptosis of HIV-1 infected cells.     

Structure-activity of inhibition of HIV-1 integrase and virus replication by G-quartet oligonucleotides

As novel anti-HIV agents, the G-tetrad-forming oligonucleotides have been explored for their structure-activity relations with regard to inhibition of integrase (IN) (N. Jing, Expert Opin. Investig. Drugs (2000) 9, 1777-1785). We have now developed two families of G-quartet oligonucleotides: T40217-T40222, with potential formation of a tail-to-tail G-quartet dimer, and T40224-T40227, with phosphorothioate (PT) linkages in the guanine loops. The results obtained from biophysical measurements and the assays of the inhibition of HIV-1 IN and virus replication demonstrated that an increase in the length of the G-quartet structure from a monomer (15A) to a tail-to-tail dimer (47A) does not distinctly disrupt the inhibition of HIV-1 IN activity or the inhibition of HIV-1 replication in cell cultures. G-quartet oligonucleotides were observed to induce molecular aggregation of HIV-1 IN and interrupt the binding of viral DNA to HIV-1 IN. Also, PT substitutions did not confer any advantages compared with the regular phosphodiesters for the inhibition of HIV-1 replication by intramolecular G-quartets. The G-quartet motif is the primary requirement for the remarkable nuclease resistance and pronounced biological efficacy of these oligonucleotides.     

Formation of a stable complex between the human immunodeficiency virus integrase protein and viral DNA.

The integrase (IN) protein of the human immunodeficiency virus (HIV) mediates two distinct reactions: (i) specific removal of two nucleotides from the 3' ends of the viral DNA and (ii) integration of the viral DNA into target DNA. Although IN discriminates between specific (viral) DNA and nonspecific DNA in physical in vitro assays, a sequence-specific DNA-binding domain could not be identified in the protein. A nonspecific DNA-binding domain, however, was found at the C terminus of the protein. We examined the DNA-binding characteristics of HIV-1 IN, and found that a stable complex of IN and viral DNA is formed in the presence of Mn2+. The IN-viral DNA complex is resistant to challenge by an excess of competitor DNA. Stable binding of IN to the viral DNA requires that the protein contains an intact N-terminal domain and active site (in the central region of the protein), in addition to the C-terminal DNA-binding domain.     

Determinants of Mg2+-dependent activities of recombinant human immunodeficiency virus type 1 integrase

The relationship between Mg(2+)-dependent activity and the self-assembly state of HIV-1 integrase was investigated using different protein preparations. The first preparations, IN(CHAPS) and IN(dial), were purified in the presence of detergent, but in the case of IN(dial), the detergent was removed during a final dialysis. The third preparation, IN(zn), was purified without any detergent. The three preparations displayed comparable Mn(2+)-dependent activities. In contrast, the Mg(2+)-dependent activity that reflects a more realistic view of the physiological activity strongly depended on the preparation. IN(CHAPS) was not capable of using Mg(2+) as a cofactor, whereas IN(zn) was highly active under the same conditions. In the accompanying paper [Deprez, E., et al. (2000) Biochemistry 39, 9275-9284], we used time-resolved fluorescence anisotropy to demonstrate that IN(CHAPS) was monomeric at the concentration of enzymatic assays. Here, we show that IN(zn) was homogeneously tetrameric under similar conditions. Moreover, IN(dial) that exhibited an intermediary Mg(2+)-dependent activity existed in a monomer-multimer equilibrium. The level of Mg(2+)- but not Mn(2+)-dependent activity of IN(dial) was altered by addition of detergent which plays a detrimental role in the maintenance of the oligomeric organization. Our results indicate that the ability of integrase to use Mg(2+) as a cofactor is related to its self-assembly state in solution, whereas Mn(2+)-dependent activity is not. Finally, the oligomeric IN(zn) was capable of binding efficiently to DNA regardless of the cationic cofactor, whereas the monomeric IN(CHAPS) strictly required Mn(2+). Thus, we propose that a specific conformation of integrase is a prerequisite for its binding to DNA in the presence of Mg(2+).     

New class of HIV-1 integrase (IN) inhibitors with a dual mode of action

tert-Butoxy-(4-phenyl-quinolin-3-yl)-acetic acids (tBPQA) are a new class of HIV-1 integrase (IN) inhibitors that are structurally distinct from IN strand transfer inhibitors but analogous to LEDGINs. LEDGINs are a class of potent antiviral compounds that interacts with the lens epithelium-derived growth factor (LEDGF) binding pocket on IN and were identified through competition binding against LEDGF. LEDGF tethers IN to the host chromatin and enables targeted integration of viral DNA. The prevailing understanding of the antiviral mechanism of LEDGINs is that they inhibit LEDGF binding to IN, which prevents targeted integration of HIV-1. We showed that in addition to the properties already known for LEDGINs, the binding of tBPQAs to the IN dimer interface inhibits IN enzymatic activity in a LEDGF-independent manner. Using the analysis of two long terminal repeat junctions in HIV-infected cells, we showed that the inhibition by tBPQAs occurs at or prior to the viral DNA 3'-processing step. Biochemical studies revealed that this inhibition operates by compound-induced conformational changes in the IN dimer that prevent proper assembly of IN onto viral DNA. For the first time, tBPQAs were demonstrated to be allosteric inhibitors of HIV-1 IN displaying a dual mode of action: inhibition of IN-viral DNA assembly and inhibition of IN-LEDGF interaction.     

A Possible Role for the Asymmetric C-Terminal Domain Dimer of Rous Sarcoma Virus Integrase in Viral DNA Binding

Integration of the retrovirus linear DNA genome into the host chromosome is an essential step in the viral replication cycle, and is catalyzed by the viral integrase (IN). Evidence suggests that IN functions as a dimer that cleaves a dinucleotide from the 3′ DNA blunt ends while a dimer of dimers (tetramer) promotes concerted integration of the two processed ends into opposite strands of a target DNA. However, it remains unclear why a dimer rather than a monomer of IN is required for the insertion of each recessed DNA end. To help address this question, we have analyzed crystal structures of the Rous sarcoma virus (RSV) IN mutants complete with all three structural domains as well as its two-domain fragment in a new crystal form at an improved resolution. Combined with earlier structural studies, our results suggest that the RSV IN dimer consists of highly flexible N-terminal domains and a rigid entity formed by the catalytic and C-terminal domains stabilized by the well-conserved catalytic domain dimerization interaction. Biochemical and mutational analyses confirm earlier observations that the catalytic and the C-terminal domains of an RSV IN dimer efficiently integrates one viral DNA end into target DNA. We also show that the asymmetric dimeric interaction between the two C-terminal domains is important for viral DNA binding and subsequent catalysis, including concerted integration. We propose that the asymmetric C-terminal domain dimer serves as a viral DNA binding surface for RSV IN.