Characterization of adhesion threads of Deinococcus geothermalis as type IV pili

Deinococcus geothermalis E50051 forms tenuous biofilms on paper machine surfaces. Field emission electron microscopy analysis revealed peritrichous appendages which mediated cell-to-surface and cell-to-cell interactions but were absent in planktonically grown cells. The major protein component of the extracellular extract of D. geothermalis had an N-terminal sequence similar to the fimbrial protein pilin annotated in the D. geothermalis DSM 11300 draft sequence. It also showed similarity to the type IV pilin sequence of D. radiodurans and several gram-negative pathogenic bacteria. Other proteins in the extract had N-terminal sequences identical to D. geothermalis proteins with conservative motifs for serine proteases, metallophosphoesterases, and proteins whose function is unknown. Periodic acid-Schiff staining for carbohydrates indicated that these extracellular proteins may be glycosylated. A further confirmation for the presence of glycoconjugates on the cell surface was obtained by confocal laser scanning imaging of living D. geothermalis cells stained with Amaranthus caudatus lectin, which specifically binds to galactose residues. The results indicate that the thread-like appendages of D. geothermalis E50051 are glycosylated type IV pili, bacterial attachment organelles which have thus far not been described for the genus Deinococcus.     

Architecture of Deinococcus geothermalis biofilms on glass and steel: a lectin study

Deinococcus geothermalis is resistant to chemical and physical stressors and forms tenuous biofilms in paper industry. The architecture of its biofilms growing on glass and on stainless acid proof steel was studied with confocal laser scanning microscopy and fluorescent lectins and nanobeads as in situ probes. Hydrophobic nanobeads adhered to the biofilms but did not penetrate to biofilm interior. In contrast, the biofilms were readily permeable towards many different lectins. A skeletal network of glycoconjugates, reactive with Dolichos biflorus and Maclura pomifera lectins, was prominent in the space inside the biofilm colony core but absent on the exterior. Cells in the core space of the biofilm were interconnected by a network of adhesion structures, reactive with Amaranthus caudatus lectin but with none of the 65 other tested lectins. The glycoconjugates connecting the individual cells to steel reacted with Phaseolus vulgaris lectin whereas those connecting to glass mainly reacted with A. caudatus lectin. Envelopes of all cells in the D. geothermalis biofilm reacted with several other lectins, with many different specificities. We conclude that numerous different glycoconjugates are involved in the adhesion and biofilm formation of D. geothermalis , possibly contributing its unique survival capacity when exposed to dehydration, biocidal chemicals and other extreme conditions.     

Microbe repelling coated stainless steel analysed by field emission scanning electron microscopy and physicochemical methods

Coating of stainless steel with diamond-like carbon or certain fluoropolymers reduced or almost eliminated adhesion and biofilm growth of Staphylococcus epidermidis, Deinococcus geothermalis, Meiothermus silvanus and Pseudoxanthomonas taiwanensis. These species are known to be pertinent biofilm formers on medical implants or in the wet-end of paper machines. Field emission scanning electron microscopic analysis showed that Staph. epidermidis, D. geothermalis and M. silvanus grew on stainless steel using thread-like organelles for adhesion and biofilm formation. The adhesion threads were fewer in number on fluoropolymer-coated steel than on plain steel and absent when the same strains were grown in liquid culture. Psx. taiwanensis adhered to the same surfaces by a mechanism involving cell ghosts on which the biofilm of live cells grew. Hydrophilic (diamond-like carbon) or hydrophobic (fluoropolymer) coatings reduced the adherence of the four test bacteria on different steels. Selected topographic parameters, including root-mean-square roughness (S (q)), skewness (S (sk)) and surface kurtosis (S (ku)), were analysed by atomic force microscopy. The surfaces that best repelled microbial adhesion of the tested bacteria had higher skewness values than those only slightly repelling. Water contact angle, measured (theta (m)) or roughness corrected (theta (y)), affected the tendency for biofilm growth in a different manner for the four test bacteria.     

CsgA production by Escherichia coli O157:H7 alters attachment to abiotic surfaces in some growth environments

The role of curli expression in attachment of Escherichia coli O157:H7 to glass, Teflon, and stainless steel (SS) was investigated through the creation of csgA knockout mutants in two isolates of E. coli O157:H7. Attachment assays using epifluorescence microscopy and measurements of the force of adhesion of bacterial cells to the substrates using atomic force microscopy (AFM) force mapping were used to determine differences in attachment between wild-type (wt) and csgA-negative (ΔcsgA) strains following growth in four different media. The hydrophobicity of the cells was determined using contact angle measurements (CAM) and bacterial adhesion to hydrocarbons (BATH). The attachment assay results indicated that ΔcsgA strains attached to glass, Teflon, and SS surfaces in significantly different numbers than their wt counterparts in a growth medium-dependent fashion (P < 0.05). However, no clear correlation was seen between attachment numbers, surface type, or growth medium. No correlation was seen between BATH and CAM results (R(2) < 0.70). Hydrophobicity differed between the wt and ΔcsgA in some cases in a growth medium- and method-dependent fashion (P < 0.05). AFM force mapping revealed no significant difference in the forces of adhesion to glass and SS surfaces between wt and ΔcsgA strains (P > 0.05) but a significantly greater force of adhesion to Teflon for one of the two wt strains than for its ΔcsgA counterpart (P < 0.05). This study shows that CsgA production by E. coli O157:H7 may alter attachment behavior in some environments; however, further investigation is required in order to determine the exact relationship between CsgA production and attachment to abiotic surfaces.     

Mechanisms of biofilm formation in paper machine by Bacillus species: the role of Deinococcus geothermalis

Mechanisms for the undesired persistence of Bacillus species in paper machine slimes were investigated. Biofilm formation was measured for industrial Bacillus isolates under paper machine wet-end-simulating conditions (white water, pH 7, agitated at 45°C for 1–2 days). None of the 40 tested strains of seven Bacillus species formed biofilm on polished stainless steel or on polystyrene surfaces as a monoculture. Under the same conditions, Deinococcus geothermalis E50051 covered all test surfaces as a patchy thick biofilm. The paper machine bacilli, however, formed mixed biofilms with D. geothermalis E50051 as revealed by confocal microscopy. Biofilm interactions between the bacilli and the deinococci varied from synergism to antagonism. Synergism in biofilm formation of D. geothermalis E50051 was strongest with Bacillus coagulans D50192, and with the type strains of B. coagulans, B. amyloliquefaciens or B. pumilus. Two B. licheniformis, one B. amyloliquefaciens, one B. pumilus and four B. cereus strains antagonized biofilm production by D. geothermalis. B. licheniformis D50141 and the type strain of B. licheniformis were the strongest antagonists. These bacteria inhibited deinococcal growth by emitting heat-stable, methanol-soluble metabolite(s). We conclude that the persistence of Bacillus species in paper machine slimes relates to their ability to conquer biofilms formed by primary colonizers, such as D. geothermalis. Journal of Industrial Microbiology & Biotechnology (2001) 27, 343–351. Received 17 April 2001/ Accepted in revised form 16 July 2001     

Destruction of Deinococcus geothermalis biofilm by photocatalytic ALD and sol-gel TiO2 surfaces

The aim of the present work was to explore possibilities of photocatalytic TiO₂ coating for reducing biofilms on non-living surfaces. The model organism, Deinococcus geothermalis, known to initiate growth of durable, colored biofilms on machine surfaces in the paper industry, was allowed to form biofilms on stainless steel, glass and TiO₂ film coated glass or titanium. Field emission electron microscopy revealed that the cells in the biofilm formed at 45°C under vigorous shaking were connected to the surface by means of numerous adhesion threads of 0.1--0.3 μm in length. Adjacent cells were connected to one another by threads of 0.5--1 μm in length. An ultrastructural analysis gave no indication for the involvement of amorphous extracellular materials (e.g., slime) in the biofilm. When biofilms on photocatalytic TiO₂ surfaces, submerged in water, were exposed to 20 W h m⁻² of 360 nm light, both kinds of adhesion threads were completely destroyed and the D. geothermalis cells were extensively removed (from >10⁷ down to below 10⁶ cells cm⁻²). TiO₂ films prepared by the sol-gel technique were slightly more effective than those prepared by the ALD technique. Doping of the TiO₂ with sulfur did not enhance its biofilm-destroying capacity. The results show that photocatalytic TiO₂ surfaces have potential as a self-cleaning technology for warm water using industries.     

原子力显微镜 (AFM) 在细菌生物被膜研究中的应用

原子力显微镜(AFM)作为一项重要的表面可视化技术,以其独特的优势(纳米级的空间分辨率、皮牛级力灵敏度、免标记、可在溶液环境下工作)被广泛应用于生物被膜的研究。AFM不仅可以在近生理环境下对生物被膜表面超微形貌进行可视化表征,同时还可以通过纳米压痕对生物被膜的机械特性(弹性和粘性)进行定量测量,利用AFM单细胞和单分子力谱技术可以获得生物被膜形成过程中细胞-基底以及细胞-细胞之间的相互作用力,为生物被膜的实时原位系统研究提供了可行性。本文简述了AFM的基本操作原理,综述了近年来AFM用于生物被膜表面超微结构成像、机械特性测量以及相互作用力研究方面的进展,并对AFM在生物被膜研究中面临的问题和未来的发展方向进行了讨论。     

Novel method for the proteomic investigation of a dairy-associated Bacillus cereus biofilm

The biofilm proteome of a dairy-associated Bacillus cereus strain (B. cereus 5) was investigated. Biofilm biomass of sufficient concentration for 2D-PAGE was obtained by growing the culture in the presence of glass wool. B. cereus 5 readily attached to the glass wool and biofilms formed within 18 h. The biofilm proteome of whole-cell proteins revealed that 10 proteins were synthesized as a result of surface attachment of which four were unique to the biofilm profile. Seven proteins appeared to be absent in the biofilm profile. The altered proteomes indicated that changes took place in the regulation of protein expression when B. cereus 5 cells attached to surfaces.     

<Emphasis Type="Italic">Escherichia coli,Pseudomonas aeruginosa</Emphasis>, and<Emphasis Type="Italic"> Staphylococcus aureus</Emphasis> Attachment Patterns on Glass Surfaces with Nanoscale Roughness

Attachment tendencies of Escherichia coli K12, Pseudomonas aeruginosa ATCC 9027, and Staphylococcus aureus CIP 68.5 onto glass surfaces of different degrees of nanometer-scale roughness have been studied. Contact-angle and surface-charge measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM) were employed to characterize substrata and bacterial surfaces. Modification of the glass surface resulted in nanometer-scale changes in the surface topography, whereas the physicochemical characteristics of the surfaces remained almost constant. AFM analysis indicated that the overall surface roughness parameters were reduced by 60–70%. SEM, CLSM, and AFM analysis clearly demonstrates that although E. coli, P. aeruginosa and S. aureus present significantly different patterns of attachment, all of the species exhibited a greater propensity for adhesion to the “nano-smooth” surface. The bacteria responded to the surface modification with a remarkable change in cellular metabolic activity, as shown by the characteristic cell morphologies, production of extracellular polymeric substances, and an increase in the number of bacterial cells undergoing attachment.     

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy,simple counting methods,and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.     

Esp-independent biofilm formation by Enterococcus faecalis

Enterococcus faecalis is a gram-positive opportunistic pathogen known to form biofilms in vitro. In addition, this organism is often isolated from biofilms on the surfaces of various indwelling medical devices. However, the molecular mechanisms regulating biofilm formation in these clinical isolates are largely unknown. Recent work has suggested that a specific cell surface protein (Esp) of E. faecalis is critical for biofilm formation by this organism. However, in the same study, esp-deficient strains of E. faecalis were found to be capable of biofilm formation. To test the hypothesis that Esp is dispensable for biofilm formation by E. faecalis, we used microtiter plate assays and a chemostat-based biofilm fermentor assay to examine biofilm formation by genetically well-defined, non-Esp-expressing strains. Our results demonstrate that in vitro biofilm formation occurs, not only in the absence of esp, but also in the absence of the entire pathogenicity island that harbors the esp coding sequence. Using scanning electron microscopy to evaluate biofilms of E. faecalis OG1RF grown in the fermentor system, biofilm development was observed to progress through multiple stages, including attachment of individual cells to the substratum, microcolony formation, and maturation into complex multilayered structures apparently containing water channels. Microtiter plate biofilm analyses indicated that biofilm formation or maintenance was modulated by environmental conditions. Furthermore, our results demonstrate that expression of a secreted metalloprotease, GelE, enhances biofilm formation by E. faecalis. In summary, E. faecalis forms complex biofilms by a process that is sensitive to environmental conditions and does not require the Esp surface protein.     

Adhesion of anaerobic microorganisms to solid surfaces and the effect of sequential attachment on adhesion characteristics

The attachment of three anaerobic microorganisms, Desulfomonile tiedjei, Syntrophomonas wolfei, and Desulfovibrio sp. strain G11, was investigated to determine if the presence of one species could influence the adhesion of another species to glass surfaces. The results indicated that the numbers and distribution of attached cells of one species could be influenced considerably by the presence of another species and the order in which the test species were exposed to the surface. D. tiedjei was found to detach readily from surfaces when it was not the primary colonizer. The attachment of Desulfovibrio G11 as the primary colonizer appeared to be stabilized by exposure to another test species. Under certain experimental conditions the test organisms formed close associations with each other on the surfaces. These findings demonstrate that the characteristics of anaerobic community biofilms can be determined by both the adhesion characteristics of the individual species and the interactions among those microorganisms.     

Adhesion of <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> biofilms to glass,stainless steel and cellulose

Objectives

The adhesion of colloidal probes of stainless steel, glass and cellulose to Pseudomonas fluorescens biofilms was examined using atomic force microscopy (AFM) to allow comparisons between surfaces to which biofilms might adhere.

Results

Biofilm was grown on a stainless steel substrate and covered most of the surface after 96 h. AFM approach and retraction curves were obtained when the biofilm was immersed in a tryptone/soy medium. On approach, all the colloidal probes experienced a long non-contact phase more than 100 nm in length, possibly due to the steric repulsion by extracellular polymers from the biofilm and hydrophobic effects. Retraction data showed that the adhesion varied from position to position on the biofilm. The mean value of adhesion of glass to the biofilm (48 ± 7 nN) was the greatest, followed by stainless steel (30 ± 7 nN) and cellulose (7.8 ± 0.4 nN).

Conclusion

The method allows understanding of adhesion between the three materials and biofilm, and development of a better strategy to remove the biofilm from these surfaces relevant to different industrial applications.

     

Adhesion as a weapon in microbial competition

Microbes attach to surfaces and form dense communities known as biofilms, which are central to how microbes live and influence humans. The key defining feature of biofilms is adhesion, whereby cells attach to one another and to surfaces, via attachment factors and extracellular polymers. While adhesion is known to be important for the initial stages of biofilm formation, its function within biofilm communities has not been studied. Here we utilise an individual-based model of microbial groups to study the evolution of adhesion. While adhering to a surface can enable cells to remain in a biofilm, consideration of within-biofilm competition reveals a potential cost to adhesion: immobility. Highly adhesive cells that are resistant to movement face being buried and starved at the base of the biofilm. However, we find that when growth occurs at the base of a biofilm, adhesion allows cells to capture substratum territory and force less adhesive, competing cells out of the system. This process may be particularly important when cells grow on a host epithelial surface. We test the predictions of our model using the enteric pathogen Vibrio cholerae, which produces an extracellular matrix important for biofilm formation. Flow cell experiments indicate that matrix-secreting cells are highly adhesive and form expanding clusters that remove non-secreting cells from the population, as predicted by our simulations. Our study shows how simple physical properties, such as adhesion, can be critical to understanding evolution and competition within microbial communities.     

The attachment of Enteromorpha zoospores to a bacterial biofilm assemblage

This study has investigated the relationship between bacterial biofilms and the attachment of zoospores of the green macroalga Enteromorpha. Zoospore attachment to glass slides was enhanced in the presence of a bacterial biofilm assemblage, and the number attaching increased with the number of bacteria present. Zoospores also attached to control surfaces, but at lower numbers; glass surfaces conditioned in autoclaved seawater had the same number of zoospores attached as new glass surfaces. The spatial relationship between bacterial cells and attached zoospores was quantified by image analysis. The hypothesis tested was that zoospores attached preferentially to, or in the very close vicinity of, bacterial cells. Spatial microscopic analysis showed that more bacteria were covered by zoospores than would be expected if zoospore attachment was a random process and zoospores appeared to attach to bacterial clusters. The most likely explanation is that zoospores are attracted to bacterial cells growing on surfaces and the presence of a bacterial biofilm enhances their settlement. The possibility is discussed that Enteromorpha zoospores respond to a chemical signal produced by bacteria, i.e. that there may be prokaryote‐eukaryote cell signalling.     

Comparison of fluorinated polymers against stainless steel, glass and polypropylene in microbial biofilm adherence and removal

Biofilm formation is a long-standing problem in ultrapure water and bioprocess fluid transport lines. The standard materials used in these applications (316L stainless steel, polypropylene and glass) have long been known to be good surfaces for the attachment of bacteria and other biological materials. To compare the relative tenacity of biofilms grown on materials used in manufacturing processes, a model system for biofilm attachment was constructed that approximates the conditions in industrial process systems. New fluorinated polymers were compared to the above materials by evaluating the surface area coverage of bacterial populations on materials before and after mild chemical treatment. In addition, contact angle studies compared the relative hydrophobicity of surfaces to suspensions of bacteria in growth media, and scanning electron microscopy and atomic force microscopy studies were used to characterize surface smoothness and surface defects. Biofilm adherence to polymer-based substrata was determined to be a function of both surface finish and surface chemistry. Specifically, materials that are less chemically reactive, as indicated by higher contact angle, can have rougher surface finishes and still be amenable to biofilm removal. Received 20 March 1997/ Accepted in revised form 15 July 1997     

Elasticity and physico-chemical properties during drinking water biofilm formation

Atomic force microscope techniques and multi-staining fluorescence microscopy were employed to study the steps in drinking water biofilm formation. During the formation of a conditioning layer, surface hydrophobic forces increased and the range of characteristic hydrophobic forces diversified with time, becoming progressively complex in macromolecular composition, which in return triggered irreversible cellular adhesion. AFM visualization of 1 to 8 week drinking water biofilms showed a spatially discontinuous and heterogeneous distribution comprising an extensive network of filamentous fungi in which biofilm aggregates were embedded. The elastic modulus of 40-day-old biofilms ranged from 200 to 9000 kPa, and the biofilm deposits with a height >0.5 μm had an elastic modulus <600 kPa, suggesting that the drinking water biofilms were composed of a soft top layer and a basal layer with significantly higher elastic modulus values falling in the range of fungal elasticity.     

Elasticity and physico-chemical properties during drinking water biofilm formation

Atomic force microscope techniques and multi-staining fluorescence microscopy were employed to study the steps in drinking water biofilm formation. During the formation of a conditioning layer, surface hydrophobic forces increased and the range of characteristic hydrophobic forces diversified with time, becoming progressively complex in macromolecular composition, which in return triggered irreversible cellular adhesion. AFM visualization of 1 to 8 week drinking water biofilms showed a spatially discontinuous and heterogeneous distribution comprising an extensive network of filamentous fungi in which biofilm aggregates were embedded. The elastic modulus of 40-day-old biofilms ranged from 200 to 9000?kPa, and the biofilm deposits with a height >0.5 μm had an elastic modulus <600?kPa, suggesting that the drinking water biofilms were composed of a soft top layer and a basal layer with significantly higher elastic modulus values falling in the range of fungal elasticity.     

Initial Phases of biofilm formation in Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is a facultative Fe(III)- and Mn(IV)-reducing microorganism and serves as a model for studying microbially induced dissolution of Fe or Mn oxide minerals as well as biogeochemical cycles. In soil and sediment environments, S. oneidensis biofilms form on mineral surfaces and are critical for mediating the metabolic interaction between this microbe and insoluble metal oxide phases. In order to develop an understanding of the molecular basis of biofilm formation, we investigated S. oneidensis biofilms developing on glass surfaces in a hydrodynamic flow chamber system. After initial attachment, growth of microcolonies and lateral spreading of biofilm cells on the surface occurred simultaneously within the first 24 h. Once surface coverage was almost complete, biofilm development proceeded with extensive vertical growth, resulting in formation of towering structures giving rise to pronounced three-dimensional architecture. Biofilm development was found to be dependent on the nutrient conditions, suggesting a metabolic control. In global transposon mutagenesis, 173 insertion mutants out of 15,000 mutants screened were identified carrying defects in initial attachment and/or early stages in biofilm formation. Seventy-one of those mutants exhibited a nonswimming phenotype, suggesting a role of swimming motility or motility elements in biofilm formation. Disruption mutations in motility genes (flhB, fliK, and pomA), however, did not affect initial attachment but affected progression of biofilm development into pronounced three-dimensional architecture. In contrast, mutants defective in mannose-sensitive hemagglutinin type IV pilus biosynthesis and in pilus retraction (pilT) showed severe defects in adhesion to abiotic surfaces and biofilm formation, respectively. The results provide a basis for understanding microbe-mineral interactions in natural environments.     

Nanoscale investigation on adhesion of E. coli to surface modified silicone using atomic force microscopy

Bacterial adhesion on biomaterial surfaces is the initial step in establishing infections and leads to the formation of biofilms. In this study, silicone was modified with different biopolymers and silanes, including: heparin, hyaluronan, and self-assembled octadecyltrichlorosilane (OTS), and fluoroalkylsilane (FAS). The aim was to provide a stable and bacteria-resistant surface by varying the degree of hydrophobicity and the surface structure. The adhesion of Escherichia coli (JM 109) on different modified silicone surfaces was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Mica, an ideal hydrophilic and smooth surface, was employed as a control specimen to study the effect of hydrophobicity and surfaces roughness on bacterial adhesion. AFM probes were coated with E. coli and the force measurements between the bacteria-immobilized tip and various materials surfaces were obtained while approaching to and retracting from the surfaces. A short-range repulsive force was observed between the FAS coated silicone and bacteria. The pull-off force of bacteria to FAS was the smallest among coated surfaces. On the other hand, heparin exhibited a long-range attractive force during approach and required a higher pull-off force in retraction. Both AFM and SEM results indicated that FAS reduced bacterial adhesion whereas heparin enhanced the adhesion compared to pure silicone. The work demonstrates that hydrophobicity cannot be used as a criterion to predict bacterial adhesion. Rather, both the native properties of the individual strain of bacteria and the specific functional structure of the surfaces determine the strength of force interaction, and thus the extent of adhesion.