The tailless icosahedral membrane virus PRD1 localizes the proteins involved in genome packaging and injection at a unique vertex

The double-stranded DNA (dsDNA) virus PRD1 carries its genome in a membrane surrounded by an icosahedral protein shell. The shell contains 240 copies of the trimeric P3 protein arranged with a pseudo T = 25 triangulation that is reminiscent of the mammalian adenovirus. DNA packaging and infection are believed to occur through the vertices of the particle. We have used immunolabeling to define the distribution of proteins on the virion surface. Antibodies to protein P3 labeled the entire surface of the virus. Most of the 12 vertices labeled with antibodies directed against proteins P5, P2, and P31. These proteins are known to function in virus binding to the cell surface. Proteins P6, P11, and P20 were found on a single vertex per virion. The P6 and P20 proteins are believed to function in DNA packaging. Protein P11 is a pilot protein that is involved in a complex that mediates the early stages of DNA entry to the host cell. Labeling with antibodies to P5 or P2 did not affect the labeling of P6, the unique vertex protein. Labeling with antibodies to the unique vertex protein P6 interfered with the labeling by antibodies to the unique vertex protein P20. We conclude that PRD1 utilizes 11 of its vertices for initial receptor binding. It utilizes a single, unique vertex for both DNA packing during assembly and DNA delivery during infection.     

Efficient DNA packaging of bacteriophage PRD1 requires the unique vertex protein P6

The assembly of bacteriophage PRD1 proceeds via formation of empty procapsids containing an internal lipid membrane, into which the linear double-stranded DNA genome is subsequently packaged. The packaging ATPase P9 and other putative packaging proteins have been shown to be located at a unique vertex of the PRD1 capsid. Here, we describe the isolation and characterization of a suppressor-sensitive PRD1 mutant deficient in the unique vertex protein P6. Protein P6 was found to be an essential part of the PRD1 packaging machinery; its absence leads to greatly reduced packaging efficiency. Lack of P6 was not found to affect particle assembly, because in the P6-deficient mutant infection, wild-type (wt) amounts of particles were produced, although most were empty. P6 was determined not to be a specificity factor, as the few filled particles seen in the P6-deficient infection contained only PRD1-specific DNA. The presence of P6 was not necessary for retention of DNA in the capsid once packaging had occurred, and P6-deficient DNA-containing particles were found to be stable and infectious, albeit not as infectious as wt PRD1 virions. A packaging model for bacteriophage PRD1, based on previous results and those obtained in this study, is presented.     

Integral membrane protein P16 of bacteriophage PRD1 stabilizes the adsorption vertex structure

The icosahedral membrane-containing double-stranded DNA bacteriophage PRD1 has a labile receptor binding spike complex at the vertices. This complex, which is analogous to that of adenovirus, is formed of the penton protein P31, the spike protein P5, and the receptor binding protein P2. Upon infection, the internal phage membrane transforms into a tubular structure that protrudes through a vertex and penetrates the cell envelope for DNA injection. We describe here a new class of PRD1 mutants lacking virion-associated integral membrane protein P16. P16 links the spike complex to the viral membrane and is necessary for spike stability. We also show that the unique vertex used for DNA packaging is intact in the P16-deficient particle, indicating that the 11 adsorption vertices and the 1 portal vertex are functionally and structurally distinct.     

Solution structure of bacteriophage PRD1 vertex complex

Bacteriophage PRD1 is a prototype of viruses with an internal membrane. The icosahedral capsid and major coat protein share structural similarity with the corresponding structures of adenovirus. The present study further explores similarities between these viruses, considering the 5-fold vertex assemblies. The vertex structure of bacteriophage PRD1 consists of proteins P2, P5, and P31. The vertex complex mediates host cell binding and controls double-stranded DNA delivery. Quaternary structures and interactions of purified spike proteins were studied by synchrotron radiation x-ray solution scattering. Low resolution models of the vertex proteins P5, P2, and P31 were reconstructed ab initio from the scattering data. Protein P5 is a long trimer that resembles the adenovirus spike protein pIV. The receptor-binding protein P2 is a 15.5-nm long, thin monomer and does not have an adenovirus counterpart. P31 forms a pentameric base with a maximum diameter of 8.5 nm, which is thinner than the adenovirus penton pIII. P5 further polymerize into a nonameric form ((P5(3))(3)). In the presence of P31, P5 associates into a P5(6):P31 complex. The constructed models of these assemblies provided support for a model of vertex assembly onto the virion. Although similar in overall architecture, clear differences between PRD1 and adenovirus spike assemblies have been revealed.     

Diffraction quality crystals of PRD1, a 66-MDa dsDNA virus with an internal membrane

It has proved difficult to obtain well diffracting single crystals of macromolecular complexes rich in lipid. We report here the path that has led to crystals of the bacteriophage PRD1, a particle containing approximately 2,000 protein subunits from 18 different protein species, around 10 of which are integral membrane proteins associated with a host-derived lipid bilayer of some 12,500 lipid molecules. These crystals are capable of diffracting X-rays to Bragg spacings below 4A. It is hoped that some lessons learned from PRD1 will be applicable to other lipidic systems and that these crystals will allow, as a proof of principle, the determination of the structure of the virus in terms of a detailed atomic model.     

Sequential model of phage PRD1 DNA delivery: active involvement of the viral membrane

DNA translocation across the barriers of recipient cells is not well understood. Viral DNA delivery mechanisms offer an opportunity to obtain useful information in systems in which the process can be arrested to a number of stages. PRD1 is an icosahedral double-stranded (ds)DNA bacterial virus with an internal membrane. It is an atypical dsDNA phage, as any of the vertex spikes can be used for receptor recognition. In this report, we dissect the PRD1 DNA entry into a number of steps: (i) outer membrane (OM) penetration; (ii) peptidoglycan digestion; (iii) cytoplasmic membrane (CM) penetration; and (iv) DNA translocation. We present a model for PRD1 DNA entry proposing that the initial stage of entry is powered by the pressure build-up during DNA packaging. The viral protein P11 is shown to function as the first DNA delivery protein needed to penetrate the OM. We also report a DNA translocation machinery composed of at least three viral integral membrane proteins, P14, P18 and P32.     

The small viral membrane-associated protein P32 is involved in bacteriophage PRD1 DNA entry

The lipid-containing bacteriophage PRD1 infects a variety of gram-negative cells by injecting its linear double-stranded DNA genome into the host cell cytoplasm, while the protein capsid is left outside. The virus membrane and several structural proteins are involved in phage DNA entry. In this work we identified a new infectivity protein of PRD1. Disruption of gene XXXII resulted in a mutant phenotype defective in phage reproduction. The absence of the protein P32 did not compromise the particle assembly but led to a defect in phage DNA injection. In P32-deficient particles the phage membrane is unable to undergo a structural transformation from a spherical to a tubular form. Since P32(-) particles are able to increase the permeability of the host cell envelope to a degree comparable to that found with wild-type particles, we suggest that the tail-tube formation is needed to eject the DNA from the phage particle rather than to reach the host cell interior.     

DNA packaging orders the membrane of bacteriophage PRD1.

Bacteriophage PRD1 contains a linear dsDNA genome enclosed by a lipid membrane lying within a protein coat. Determination of the structure of the detergent-treated particle to 2 nm by cryo-electron microscopy and three-dimensional reconstruction has defined the position of the major coat protein P3. The coat contains 240 copies of trimeric P3 packed into positions of local 6-fold symmetry on a T = 25 lattice. The three-dimensional structures of the PRD1 virion and a DNA packaging mutant to a resolution of 2.8 nm have revealed specific interactions between the coat and the underlying membrane. The membrane is clearly visible as two leaflets separated by 2 nm and spanned by transmembrane density. The size of the coat does not change upon DNA packaging. Instead, the number of interactions seen between the protein shell and the membrane and the order of the membrane components increase. Thus the membrane of PRD1 plays a role in assembly which is akin to that played by the nucleocapsid in other membrane viruses.     

Structure and assembly of bacteriophage PRD1, and Escherichia coli virus with a membrane

This article describes the structure and assembly of bacteriophage PRD1, a lipid-containing virus able to infect Escherichia coli. This phage, with an approximate diameter of 65 nm, is composed of an outer protein shell surrounding a lipid-protein membrane which, in turn, encloses the nucleic acid. The phage genome consists of a single linear dsDNA molecule of about 15 kb that has a protein covalently linked to each of its 5' ends. This protein is used as a primer in DNA replication. During assembly membrane proteins are inserted into the host cytoplasmic membrane while major capsid protein multimers are found in the cytoplasm. Capsid multimers, assisted by two nonstructural assembly factors, are capable of translocating the virus-specific membrane resulting in the formation of cytoplasmic empty particles. Subsequent DNA packaging leads to the formation of infections virus.     

Vaccinia virus A11 is required for membrane rupture and viral membrane assembly

Although most enveloped viruses acquire their membrane from the host by budding or by a wrapping process, collective data argue that nucleocytoplasmic large DNA viruses (NCLDVs) may be an exception. The prototype member of NCLDVs, vaccinia virus (VACV) may induce rupture of endoplasmic‐reticulum‐derived membranes to build an open‐membrane sphere that closes after DNA uptake. This unconventional membrane assembly pathway is also used by at least 3 other members of the NCLDVs. In this study, we identify the VACV gene product of A11, as required for membrane rupture, hence for VACV membrane assembly and virion formation. By electron tomography, in the absence of A11, the site of assembly formed by the viral scaffold protein D13 is surrounded by endoplasmic reticulum cisternae that are closed. We use scanning transmission electron microscopy–electron tomography to analyse large volumes of cells and demonstrate that in the absence of A11, no open membranes are detected. Given the pivotal role of D13 in initiating VACV membrane assembly, we also analyse viral membranes in the absence of D13 synthesis and show that this protein is not required for rupture. Finally, consistent with a role in rupture, we show that during wild‐type infection, A11 localises predominantly to the small ruptured membranes, the precursors of VACV membrane assembly. These data provide strong evidence in favour of the unusual membrane biogenesis of VACV and are an important step towards understanding its molecular mechanism.     

The structure of the bacteriophage PRD1 spike sheds light on the evolution of viral capsid architecture

Comparisons of bacteriophage PRD1 and adenovirus protein structures and virion architectures have been instrumental in unraveling an evolutionary relationship and have led to a proposal of a phylogeny-based virus classification. The structure of the PRD1 spike protein P5 provides further insight into the evolution of viral proteins. The crystallized P5 fragment comprises two structural domains: a globular knob and a fibrous shaft. The head folds into a ten-stranded jelly roll beta barrel, which is structurally related to the tumor necrosis factor (TNF) and the PRD1 coat protein domains. The shaft domain is a structural counterpart to the adenovirus spike shaft. The structural relationships between PRD1, TNF, and adenovirus proteins suggest that the vertex proteins may have originated from an ancestral TNF-like jelly roll coat protein via a combination of gene duplication and deletion.     

Structure and assembly of bacteriophage PRD1, an Escherichia coli virus with a membrane

This article describes the structure and assembly of bacteriophage PRD1, a lipid-containing virus able to infect Escherichia coli. This phage, with an approximate diameter of 65 nm, is composed of an outer protein shell surrounding a lipid-protein membrane which, in turn, encloses the nucleic acid. The phage genome consists of a single linear dsDNA molecule of about 15 kb that has a protein covalently linked to each of its 5′ ends. This protein is used as a primer in DNA replication. During assembly membrane proteins are inserted into the host cytoplasmic membrane while major capsid protein multimers are found in the cytoplasm. Capsid multimers, assisted by two nonstructural assembly factors, are capable of translocating the virus-specific membrane resulting in the formation of cytoplasmic empty particles. Subsequent DNA packaging leads to the formation of infectious virus.     

Vaccinia virus J1R protein: a viral membrane protein that is essential for virion morphogenesis

Vaccinia virus, a member of the poxvirus family, contains a conserved J1R open reading frame that encodes a late protein of 17.8 kDa. The 18-kDa J1R protein is associated mainly with the membrane fraction of intracellular mature virus particles. This study examines the biological function of J1R protein in the vaccinia virus life cycle. A recombinant vaccinia virus was constructed to conditionally express J1R protein in an isopropyl-beta-D-galactopyranoside (IPTG)-inducible manner. When J1R is not expressed during vaccinia virus infection, the virus titer is reduced approximately 100-fold. In contrast, J1R protein is not required for viral gene expression, as indicated by protein pulse-labeling. J1R protein is also not required for DNA processing, as the resolution of the concatemer junctions of replicated viral DNA was detected without IPTG. A deficiency of J1R protein caused a severe delay in the processing of p4a and p4b into mature core proteins 4a and 4b, indicating that J1R protein participates in virion morphogenesis. Infected cells grown in the absence of IPTG contained very few intracellular mature virions in the cytoplasm, and enlarged viroplasm structures accumulated with viral crescents attached at the periphery. Abundant intermediate membrane structures of abnormal shapes were observed, and many immature virions were either empty or partially filled, indicating that J1R protein is important for DNA packaging into immature virions. J1R protein also coimmunoprecipited with A45R protein in infected cells. In summary, these results indicate that vaccinia virus J1R is a membrane protein that is required for virus growth and plaque formation. J1R protein interacts with A45R protein and performs an important role during immature virion formation in cultured cells.     

The pattern-recognition molecule Nod1 is localized at the plasma membrane at sites of bacterial interaction

The pattern-recognition molecule Nod1 is a critical sensor for bacterial derived diaminopimelic acid-containing peptidoglycan fragments which induces innate immune responses in epithelial cells. Here we report the subcellular localization of this protein in human epithelial cells. Nod1 is localized in the cytosol and at the plasma membrane in human cells. This membrane association is dependent on the integrity of the protein, on its signalling capacity and on an intact actin cytoskeleton. Signalling-inactive mutants of Nod1 or disruption of the actin cytoskeleton interferes with this localization pattern and impacts on downstream NF-κB activation. Moreover, the invasive bacterium Shigella flexneri was used as a model for physiological activation of Nod1. Imaging revealed that Nod1 is recruited to the site of bacterial entry, where it colocalizes with NEMO. Our data provide evidence that membrane association is linked to Nod1 function and, in view of recent findings on Nod2, that this may be a common feature of NLR family members.     

Role for human immunodeficiency virus type 1 membrane cholesterol in viral internalization

The membrane of human immunodeficiency virus type 1 (HIV-1) virions contains high levels of cholesterol and sphingomyelin, an enrichment that is explained by the preferential budding of the virus through raft microdomains of the plasma membrane. Upon depletion of cholesterol from HIV-1 virions with methyl-beta-cyclodextrin, infectivity was almost completely abolished. In contrast, this treatment had only a mild effect on the infectiousness of particles pseudotyped with the G envelope of vesicular stomatitis virus. The cholesterol-chelating compound nystatin had a similar effect. Cholesterol-depleted HIV-1 virions exhibited wild-type patterns of viral proteins and contained normal levels of cyclophilin A and glycosylphosphatidylinositol-anchored proteins. Nevertheless, and although they could still bind target cells, these virions were markedly defective for internalization. These results indicate that the cholesterol present in the HIV-1 membrane plays a prominent role in the fusion process that is key to viral entry and suggest that drugs capable of disturbing the lipid composition of virions could serve as a basis for the development of microbicides.     

The unique role of domain 2A of the hepatitis A virus precursor polypeptide P1-2A in viral morphogenesis

The initial step during assembly of the hepatitis A virus particle is driven by domain 2A of P1-2A, which is the precursor of the structural proteins. The proteolytic removal of 2A from particulate VP1-2A by an as yet unknown host enzyme presumably terminates viral morphogenesis. Using a genetic approach, we show that a basic amino acid residue at the C-terminus of VP1 is required for efficient particle assembly and that host proteases trypsin and cathepsin L remove 2A from hepatitis A virus particles in vitro. Analyses of insertion mutants in the C-terminus of 2A reveal that this part of 2A is important for liberation of P1-2A from the polyprotein. The data provide the first evidence that the VP1/2A junction is involved in both viral particle assembly and maturation and, therefore, seems to coordinate the first and last steps in viral morphogenesis.     

The activity of the protease of human immunodeficiency virus type 1 is initiated at the membrane of infected cells before the release of viral proteins and is required for release to occur with maximum efficiency.

The final steps in the production of the type C retroviruses include assembly of the viral core particle and release of virions from the surface of the infected cell. The core proteins are translated as part of one of two precursors, Gag and Gag/Pol, which are cleaved by a virally encoded protease. We examined the interaction between the processing of the human immunodeficiency virus type 1 Gag precursor and the membrane-based assembly and budding of virions. Our results indicate that cleavage by the viral protease is initiated at the membrane of the infected cell during virus release and that protease activity is required for virion release to occur with maximum efficiency.     

The vaccinia virus G1L putative metalloproteinase is essential for viral replication in vivo

The function of the putative metalloproteinase encoded by the vaccinia virus G1L gene is unknown. To address this question, we have generated a vaccinia virus strain in which expression of the G1L gene is dependent on the addition of tetracycline (TET) when infection proceeds in a cell line expressing the tetracycline repressor. The vvtetOG1L virus replicated similarly to wild-type Western Reserve (WR) virus in these cells when TET was present but was arrested at a late stage in viral maturation in the absence of TET. This arrest resulted in the accumulation of 98.5% round immature virus particles compared to 6.9% at a similar time point when TET was present. Likewise, the titer of infectious virus progeny decreased by 98.9% +/- 0.97% when the vvtetOG1L virus was propagated in the absence of TET. Mutant virus replication was partially rescued by plasmid-encoded G1L, but not by G1L containing an HXXEH motif mutated to RXXQR. Modeling of G1L revealed a predicted structural similarity to the alpha-subunit of Saccharomyces cerevisiae mitochondrial processing peptidase (alpha-MPP). The HXXEH motif of G1L perfectly overlaps the HXXDR motif of alpha-MPP in this model. These results demonstrate that G1L is essential for virus maturation and suggest that G1L is a metalloproteinase with structural homology to alpha-MPP. However, no obvious effects on the expression and processing of the vaccinia virus major core proteins were observed in the G1L conditional mutant in the absence of TET compared to results for the TET and wild-type WR controls, suggesting that G1L activity is required after this step in viral morphogenesis.