蛋白质微阵列生产用琼脂糖修饰玻片制备的条件优化

目的:建立一种以琼脂糖修饰的玻片为载体的蛋白质微阵列制备的优化方法,比较琼脂糖修饰玻片和醛基修饰玻片及氨基修饰玻片对蛋白质固定效率的优劣。方法:将羊IgG固定在载体表面,经过洗涤、封闭,再加入Cy3标记的兔抗羊IgG,孵育,洗涤后用共聚焦激光扫描仪获取图像,检测各点的荧光强度,根据荧光强度确定最佳琼脂糖浓度,最佳NaIO4浓度,最佳固定时间以及封闭时间等实验条件。结果:琼脂糖浓度为1.2％、NaIO4浓度为20mmol／L、固定时间为1h、孵育时间为45min时,蛋白质在载体上的固定效率和反应活性最高。在固定的抗体浓度相同的情况下,琼脂糖修饰玻片荧光强度是醛基修饰玻片的2.6倍,是氨基修饰玻片的9倍。结论:确立了蛋白质微阵列生产用琼脂糖修饰玻片制备的优化条件,用该优化条件制备的琼脂糖玻片更适合用于蛋白质微阵列载体。     

Fabrication of an antibody microwell array with self-adhering antibody binding protein

One of the promising methods of preparing antibody arrays is immobilizing antibodies with protein A or protein G, each of which binds specifically to the heavy chain constant (Fc) region of immunoglobulin G (IgG). In this system, antibody immobilization efficiency depends on the number of active Fc binding proteins that need to be immobilized on the surface. Here we have designed and constructed an Fc binding protein with a self-adhering ability that can be immobilized on the hydrophobic surface by simple adsorption. It consists of an Fc binding domain of protein G (G3) and hydrophobic domain of elastin (E72). Direct observation revealed its self-adhering ability on the hydrophobic surface. The enzyme-linked immunosorbent assay (ELISA) showed that it retained antibody binding ability on the surface. The antibody array model was prepared on a hydrophobic microwell glass slide with E72G3, which specifically detect the antigen with a sevenfold greater sensitivity than the G3-treated slide. These results suggest that the E72G3 is useful for simple and effective immobilization of antibodies and can be used to fabricate any immuno devices.     

Affibody protein capture microarrays: synthesis and evaluation of random and directed immobilization of affibody molecules

Affibody molecules, 58-amino acid three-helix bundle proteins directed to different targets by combinatorial engineering of staphylococcal protein A, were used as capture ligands on protein microarrays. An evaluation of slide types and immobilization strategies was performed to find suitable conditions for microarray production. Two affibody molecules, Z(Taq) and Z(IgA), binding Taq DNA polymerase and human IgA, respectively, were synthesized by solid phase peptide synthesis using an orthogonal protection scheme, allowing incorporation of selective immobilization handles. The resulting affibody variants were used for random surface immobilization (through amino groups) or oriented surface immobilization (through cysteine or biotin coupled to the side chain of Lys58). Evaluation of the immobilization techniques was carried out using both a real-time surface plasmon resonance biosensor system and a microarray system using fluorescent detection of Cy3-labeled target protein. The results from the biosensor analyses showed that directed immobilization strategies significantly improved the specific binding activity of affibody molecules. However, in the microarray system, random immobilization onto carboxymethyl dextran slides and oriented immobilization onto thiol dextran slides resulted in equally good signal intensities, whereas biotin-mediated immobilization onto streptavidin-coated slides produced slides with lower signal intensities and higher background staining. For the best slides, the limit of detection was 3 pM for IgA and 30 pM for Taq DNA polymerase.     

用氨基修饰的载玻片制作cDNA微阵列

cDNA微阵列已在基因差异表达、寻找新基因等研究方面获得广泛应用,但有关cDNA微阵列的制作,目前多采用多聚赖氨酸修饰的载玻片为探针固定载体,固定效果较差.用氨基硅烷处理的载玻片为载体制作cDNA微阵列,然后考察其固定效率、检测灵敏度、稳定性、实用性等指标.结果表明,用氨基硅烷处理的载玻片具有比多聚赖氨酸更令人满意的核酸固定效率、检测灵敏度,且稳定实用.因此,用氨基硅烷修饰的载玻片为探针固定载体制作cDNA微阵列较为理想.     

Alpha-oxo semicarbazone peptide or oligodeoxynucleotide microarrays

We describe in this paper the preparation and characterization of semicarbazide glass slides and their use for the fabrication of microarrays using site-specific alpha-oxo semicarbazone ligation. The functional density and homogeneity of the semicarbazide glass slides were optimized by analyzing the reactivity of the layer toward a synthetic glyoxylyl fluorescent probe. Oligonucleotide microarrays were prepared by site-specific immobilization of glyoxylyl oligodeoxynucleotides. The slides were directly used in the hybridization assays using fluorescence detection and displayed a significant gain in sensibility as compared to the aldehyde glass slide/amino oligodeoxynucleotide chemistry. Semicarbazide slides were also used for the immobilization of a biotinylated peptide alpha-oxo aldehyde. The peptide microarrays allowed model interaction studies with streptavidin or an anti-biotin antibody.     

An Activated GOPS‐poly‐L‐Lysine‐ Coated Glass Surface for the Immobilization of 60mer Oligonucleotides

To explore a method for enhancing the immobilization and hybridization efficiency of oligonucleotides on DNA microarrays, conventional protocols of poly‐L‐lysine coating were modified by means of surface chemistry, namely, the slides were prepared by the covalently coupling of poly‐L‐lysine to a glycidoxy‐modified glass surface. The modified slides were then used to print microarrays for the detection of the SARS coronavirus by means of 60mer oligonucleotide probes. The characteristics of the modified slides concerning immobilization efficiency, hybridization dynamics, and probe stripping cycles were determined. The improved surface exhibited high immobilization efficiency, a good quality uniformity, and satisfactory hybridization dynamics. The spotting concentration of 10 μmol/L can meet the requirements of detection; the spots were approximately 170 nm in diameter; the mean fluorescence intensity of the SARS spots were between 3.2 × 10⁴ and 5.0 × 10⁴ after hybridization. Furthermore, the microarrays prepared by this method demonstrated more resistance to consecutive probe stripping cycles. The activated GOPS‐PLL slide could undergo hybridization stripping cycles for at least three cycles, and the highest loss in fluorescence intensity was found to be only 11.9 % after the third hybridization. The modified slides using the above‐mentioned method were superior to those slides treated with conventional approaches, which theoretically agrees with the fact that modification by surface chemistry attaches the DNA covalently firmly to the slides. This protocol may have great promise in the future for application in large‐scale manufacture.     

Protein microarrays on hybrid polymeric thin films prepared by self-assembly of polyelectrolytes for multiple-protein immunoassays

We report here the development and characterization of protein microarrays fabricated on nanoengineered 3-D polyelectrolyte thin films (PET) deposited on glass slide by consecutive adsorption of polyelectrolytes via self-assembly technique. Antibodies or antigens were immobilized in the PET-coated glass slides by electrostatic adsorption and entrapment of porous structure of the 3-D polymer film and thus establishing a platform for parallel analysis. Both antigen and antibody microarrays were fabricated on the PET-coated slides, and direct and indirect immunoassays on protein microarrays for multiple-analyte detection were demonstrated. Microarrays produced on these PET-coated slides have consistent spot morphology and provide performance features needed for proteomic analysis. The protein microarrays on the PET films provide LOD as low as 6 pg/mL and dynamic ranges up to three orders of magnitude, which are wider than the protein microarrays fabricated on aldehyde and poly-L-lysine functionalized slides. The PET films constructed by self-assembly technique in aqueous solution is green chemistry based, cost-effective method to generate 3-D thin film coatings on glass surface, and the coated slide is well suited for immobilizing many types of biological molecules so that a wide variety of microarray formats can be developed on this type of slide.     

Sensitive electrochemical enzyme immunoassay microdevice based on architecture of dual ring electrodes with a sensing cavity chamber

A novel electrochemical detection architecture was investigated for enzyme immunoassay sensors. Microchips with dual-ring working and counter electrodes, and a sensing cavity chamber were made on glass slides. The glass surface of the microchip was coated by 3-aminopropyltriethoxysilane (APTES). Goat IgG, as a example, was covalently captured on APTES-modified glass surfaces through glutaraldehyde (GA) as a cross-linker. Enzyme substrate, p-aminophenyl phosphate (PAPP) was prepared by electrolysis. The enzyme conversion from home-synthetic PAPP to p-aminophenol (PAP) was examined by differential pulse voltammetry (DPV). A competitive inhibition enzyme-linked immunosorbant assay (ELISA) was designed to test the system. Experimental results demonstrate that a detection limit of 118 fg/ml of goat IgG and a dynamic range of 118 fg/ml to 1.18 ng/ml, up to five orders of magnitude could be achieved. Due to its novel architecture design and electronic detection scheme, the method can be used to fabricate portable electrochemical ELISA lab-on-chip systems. The technology could have great potential in clinical diagnostic applications.     

Optimizing the immobilization of single-stranded DNA onto glass beads

The attachment of single-stranded DNA to a solid support has many biotechnology and molecular biology applications. This paper compares different immobilization chemistries to covalently link single-stranded DNA (20 base pairs), oligo(1), onto glass beads via a 5'-amino terminal end. Immobilization methods included a one-step 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and a two-step EDC reaction to succinylated and PEG-modified glass beads. The third method used 1,4-phenylene diisothiocyanate to immobilize oligo(1) to aminopropyl glass beads. The influence of coupling buffer, oligo(1) concentration, and EDC concentration was also investigated. The one-step EDC-mediated procedure with succinylated or PEG-modified beads in 0.1 M MES buffer, pH 4.5, resulted in the highest immobilization efficiency, 82-89%. EDC concentrations greater than 50 mM and oligo(1) concentrations of 3 microg/g bead were required for effective immobilization. A complementary oligonucleotide, oligo(2), was able to hybridize to the immobilized oligo(1) with a 58% efficiency. This oligonucleotide was subsequently released at 70 degrees C. The relationship between the surface density of oligo(1) and the hybridization efficiency of the complementary oligonucleotide is described.     

Adherence of streptococci to surface-modified glass

Four types of surface-modified glass were prepared. Aminopropyl glass was prepared by alkylsilylation of glass slides with gamma-aminopropyltriethoxysilane. This glass carries primary amino groups which may be protonated at pH 7.2. Owing to the presence of both positively charged ions and hydrophobic ethoxyl groups, the glass is considered to be amphipathic. Three other types of surface-modified glass slides were prepared from aminopropyl glass by forming Schiff's bases with three aldehydes: glucose, glyoxylic acid and hexanal. The aldehyde-treated slides were subsequently reduced using sodium borohydride. Thus, the surface of the glass was rendered hydrophilic, ampholytic or hydrophobic, respectively. The adherence of two Streptococcus sanguis strains and two Streptococcus mutans strains to the surface-modified glass slides was studied. Different strains showed differences in adherence to these slides depending on their physico-chemical surface properties. For S. sanguis ATCC 10556, hydrophobic bonds seemed to be most important, while in S. mutans OMZ 176, ionic interactions made the highest contribution to adhesion. Hydrogen bonds seemed to contribute least to adherence.     

Model systems for the immunolocalisation of cis,trans abscisic acid in plant tissues

To explore the feasibility of immunolocalisation of endogenous abscisic acid (ABA), model systems were developed for testing quantitatively the sensitivity of the second antibody peroxidase/antiperoxidse (PAP) method for immunolocalisation of ABA on plant tissues. Exogenous (±)ABA was fixed to carrot sections on glass slides or to homogenised pea cotyledon material on microtitre plates, either directly by carbodiimide fixation or by glutaraldehyde fixation of ABA-protein conjugates linked through the C1 carboxyl by 1-ethyl-3(3-dimethyl-amino-propyl) carbodiimide hydrochloride (EDC). Backgrounds were decreased by including 0.1% normal goat serum in the incubations, by including 0.1% Triton X-100 as a wetter, by including glycine in the rinses after EDC fixation and by using low-pH rinses after incubation with the primary antibody. Serum antibodies recognising the peptide bond between the protein and abscisic acid were removed by preincubating the serum with acetic acid conjugated to protein. Positives were only accepted when they could be eliminated by adding an excess of ABA-protein conjugate in the primary antiserum. By using a soluble peroxidase reaction product to facilitate quantitation, the limit of reliable exogenous ABA detection was found to be only of the order of 1 pmol. For the histochemical immunolocalisation of endogenous ABA, better antisera and lower backgrounds will be required.The efficiency of fixation of exogenous ABA was determined using [³H] or [¹⁴C]ABA. When aqueous EDC or di-isopropyl carbodiimide (IPC) were used the fixation efficiency was low (up to 5%), but much higher efficiencies (up to 80%) were obtained using IPC vapour with freeze-dried material. Similarly efficient fixation of endogenous ABA in pea cotyledon material, as determined by gas chromatography-mass spectrometry analysis, was obtained using the same technique. The PAP method failed to detect fixed endogenous ABA in pea cotyledons, even though the total tissue amounts present exceeded 1 pmol, evidence that not enough of the ABA was accessible to the antibody.Abbreviations ABA abscisic acid - ACE-ALP acetic acid-alkaline phosphatase - EDC 1-ethyl-3(3-dimethyl-amino-propyl) carbodiimide hydrochloride - GC-MS gas chromatographymass spectrometry - IgG Immunoglobulin G - HSA humanserum albumin - IPC dinsopropyl carbodiimide - LINK goat anti-rabbit IgG - OD optical density - PAP peroxidase/rabbit antiperoxidase complex     

Functionalization of poly(methyl methacrylate) (PMMA) as a substrate for DNA microarrays

A chemical procedure was developed to functionalize poly(methyl methacrylate) (PMMA) substrates. PMMA is reacted with hexamethylene diamine to yield an aminated surface for immobilizing DNA in microarrays. The density of primary NH₂ groups was 0.29 nmol/cm². The availability of these primary amines was confirmed by the immobilization of DNA probes and hybridization with a complementary DNA strand. The hybridization signal and the hybridization efficiency of the chemically aminated PMMA slides were comparable to the hybridization signal and the hybridization efficiency obtained from differently chemically modified PMMA slides, silanized glass, commercial silylated glass and commercial plastic Euray™ slides. Immobilized and hybridized densities of 10 and 0.75 pmol/cm², respectively, were observed for microarrays on chemically aminated PMMA. The immobilized probes were heat stable since the hybridization performance of microarrays subjected to 20 PCR heat cycles was only reduced by 4%. In conclusion, this new strategy to modify PMMA provides a robust procedure to immobilize DNA, which is a very useful substrate for fabricating single use diagnostics devices with integrated functions, like sample preparation, treatment and detection using microfabrication and microelectronic techniques.     

A new method for straightening DNA molecules for optical restriction mapping.

We have developed an improved method of straightening DNA molecules for use in optical restriction mapping. The DNA was straightened on 3-aminopropyltriethoxysilane-coated glass slides using surface tension generated by a moving meniscus. In our method the meniscus motion was controlled mechanically, which provides advantages of speed and uniformity of the straightened molecules. Variation in the affinity of the silanized surfaces for DNA was compensated by precoating the slide with single-stranded non-target blocking DNA. A small amount of MgCl2 added to the DNA suspension increased the DNA-surface affinity and was necessary for efficient restriction enzyme digestion of the straightened surface-bound DNA. By adjusting the amounts of blocking DNA and MgCl2, we prepared slides that contained many straight parallel DNA molecules. Straightened lambda phage DNA (48 kb) bound to a slide surface was digested by EcoRI restriction endonuclease, and the resulting restriction fragments were imaged by fluorescence microscopy using a CCD camera. The observed fragment lengths showed excellent agreement with their predicted lengths.     

Scanning Electron Microscopy of Pine Seedling Wood Tissue Sections Inoculated with the Pinewood Nematode Bursaphelenchus xylophilus Previously Prepared for Light Microscopy

Scanning electron microscopy (SEM) was applied to paraffin-embedded wood sections to study the histopathology of pine seedlings inoculated with the pinewood nematode (PWN), Bursaphelenchus xylophilus. The sections, which had been previously prepared and observed by light microscopy (LM) on glass slides, were originally obtained from experiments in which pine seedlings had been inoculated with PWN. The cover glass was removed by soaking the glass slide in xylene for 3 to 5 days. The glass slides were cut into small pieces so that each piece contained one wood section. Each piece of the glass slide was attached with double adhesive tape to an aluminum stub. The specimens were sputter-coated with gold and examined with a scanning electron microscope (JEOL-JSM 5200). Compared to LM (as documented in previous reports) SEM provided greater depth of focus and resolution of the damaged wood tissues, nematodes and associated bacteria. SEM made it possible to observe the relationship between bacterial distribution and nematode distribution in wood tissues. SEM observations also suggested the possibility of documenting the death of ray cells and other parenchyma cells in relation to disease development. Finally, the current study of PWN in pine seedlings demonstrated that glass slides prepared for LM observations more than 25 years earlier could be successfully processed for examination by SEM.     

Robust and efficient synthetic method for forming DNA microarrays

The field of DNA microarray technology has necessitated the cooperative efforts of interdisciplinary scientific teams to achieve its primary goal of rapidly measuring global gene expression patterns. A collaborative effort was established to produce a chemically reactive surface on glass slide substrates to which unmodified DNA will covalently bind for improvement of cDNA microarray technology. Using the p-aminophenyl trimethoxysilane (ATMS)/diazotization chemistry that was developed, microarrays were fabricated and analyzed. This immobilization method produced uniform spots containing equivalent or greater amounts of DNA than commercially available immobilization techniques. In addition, hybridization analyses of microarrays made with ATMS/diazotization chemistry showed very sensitive detection of the target sequence, two to three orders of magnitude more sensitive than the commercial chemistries. Repeated stripping and re-hybridization of these slides showed that DNA loss was minimal, allowing multiple rounds of hybridization. Thus, the ATMS/diazotization chemistry facilitated covalent binding of unmodified DNA, and the reusable microarrays that were produced showed enhanced levels of hybridization and very low background fluorescence.     

Utility of 2-D and 3-D virtual microscopy in cervical cytology education and testing

OBJECTIVE: To evaluate the effectiveness of 3-D vs. 2-D virtual microscopy as adjuncts to education and assessment in cervical cytology. STUDY DESIGN: Five cervical cytology slides were acquired in 2-D; then the identical area of the slide was acquired in 3-D, resulting in 2 sets of virtual slides for comparison with the original glass slide. Seventy-nine paid volunteer cytologists and cytotechnology students participated. Approximately half were sent the 2-D set of slides via the Web, and the others a 3-D set of slides on a DVD. Evaluators examined the virtual slides and committed to an interpretation. After receipt of the original glass slides, a second interpretation was made, if different from the virtual slide interpretation. RESULTS: Diagnostic accuracy using virtual cytology slides was similar to that for glass slides (94% vs. 96%). There was no difference in diagnostic accuracy between 2-D and 3-D slides (p = 0.28); however, the ability to focus 3-D slides in the z-axis was strongly endorsed by the participants because of the uncertainty and frustration of having some cells out of focus on 2-D virtual slides. CONCLUSION: There was consensus that virtual cervical cytology slides would be a useful augmentation to education and testing.     

Improving protein array performance: focus on washing and storage conditions

For protein microarrays, maintaining protein stability during the slide processing steps of washing, drying, and storage is of major concern. Although several studies have focused on the stability of immobilized antibodies in antibody microarrays, studies on protein-protein interaction arrays and enzyme arrays are lacking. In this paper we used five bait-prey protein interaction pairs and three enzymes to optimize the washing, drying, and storage conditions for protein arrays. The protein arrays for the study were fabricated by combining HaloTag technology and cell-free protein expression. The HaloTag technology, in combination with cell-free expression, allowed rapid expression and immobilization of fusion proteins on hydrogel-coated glass slides directly from cell extracts without any prior purification. Experimental results indicate enzyme captured on glass slides undergoes significant loss of activity when washed and spin-dried using only phosphate buffer, as is typically done with antibody arrays. The impact of washing and spin-drying in phosphate buffer on protein-protein interaction arrays was minimal. However, addition of 5% glycerol to the wash buffer helps retain enzyme activity during washing and drying. We observed significant loss of enzyme activity when slides were stored dry at 4 degrees C, however immobilized enzymes remained active for 30 days when stored at -20 degrees C in 50% glycerol. We also found that cell-free extract containing HaloTag-fused enzymes could undergo multiple freeze/thaw cycles without any adverse impact on enzyme activity. The findings indicate that for large ongoing studies, proteins of interest expressed in cell-free extract can be stored at -70 degrees C and repeatedly used to print small batches of protein array slides to be used over a few weeks.     

蛋白质微阵列检测抗原-抗体相互作用

为了制备蛋白质微阵列和研究芯片表面抗原-抗体的相互作用,研究了如何在玻片表面固化蛋白质和用荧光染料（Cy3,Cy5）对蛋白质进行标记.结果表明,在醛基修饰的玻璃表面,通过共价偶联的方法将抗原或抗体固定到芯片表面,能使二者保持其特异性结合能力.同时,荧光标记后的抗原或抗体仍然具有特异性结合能力.蛋白质微阵列是通过机械手在玻片表面排阵制作的.芯片上的荧光信号获取采用了激光共焦荧光扫描系统.用不同浓度的抗原探针阵列,对其相应的抗体靶分子的特异性结合进行了分析和研究.此外,还通过在玻片表面固定兔IgG和固定鼠IgG,对羊抗兔和羊抗鼠抗体与其相应抗原的特异性相互作用进行了检测.     

Developing site-specific immobilization strategies of peptides in a microarray

In peptide-based microarrays, most existing methods do not allow for site-specific immobilization of peptides on the glass surface. We have developed two new approaches for site-specific immobilization of kinase substrates onto glass slides: (1) slides were functionalized with avidin for attachment of biotinylated peptides; and (2) slides were functionalized with thioester for attachment of N-terminally cysteine-containing peptides via a native chemical ligation reaction.     

Functional glass surface displaying a glutamyl donor substrate for transglutaminase-mediated protein immobilization

A chemically modified glass surface displaying a glutamyl donor substrate peptide (Z-QG) was developed for microbial transglutaminase (MTG)-mediated immobilization of recombinant proteins tagged with an MTG-reactive lysine-containing substrate peptide (K-tag). To evaluate the surface modification conditions affecting the enzymatic protein immobilization, we employed an amino-modified 96-well glass plate as a base and prepared three types of glass surfaces displaying Z-QG. Validation of the Z-QG modified glass surfaces with recombinant enhanced green fluorescent proteins revealed that the insertion of a di(ethylene glycol) linker between the terminal Z-QG moiety and the base not only enhances enzymatic protein immobilization efficiency but also decreases nonselective protein adsorption. A bacterial alkaline phosphatase fused with a K-tag at the N terminus was also successfully immobilized to the designed glass surface, suggesting that the chemically modified glass surface displaying a spatially controlled glutamyl donor substrate is a potential platform for MTG-mediated fabrication of protein-based solid biomaterials.