Characterization of pURB500 from the archaeon Methanococcus maripaludis and construction of a shuttle vector.

The complete sequence of the 8,285-bp plasmid pURB500 from Methanococcus maripaludis C5 was determined. Sequence analysis identified 18 open reading frames as well as two regions of potential iterons and complex secondary structures. The shuttle vector, pDLT44, for M. maripaludis JJ was constructed from the entire pURB500 plasmid and pMEB.2, an Escherichia coli vector containing a methanococcal puromycin-resistance marker (P. Gernhardt, O. Possot, M. Foglino, L. Sibold, and A. Klein, Mol. Gen. Genet. 221:273-279, 1990). By using polyethylene glycol transformation, M. maripaludis JJ was transformed at a frequency of 3.3 x 10(7) transformants per microg of pDLT44. The shuttle vector was stable in E. coli under ampicillin selection but was maintained at a lower copy number than pMEB.2. Based on the inability of various restriction fragments of pURB500 to support maintenance in M. maripaludis JJ, multiple regions of pURB500 were required. pDLT44 did not replicate in Methanococcus voltae.     

Expression vectors for Methanococcus maripaludis: overexpression of acetohydroxyacid synthase and beta-galactosidase.

A series of integrative and shuttle expression vectors was developed for use in Methanococcus maripaludis. The integrative expression vectors contained the Methanococcus voltae histone promoter and multiple cloning sites designed for efficient cloning of DNA. Upon transformation, they can be used to overexpress specific homologous genes in M. maripaludis. When tested with ilvBN, which encodes the large and small subunits of acetohydroxyacid synthase, transformants possessed specific activity 13-fold higher than that of the wild type. An expression shuttle vector, based on the cryptic plasmid pURB500 and the components of the integrative vector, was also developed for the expression of heterologous genes in M. maripaludis. The beta-galactosidase gene from Escherichia coli was expressed to approximately 1% of the total cellular protein using this vector. During this work, the genes for the acetohydroxyacid synthase (ilvBN) and phosphoenolpyruvate synthase (ppsA) were sequenced from a M. maripaludis genomic library.     

A database of recombinant viruses and recombinant viral vectors available from the RIKEN DNA bank

BACKGROUND: Viral vectors are required as gene-delivery systems for gene therapy and basic research. Recombinant adenoviruses (rAds) expressing genes of interest are being developed as research tools and many studies in vitro and in vivo have already been performed with such rAds. METHODS: Shuttle vectors for rAds were constructed with full-length cDNAs and rAds were generated in HEK293 cells by the COS-TPC method. The rAds and shuttle vectors were developed by the Japanese research community and deposited in the RIKEN DNA Bank (RDB; http://www.brc.riken.jp/lab/dna/en/) for distribution to the scientific community. The Recombinant Virus Database (RVD; http://www.brc.riken.jp/lab/dna/rvd/) was established at the RIKEN BioResource Center (BRC) in Japan as the source of information about and distribution of the various resources. RESULTS: The RIKEN BRC is releasing more than 300 recombinant viruses (RVs) and 500 shuttle vectors, as well as all related information, which is included in a newly established database, the RVD. The RVD consists of (i) information about the RVs, the inserted cDNAs and the shuttle vectors; (ii) data about sequence-tagged sites (STSs) that are markers of viral DNAs; and (iii) experimental protocols for the use of RVs. CONCLUSIONS: The new database and available resources should be very useful to scientists who are studying human gene therapy and performing related basic research. It is a web-interfaced flat-file database that can be accessed through the internet. Moreover, all of the resources deposited in the RDB, which is a public facility in Japan, are available to researchers around the world.     

Analysis of the dibenzothiophene metabolic pathway in a newly isolated Rhodococcus spp.

We previously described the construction and characterization of Escherichia coli–Francisella tularensis shuttle vectors, derived from the cryptic Francisella plasmid pFNL10, for the genetic manipulation of F. tularensis ssp. tularensis . We now report further characterization of the biology of these shuttle vectors and the development of a new generation of Francisella plasmids. We show that the addition of ORF3 from pFNL10 can convert an unstable shuttle vector into a stable one, and that this is likely due to increased plasmid copy number. We also describe various improvements to the earlier generations of shuttle vectors, such as the addition of a multiple cloning site containing a novel RsrII restriction endonuclease site for directional insertion of Francisella genes, and the inclusion of the F. tularensis blaB promoter for heterologous gene expression.     

pZ402, an improved SV40-based shuttle vector containing a T-antigen mutant unable to interact with wild-type p53

Shuttle vectors are useful tools for studying DNA replication and mutagenesis. SV40-based shuttle vectors are popular because of their ease of use and quick results. However, one complication with the use of SV40-based shuttle vectors is the interaction of cellular p53 protein with the T-antigen of SV40. Wild-type, but not mutant, p53 has been shown to be involved in DNA replication and DNA repair. To address this concern, we have modified an SV40-based shuttle vector, pZ189, by exchanging the wt T-antigen for a mutant SV40 T-antigen, which is unable to bind with p53. This shuttle vector, pZ402, provides us with a tool to study DNA replication and genomic instability in cells with varying genetic backgrounds without interference from the interaction of T-antigen with p53.     

Two versatile shuttle vectors for Thermus thermophilus-Escherichia coli containing multiple cloning sites, lacZα gene and kanamycin or hygromycin resistance marker

Two versatile shuttle vectors for Thermus thermophilus and Escherichia coli were developed on the basis of the T. thermophilus cryptic plasmid pTT8 and E. coli vector pUC13. These shuttle vectors, pTRK1T and pTRH1T, carry a gene encoding a protein homologous to replication protein derived from pTT8, a replicon for E. coli, new multiple cloning sites and a lacZα gene from E. coli vector pUC13, and also have a gene encoding a thermostable protein that confers resistance to kanamycin or hygromycin, which can be used as a selection marker in T. thermophilus. These shuttle vectors are useful to develop enzymes and proteins of biotechnological interest. We also constructed a plasmid, pUC13T, which carries the same multiple cloning sites of pTRK1T and pTRH1T. These vectors should facilitate cloning procedures both in E. coli and T. thermophilus.     

Neomycin resistance as a selectable marker in Methanococcus maripaludis.

We cloned the aminoglycoside phosphotransferase genes APH3'I and APH3'II between the Methanococcus voltae methyl reductase promoter and terminator in a plasmid containing a fragment of Methanococcus maripaludis chromosomal DNA. The resulting plasmids encoding neomycin resistance transformed M. maripaludis at frequencies similar to those observed for pKAS102 encoding puromycin resistance. The antibiotic geneticin was not inhibitory to M. maripaludis.     

Shuttle cloning vectors for the cyanobacterium Anacystis nidulans.

Hybrid plasmids capable of acting as shuttle cloning vectors in Escherichia coli and the cyanobacterium Anacystis nidulans R2 were constructed by in vitro ligation. DNA from the small endogenous plasmid of A. nidulans was combined with two E. coli vectors, pBR325 and pDPL13, to create vectors containing either two selectable antibiotic resistance markers or a single marker linked to a flexible multisite polylinker. Nonessential DNA was deleted from the polylinker containing plasmid pPLAN B2 to produce a small shuttle vector carrying part of the polylinker (pCB4). The two polylinker-containing shuttle vectors, pPLAN B2 and pCB4, transform both E. coli and A. nidulans efficiently and provide seven and five unique restriction enzyme sites, respectively, for the insertion of a variety of DNA fragments. The hybrid plasmid derived from pBR325 (pECAN1) also transforms both E. coli and A. nidulans, although at a lower frequency, and contains two unique restriction enzyme sites.     

Trypanosomatid shuttle vectors: new tools for the functional dissection of parasite genomes

In the past five years, gene-transfer systems have been established for each of the medically important trypanosomatids: Leishmania sp, Trypanosoma brucei and T. cruzi. Transformation can be mediated by integration, which occurs exclusively by homologous recombination, or by episomal shuttle vectors. In this article, John Kelly will focus on recent progress in the development and applications of trypanosomatid shuttle vectors, ie. vectors which are maintained extrachromosomally and which are capable of autonomous replication in both trypanosomatid and bacterial hosts.     

Genetic tools for <Emphasis Type="Italic">Sulfolobus</Emphasis> spp.: vectors and first applications

Sulfolobus species belong to the best-studied archaeal organisms but have lacked powerful genetic methods. Recently, there has been considerable progress in the field of Sulfolobus genetics. Urgently needed basic genetic tools, such as targeted gene knockout techniques and shuttle vectors are being developed at an increasing pace. For S. solfataricus knockout systems as well as different shuttle vectors are available. For the genetically more stable S. acidocaldarius shuttle vectors have been recently developed. In this review we summarize the currently available genetic tools and methods for the genus Sulfolobus. Different transformation protocols are discussed, as well as all so far developed knockout systems and Sulfolobus-Escherichia coli shuttle vectors are summarized. Special emphasis is put on the important vector components, i.e., selectable markers and Sulfolobus replicons. Additionally, the information gathered on different Sulfolobus strains with respect to their use as recipient strains is reviewed. The advantages and disadvantages of the different systems are discussed and aims for further improvement of genetic systems are identified.     

Construction and characterization of shuttle vectors for succinic acid-producing rumen bacteria

Shuttle vectors carrying the origins of replication that function in Escherichia coli and two capnophilic rumen bacteria, Mannheimia succiniciproducens and Actinobacillus succinogenes, were constructed. These vectors were found to be present at ca. 10 copies per cell. They were found to be stably maintained in rumen bacteria during the serial subcultures in the absence of antibiotic pressure for 216 generations. By optimizing the electroporation condition, the transformation efficiencies of 3.0 x 10(6) and 7.1 x 10(6) transformants/mug DNA were obtained with M. succiniciproducens and A. succinogenes, respectively. A 1.7-kb minimal replicon was identified that consists of the rep gene, four iterons, A+T-rich regions, and a dnaA box. It was found that the shuttle vector replicates via the theta mode, which was confirmed by sequence analysis and Southern hybridization. These shuttle vectors were found to be suitable as expression vectors as the homologous fumC gene encoding fumarase and the heterologous genes encoding green fluorescence protein and red fluorescence protein could be expressed successfully. Thus, the shuttle vectors developed in this study should be useful for genetic and metabolic engineering of succinic acid-producing rumen bacteria.     

Large-scale analysis of adeno-associated virus vector integration sites in normal human cells

The integration sites of viral vectors used in human gene therapy can have important consequences for safety and efficacy. However, an extensive evaluation of adeno-associated virus (AAV) vector integration sites has not been completed, despite the ongoing use of AAV vectors in clinical trials. Here we have used a shuttle vector system to isolate and analyze 977 unique AAV vector-chromosome integration junctions from normal human fibroblasts and describe their genomic distribution. We found a significant preference for integrating within CpG islands and the first 1 kb of genes, but only a slight overall preference for transcribed sequences. Integration sites were clustered throughout the genome, including a major preference for integration in ribosomal DNA repeats, and 13 other hotspots that contained three or more proviruses within a 500-kb window. Both junctions were localized from 323 proviruses, allowing us to characterize the chromosomal deletions, insertions, and translocations associated with vector integration. These studies establish a profile of insertional mutagenesis for AAV vectors and provide unique insight into the chromosomal distribution of DNA strand breaks that may facilitate integration.     

Genetics in methanogens: transposon insertion mutagenesis of a Methanococcus maripaludis nifH gene.

We designed a transposon insertion mutagenesis system for Methanococcus species and used it to make mutations in and around a nifH gene in Methanococcus maripaludis. The transposon Mudpur was constructed with a gene for puromycin resistance that is expressed and selectable in Methanococcus species. A 15.6-kb nifH region from M. maripaludis cloned in a lambda vector was used as a target for mutagenesis. A series of 19 independent Mudpur insertions spanning the cloned region were produced. Four mutagenized clones in and around nifH were introduced by transformation into M. maripaludis, where each was found to replace wild-type genomic DNA with the corresponding transposon-mutagenized DNA. Wild-type M. maripaludis and a transformant containing a Mudpur insertion upstream of nifH grew on N2 as a nitrogen source. Two transformants with insertions in nifH and one transformant with an insertion downstream of nifH did not grow on N2. The transposon insertion-gene replacement technique should be generally applicable in the methanococci for studying the effects of genetic manipulations in vivo.     

SV40-based shuttle viruses

We summarize in this paper the advantages of the shuttle virus system. These SV40-based vectors exhibit the unique properties of being packaged as SV40 pseudo-virions and of being able to infect host cells. Using these transient vectors, we show that their replication can be regulated in some monkey cell lines, in such a way that either low or very high amounts of plasmid DNA can be obtained. The stability of these infectious shuttle vectors in different conditions is analyzed by rescuing them in E. coli, using various gene mutation targets. Moreover, we describe a new series of vectors which can be produced as single-stranded DNA in bacteria. They allow the transfection of a plasmid genome into mammalian cells, as either single-stranded or double-stranded DNA.     

Versatile shuttle cloning vectors for the unicellular cyanobacterium Anacystis nidulans R2

Abstract 3 new shuttle cloning vectors for gene transfer into Escherichia coli and Anacystis nidulans have been constructed by utilizing the cyanobacterial origin of replication of the small plasmid pANS from A. nidulans . 2 of these new vectors, pXB7 (pDPL13 derivative) and pECAN8 (pUC8 derivative), convey ampicillin resistance, and transform A. nidulans with relatively high frequencies. Vector pXB7 has 10 unique cloning sites; pECAN8 contains 4 cloning sites within the lacZ gene permitting rapid detection of DNA inserts in the presence of Xgal. The third vector, pKBX, has a lower transformation frequency but adds kanamycin resistance as a selectable gene for shuttle vectors of cyanobacteria.     

Construction of pRES18 and pRES19, Streptomyces-Escherichia coli shuttle vectors carrying multiple cloning sites

Abstract We developed two Streptomyces-Escherichia coli shuttle vectors. The plasmid pRES102, consisting of the essential region of pRES1 and the thiostrepton resistance gene ( tsr ) fragment of pIJ702, was combined with the E. coli plasmid vector pUC18 or pUC19. The resulting shuttle vectors, designated pRES18 and pRES19, respectively, have relatively compact size (6.25 kb), low copy number, multiple cloning sites reciprocally arranged in opposite directions, and selection markers for both Streptomyces ( tsr ) and E. coli (β-lactamase ( bla ) and β-galactosidase ( lacZ )). These shuttle vectors are capable of carrying DNA fragments as long as 10 kb, of being maintained in S. griseus, S. lavendulae and S. lividans , and are compatible with pIJ702.     

SV40-based shuttle viruses

We summarize in this paper the advantages of the shuttle virus system. These SV40-based vectors exhibit the unique properties of being packaged as SV40 pseudo-virions and of being able to infect host cells. Using these transient vectors, we show that their replication can be regulated in some monkey cell lines, in such a way that either low or very high amounts of plasmid DNA can be obtained. The stability of these infectious shuttle vectors in different conditions is analyzed by rescuing them in E. coli, using various gene mutation targets. Moreover, we describe a new series of vectors which can be produced as single-stranded DNA in bacteria. They allow the transfection of a plasmid genome into mammalian cells, as either single-stranded or double-stranded DNA.     

Cryptic plasmids isolated from Campylobacter strains represent multiple, novel incompatibility groups

Three small, cryptic plasmids from the multi-drug-resistant (MDR) Campylobacter coli strain RM2228 and one small, cryptic plasmid from the MDR Campylobacter jejuni strain RM1170 were sequenced and characterized. pCC2228-1 has some similarity to Firmicutes RepL family plasmids that replicate via a rolling-circle mechanism. pCC2228-2 is a theta-replicating, iteron-containing plasmid (ICP) that is a member of the same incompatibility (Inc) group as previously described Campylobacter shuttle vectors. The other two ICPs, pCC2228-3 and pCJ1170, represent a second novel Inc group. Comparison of the four plasmids described in this study with other characterized plasmids from C. jejuni, C. coli, C. lari, and C. hyointestinalis suggests that cryptic plasmids in Campylobacter may be classified into as many as nine Inc groups. The plasmids characterized in this study have several unique features suitable for the construction of novel Campylobacter shuttle vectors, e.g., small size, absence of many common multiple-cloning site restriction sites, and Inc groups not represented by current Campylobacter shuttle plasmids. Thus, these plasmids may be used to construct a new generation of Campylobacter shuttle vectors that would permit transformation of environmental Campylobacter isolates with an existing repertoire of native plasmids.     

Functional conservation between the argininosuccinate lyase of the archaeon Methanococcus maripaludis and the corresponding bacterial and eukaryal genes

The argH gene encoding argininosuccinate lyase (ASL) of Methanococcus maripaludis was cloned on a 4.7-kb HindIII genomic fragment. The gene is preceded by a short open reading frame (ORF149), which encodes a polypeptide with an unknown function. The two genes are co-transcribed. The ASL of M. maripaludis shares a high amino acid identity with ASLs from both bacterial and eukaryal origins and was able to complement both an argH Escherichia coli mutant and an arg4 yeast mutant, showing its extraordinary evolutionary conservation. Attempts to create an argH auxotroph of M. maripaludis by disrupting the genomic allele were unsuccessful: although a knockout allele of argH was integrated into the M. maripaludis chromosome by homologous recombination, the intact copy was not excluded, suggesting that the argH gene is essential.