Urea denaturation of alpha-hemolysin pore inserted in planar lipid bilayer detected by single nanopore recording: loss of structural asymmetry

The aim of this work is to study pore protein denaturation inside a lipid bilayer and to probe current asymmetry as a function of the channel conformation. We describe the urea denaturation of alpha-hemolysin channel and the channel formation of alpha-hemolysin monomer incubated with urea prior to insertion into a lipid bilayer. Analysis of single-channel recordings of current traces reveals a sigmoid curve of current intensity as a function of urea concentration. The normalized current asymmetry at 29+/-4% is observed between 0 and 3.56M concentrations and vanishes abruptly down to 0 concentration exceeds 4M. The loss of current asymmetry through alpha-hemolysin is due to the denaturation of the channel's cap. We also show that the alpha-hemolysin pore inserted into a lipid bilayer is much more resistant to urea denaturation than the alpha-hemolysin monomer in solution: The pore remains in the lipid bilayer up to 7.2M urea. The pore formation is possible up to 4.66M urea when protein monomers were previously incubated in urea.     

Ion channels and bacterial infection: the case of beta-barrel pore-forming protein toxins of Staphylococcus aureus

Staphylococcus aureus strains causing human pathologies produce several toxins, including a pore-forming protein family formed by the single-component alpha-hemolysin and the bicomponent leukocidins and gamma-hemolysins. The last comprise two protein elements, S and F, that co-operatively form the active toxin. alpha-Hemolysin is always expressed by S. aureus strains, whereas bicomponent leukotoxins are more specifically involved in a few diseases. X-ray crystallography of the alpha-hemolysin pore has shown it is a mushroom-shaped, hollow heptamer, almost entirely consisting of beta-structure. Monomeric F subunits have a very similar core structure, except for the transmembrane stem domain which has to refold during pore formation. Large deletions in this domain abolished activity, whereas shorter deletions sometimes improved it, possibly by removing some of the interactions stabilizing the folded structure. Even before stem extension is completed, the formation of an oligomeric pre-pore can trigger Ca(2+)-mediated activation of some white cells, initiating an inflammatory response. Within the bicomponent toxins, gamma-hemolysins define three proteins (HlgA, HlgB, HlgC) that can generate two toxins: HlgA+HlgB and HlgC+HlgB. Like alpha-hemolysin they form pores in planar bilayers with similar conductance, but opposite selectivity (cation instead of anion) for the presence of negative charges in the ion pathway. gamma-Hemolysin pores seem to be organized as alpha-hemolysin, but should contain an even number of each component, alternating in a 1:1 stoichiometry.     

A covalent S-F heterodimer of leucotoxin reveals molecular plasticity of beta-barrel pore-forming toxins

Staphylococcal leucotoxins, leucocidins, and gamma-hemolysins are bicomponent beta-barrel pore-forming toxins (beta-PFTs). Their production is associated with several clinical diseases. They have cytotoxic activity due to the synergistic action of a class S component and a class F component, which are secreted as water-soluble monomers and form hetero-oligomeric transmembrane pores, causing the lysis of susceptible cells. Structural information is currently available for the monomeric S and F proteins and the homoheptamer formed by the related alpha-hemolysin. These structures illustrate the start and end points in the mechanistic framework of beta-PFT assembly. Only limited structural data exist for the intermediate stages, including hetero-oligomeric complexes of leucotoxins. We investigated the protein-protein interactions responsible for maintaining the final bipartite molecular architecture and describe here the high-resolution crystal structure and low-resolution solution structure of a site-specific cross-linked heterodimer of gamma-hemolysin (HlgA T28C-HlgB N156C), which were solved by X-ray crystallography and small angle X-ray scattering, respectively. These structures reveal a molecular plasticity of beta-PFTs, which may facilitate the transition from membrane-bound monomers to heterodimers.     

The structure of a Staphylococcus aureus leucocidin component (LukF-PV) reveals the fold of the water-soluble species of a family of transmembrane pore-forming toxins.

BACKGROUND: Leucocidins and gamma-hemolysins are bi-component toxins secreted by Staphylococcus aureus. These toxins activate responses of specific cells and form lethal transmembrane pores. Their leucotoxic and hemolytic activities involve the sequential binding and the synergistic association of a class S and a class F component, which form hetero-oligomeric complexes. The components of each protein class are produced as non-associated, water-soluble proteins that undergo conformational changes and oligomerization after recognition of their cell targets. RESULTS: The crystal structure of the monomeric water-soluble form of the F component of Panton-Valentine leucocidin (LukF-PV) has been solved by the multiwavelength anomalous dispersion (MAD) method and refined at 2.0 A resolution. The core of this three-domain protein is similar to that of alpha-hemolysin, but significant differences occur in regions that may be involved in the mechanism of pore formation. The glycine-rich stem, which undergoes a major rearrangement in this process, forms an additional domain in LukF-PV. The fold of this domain is similar to that of the neurotoxins and cardiotoxins from snake venom. CONCLUSIONS: The structure analysis and a multiple sequence alignment of all toxic components, suggest that LukF-PV represents the fold of any water-soluble secreted protein in this family of transmembrane pore-forming toxins. The comparison of the structures of LukF-PV and alpha-hemolysin provides some insights into the mechanism of transmembrane pore formation for the bi-component toxins, which may diverge from that of the alpha-hemolysin heptamer.     

Three-dimensional model of the pore form of anthrax protective antigen. Structure and biological implications

Although pore formation by protective antigen (PA) is critical to cell intoxication by anthrax toxin (AT), the structure of the pore form of PA (the PA63 pore) has not been determined. Hence, in this study, the PA63 pore was modeled using the X-ray structures of monomeric PA and heptameric alpha-hemolysin (alpha-HL) as templates. The PA63 pore model consists of two weakly associated domains, namely the cap and stem domains. The ring-like cap domain has a length of 80 A and an outside diameter of 120 A, while the cylinder-like stem domain has a length of 100 A and outside diameter of approximately 28 A. This provides the PA63 pore model with a length of 180 A. Based on experimental results, the channel in the PA63 pore model was built to have a minimum diameter of ~12 A, depending on side chain conformations. Because of its large size and structural complexity, the all-atom model of the PA63 pore is the end-stage construction of four separate modeling projects described herein. The final model is consistent with published experimental results, including mutational analysis and channel conductance experiments. In addition, the model was energetically and hydropathically refined to optimize molecular packing within the protomers and at the protomer-protomer interfaces. By providing atomic detail to biochemical and biophysical data, the PA63 pore model may afford new insights into the binding mode of PA on the membrane surface, the prepore-pore transition, and the mechanism of cell entry by anthrax toxin.     

Arresting and releasing Staphylococcal alpha-hemolysin at intermediate stages of pore formation by engineered disulfide bonds

alpha-Hemolysin (alphaHL) is secreted by Staphylococcus aureus as a water-soluble monomer that assembles into a heptamer to form a transmembrane pore on a target membrane. The crystal structures of the LukF water-soluble monomer and the membrane-bound alpha-hemolysin heptamer show that large conformational changes occur during assembly. However, the mechanism of assembly and pore formation is still unclear, primarily because of the difficulty in obtaining structural information on assembly intermediates. Our goal is to use disulfide bonds to selectively arrest and release alphaHL from intermediate stages of the assembly process and to use these mutants to test mechanistic hypotheses. To accomplish this, we created four double cysteine mutants, D108C/K154C (alphaHL-A), M113C/K147C (alphaHL-B), H48C/ N121C (alphaHL-C), I5C/G130C (alphaHL-D), in which disulfide bonds may form between the pre-stem domain and the beta-sandwich domain to prevent pre-stem rearrangement and membrane insertion. Among the four mutants, alphaHL-A is remarkably stable, is produced at a level at least 10-fold greater than that of the wild-type protein, is monomeric in aqueous solution, and has hemolytic activity that can be regulated by the presence or absence of reducing agents. Cross-linking analysis showed that alphaHL-A assembles on a membrane into an oligomer, which is likely to be a heptamer, in the absence of a reducing agent, suggesting that oxidized alphaHL-A is halted at a heptameric prepore state. Therefore, conformational rearrangements at positions 108 and 154 are critical for the completion of alphaHL assembly but are not essential for membrane binding or for formation of an oligomeric prepore intermediate.     

alpha-Hemolysin, gamma-hemolysin, and leukocidin from Staphylococcus aureus: distant in sequence but similar in structure.

alpha-Hemolysin from Staphylococcus aureus assembles from a water-soluble, monomeric species to a membrane-bound heptamer on the surface of target cells, creating water-filled channels that lead to cell death and lysis. Staphylococcus aureus also produces the gamma-hemolysin and leukocidin toxins, which function as two component toxins in the disruption and lysis of erythrocytes and leukocytes. Analysis of the aligned sequences of alpha-hemolysin, gamma-hemolysin, and leukocidin in the context of the alpha-hemolysin heptamer structure supports the conclusion that even though the level of sequence identity between alpha-hemolysin and the gamma-hemolysin and leukocidin toxins is in the so-called twilight zone, the three-dimensional structures of the protomers are probably conserved. By analogy with alpha-hemolysin, gamma-hemolysin and leukocidin may also form oligomeric, transmembrane channels in which an antiparallel beta-barrel constitutes the primary membrane-embedded domain.     

High resolution crystallographic studies of alpha-hemolysin-phospholipid complexes define heptamer-lipid head group interactions: implication for understanding protein-lipid interactions

The alpha-hemolysin is an archetypal pore-forming protein that is secreted from Staphylococcus aureus as a water-soluble monomer. When the monomer binds to the membrane of a susceptible cell, the membrane-bound molecules assemble into the lytic heptamer. Although a bilayer or a bilayer-like environment are essential to toxin assembly, there is no high resolution information on toxin-phospholipid complexes. We have determined the structures of detergent-solubilized alpha-hemolysin heptamer bound to glycerophosphocholine or dipropanoyl glycerophosphocholine at 1.75-1.80 A resolution and 110 K. The phosphocholine head group binds to each subunit in a crevice between the rim and the stem domains. The quaternary ammonium group interacts primarily with aromatic residues, whereas the phosphodiester moiety interacts with a conserved arginine residue. These structures provide a molecular basis for understanding why alpha-hemolysin preferentially assembles on membranes comprised of phosphocholine lipids.     

Crystal structure of the monomeric porin OmpG

The outer membrane (OM) of Gram-negative bacteria contains a large number of channel proteins that mediate the uptake of ions and nutrients necessary for growth and functioning of the cell. An important group of OM channel proteins are the porins, which mediate the non-specific, diffusion-based passage of small (<600 Da) polar molecules. All porins of Gram-negative bacteria that have been crystallized to date form stable trimers, with each monomer composed of a 16-stranded beta-barrel with a relatively narrow central pore. In contrast, the OmpG porin is unique, as it appears to function as a monomer. We have determined the X-ray crystal structure of OmpG from Escherichia coli to a resolution of 2.3 A. The structure shows a 14-stranded beta-barrel with a relatively simple architecture. Due to the absence of loops that fold back into the channel, OmpG has a large ( approximately 13 A) central pore that is considerably wider than those of other E. coli porins, and very similar in size to that of the toxin alpha-hemolysin. The architecture of the channel, together with previous biochemical and other data, suggests that OmpG may form a non-specific channel for the transport of larger oligosaccharides. The structure of OmpG provides the starting point for engineering studies aiming to generate selective channels and for the development of biosensors.     

The domain-swapped dimer of cyanovirin-N is in a metastable folded state: reconciliation of X-ray and NMR structures

The structure of the potent HIV-inactivating protein cyanovirin-N was previously found by NMR to be a monomer in solution and a domain-swapped dimer by X-ray crystallography. Here we demonstrate that, in solution, CV-N can exist both in monomeric and in domain-swapped dimeric form. The dimer is a metastable, kinetically trapped structure at neutral pH and room temperature. Based on orientational NMR constraints, we show that the domain-swapped solution dimer is similar to structures in two different crystal forms, exhibiting solely a small reorientation around the hinge region. Mutation of the single proline residue in the hinge to glycine significantly stabilizes the protein in both its monomeric and dimeric forms. By contrast, mutation of the neighboring serine to proline results in an exclusively dimeric protein, caused by a drastic destabilization of the monomer.     

Refined structure of monomeric diphtheria toxin at 2.3 A resolution.

The structure of toxic monomeric diphtheria toxin (DT) was determined at 2.3 A resolution by molecular replacement based on the domain structures in dimeric DT and refined to an R factor of 20.7%. The model consists of 2 monomers in the asymmetric unit (1,046 amino acid residues), including 2 bound adenylyl 3'-5' uridine 3' monophosphate molecules and 396 water molecules. The structures of the 3 domains are virtually identical in monomeric and dimeric DT; however, monomeric DT is compact and globular as compared to the "open" monomer within dimeric DT (Bennett MJ, Choe S, Eisenberg D, 1994b, Protein Sci 3:0000-0000). Detailed differences between monomeric and dimeric DT are described, particularly (1) changes in main-chain conformations of 8 residues acting as a hinge to "open" or "close" the receptor-binding (R) domain, and (2) a possible receptor-docking site, a beta-hairpin loop protruding from the R domain containing residues that bind the cell-surface DT receptor. Based on the monomeric and dimeric DT crystal structures we have determined and the solution studies of others, we present a 5-step structure-based mechanism of intoxication: (1) proteolysis of a disulfide-linked surface loop (residues 186-201) between the catalytic (C) and transmembrane (T) domains; (2) binding of a beta-hairpin loop protruding from the R domain to the DT receptor, leading to receptor-mediated endocytosis; (3) low pH-triggered open monomer formation and exposure of apolar surfaces in the T domain, which insert into the endosomal membrane; (4) translocation of the C domain into the cytosol; and (5) catalysis by the C domain of ADP-ribosylation of elongation factor 2.     

High-resolution structure of a partially folded insulin aggregation intermediate

Insulin has long been served as a model for protein aggregation, both due to the importance of aggregation in the manufacture of insulin and because the structural biology of insulin has been extensively characterized. Despite intensive study, details about the initial triggers for aggregation have remained elusive at the molecular level. We show here that at acidic pH, the aggregation of insulin is likely initiated by a partially folded monomeric intermediate. High-resolution structures of the partially folded intermediate show that it is coarsely similar to the initial monomeric structure but differs in subtle details—the A chain helices on the receptor interface are more disordered and the B chain helix is displaced from the C-terminal A chain helix when compared to the stable monomer. The result of these movements is the creation of a hydrophobic cavity in the center of the protein that may serve as nucleation site for oligomer formation. Knowledge of this transition may aid in the engineering of insulin variants that retain the favorable pharamacokinetic properties of monomeric insulin but are more resistant to aggregation.     

Probing distance and electrical potential within a protein pore with tethered DNA

DNA molecules tethered inside a protein pore can be used as a tool to probe distance and electrical potential. The approach and its limitations were tested with alpha-hemolysin, a pore of known structure. A single oligonucleotide was attached to an engineered cysteine to allow the binding of complementary DNA strands inside the wide internal cavity of the extramembranous domain of the pore. The reversible binding of individual oligonucleotides produced transient current blockades in single channel current recordings. To probe the internal structure of the pore, oligonucleotides with 5' overhangs of deoxyadenosines and deoxythymidines up to nine bases in length were used. The characteristics of the blockades produced by the oligonucleotides indicated that single-stranded overhangs of increasing length first approach and then thread into the transmembrane beta-barrel. The distance from the point at which the DNA was attached and the internal entrance to the barrel is 43 A, consistent with the lengths of the DNA probes and the signals produced by them. In addition, the tethered DNAs were used to probe the electrical potential within the protein pore. Binding events of oligonucleotides with an overhang of five bases or more, which threaded into the beta-barrel, exhibited shorter residence times at higher applied potentials. This finding is consistent with the idea that the main potential drop is across the alpha-hemolysin transmembrane beta-barrel, rather than the entire length of the lumen of the pore. It therefore explains why the kinetics and thermodynamics of formation of short duplexes within the extramembranous cavity of the pore are similar to those measured in solution, and bolsters the idea that a "DNA nanopore" provides a useful means for examining duplex formation at the single molecule level.     

An all-atom model of the pore-like structure of hexameric VP40 from Ebola: structural insights into the monomer-hexamer transition

The matrix protein VP40 is an indispensable component of viral assembly and budding by the Ebola virus. VP40 is a monomer in solution, but can fold into hexameric and octameric states, two oligomeric conformations that play central roles in the Ebola viral life cycle. While the X-ray structures of monomeric and octameric VP40 have been determined, the structure of hexameric VP40 has only been solved by three-dimensional electron microscopy (EM) to a resolution of approximately 30 A. In this paper, we present the refinement of the EM reconstruction of truncated hexameric VP40 to approximately 20 A and the construction of an all-atom model (residues 44-212) using the EM model at approximately 20 A and the X-ray structure of monomeric VP40 as templates. The hexamer model suggests that the monomer-hexamer transition involves a conformational change in the N-terminal domain that is not evident during octamerization and therefore, may provide the basis for elucidating the biological function of VP40.     

Beta-barrel membrane protein folding and structure viewed through the lens of alpha-hemolysin

The beta-barrel is a transmembrane structural motif commonly encountered in bacterial outer membrane proteins and pore-forming toxins (PFTs). Alpha-hemolysin (alphaHL) is a cytotoxin secreted by Staphylococcus aureus that assembles from a water-soluble monomer to form a membrane-bound heptameric beta-barrel on the surface of susceptible cells, perforating the cell membranes, leading to cell death and lysis. The mechanism of heptamer assembly, which has been studied extensively, occurs in a stepwise manner, and the structures of the initial, monomeric form and final, membrane-embedded pore are known. The toxin's ability to assemble from an aqueous, hydrophilic species to a membrane-inserted oligomer is of interest in understanding the assembly of PFTs in particular and the folding and structure of beta-barrel membrane proteins in general. Here we review the structures of the monomeric and heptamer states of LukF and alphaHL, respectively, the mechanism of toxin assembly, and the relationships between alphaHL and nontoxin beta-barrel membrane proteins.     

Denaturation and reassembly of chaperonin GroEL studied by solution X-ray scattering

We measured the denaturation and reassembly of Escherichia coli chaperonin GroEL using small-angle solution X-ray scattering, which is a powerful technique for studying the overall structure and assembly of a protein in solution. The results of the urea-induced unfolding transition show that GroEL partially dissociates in the presence of more than 2 M urea, cooperatively unfolds at around 3 M urea, and is in a monomeric random coil-like unfolded structure at more than 3.2 M urea. Attempted refolding of the unfolded GroEL monomer by a simple dilution procedure is not successful, leading to formation of aggregates. However, the presence of ammonium sulfate and MgADP allows the fully unfolded GroEL to refold into a structure with the same hydrodynamic dimension, within experimental error, as that of the native GroEL. Moreover, the X-ray scattering profiles of the GroEL thus refolded and the native GroEL are coincident with each other, showing that the refolded GroEL has the same structure and the molecular mass as the native GroEL. These results demonstrate that the fully unfolded GroEL monomer can refold and reassemble into the native tetradecameric structure in the presence of ammonium sulfate and MgADP without ATP hydrolysis and preexisting chaperones. Therefore, GroEL can, in principle, fold and assemble into the native structure according to the intrinsic characteristic of its polypeptide chain, although preexisting GroEL would be important when the GroEL folding takes place under in vivo conditions, in order to avoid misfolding and aggregation.     

Dynamics and energetics of water permeation through the aquaporin channel

Structural properties of water inside bovine aquaporin-1 are investigated by molecular simulation. The calculations, which are based on the recently determined X-ray structure at 2.2 A resolution (Sui et al., Nature 2001;414:872-878), are carried out on one monomeric subunit immersed in a water-n-octane-water bilayer. Molecular dynamics (MD) simulations suggest that His182, a fully conserved residue in the channel pore, is protonated in the delta position. Furthermore, they reveal a highly ordered water structure in the channel, induced by the electrostatic properties of the protein. Multiple-steering MD simulations are used to calculate the free-energy of water diffusion. To the best of our knowledge, this represents the first free-energy calculation based on the new, high-resolution structure of the pore. The calculated barrier is 2.5 kcal/mol, and it is associated to water permeation through the Asn-Pro-Ala (NPA) region of the pore, where water molecules are only hydrogen-bonded with themselves. These findings are fully consistent with those based on the previous MD studies on the human protein (de Groot and Grubmüller, Science 2001;294:2353-2357).     

β-Barrel membrane protein folding and structure viewed through the lens of α-hemolysin

The β-barrel is a transmembrane structural motif commonly encountered in bacterial outer membrane proteins and pore-forming toxins (PFTs). α-Hemolysin (αHL) is a cytotoxin secreted by Staphylococcus aureus that assembles from a water-soluble monomer to form a membrane-bound heptameric β-barrel on the surface of susceptible cells, perforating the cell membranes, leading to cell death and lysis. The mechanism of heptamer assembly, which has been studied extensively, occurs in a stepwise manner, and the structures of the initial, monomeric form and final, membrane-embedded pore are known. The toxin's ability to assemble from an aqueous, hydrophilic species to a membrane-inserted oligomer is of interest in understanding the assembly of PFTs in particular and the folding and structure of β-barrel membrane proteins in general. Here we review the structures of the monomeric and heptamer states of LukF and αHL, respectively, the mechanism of toxin assembly, and the relationships between αHL and nontoxin β-barrel membrane proteins.     

Structural polymorphism of telomeres studied by photon correlation spectroscopy

Photon Correlation Spectroscopy (PCS) was used to study the dynamics and structure of Tetrahymena telomeric sequence d(5'-TGGGGT-3')4. Two different modes were observed, corresponding to the following structures: intermolecular (tetramolecular) G-quadruplex and intramolecular (monomeric) G-quartet. Experimental values of translational diffusion coefficients DT were obtained for each structural form. The value of DT for the monomer equals to 1.4 x 10(6) (cm2/s), while for the tetramolecular structure, to 0.8 x 10(6) (cm2/s). The relative weight concentrations of these two forms were analyzed versus the concentration of NaCl varied from 10 mM to 500 mM. The values of experimentally determined diffusion coefficients were compared with those calculated assuming the "bead model" and with the atomic coordinates from the NMR and X-ray crystallographic data. For both structures the experimental and calculated values of DT were in reasonable agreement. In the entire NaCl concentration range studied, the contribution of the relative weight concentration of the monomeric telomere form changed from 85% for 10 mM NaCl to 60% for 500 mM NaCl.     

Structural and functional analysis of the pre-pore and membrane-inserted pore of Cry1Ab toxin

Bacillus thuringiensis produces insecticidal Cry proteins that are active against different insect species. The primary action of Cry toxins is to lyse midgut epithelial cells in the target insect by forming lytic pores on the apical membrane. After interaction with cadherin receptor, Cry proteins undergo conformational changes from a monomeric structure to a pre-pore-oligomeric form that is able to interact with a second GPI-anchored aminopeptidase-N receptor and then insert into lipid membranes. Here, we review the recent advances in the understanding of the structural changes presented by Cry1Ab toxin upon membrane insertion. Based on analysis of the Trp fluorescence of pure monomeric and oligomeric Cry1Ab structures in solution and in membrane-bound state we reported that oligomerization caused 27% reduction of Trp exposed to the solvent. After membrane insertion there is another conformational change that allows an additional rearrangement of the Trp residues resulting in a total protection of these residues from exposure to the solvent. The oligomeric structure is membrane insertion competent since more than 96% of the Cry1Ab oligomer inserts into the membrane as a function of lipid:protein ratio, in contrast to the monomer of which only 5-10%, inserts into the membrane. Finally, analysis of the stability of monomeric, pre-pore and pore structures of Cry1Ab toxin after urea and thermal denaturation suggested that a more flexible conformation could be necessary for membrane insertion and this flexible structure is obtained by toxin oligomerization and by alkaline pH. Domain I is involved in the intermolecular interaction within the oligomeric Cry1Ab and this domain is inserted into the membrane in the membrane-inserted state.