Fractal nature of protein surface roughness: a note on quantification of change of surface roughness in active sites,before and after binding

Year 2010 marked the 25th year since we came to know that roughness of a protein surface has fractal symmetry. Ever since the publication of Lewis and Rees' paper, hundreds of works from a spectrum of perspectives have established that fractal dimension (FD) can be considered as a reliable marker that describes roughness of protein surface objectively. In this article, we introduce readers to the fundamentals of fractals and present categorical biophysical and geometrical reasons as to why FD‐based constructs can describe protein surface roughness more accurately. We then review the commonality (and the lack of it) between numerous approaches that have attempted to investigate protein surface with fractal measures, before exploring the patterns in the results that they have produced. Apart from presenting the genealogy of approaches and results, we present an analysis that quantifies the difference in surface roughness in stretches of protein surface containing the active site, before and after binding to ligands, to underline the utility of FD‐based measures further. It has been found that surface stretches containing the active site, in general, undergo a significant increment in its roughness after binding. After presenting the entire repertoire of FD‐based surface roughness studies, we talk about two yet‐unexplored problems where application of FD‐based techniques can help in deciphering underlying patterns of surface interactions. Finally, we list the limitations of FD‐based constructs and put down several precautions that one must take while working with them. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of surface roughness on squeeze film poroelastic bearings with special reference to synovial joints

A simplified mathematical model has been developed for understanding the combined effects of surface roughness and couple stresses on lubrication aspects of synovial joints. The modified Reynolds equation which incorporates the elastic as well as randomized surface roughness structure of cartilage with couple-stress fluid as lubricant is derived. The mean pressure, load carrying capacity and time of approach as functions of film thickness during normal articulation of joints are obtained by using Christensen stochastic theory with the assumption that the roughness asperity heights are to be small compared to the film thickness. The effects of surface roughness and elasticity are considerably pronounced for the poroelastic bearings with couple-stress fluid as lubricant compared with classical case.     

连续5年无菌体液标本中分离真菌的鉴定及药敏分析

目的回顾性调查2002-2006年华西医院住院患者无菌体液标本真菌培养的情况,分析真菌菌种及其耐药特点,为临床诊断、治疗提供参考。方法标本接种沙堡弱培养基进行分离培养,采用科马嘉念珠菌显色培养基（CHRO-Ma-gar）和API-20CAUX鉴定系统结合形态学进行菌种鉴定,使用念珠菌药敏试条（ATB-Fungus 2）对2006年来自血液标本中的真菌进行药敏试验。结果2002-2006年间检出的阳性样本数依次为7株、22株、39株、32株及57株;血液来源73株,清洁中段尿来源59株,是主要样本来源;分离真菌以白念珠菌和热带念珠菌为主,占70%以上;2006年血培养中共分离出16株念珠菌,体外药敏情况详见文中。结论临床无菌体液标本中真菌的检出率有逐年上升的趋势;菌株以白念珠菌和热带念珠菌为主,同时近平滑念珠菌、克柔念珠菌、光滑念珠菌、马尔尼菲青霉菌等菌株也有出现;样本来源以血液、清洁中段尿为主;体外药敏总体耐药率低,但是逐渐出现了对氟康唑耐药的白念珠菌和热带念珠菌,应引起高度重视。     

Effect of surface roughness on slip flows in hydrophobic and hydrophilic microchannels by molecular dynamics simulation

The influences of surface roughness on the boundary conditions for a simple fluid flowing over hydrophobic and hydrophilic surfaces are investigated by molecular dynamics (MD) simulation. The degree of slip is found to decrease with surface roughness for both the hydrophobic and hydrophilic surfaces. The flow rates measured in hydrophobic channels are larger than those in hydrophilic channels with the presence of slip velocity at the walls. The simulation results of flow rate are correlated with the theoretical predictions according to the assumption of no slip boundary condition. The slip boundary condition also strongly depends on the shear rate near the surface. For hydrophobic surfaces, apparent fluid slips are observed on smooth and rough surfaces. For simple fluids flowing over a hydrophobic surface, the slip length increases linearly with shear rate for both the smooth and rough surfaces. Alternately, the slip length has a power law dependence on the shear rate for the cases of hydrophilic surfaces. It is observed that there is a no-slip boundary condition only when shear rate is low, and partial slip occurs when it exceeds a critical level.     

Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins

doi:10.1111/j.1741‐2358.2009.00282.x
Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins Objective: The aim of this study was to assess the effect of repeated cycles of five chemical disinfectant solutions on the roughness and hardness of three hard chairside reliners. Methods: A total of 180 circular specimens (30 mm × 6 mm) were fabricated using three hard chairside reliners (Jet; n = 60, Kooliner; n = 60, Tokuyama Rebase II Fast; n = 60), which were immersed in deionised water (control), and five disinfectant solutions (1%, 2%, 5.25% sodium hypochlorite; 2% glutaraldehyde; 4% chlorhexidine gluconate). They were tested for Knoop hardness (KHN) and surface roughness (μm), before and after 30 simulated disinfecting cycles. Data was analysed by the factorial scheme (6 × 2), two‐way analysis of variance (anova ), followed by Tukey’s test. Results: For Jet (from 18.74 to 13.86 KHN), Kooliner (from 14.09 to 8.72 KHN), Tokuyama (from 12.57 to 8.28 KHN) a significant decrease in hardness was observed irrespective of the solution used on all materials. For Jet (from 0.09 to 0.11 μm) there was a statistically significant increase in roughness. Kooliner (from 0.36 to 0.26 μm) presented a statistically significant decrease in roughness and Tokuyama (from 0.15 to 0.11 μm) presented no statistically significant difference after 30 days. Conclusions: This study showed that all disinfectant solutions promoted a statistically significant decrease in hardness, whereas with roughness, the materials tested showed a statistically significant increase, except for Tokuyama. Although statistically significant values were registered, these results could not be considered clinically significant.     

模拟地表火行为对燃烧剩余物水溶性碳氮的影响

燃烧剩余物是火烧迹地土壤表面必然存在的残留物,可以通过降水过程以及地表径流释放其所含有的矿物质和有机质至土壤生态系统,从而在一定时间内持续地对火后生态系统恢复过程造成影响。但不同火行为下,相同的可燃物所产生的燃烧剩余物可能具有不同的生态学功能,为了认知火行为对燃烧剩余物的影响,进一步了解二者对火烧迹地生态恢复过程中养分循环和能量流动的潜在影响,探究了火行为对燃烧剩余物水溶性碳氮化学计量特征的影响。以红松人工林地表可燃物为实验材料,通过设置不同坡度和含水率为火行为的驱动因子,进行了森林可燃物床层地表上坡火和下坡火的室内模拟燃烧实验。用独立样本T检验、单因素方差分析、多因素方差分析探究了火环境对燃烧剩余物水溶性碳氮和火行为的影响,用基于距离的冗余分析(db-RDA)探究了火行为对燃烧剩余物水溶性碳氮化学计量特征的影响。上坡火实验组的燃烧剩余物水溶性碳氮含量明显高于下坡火实验组(P<0.01);5°实验组中,燃烧剩余物的水溶性碳含量随着可燃物预设含水率的升高而升高(P<0.05)。进一步的数据分析发现火行为与燃烧剩余物水溶性碳氮化学计量特征关系密切,火焰宽度是影响燃烧剩余物水溶性...     

Curvature-based interaction potential between a micro/nano curved surface body and a particle on the surface of the body

The interaction potential between a curved surface body and a particle located on the surface of the body is studied in this paper. Based on the negative exponential pair potential (1/R ⁿ ) between particles, the interaction potential is proved to be of the curvature-based form, i.e., it can be written as a function of curvatures of the surface. Idealized numerical experiments are designed to test the accuracy of curvature-based potential. Based on the curvature-based potential, propositions below are confirmed: a highly curved surface body will induce driving forces on the particle located on the surface, and curvatures and the gradients of curvatures are essential factors forming the driving forces. In addition, the tangent driving force acting on the particle from the curved surface body is studied. Based on duality, the following rule is proved: for a convex or concave curved body sharing the same curved surface, the curvature-based interaction potential between them and a particle on the surface can make up the potential of a particle in the whole space.     

Interfacial effect of extremely low frequency electromagnetic fields (EM-ELF) on the vaporization step of carbon dioxide from aqueous solutions of body simulated fluid (SBF)

Spontaneous processes in an aqueous solution of body simulated fluid (SBF) were monitored in closed vessel for a period of 1 month at 310 K, at atm pressure, and initial pH of 7.2, both with and without exposure to a square pulsed extremely low frequency electromagnetic fields (EM-ELF) of 250 microT, repeated at 75 Hz. The most important findings are that the SBF surface tension (gamma), evaluated under the EM-ELF field, is lower than the corresponding value measured without EM-ELF at any time. Furthermore, the pH of the exposed SBF is always more basic than that of the unexposed solution. As a consequence, when the EM-ELF is applied, calcium phosphate salts do not precipitate from the SBF solution for a period as long as 30 days. Behind all these experimental evidences there is only one mechanism: the vaporisation from the SBF-air interface of the CO(2)(aq) dissolved into the aqueous electrolyte solution. Thermodynamic analysis of these results establish that, at any given time, the difference, Delta, between the measured surface tensions with and without EM-ELF applied, gives the work of the electromagnetic forces to change the extent at which the CO(2)(aq) adsorbs at the liquid-air interface. It has been demonstrated that the work supply per second and per unit of area by the electromagnetic forces, 3.73 x 10(-10) mJ/s cm(2), is very near to the experimental slope in the plot Delta vs. t 1.7 x 10(-10) mJ/s cm(2). This leads to the conclusion that the EM-ELF fields have an interfacial effect on the concentration value of the CO(2) (aq) at the SBF-air interface. Because of that, the EM-ELF field is enhancing the CO(2) vaporisation rate; thus any other steps, which are a consequence of this mechanism, are changing. These results allow explanation of previous experiments concerning the precipitation of calcium carbonate from flowing hydrogen carbonate aqueous solution in the temperature range 353-373 K at a pressure of 0.1 MPa under the effect of static magnetic fields.     

Impacts of hydrodynamic conditions and microscale surface roughness on the critical shear stress to develop and thickness of early-stage Pseudomonas putida biofilms

Biofilms can increase pathogenic contamination of drinking water, cause biofilm-related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early-stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early-stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early-stage Pseudomonas putida biofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early-stage biofilm growth is suppressed under high flow conditions and that the local velocity for early-stage P. putida biofilms (growth time < 14 h) to develop is about 50 μm/s, which is similar to P. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early-stage biofilms by increasing the area of the low-flow region. Furthermore, we show that the critical average shear stress, above which early-stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early-stage biofilm development, characterized in this study, will facilitate future predictions and managements of early-stage P. putida biofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments.     

茶蚜体表漂洗物对天敌的引诱活性及组分分析

行为生测和触角电位反应都证明茶蚜Toxoptera aurantii体表的正己烷或乙醚漂洗物对茶蚜重要天敌中华草蛉Chysopa sinica、蚜茧蜂Aphidius sp.和七星瓢虫Coccinella septempunctata具有显著的引诱效应,正己烷漂洗物的活性稍强。GC、GC-MS分析表明正己烷漂洗物中主要组分是苯甲醛、十一烷、2, 5-己二酮、2,5-二氢噻吩、芳樟醇、萘、4-甲基-辛烷、1, 2-苯甲酸-双-（二丁基-邻苯二甲酸甲酯）、二丁基-邻苯二甲酸甲酯和二十烷,其中苯甲醛、2, 5-己二酮和芳樟醇含量稍大。乙醚漂洗物中主要组分为反-2-己烯酸、正十七烷、2,6,10,14-四甲基十五烷、二十烷、四甲基四十烷、二丁基-邻苯二甲酸酯和十九烷,前2种组分含量较大。     

Intracellular freezing, viability, and composition of fat body cells from freeze-intolerant larvae of Sarcophaga crassipalpis.

Although it is often assumed that survival of freezing requires that ice formation must be restricted to extracellular compartments, fat body cells from freeze-tolerant larvae of the gall fly, Eurosta solidaginis (Diptera, Tephritidae) survive intracellular freezing. Furthermore, these cells are highly susceptible to inoculative freezing by external ice, undergo extensive lipid coalescence upon thawing, and survive freezing better when glycerol is added to the suspension medium. To determine whether these traits are required for intracellular freeze tolerance or whether they are incidental and possessed by fat body cells in general, we investigated the capacity of fat body cells from nondiapause-destined and diapause-destined (i.e., cold-hardy) larvae of the freeze-intolerant flesh fly Sarcophaga crassipalpis (Diptera, Sarcophagidae) to survive intracellular freezing. Fat body cells from both types of larvae were highly susceptible to inoculative freezing; all cells froze between -3.7 to -6.2 degrees C. The highest rates for survival of intracellular freezing occurred at -5 degrees C. The addition of glycerol to the media markedly increased survival rates. Upon thawing, the fat body cells showed little or no lipid coalescence. Fat body cells from E. solidaginis had a water content of only 35% compared to cells from S. crassipalpis larvae that had 52-55%; cells with less water may be less likely to be damaged by mechanical forces during intracellular freezing.     

Effect of adding nano‐titanium dioxide on the microstructure,mechanical properties and in vitro bioactivity of a freeze cast merwinite scaffold

In the present research, merwinite (M) scaffolds with and without nano‐titanium dioxide (titania) were synthesized by water‐based freeze casting method. Two different amounts (7.5 and 10 wt%) of n‐TiO₂ were added to M scaffolds. They were sintered at temperature of 1573.15°K and at cooling rate of 4°K/min. The changes in physical and mechanical properties were investigated. The results showed that although M and M containing 7.5 wt% n‐TiO₂ (MT7.5) scaffolds had approximately the same microstructures in terms of pore size and wall thickness, these factors were different for sample MT10. In overall, the porosity, volume and linear shrinkage were decreased by adding different weight ratios of n‐TiO₂ into the M structure. According to the obtained mechanical results, the optimum mechanical performance was related to the sample MT7.5 (E = 51 MPa and σ = 2 MPa) with respect to the other samples, i.e.: M (E = 47 MPa and σ = 1.8 MPa) and MT10 (E = 32 MPa and σ = 1.4 MPa). The acellular in vitro bioactivity experiment confirmed apatite formation on the surfaces of all samples for various periods of soaking time. Based on cell study, the sample which possessed favorable mechanical behavior (MT7.5) supported attachment and proliferation of osteoblastic cells. These results revealed that the MT7.5 scaffold with improved mechanical and biological properties could have a potential to be used in bone substitute. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:550–556, 2015     

Effect of oral theaflavin administration on body weight,fat, and muscle in healthy subjects: a randomized pilot study

Theaflavins are reddish-colored polyphenols in black tea. To test the efficacy of theaflavin administration on body fat and muscle, we performed a randomized, double-blind, placebo-controlled study and investigated the effect of theaflavins administration on the body composition using of healthy subjects. In this study, 30 male and female Japanese were enrolled and participants were randomly allocated to receive placebo, theaflavin (50 or 100 mg/day), or catechin (400 mg/ml) for 10 weeks. The effects were evaluated using body weight, body fat percentage, subcutaneous fat percentage, and skeletal muscle percentage. Theaflavin administration significantly improved body fat percentage, subcutaneous fat percentage, and skeletal muscle percentage when compared to with the placebo. In contrast, there was no significant difference in all measured outcomes between the catechin and the placebo groups. The results indicate that oral administration of theaflavin had a beneficial effect on body fat and muscle in healthy individuals.     

Effect of surface roughness, biofilm coverage and biofilm structure on the electrochemical efficiency of microbial cathodes

Biofilms of Geobacter sulfurreducens were formed under chronoamperometry at −0.5 V and −0.6 V vs. Ag/AgCl on stainless steel cathodes and tested for fumarate reduction. Increasing the surface roughness Ra from 2.0 μm to 4.0 μm increased currents by a factor of 1.6. The overall current density increased with biofilm coverage. When the current density was calculated with respect to the biofilm-coated area only, values up to 280 A/m² were derived. These values decreased with biofilm coverage and indicated that isolated cells or small colonies locally provide higher current density than dense colonies. Steel composition affected the current values because of differences in biofilm structure and electron transfer rates. Biofilms formed under polarisation revealed better electrochemical characteristics than biofilm developed at open circuit. This work opens up new guidelines for the design of microbial cathodes: a uniform carpet of isolated bacteria or small colonies should be targeted, avoiding the formation of large colonies.     

Effect of cerebrocrast on body and organ weights,food and water intake,and urine output of normal rats

Type 2 diabetes is associated with obesity, insulin resistance, hyperglycemia, hyperphagia, polyuria, body weight gain, excessive secretion of glucocorticoids (GCs), thymus involution, adrenal gland hypertrophy, diabetic nephropathy, etc. We examined the effect of cerebrocrast, a new antidiabetic agent (synthesized in the Latvian Institute of Organic Synthesis), on body weight, food and water intake, urine output, and on changes of organ weight: that is, kidney, thymus, adrenal gland of normal rats. Cerebrocrast was administered at doses of 0.05 and 0.5 mg kg⁻¹ per os (p.o.) once a day for three consecutive days, and its effects were observed from 3 to 27 days after the last administration. Cerebrocrast, during the experimental period, decreased body weight by an average of approximately 32.3%, food intake by about 10–15% at the beginning of the experiments and by 22.6% at the end of the experiments, especially at a dose of 0.5 mg kg⁻¹. Water intake and urine output in comparison with controls were decreased. The daily food intake decreased about 1.0 and 2.1 g by administering single cerebrocrast doses of 0.05 and 0.5 mg kg⁻¹ body weight (b.w.), respectively, but by administering for three consecutive days, food intake decreased by about 2.2 and 3.4 g, respectively. The weekly body weight gain decreased by administering a single dose of cerebrocrast by 2.61 and 2.51 g, respectively, and by triple administration it decreased by 4.36 and 3.07 g, respectively. Cerebrocrast has long‐lasting effects on these parameters and on thymus and adrenal gland weight. As cerebrocrast decreased glucose levels in normal and streptozotocin (STZ)‐induced diabetic rats, it also promoted glucose uptake by the brain, intensified insulin action and formation de novo of insulin receptors. We can conclude that cerebrocrast may regulate food intake and body weight through glucose sensing by proopiomelanocortin (POMC) neurons, that are involved in control of glucose homeostasis, stimulation of α‐melanocyte‐stimulating hormone (α‐MSH) secretion, activation of MC4‐Rs and inhibition of neuropeptide Y (NPY) in the ARC of the hypothalamus, affecting the kidney, and causing decreased urine output and water intake. Moreover, it could stimulate secretion of vasopressin. By administration of cerebrocrast thymus mass was increased, thereby preventing the action of GCs. As cerebrocrast inhibited L‐ and T‐type calcium channels, it can prevent vasoconstriction of kidney arterioles and aldosterone secretion that have significant roles in the development of hypertension and diabetic nephropathy. These properties of cerebrocrast are important for treatment of Type 2 diabetes and its consequent development of hypertension and diabetic nephropathy. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of pH and aluminum on surface properties of barley roots as determined from water vapor adsorption

Water vapor adsorption isotherms were used for the estimation of surface areas and adsorption energy distribution functions of roots of barley grown at different pH levels and at a toxic Al level (10 mg·dm⁻³), induced at tillering and shooting stages of plants growth. Values of surface area as well as energy distributions were the same for the roots grown at all pH values studied: 2, 4 and 7 and not dependent on the age of the plants indicating that the protons do not alter the physicochemical build-up of the surface of roots. However, significant changes of the root surface properties under the influence of aluminum: increase of surface area, average adsorption energy and amount of highly energetic adsorption sites together with a decrease of low energetic sites were observed.     

毛乌素沙地中间锦鸡儿幼苗生长、气体交换和叶绿素荧光对模拟降水量变化的响应

选择毛乌素沙地优势灌木中间锦鸡儿为研究对象,人为控制4种降水量水平来测定中间锦鸡儿幼苗的形态,。生物量干重,气体交换和叶绿素荧光参数,结果表明,不同施水量显著影响幼苗株高,基径,叶数,叶面积,生物量干重,净光合速率,蒸腾速率,气孔导度以及水分利用效率,157．5mm和630mm施水的幼苗以上参数显著低于472．5mm施水的幼苗,157．5mm和630mm施水量的幼苗PSIII光化学效率和最大荧光与初始荧光比显著小于472．5mm施水量的幼苗;不同施水量对幼苗生物量干重分配有显著影响;随着施水量增加,根冠生物量干重比显著减少。     

Effects of blood type and blood handling on feeding success,longevity and egg production in the body louse,Pediculus humanus humanus

The effects of feeding different types of human blood to human body lice, Pediculus humanus humanus L. (Phthiraptera: Pediculidae), on feeding success, longevity and numbers of eggs laid were investigated using an artificial blood‐feeding system in the laboratory. No significant differences were found between lice fed on different human blood types for any of the parameters tested. However, when lice were fed on human blood of one blood type followed immediately by a different blood type, they took significantly smaller bloodmeals, their longevity was reduced and they laid fewer eggs per female than control lice that had been fed twice on the same human blood type. When lice were fed human blood that had been stored for 1–26 weeks, the quantity of blood taken, the proportion of lice that became fully engorged and lice longevity diminished gradually as the storage time of the blood increased, but there was no effect of storage time on the mean number of eggs laid per female. However, lice would not feed on 26‐week‐old blood. The type of anticoagulant used had a significant effect on the proportion fed, longevity and number of eggs laid per female. Generally, EDTA (ethylenediaminetetraacetic acid)‐treated blood reduced longevity and the number of eggs laid per female to a greater degree than heparinized or citrated blood. Lice fed on rabbit blood took significantly larger amounts of blood, lived longer and laid a higher mean number of eggs per female than lice fed on human blood.     

Effect of biotite,zeolite, heavy clay,bentonite and apatite on the uptake of radiocesium by grass from peat soil

Biotite is a potassium rich mineral, which is used as a fertilizer in organic farming and as a soil amendment in conventional farming. Its ability to reduce ¹³⁴Cs uptake by ryegrass from peat soil was studied in pot experiments and compared with zeolite, heavy clay, bentonite and apatite. In addition, the long-term effect of biotite on ¹³⁷Cs uptake from peat soil was studied in the peat field. In the pot experiments in the first cut of ryegrass, the minerals decreased ¹³⁴Cs uptake by plants in the following order: zeolite > heavy clay > bentonite > biotite > apatite. Apatite did not have any effect on the plant ¹³⁴Cs level. In the later cuts, the uptake of ¹³⁴Cs from biotite-treated soil decreased further while that from soils treated with other minerals remained unchanged or even increased. In general, ¹³⁴Cs uptake by plants decreased with increasing mineral level. The decrease of ¹³⁴Cs uptake became more efficient, especially at the early growth stage, by mixing small amounts of zeolite in biotite. The results of the field experiment indicated the long-term effect of biotite on reducing ¹³⁴Cs uptake by plants. Biotite application rate was 30 t ha-1. The five-year mean of the plant/soil concentration ratio of ¹³⁷Cs was 0.05 for biotite-treated soil, in contrast to 0.14 for the control soil. On the whole, biotite reduced considerably the ¹³⁷Cs level of plants on peat soil and this effect was long-lasting. For an effective reduction of plant radiocesium a great quantity of biotite is needed and therefore it is most suitable for greenhouse cultivation where contaminated slightly decomposed peat is used as a growing medium.     

Laboratory studies on surface sampling of Bacillus anthracis contamination: summary,gaps and recommendations

This article summarizes previous laboratory studies to characterize the performance of methods for collecting, storing/transporting, processing and analysing samples from surfaces contaminated by Bacillus anthracis or related surrogates. The focus is on plate culture and count estimates of surface contamination for swab, wipe and vacuum samples of porous and nonporous surfaces. Summaries of the previous studies and their results were assessed to identify gaps in information needed as inputs to calculate key parameters critical to risk management in biothreat incidents. One key parameter is the number of samples needed to make characterization or clearance decisions with specified statistical confidence. Other key parameters include the ability to calculate, following contamination incidents, the (i) estimates of B. anthracis contamination, as well as the bias and uncertainties in the estimates and (ii) confidence in characterization and clearance decisions for contaminated or decontaminated buildings. Gaps in knowledge and understanding identified during the summary of the studies are discussed. Additional work is needed to quantify (i) the false‐negative rates of surface‐sampling methods with lower concentrations on various surfaces and (ii) the effects on performance characteristics of: aerosol vs liquid deposition of spores, using surrogates instead of B. anthracis, real‐world vs laboratory conditions and storage and transportation conditions. Recommendations are given for future evaluations of data from existing studies and possible new studies.