Oxidative inactivation of the lymphoid tyrosine phosphatase mediated by both general and active site directed NO donors

Oxidative modification of protein tyrosine phosphatases (PTPs) has recently been recognized as an important regulatory mechanism in biological systems. Reported herein is the oxidative inactivation of the lymphoid tyrosine phosphatase (LYP) with both the general nitrosating reagent sodium nitroprusside (SNP) and also a novel peptide-based nitrosating reagent, Ac-ARLIEDNE(HcyNO)TAREG-NH₂, where HcyNO = S-nitrosohomocysteine. The SNP oxidatively inactivated LYP with a k_inact of 0.383 per min and a K_I of 27.4 μM and mixed-type inactivation kinetics. The peptide was a competitive LYP inactivator with a k_inact of 0.0472 per min and a K_I of 7.00 μM. LYP nitrosation by SNP was characterized by the addition of several NO moieties to the enzyme, while oxidation of LYP by the peptide did not result in the formation of a LYP-NO adduct. We propose that general NO donors promiscuously nitrosate any free cysteine residue while the active-site directed peptide selectively oxidizes the catalytic cysteine residue, resulting in the formation of a disulfide bond between the catalytic cysteine residue and a second cysteine in the active site.     

Early intermediates in the PDI-assisted folding of ribonuclease A

The oxidative refolding of ribonuclease A has been investigated in several experimental conditions using a variety of redox systems. All these studies agree that the formation of disulfide bonds during the process occurs through a nonrandom mechanism with a preferential coupling of certain cysteine residues. We have previously demonstrated that in the presence of glutathione the refolding process occurs through the reiteration of two sequential reactions: a mixed disulfide with glutathione is produced first which evolves to form an intramolecular S-S bond. In the same experimental conditions, protein disulfide isomerase (PDI) was shown to catalyze formation and reduction of mixed disulfides with glutathione as well as formation of intramolecular S-S bonds. This paper reports the structural characterization of the one-disulfide intermediate population during the oxidative refolding of Ribonuclease A under the presence of PDI and glutathione with the aim of defining the role of the enzyme at the early stages of the reaction. The one-disulfide intermediate population occurring at the early stages of both the uncatalyzed and the PDI-catalyzed refolding was purified and structurally characterized by proteolytic digestion followed by MALDI-MS and LC/ESIMS analyses. In the uncatalyzed refolding, a total of 12 disulfide bonds out of the 28 theoretical possible cysteine couplings was observed, confirming a nonrandom distribution of native and nonnative disulfide bonds. Under the presence of PDI, only two additional nonnative disulfides were detected. Semiquantitative LC/ESIMS analysis of the distribution of the S-S bridged peptides showed that the most abundant species were equally populated in both the uncatalyzed and the catalyzed process. This paper shows the first structural characterization of the one-disulfide intermediate population formed transiently during the refolding of ribonuclease A in quasi-physiological conditions that mimic those present in the ER lumen. At the early stages of the process, three of the four native disulfides are detected, whereas the Cys26-Cys84 pairing is absent. Most of the nonnative disulfide bonds identified are formed by nearest-neighboring cysteines. The presence of PDI does not significantly alter the distribution of S-S bonds, suggesting that the ensemble of single-disulfide species is formed under thermodynamic control.     

Interplay between Disulfide Bonding and N-Glycosylation Defines SLC4 Na+-coupled Transporter Extracellular Topography

The extracellular loop 3 (EL-3) of SLC4 Na⁺-coupled transporters contains 4 highly conserved cysteines and multiple N-glycosylation consensus sites. In the electrogenic Na⁺-HCO₃⁻ cotransporter NBCe1-A, EL-3 is the largest extracellular loop and is predicted to consist of 82 amino acids. To determine the structural-functional importance of the conserved cysteines and the N-glycosylation sites in NBCe1-A EL-3, we analyzed the potential interplay between EL-3 disulfide bonding and N-glycosylation and their roles in EL-3 topological folding. Our results demonstrate that the 4 highly conserved cysteines form two intramolecular disulfide bonds, Cys⁵⁸³-Cys⁵⁸⁵ and Cys⁶¹⁷-Cys⁶⁴², respectively, that constrain EL-3 in a folded conformation. The formation of the second disulfide bond is spontaneous and unaffected by the N-glycosylation state of EL-3 or the first disulfide bond, whereas formation of the first disulfide bond relies on the presence of the second disulfide bond and is affected by N-glycosylation. Importantly, EL-3 from each monomer is adjacently located at the NBCe1-A dimeric interface. When the two disulfide bonds are missing, EL-3 adopts an extended conformation highly accessible to protease digestion. This unique adjacent parallel location of two symmetrically folded EL-3 loops from each monomer resembles a domain-like structure that is potentially important for NBCe1-A function in vivo. Moreover, the formation of this unique structure is critically dependent on the finely tuned interplay between disulfide bonding and N-glycosylation in the membrane processed NBCe1-A dimer.     

Cysteine Cross-linking Defines the Extracellular Gate for the Leishmania donovani Nucleoside Transporter 1.1 (LdNT1.1)

Equilibrative nucleoside transporters are a unique family of proteins that enable uptake of nucleosides/nucleobases into a wide range of eukaryotes and internalize a myriad of drugs used in the treatment of cancer, heart disease, AIDs, and parasitic infections. In previous work we generated a structural model for such a transporter, the LdNT1.1 nucleoside permease from the parasitic protozoan Leishmania donovani, using ab initio computation. The model suggested that aromatic residues present in transmembrane helices 1, 2, and 7 interact to form an extracellular gate that closes the permeation pathway in the inward-open conformation. Mutation of residues Phe-48_TM1 and Trp-75_TM2 abrogated transport activity, consistent with such prediction. In this study cysteine mutagenesis and oxidative cross-linking were combined to analyze proximity relationships of helices 1, 2, and 7 in LdNT1.1. Disulfide bond formation between introduced paired cysteines at the interface of such helices (A61C_TM1/F74C_TM2, A61C_TM1/G350C_TM7, and F74C_TM2/G350C_TM7) was analyzed by transport measurement and gel mobility shifts upon oxidation with Cu (II)-(1,10-phenanthroline)₃. In all cases cross-linking inhibited transport. However, if LdNT1.1 ligands were included during cross-linking, inhibition of transport was reduced, suggesting that ligands moved the three gating helices apart. Moreover, all paired cysteine mutants exhibited a mobility shift upon oxidation, corroborating the formation of a disulfide bond. These data support the notion that helices 1, 2, and 7 constitute the extracellular gate of LdNT1.1, thus further validating the computational model and the previously demonstrated importance of F48_TM1 and Trp-75_TM2 in tethering together helices that are part of the gate.     

Conserved Cysteine Residues Provide a Protein-Protein Interaction Surface in Dual Oxidase (DUOX) Proteins

Intramolecular disulfide bond formation is promoted in oxidizing extracellular and endoplasmic reticulum compartments and often contributes to protein stability and function. DUOX1 and DUOX2 are distinguished from other members of the NOX protein family by the presence of a unique extracellular N-terminal region. These peroxidase-like domains lack the conserved cysteines that confer structural stability to mammalian peroxidases. Sequence-based structure predictions suggest that the thiol groups present are solvent-exposed on a single protein surface and are too distant to support intramolecular disulfide bond formation. To investigate the role of these thiol residues, we introduced four individual cysteine to glycine mutations in the peroxidase-like domains of both human DUOXs and purified the recombinant proteins. The mutations caused little change in the stabilities of the monomeric proteins, supporting the hypothesis that the thiol residues are solvent-exposed and not involved in disulfide bonds that are critical for structural integrity. However, the ability of the isolated hDUOX1 peroxidase-like domain to dimerize was altered, suggesting a role for these cysteines in protein-protein interactions that could facilitate homodimerization of the peroxidase-like domain or, in the full-length protein, heterodimeric interactions with a maturation protein. When full-length hDUOX1 was expressed in HEK293 cells, the mutations resulted in decreased H₂O₂ production that correlated with a decreased amount of the enzyme localized to the membrane surface rather than with a loss of activity or with a failure to synthesize the mutant proteins. These results support a role for the cysteine residues in intermolecular disulfide bond formation with the DUOX maturation factor DUOXA1.     

A Small Molecule Inhibitor of Endoplasmic Reticulum Oxidation 1 (ERO1) with Selectively Reversible Thiol Reactivity

Endoplasmic reticulum oxidation 1 (ERO1) is a conserved eukaryotic flavin adenine nucleotide-containing enzyme that promotes disulfide bond formation by accepting electrons from reduced protein disulfide isomerase (PDI) and passing them on to molecular oxygen. Although disulfide bond formation is an essential process, recent experiments suggest a surprisingly broad tolerance to genetic manipulations that attenuate the rate of disulfide bond formation and that a hyperoxidizing ER may place stressed cells at a disadvantage. In this study, we report on the development of a high throughput in vitro assay for mammalian ERO1α activity and its application to identify small molecule inhibitors. The inhibitor EN460 (IC₅₀, 1.9 μm) interacts selectively with the reduced, active form of ERO1α and prevents its reoxidation. Despite rapid and promiscuous reactivity with thiolates, EN460 exhibits selectivity for ERO1. This selectivity is explained by the rapid reversibility of the reaction of EN460 with unstructured thiols, in contrast to the formation of a stable bond with ERO1α followed by displacement of bound flavin adenine dinucleotide from the active site of the enzyme. Modest concentrations of EN460 and a functionally related inhibitor, QM295, promote signaling in the unfolded protein response and precondition cells against severe ER stress. Together, these observations point to the feasibility of targeting the enzymatic activity of ERO1α with small molecule inhibitors.     

The Mitochondrial Intermembrane Space Oxireductase Mia40 Funnels the Oxidative Folding Pathway of the Cytochrome c Oxidase Assembly Protein Cox19

Mia40-catalyzed disulfide formation drives the import of many proteins into the mitochondria. Here we characterize the oxidative folding of Cox19, a twin CX₉C Mia40 substrate. Cox19 oxidation is extremely slow, explaining the persistence of import-competent reduced species in the cytosol. Mia40 accelerates Cox19 folding through the specific recognition of the third Cys in the second helical CX₉C motif and the subsequent oxidation of the inner disulfide bond. This renders a native-like intermediate that oxidizes in a slow uncatalyzed reaction into native Cox19. The same intermediate dominates the pathway in the absence of Mia40, and chemical induction of an α-helical structure by trifluoroethanol suffices to accelerate productive folding and mimic the Mia40 folding template mechanism. The Mia40 role is to funnel a rough folding landscape, skipping the accumulation of kinetic traps, providing a rationale for the promiscuity of Mia40.     

Identification of Allosteric Disulfides from Prestress Analysis

Disulfide bonds serve to form physical cross-links between residues in protein structures, thereby stabilizing the protein fold. Apart from this purely structural role, they can also be chemically active, participating in redox reactions, and they may even potentially act as allosteric switches controlling protein functions. Specific types of disulfide bonds have been identified in static protein structures from their distinctive pattern of dihedral bond angles, and the allosteric function of such bonds is purported to be related to the torsional strain they store. Using all-atom molecular-dynamics simulations for ∼700 disulfide bonded proteins, we analyzed the intramolecular mechanical forces in 20 classes of disulfide bonds. We found that two particular classes, the −RHStaple and the −/+RHHook disulfides, are indeed more stressed than other disulfide bonds, but the stress is carried primarily by stretching of the S-S bond and bending of the neighboring bond angles, rather than by dihedral torsion. This stress corresponds to a tension force of magnitude ∼200 pN, which is balanced by repulsive van der Waals interactions between the cysteine Cα atoms. We confirm stretching of the S-S bond to be a general feature of the −RHStaples and the −/+RHHooks by analyzing ∼20,000 static protein structures. Given that forced stretching of S-S bonds is known to accelerate their cleavage, we propose that prestress of allosteric disulfide bonds has the potential to alter the reactivity of a disulfide, thereby allowing us to readily switch between functional states.     

Going through the Barrier: COUPLED DISULFIDE EXCHANGE REACTIONS PROMOTE EFFICIENT CATALYSIS IN QUIESCIN SULFHYDRYL OXIDASE*

The quiescin sulfhydryl oxidase (QSOX) family of enzymes generates disulfide bonds in peptides and proteins with the reduction of oxygen to hydrogen peroxide. Determination of the potentials of the redox centers in Trypanosoma brucei QSOX provides a context for understanding catalysis by this facile oxidant of protein thiols. The CXXC motif of the thioredoxin domain is comparatively oxidizing (E′₀ of −144 mV), consistent with an ability to transfer disulfide bonds to a broad range of thiol substrates. In contrast, the proximal CXXC disulfide in the ERV (essential for respiration and vegetative growth) domain of TbQSOX is strongly reducing (E′₀ of −273 mV), representing a major apparent thermodynamic barrier to overall catalysis. Reduction of the oxidizing FAD cofactor (E′₀ of −153 mV) is followed by the strongly favorable reduction of molecular oxygen. The role of a mixed disulfide intermediate between thioredoxin and ERV domains was highlighted by rapid reaction studies in which the wild-type CGAC motif in the thioredoxin domain of TbQSOX was replaced by the more oxidizing CPHC or more reducing CGPC sequence. Mixed disulfide bond formation is accompanied by the generation of a charge transfer complex with the flavin cofactor. This provides thermodynamic coupling among the three redox centers of QSOX and avoids the strongly uphill mismatch between the formal potentials of the thioredoxin and ERV disulfides. This work identifies intriguing mechanistic parallels between the eukaryotic QSOX enzymes and the DsbA/B system catalyzing disulfide bond generation in the bacterial periplasm and suggests that the strategy of linked disulfide exchanges may be exploited in other catalysts of oxidative protein folding.     

Structure and mechanisms of the DsbB-DsbA disulfide bond generation machine

All organisms possess specific cellular machinery that introduces disulfide bonds into proteins newly synthesized and transported out of the cytosol. In E. coli, the membrane-integrated DsbB protein cooperates with ubiquinone to generate a disulfide bond, which is transferred to DsbA, a periplasmic dithiol oxido-reductase that serves as the direct disulfide bond donor to proteins folding oxidatively in this compartment. Despite the extensive accumulation of knowledge on this oxidation system, molecular details of the DsbB reaction mechanisms had been controversial due partly to the lack of structural information until our recent determination of the crystal structure of a DsbA-DsbB-ubiquinone complex. In this review we discuss the structural and chemical nature of reaction intermediates in the DsbB catalysis and the illuminated molecular mechanisms that account for the de novo formation of a disulfide bond and its donation to DsbA. It is suggested that DsbB gains the ability to oxidize its specific substrate, DsbA, having very high redox potential, by undergoing a DsbA-induced rearrangement of cysteine residues. One of the DsbB cysteines that are now reduced then interacts with ubiquinone to form a charge transfer complex, leading to the regeneration of a disulfide at the DsbB active site, and the cycle can begin anew.     

Mechanism of the electron transfer catalyst DsbB from Escherichia coli

The membrane protein DsbB from Escherichia coli is essential for disulfide bond formation and catalyses the oxidation of the periplasmic dithiol oxidase DsbA by ubiquinone. DsbB contains two catalytic disulfide bonds, Cys41-Cys44 and Cys104-Cys130. We show that DsbB directly oxidizes one molar equivalent of DsbA in the absence of ubiquinone via disulfide exchange with the 104-130 disulfide bond, with a rate constant of 2.7 x 10 M(-1) x s(-1). This reaction occurs although the 104-130 disulfide is less oxidizing than the catalytic disulfide bond of DsbA (E(o)' = -186 and -122 mV, respectively). This is because the 41-44 disulfide, which is only accessible to ubiquinone but not to DsbA, is the most oxidizing disulfide bond in a protein described so far, with a redox potential of -69 mV. Rapid intramolecular disulfide exchange in partially reduced DsbB converts the enzyme into a state in which Cys41 and Cys44 are reduced and thus accessible for reoxidation by ubiquinone. This demonstrates that the high catalytic efficiency of DsbB results from the extreme intrinsic oxidative force of the enzyme.     

The disulfide oxidoreductase SdbA is active in Streptococcus gordonii using a single C‐terminal cysteine of the CXXC motif

Recently, we identified a novel disulfide oxidoreductase, SdbA, in the oral bacterium Streptococcus gordonii. Disulfide oxidoreductases form disulfide bonds in nascent proteins using a CXXC catalytic motif. Typically, the N‐terminal cysteine interacts with substrates, whereas the C‐terminal cysteine is buried and only reacts with the first cysteine of the motif. In this study, we investigated the SdbA C⁸⁶P⁸⁷D⁸⁸C⁸⁹ catalytic motif. In vitro, SdbA single cysteine variants at the N or C‐terminal position (SdbA_C86P and SdbA_C89A) were active but displayed different susceptibility to oxidation, and N‐terminal cysteine was prone to sulfenylation. In S. gordonii, mutants with a single N‐terminal cysteine were inactive and formed unstable disulfide adducts with other proteins. Activity was partially restored by inactivation of pyruvate oxidase, a hydrogen peroxide generator. Presence of the C‐terminal cysteine alone (in the SdbA_C86P variant) could complement the ΔsdbA mutant and restore disulfide bond formation in recombinant and natural protein substrates. These results provide evidence that certain disulfide oxidoreductases can catalyze disulfide bond formation using a single cysteine of the CXXC motif, including the buried C‐terminal cysteine.     

Modulation of an Active-Site Cysteine pKa Allows PDI to Act as a Catalyst of both Disulfide Bond Formation and Isomerization

Protein disulfide isomerase (PDI) plays a central role in disulfide bond formation in the endoplasmic reticulum. It is implicated both in disulfide bond formation and in disulfide bond reduction and isomerization. To be an efficient catalyst of all three reactions requires complex mechanisms. These include mechanisms to modulate the pK_a values of the active-site cysteines of PDI. Here, we examined the role of arginine 120 in modulating the pK_a values of these cysteines. We find that arginine 120 plays a significant role in modulating the pK_a of the C-terminal active-site cysteine in the a domain of PDI and plays a role in determining the reactivity of the N-terminal active-site cysteine but not via direct modulation of its pK_a. Mutation of arginine 120 and the corresponding residue, arginine 461, in the a′ domain severely reduces the ability of PDI to catalyze disulfide bond formation and reduction but enhances the ability to catalyze disulfide bond isomerization due to the formation of more stable PDI-substrate mixed disulfides. These results suggest that the modulation of pK_a of the C-terminal active cysteine by the movement of the side chain of these arginine residues into the active-site locales has evolved to allow PDI to efficiently catalyze both oxidation and isomerization reactions.     

Characterization of the menaquinone-dependent disulfide bond formation pathway of Escherichia coli

In the protein disulfide-introducing system of Escherichia coli, plasma membrane-integrated DsbB oxidizes periplasmic DsbA, the primary disulfide donor. Whereas the DsbA-DsbB system utilizes the oxidizing power of ubiquinone (UQ) under aerobic conditions, menaquinone (MK) is believed to function as an immediate electron acceptor under anaerobic conditions. Here, we characterized MK reactivities with DsbB. In the absence of UQ, DsbB was complexed with MK8 in the cell. In vitro studies showed that, by binding to DsbB in a manner competitive with UQ, MK specifically oxidized Cys41 and Cys44 of DsbB and activated its catalytic function to oxidize reduced DsbA. In contrast, menadione used in earlier studies proved to be a more nonspecific oxidant of DsbB. During catalysis, MK8 underwent a spectroscopic transition to develop a visible violet color (lambdamax = 550 nm), which required a reduced state of Cys44 as shown previously for UQ color development (lambdamax = 500 nm) on DsbB. In an in vitro reaction system of MK8-dependent oxidation of DsbA at 30 degrees C, two reaction components were observed, one completing within minutes and the other taking >1 h. Both of these reaction modes were accompanied by the transition state of MK, for which the slower reaction proceeded through the disulfide-linked DsbA-DsbB(MK) intermediate. The MK-dependent pathway provides opportunities to further dissect the quinone-dependent DsbA-DsbB redox reactions.     

Analysis of the Link between the Redox State and Enzymatic Activity of the HtrA (DegP) Protein from Escherichia coli

Bacterial HtrAs are proteases engaged in extracytoplasmic activities during stressful conditions and pathogenesis. A model prokaryotic HtrA (HtrA/DegP from Escherichia coli) requires activation to cleave its substrates efficiently. In the inactive state of the enzyme, one of the regulatory loops, termed LA, forms inhibitory contacts in the area of the active center. Reduction of the disulfide bond located in the middle of LA stimulates HtrA activity in vivo suggesting that this S-S bond may play a regulatory role, although the mechanism of this stimulation is not known. Here, we show that HtrA lacking an S-S bridge cleaved a model peptide substrate more efficiently and exhibited a higher affinity for a protein substrate. An LA loop lacking the disulfide was more exposed to the solvent; hence, at least some of the interactions involving this loop must have been disturbed. The protein without S-S bonds demonstrated lower thermal stability and was more easily converted to a dodecameric active oligomeric form. Thus, the lack of the disulfide within LA affected the stability and the overall structure of the HtrA molecule. In this study, we have also demonstrated that in vitro human thioredoxin 1 is able to reduce HtrA; thus, reduction of HtrA can be performed enzymatically.     

The status of cysteine residues in the extrinsic 33 kDa protein of spinach photosystem II complexes

Two cysteine residues of the extrinsic 33 kDa protein in the oxygen-evolving photosystemII (PS II) complexes were found to exist as cystine residues in situ. The 33 kDa protein, when reduced by 2-mercaptoethanol in either the presence or the absence of 6 M guanidine-HCl (Gdn-HCl), could not rebind with the CaCl₂-treated PS II complexes, from which the 33 kDa protein was removed, and evolve any oxygen. Two sulfhydryl (SH) groups of the 33 kDa protein were easily reoxidized to a disulfide (S-S) bond by stirring under aerobic conditions with the concomitant regaining of both the binding ability to the CaCl₂-treated PS II complexes and the oxygen-evolving activity.The molecular conformation of the 33 kDa protein was examined by circular dichroic (CD) spectrometry in the UV regions to reveal that the conformation in the reduced state was completely different from those of the untreated and reoxidized states. The disulfide (S-S) bond of the 33 kDa protein is thus essential to maintain the molecular conformation required to function.Abbreviations CD circular dichroism - Chl chlorophyll - DMQ 2,5-dimethyl-p-benzoquinone - DTNB 5,5-dithio-bis (2-nitrobenzoic acid) - EDTA ethylendiamine-tetraacetic acid - Gdn-HCl guanidine-hydrochloric acid - PS II photosystem II - SDS sodium dodecylsulfate This paper was presented at the U.S.-Japan Binational Seminar on Solar Energy Conversion, Okazaki, Japan, March 17–21, 1987     

The Reaction Mechanism of Methyl-Coenzyme M Reductase: HOW AN ENZYME ENFORCES STRICT BINDING ORDER*

Methyl-coenzyme M reductase (MCR) is a nickel tetrahydrocorphinoid (coenzyme F430) containing enzyme involved in the biological synthesis and anaerobic oxidation of methane. MCR catalyzes the conversion of methyl-2-mercaptoethanesulfonate (methyl-SCoM) and N-7-mercaptoheptanoylthreonine phosphate (CoB₇SH) to CH₄ and the mixed disulfide CoBS-SCoM. In this study, the reaction of MCR from Methanothermobacter marburgensis, with its native substrates was investigated using static binding, chemical quench, and stopped-flow techniques. Rate constants were measured for each step in this strictly ordered ternary complex catalytic mechanism. Surprisingly, in the absence of the other substrate, MCR can bind either substrate; however, only one binary complex (MCR·methyl-SCoM) is productive whereas the other (MCR·CoB₇SH) is inhibitory. Moreover, the kinetic data demonstrate that binding of methyl-SCoM to the inhibitory MCR·CoB₇SH complex is highly disfavored (K_d = 56 mm). However, binding of CoB₇SH to the productive MCR·methyl-SCoM complex to form the active ternary complex (CoB₇SH·MCR(Ni^I)·CH₃SCoM) is highly favored (K_d = 79 μm). Only then can the chemical reaction occur (k_obs = 20 s⁻¹ at 25 °C), leading to rapid formation and dissociation of CH₄ leaving the binary product complex (MCR(Ni^II)·CoB₇S⁻·SCoM), which undergoes electron transfer to regenerate Ni(I) and the final product CoBS-SCoM. This first rapid kinetics study of MCR with its natural substrates describes how an enzyme can enforce a strictly ordered ternary complex mechanism and serves as a template for identification of the reaction intermediates.     

Protein disulfide isomerase homolog TrPDI2 contributing to cellobiohydrolase production in Trichoderma reesei

The majority of the cysteine residues in the secreted proteins form disulfide bonds via protein disulfide isomerase (PDI)-mediated catalysis, stabilizing the enzyme activity. The role of PDI in cellulase production is speculative, as well as the possibility of PDI as a target for improving enzyme production efficiency of Trichoderma reesei, a widely used producer of enzyme for the production of lignocellulose-based biofuels and biochemicals. Here, we report that a PDI homolog, TrPDI2 in T. reesei exhibited a 36.94% and an 11.81% similarity to Aspergillus niger TIGA and T. reesei PDI1, respectively. The capability of TrPDI2 to recover the activity of reduced and denatured RNase by promoting refolding verified its protein disulfide isomerase activity. The overexpression of Trpdi2 increased the secretion and the activity of CBH1 at the early stage of cellulase induction. In addition, both the expression level and redox state of TrPDI2 responded to cellulase induction in T. reesei, providing sustainable oxidative power to ensure cellobiohydrolase maturation and production. The results suggest that TrPDI2 may contribute to cellobiohydrolase secretion by enhancing the capability of disulfide bond formation, which is essential for protein folding and maturation.     

Formation of engineered intersubunit disulfide bond in cytochrome bc1 complex disrupts electron transfer activity in the complex

Protein domain movement of the Rieske iron-sulfur protein has been speculated to play an essential role in the bifurcated oxidation of ubiquinol catalyzed by the cytochrome bc₁ complex. To better understand the electron transfer mechanism of the bifurcated ubiquinol oxidation at Qp site, we fixed the head domain of ISP at the cyt c₁ position by creating an intersubunit disulfide bond between two genetically engineered cysteine residues: one at position 141 of ISP and the other at position 180 of the cyt c₁ [S141C(ISP)/G180C(cyt c₁)]. The formation of a disulfide bond between ISP and cyt c₁ in this mutant complex is confirmed by SDS-PAGE and Western blot. In this mutant complex, the disulfide bond formation is concurrent with the loss of the electron transfer activity of the complex. When the disulfide bond is released by treatment with β-mercaptoethanol, the activity is restored. These results further support the hypothesis that the mobility of the head domain of ISP is functionally important in the cytochrome bc₁ complex. Formation of the disulfide bond between ISP and cyt c₁ shortens the distance between the [2Fe-2S] cluster and heme c₁, hence the rate of intersubunit electron transfer between these two redox prosthetic groups induced by pH change is increased. The intersubunit disulfide bond formation also decreases the rate of stigmatellin induced reduction of ISP in the fully oxidized complex, suggesting that an endogenous electron donor comes from the vicinity of the b position in the cytochrome b.     

The timing of hamster sperm nuclear decondensation and male pronucleus formation is related to sperm nuclear disulfide bond content

The relationship between the timing of both sperm nuclear decondensation and male pronucleus formation in the oocyte and the relative level of disulfide bonds within the sperm nucleus was evaluated. Since reduction of sperm nuclear disulfide (S-S) bonds is a prerequisite for sperm nuclear decondensation in vitro and in vivo, we hypothesized that sperm nuclei with relatively few S-S bonds would require less time to decondense in the oocyte than sperm nuclei with higher numbers of S-S bonds, and that male pronucleus formation would occur more rapidly as well. Four types of hamster sperm nuclei, in which the extent of S-S bonding differed, were microinjected into hamster oocytes, and the time course of sperm nuclear decondensation and male pronucleus formation was charted. Cauda epididymal sperm nuclei, which are rich in S-S bonds, required 45-60 min to decondense. In contrast, nuclei containing few S-S bonds (namely sonication-resistant spermatid nuclei and cauda epididymal sperm nuclei treated in vitro with the S-S bond-reducing agent dithiothreitol) decondensed within 5-10 min of microinjection. Caput epididymal sperm nuclei, with intermediate S-S bond content, decondensed in 10-20 min. Regardless of when decondensation occurred, formation of the male pronucleus never preceded that of the female pronucleus, which occurred 1.25-1.5 h after microinjection. However, sperm nuclei with few S-S bonds were more likely than S-S rich nuclei to transform into male pronuclei in synchrony with the formation of the female pronucleus. We conclude that the timing sperm nuclear decondensation and pronucleus formation depends in part upon the S-S bond content of the sperm nucleus.