Attempts to delineate the relative contributions of changes in hydrophobicity and packing to changes in stability of ribonuclease S mutants

While the hydrophobic driving force is thought to be a major contributor to protein stability, it is difficult to experimentally dissect out its contribution to the overall free energy of folding. We have made large to small substitutions of buried hydrophobic residues at positions 8 and 13 in the peptide/protein complex, RNase-S, and have characterized the structures by X-ray crystallography. The thermodynamics of association of these mutant S peptides with S protein was measured in the presence of different concentrations of methanol and ethanol. The reduction in the strength of the hydrophobic driving force in the presence of these organic solvents was estimated from surface-tension data as well as from the dependence of the DeltaC(p) of protein/peptide binding on the alcohol concentration. The data indicated a decrease in the strength of the hydrophobic driving force of about 30-40% over a 0-30% range of the alcohol concentration. We observe that large to small substitutions destabilize the protein. However, the amount of destabilization, relative to the wild type, is independent of the alcohol concentration over the range of alcohol concentrations studied. The data clearly indicate that decreased stability of the mutants is primarily due to the loss of packing interactions rather than a reduced hydrophobic driving force and suggest a value of the hydrophobic driving force of less than 18 cal mol(-)(1) A(2).     

Structural and thermodynamic consequences of introducing alpha-aminoisobutyric acid in the S peptide of ribonuclease S

The S protein-S peptide interaction is a model system to study binding thermodynamics in proteins. We substituted alanine at position 4 in S peptide by alpha-aminoisobutyric acid (Aib) to investigate the effect of this substitution on the conformation of free S peptide and on its binding to S protein. The thermodynamic consequences of this replacement were studied using isothermal titration calorimetry. The structures of the free and complexed peptides were studied using circular dichroic spectroscopy and X-ray crystallography, respectively. The alanine4Aib replacement stabilizes the free S peptide helix and does not perturb the tertiary structure of RNase S. Surprisingly, and in contrast to the wild-type S peptide, the DeltaG degrees of binding of peptide to S pro, over the temperature range 5-30 degrees C, is virtually independent of temperature. At 25 degrees C, the DeltaDeltaG degrees, DeltaDeltaH degrees, DeltaDeltaS and DeltaDeltaCp of binding are 0.7 kcal/mol, 2.8 kcal/mol, 6 kcal/mol x K and -60 kcal/mol x K, respectively. The positive value of DeltaDeltaS is probably due to a decrease in the entropy of uncomplexed alanine4Aib relative to the wild-type peptide. The positive value of DeltaDeltaH: degrees is unexpected and is probably due to favorable interactions formed in uncomplexed alanine4Aib. This study addresses the thermodynamic and structural consequences of a replacement of alanine by Aib both in the unfolded and complexed states in proteins.     

Local and long-range interactions in the thermal unfolding transition of bovine pancreatic ribonuclease A

This research was undertaken to distinguish between local and global unfolding in the reversible thermal denaturation of bovine pancreatic ribonclease A (RNase A). Local unfolding was monitored by steady-state and time-resolved fluorescence of nine mutants in each of which a single tryptophan was substituted for a wild-type residue. Global unfolding was monitored by far-UV circular dichroism and UV absorbance. All the mutants (except F8W and D38W) exhibited high specific enzymatic activity, and their far-UV CD spectra were very close to that of wild-type RNase A, indicating that the tryptophan substitutions did not affect the structure of any of the mutants (excluding K1W and Y92W) under folding conditions at 20 degrees C. Like wild-type RNase A, the various mutants exhibited reversible cooperative thermal unfolding transitions at pH 5, with transition temperatures 2.5-11 degrees C lower than that of the wild-type transition, as detected by far-UV CD or UV absorbance. Even at 80 degrees C, well above the cooperative transition of all the RNase A mutants, a considerable amount of secondary and tertiary structure was maintained. These studies suggest the following two-stage mechanism for the thermal unfolding transition of RNase A as the temperature is increased. First, at temperatures lower than those of the main cooperative transition, long-range interactions within the major hydrophobic core are weakened, e.g., those involving residues Phe-8 (in the N-terminal helix) and Lys-104 and Tyr-115 (in the C-terminal beta-hairpin motif). The structure of the chain-reversal loop (residues 91-95) relaxes in the same temperature range. Second, the subsequent higher-temperature cooperative unfolding transition is associated with a loss of secondary structure and additional changes in the tertiary contacts of the major hydrophobic core, e.g., those involving residues Tyr-73, Tyr-76, and Asp-38 on the other side of the molecule. The hydrophobic interactions of the C-terminal loop of the protein are enhanced by high temperature, and perhaps are responsible for the preservation of the local structural environment of Trp-124 at temperatures slightly above the major cooperative transition. The results shed new light on the thermal unfolding transitions, generally supporting the thermal unfolding hypothesis of Burgess and Scheraga, as modified by Matheson and Scheraga.     

Fine structure analysis of a protein folding transition state; distinguishing between hydrophobic stabilization and specific packing

Developing a detailed understanding of the structure and energetics of protein folding transition states is a key step in describing the folding process. The phi-value analysis approach allows the energetic contribution of side-chains to be mapped out by comparing wild-type with individual mutants where conservative changes are introduced. Studies where multiple substitutions are made at individual sites are much rarer but are potentially very useful for understanding the contribution of each element of a side-chain to transition state formation, and for distinguishing the relative importance of specific packing versus hydrophobic interactions. We have made a series of conservative mutations at multiple buried sites in the N-terminal domain of L9 in order to assess the relative importance of specific side-chain packing versus less specific hydrophobic stabilization of the transition state. A total of 28 variants were prepared using both naturally occurring and non-naturally occurring amino acids at six sites. Analysis of the mutants by NMR and CD showed no perturbation of the structure. There is no correlation between changes in hydrophobicity and changes in stability. In contrast, there is excellent linear correlation between the hydrophobicity of a side-chain and the log of the folding rate, ln(k(f)). The correlation between ln(k(f)) and the change in hydrophobicity holds even for substitutions that change the shape and/or size of a side-chain significantly. For most sites, the correlation with the logarithm of the unfolding rate, ln(k(u)), is much worse. Mutants with more hydrophobic amino acid substitutions fold faster, and those with less hydrophobic amino acid substitutions fold slower. The results show that hydrophobic interactions amongst core residues are an important driving force for forming the transition state, and are more important than specific tight packing interactions. Finally, a number of substitutions lead to negative phi-values and the origin of these effects are described.     

Hydrophobic core packing in the SH3 domain folding transition state.

How tightly packed is the hydrophobic core of a folding transition state structure? We have addressed this question by characterizing the effects on folding kinetics of > 40 substitutions of both large and small amino acids in the hydrophobic core of the Fyn SH3 domain. Our results show that residues at three positions, which we designate as the 'core folding nucleus', are tightly packed in the transition state, and substitutions at these positions cause the largest changes in the folding rate. The other six positions examined appear to be loosely packed; thus, substitutions at these positions with larger hydrophobic residues generally accelerate folding, presumably by increasing the rate of nonspecific hydrophobic collapse. Surprisingly, the folding rate can be greatly accelerated by residues that also significantly destabilize the native state structure. Furthermore, mutants with identical thermodynamic stability can differ by up to 55-fold in their folding rates. These results highlight the importance of hydrophobic core composition, as opposed to only topology, in determining the folding rate of a protein. They also provide a new explanation for the 'abnormal' phi-values observed in many protein folding kinetics studies.     

The relationship between conservation, thermodynamic stability, and function in the SH3 domain hydrophobic core

To investigate the relationships between sequence conservation, protein stability, and protein function, we have measured the thermodynamic stability, folding kinetics, and in vitro peptide-binding activity of a large number of single-site substitutions in the hydrophobic core of the Fyn SH3 domain. Comparison of these data to that derived from an analysis of a large alignment of SH3 domain sequences revealed a very good correlation between the distinct pattern of conservation observed at each core position and the thermodynamic stability of mutants. Conservation was also found to correlate well with the unfolding rates of mutants, but not to the folding rates, suggesting that evolution selects more strongly for optimal native state packing interactions than for maximal folding rates. Structural analysis suggests that residue-residue core packing interactions are very similar in all SH3 domains, which provides an explanation for the correlation between conservation and mutant stability effects studied in a single SH3 domain. We also demonstrate a correlation between stability and the in vivo activity of mutants, and between conservation and activity. However, the relationship between conservation and activity was very strong only for the three most conserved hydrophobic core positions. The weaker correlation between activity and conservation seen at the other seven core positions indicates that maintenance of protein stability is the dominant selective pressure at these positions. In general, the pattern of conservation at hydrophobic core positions appears to arise from conserved packing constraints, and can be effectively utilized to predict the destabilizing effects of amino acid substitutions.     

Enantiomer separation of triazole fungicides by high-performance liquid chromatography

Enantiomer separation is one of the most important prerequisites for the investigation of environmental enantioselective behaviors for chiral pesticides. In the present study, the enantiomer separation of 7 triazole fungicides, i.e., hexaconazole (1), triadimefon (2), tebuconazole (3), diniconazole (4), flutriafol (5), propiconazole (6), and difenoconazole (7), were evaluated using normal phase high-performance liquid chromatography. Chrialcel OD column and Chrialcel OJ column were used. The influence of column temperature was studied for the optimization of the resolution as well as the type and percentage of organic modifier in the mobile phase. The retention factors for the enantiomers of all investigated compounds decreased as the temperature increased. The natural logarithms of the selectivity factors (lnalpha) of hexaconazole (1), tebuconazole (3), flutriafol (5), propiconazole (6) and difenoconazole (7) depended linearly on the inverse of temperature (1/T) while the corresponding values for triadimefon (2) and diniconazole (4) kept unchanged in the studied temperature range 10-35 degrees C. Van't Hoff plots afforded thermodynamic parameters, such as the apparent change in enthalpy DeltaH degrees , the apparent change in entropy DeltaS degrees and the apparent change in DeltaDeltaH degrees and DeltaDeltaS degrees . The thermodynamic parameters (DeltaH degrees , DeltaS degrees , DeltaDeltaH degrees and DeltaDeltaS degrees ) were calculated in order to provide an understanding of the thermosynamic driving forces for enantioseparation. The established method shows perspective to be used for preparing micro-scale amount of pure enantiomers of the chiral triazoles studied.     

Minimization of cavity size ensures protein stability and folding: structures of Phe46-replaced bovine pancreatic RNase A

The Phe46 residue, located in the hydrophobic core of RNase A, was replaced with other hydrophobic residues, leucine, valine, or alanine, and their X-ray crystallographic structures were determined up to 1.50-1.80 A resolution in an attempt to examine the relationship between structural changes and conformational stability or folding kinetics. The backbone structure of F46L, F46V, and F46A was indistinguishable from that of the wild-type enzyme, retaining the correct active site structure. However, one water molecule was included in the hydrophobic core of F46A, forming two hydrogen bonds with the backbone peptide chain. The side chain of Met29 in F46V and F46A adopted two different conformations in an equal occupancy. A trapped water molecule and two conformations of Met29 represent changes that minimize the cavity volume. Nevertheless, the replacement of Phe46 with the above residues resulted in a marked decrease in both thermal stability and folding reaction. Thus, Phe46 ensures the thermal stability and the rapid and correct folding of RNase A by the role it plays in forming a highly packed, hydrophobic core.     

Desolvation and Development of Specific Hydrophobic Core Packing during Im7 Folding

Development of a tightly packed hydrophobic core drives the folding of water-soluble globular proteins and is a key determinant of protein stability. Despite this, there remains much to be learnt about how and when the hydrophobic core becomes desolvated and tightly packed during protein folding. We have used the bacterial immunity protein Im7 to examine the specificity of hydrophobic core packing during folding. This small, four-helix protein has previously been shown to fold via a compact three-helical intermediate state. Here, overpacking substitutions, in which residue side-chain size is increased, were used to examine the specificity and malleability of core packing in the folding intermediate and rate-limiting transition state. In parallel, polar groups were introduced into the Im7 hydrophobic core via Val→Thr or Phe→Tyr substitutions and used to determine the solvation status of core residues at different stages of folding. Over 30 Im7 variants were created allowing both series of substitutions to cover all regions of the protein structure. Φ-value analysis demonstrated that the major changes in Im7 core solvation occur prior to the population of the folding intermediate, with key regions involved in docking of the short helix III remaining solvent-exposed until after the rate-limiting transition state has been traversed. In contrast, overpacking core residues revealed that some regions of the native Im7 core are remarkably malleable to increases in side-chain volume. Overpacking residues in other regions of the Im7 core result in substantial (> 2.5 kJ mol^− 1) destabilisation of the native structure or even prevents efficient folding to the native state. This study provides new insights into Im7 folding; demonstrating that whilst desolvation occurs early during folding, adoption of a specifically packed core is achieved only at the very last step in the folding mechanism.     

Pressure- and temperature-induced unfolding studies: thermodynamics of core hydrophobicity and packing of ribonuclease A

In this work we demonstrate that heat and pressure induce only slightly different energetic changes in the unfolded state of RNase A. Using pressure and temperature as denaturants on a significant number of variants, and by determining the free energy of unfolding at different temperatures, we estimated the stability of variants unable to complete the unfolding transition owing to the experimental conditions required for pressure experiments. The overall set of results allowed us to map the contributions to stability of the hydrophobic core residues of RNase A, with the positions most critical for stability being V54, V57, I106 and V108. We also show that the stability differences can be attributed to both hydrophobic interactions and packing density with an equivalent energetic magnitude. The main hydrophobic core of RNase A is tightly packed, as shown by the small-to-large and isosteric substitutions. In addition, we found that large changes in the number of methylene groups have non-additive positive stability interaction energies that are consistent with exquisite tight core packing and rearrangements of van der Waals' interactions in the protein interior, even after drastic deleterious substitutions.     

Folding kinetics of T4 lysozyme and nine mutants at 12 degrees C.

The kinetics of unfolding and refolding of T4 lysozyme and nine of its mutants have been investigated as a function of guanidinium chloride concentration at 12 degrees C. All show simple two-state, first-order kinetics. Two types of mutants were studied: proline-alanine interchanges and substitutions at position 3 with side chains of varying hydrophobicity. Crystal structures are available for seven of the ten proteins. The effect of mutations on the folding kinetics is more pronounced and complex than on equilibrium thermodynamics. The proteins fall into two broad kinetic classes with one class rather close to the wild type. P86A is a mutant with marked changes in kinetics but only a very small change in stability. Since the 86 position is in the middle of an alpha-helix, the indications are that the helix containing an A residue is more stable in the transition state than one containing a P residue. The other mutants are more complicated, with the refolding and unfolding rates unequally affected by the mutations. On the basis of comparisons with other investigations, we conclude that the rate-determining step in the presence of guanidinium chloride is not the same as in aqueous solution and that it most likely precedes it. The indications are that we are studying the formation of a transition intermediate which is destabilized by the denaturant and which resembles the A intermediate of the framework or molten globule models for protein folding.     

Sequence–function relationships in folding upon binding

Folding coupled to binding is ubiquitous in biology. Nevertheless, the relationship of sequence to function for protein segments that undergo coupled binding and folding remains to be determined. Specifically, it is not known if the well-established rules that govern protein folding and stability are relevant to ligand-linked folding transitions. Upon small ligand biotinoyl-5′-AMP (bio-5′-AMP) binding the Escherichia coli protein BirA undergoes a disorder-to-order transition that results in formation of a network of packed hydrophobic side chains. Ligand binding is also allosterically coupled to protein association, with bio-5′-AMP binding enhancing the dimerization free energy by −4.0 kcal/mol. Previous studies indicated that single alanine replacements in a three residue hydrophobic cluster that contributes to the larger network disrupt cluster formation, ligand binding, and allosteric activation of protein association. In this work, combined equilibrium and kinetic measurements of BirA variants with alanine substitutions in the entire hydrophobic network reveal large functional perturbations resulting from any single substitution and highly non-additive effects of multiple substitutions. These substitutions also disrupt ligand-linked folding. The combined results suggest that, analogous to protein folding, functional disorder-to-order linked to binding requires optimal packing of the relevant hydrophobic side chains that contribute to the transition. The potential for many combinations of residues to satisfy this requirement implies that, although functionally important, segments of homologous proteins that undergo folding linked to binding can exhibit sequence divergence.     

The design of a hyperstable mutant of the Abp1p SH3 domain by sequence alignment analysis

We have characterized the thermodynamic stability of the SH3 domain from the Saccharomyces cerevisiae Abp1p protein and found it to be relatively low compared to most other SH3 domains, with a Tm of 60 degrees C and a deltaGu of 3.08 kcal/mol. Analysis of a large alignment of SH3 domains led to the identification of atypical residues at eight positions in the wild-type Abp1p SH3 domain sequence that were subsequently replaced by the residue seen most frequently at that position in the alignment. Three of the eight mutants constructed in this way displayed increases in Tm ranging from 8 to 15 degrees C with concomitant increases in deltaGu of up to 1.4 kcal/mol. The effects of these substitutions on folding thermodynamics and kinetics were entirely additive, and a mutant containing all three was dramatically stabilized with a Tm greater than 90 degrees C and a deltaGu more than double that of the wild-type domain. The folding rate of this hyperstable mutant was 10-fold faster than wild-type, while its unfolding rate was fivefold slower. All of the stabilized mutants were still able to bind a target peptide with wild-type affinity. We have analyzed the stabilizing amino acid substitutions isolated in this study and several other similar sequence alignment based studies. In approximately 25% of cases, increased stability can be explained by enhanced propensity of the substituted residue for the local backbone conformation at the mutagenized site.     

Sequence-dependent thermodynamic parameters for locked nucleic acid (LNA)-DNA duplex formation

The design of modified nucleic acid probes, primers, and therapeutics is improved by considering their thermodynamics. Locked nucleic acid (LNA) is one of the most useful modified backbones, with incorporation of a single LNA providing a substantial increase in duplex stability. In this work, the hybridization DeltaH(o), DeltaS(o), and melting temperature (T(M)) were measured from absorbance melting curves for 100 duplex oligonucleotides with single internal LNA nucleotides on one strand, and the results provided DeltaDeltaH(o), DeltaDeltaS(o), DeltaDelta, and DeltaT(M) relative to reference DNA oligonucleotides. LNA pyrimidines contribute more stability than purines, especially A(L), but there is substantial context dependence for each LNA base. Both the 5' and 3' neighbors must be considered in predicting the effect of an LNA incorporation, with purine neighbors providing more stability. Enthalpy-entropy compensation in DeltaDeltaH(o) and DeltaDeltaS(o) is observed across the set of sequences, suggesting that LNA can stabilize the duplex by either preorganization or improved stacking, but not both simultaneously. Singular value decomposition analysis provides predictive sequence-dependent rules for hybridization of singly LNA-substituted DNA oligonucleotides to their all-DNA complements. The results are provided as sets of DeltaDeltaH(o), DeltaDeltaS(o), and DeltaDelta parameters for all 32 of the possible nearest neighbors for LNA+DNA:DNA hybridization (5' MX(L) and 5' X(L)N, where M, N, and X = A, C, G, or T and X(L) represents LNA). The parameters are applicable within the standard thermodynamic prediction algorithms. They provide T(M) estimates accurate to within 2 degrees C for LNA-containing oligonucleotides, which is significantly better accuracy than previously available.     

Structural and thermodynamic analysis of the packing of two alpha-helices in bacteriophage T4 lysozyme

Packing interactions in bacteriophage T4 lysozyme were explored by determining the structural and thermodynamic effects of substitutions for Ala98 and neighboring residues. Ala98 is buried in the core of T4 lysozyme in the interface between two alpha-helices. The Ala98 to Val (A98V) replacement is a temperature-sensitive lesion that lowers the denaturation temperature of the protein by 15 degrees C (pH 3.0, delta delta G = -4.9 kcal/mol) and causes atoms within the two helices to move apart by up to 0.7 A. Additional structural shifts also occur throughout the C-terminal domain. In an attempt to compensate for the A98V replacement, substitutions were made for Val149 and Thr152, which make contact with residue 98. Site-directed mutagenesis was used to construct the multiple mutants A98V/T152S, A98V/V149C/T152S and the control mutants T152S, V149C and A98V/V149I/T152S. These proteins were crystallized, and their high-resolution X-ray crystal structures were determined. None of the second-site substitutions completely alleviates the destabilization or the structural changes caused by A98V. The changes in stability caused by the different mutations are not additive, reflecting both direct interactions between the sites and structural differences among the mutants. As an example, when Thr152 in wild-type lysozyme is replaced with serine, the protein is destabilized by 2.6 kcal/mol. Except for a small movement of Val94 toward the cavity created by removal of the methyl group, the structure of the T152S mutant is very similar to wild-type T4 lysozyme. In contrast, the same Thr152 to Ser replacement in the A98V background causes almost no change in stability. Although the structure of A98V/T152S remains similar to A98V, the combination of T152S with A98V allows relaxation of some of the strain introduced by the Ala98 to Val replacement. These studies show that removal of methyl groups by mutation can be stabilizing (Val98----Ala), neutral (Thr152----Ser in A98V) or destabilizing (Val149----Cys, Thr152----Ser). Such diverse thermodynamic effects are not accounted for by changes in buried surface area or free energies of transfer of wild-type and mutant side-chains. In general, the changes in protein stability caused by a mutation depend not only on changes in the free energy of transfer associated with the substitution, but also on the structural context within which the mutation occurs and on the ability of the surrounding structure to relax in response to the substitution.(ABSTRACT TRUNCATED AT 400 WORDS)     

Differential mechanisms of recognition and activation of interleukin-8 receptor subtypes

We have probed an epitope sequence (His18-Pro19-Lys20-Phe21) in interleukin-8 (IL-8) by site-directed mutagenesis. This work shows that single and double Ala substitutions of His18 and Phe21 in IL-8 reduced up to 77-fold the binding affinity to IL-8 receptor subtypes A (CXCR1) and B (CXCR2) and to the Duffy antigen. These Ala mutants triggered neutrophil degranulation and induced calcium responses mediated by CXCR1 and CXCR2. Single Asp or Ser substitutions, H18D, F21D, F21S, and double substitutions, H18A/F21D, H18A/F21S, and H18D/F21D, reduced up to 431-fold the binding affinity to CXCR1, CXCR2, and the Duffy antigen. Interestingly, double mutants with charged residue substitutions failed to trigger degranulation or to induce wild-type calcium responses mediated by CXCR1. Except for the H18A and F21A mutants, all other IL-8 mutants failed to induce superoxide production in neutrophils. This study demonstrates that IL-8 recognizes and activates CXCR1, CXCR2, and the Duffy antigen by distinct mechanisms.     

Functional analysis of the putative fusion domain of the baculovirus envelope fusion protein F

Group II nucleopolyhedroviruses (NPVs), e.g., Spodoptera exigua MNPV, lack a GP64-like protein that is present in group I NPVs but have an unrelated envelope fusion protein named F. In contrast to GP64, the F protein has to be activated by a posttranslational cleavage mechanism to become fusogenic. In several vertebrate viral fusion proteins, the cleavage activation generates a new N terminus which forms the so-called fusion peptide. This fusion peptide inserts in the cellular membrane, thereby facilitating apposition of the viral and cellular membrane upon sequential conformational changes of the fusion protein. A similar peptide has been identified in NPV F proteins at the N terminus of the large membrane-anchored subunit F(1). The role of individual amino acids in this putative fusion peptide on viral infectivity and propagation was studied by mutagenesis. Mutant F proteins with single amino acid changes as well as an F protein with a deleted putative fusion peptide were introduced in gp64-null Autographa californica MNPV budded viruses (BVs). None of the mutations analyzed had an major effect on the processing and incorporation of F proteins in the envelope of BVs. Only two mutants, one with a substitution for a hydrophobic residue (F152R) and one with a deleted putative fusion peptide, were completely unable to rescue the gp64-null mutant. Several nonconservative substitutions for other hydrophobic residues and the conserved lysine residue had only an effect on viral infectivity. In contrast to what was expected from vertebrate virus fusion peptides, alanine substitutions for glycines did not show any effect.     

Redesigning the folding energetics of a model three-helix bundle protein by site-directed mutagenesis

Because of their limited size and complexity, de novo designed proteins are particularly useful for the detailed investigation of folding thermodynamics and mechanisms. Here, we describe how subtle changes in the hydrophobic core of a model three-helix bundle protein (GM-0) alter its folding energetics. To explore the folding tolerance of GM-0 toward amino acid sequence variability, two mutant proteins (GM-1 and GM-2) were generated. In the mutants, cavities were created in the hydrophobic core of the protein by either singly (GM-1; L35A variant) or doubly (GM-2; L35A/I39A variant) replacing large hydrophobic side chains by smaller Ala residues. The folding of GM-0 is characterized by two partially folded intermediate states exhibiting characteristics of molten globules, as evidenced by pressure-unfolding and pressure-assisted cold denaturation experiments. In contrast, the folding energetics of both mutants, GM-1 and GM-2, exhibit only one folding intermediate. Our results support the view that simple but biologically important folding motifs such as the three-helix bundle can reveal complex folding plasticity, and they point to the role of hydrophobic packing as a determinant of the overall stability and folding thermodynamic of the helix bundle.     

Point mutation of alanine (31) to valine prohibits the folding of reduced lysozyme by sulfhydryl-disulfide interchange

In the preceding paper in this issue, we described the overproduction of one mutant chicken lysozyme in Escherichia coli. Since this lysozyme contained two amino acid substitutions (Ala31----Val and Asn106----Ser) in addition to an extra methionine residue at the NH2-terminus, the substituted amino acid residues were converted back to the original ones by means of oligonucleotide-directed site-specific mutagenesis and in vitro recombination. Thus, four kinds of chicken lysozyme [Met-1Val31Ser106-, Met-1Ser106-, Met-1Val31- and Met-1 (wild type)] were expressed in E. coli. From the results of folding experiments of the reduced lysozymes by sulfhydryl-disulfide interchange at pH 8.0 and 38 degrees C, followed by the specific activity measurements of the folded enzymes, the following conclusions can be drawn: (i) an extra methionine residue at the NH2-terminus reduces the folding rate but does not affect the lysozyme activity of the folded enzyme; (ii) the substitution of Asn106 by Ser decreases the activity to 58% of that of intact native lysozyme without changing the folding rate; and (iii) the substitution of Ala31 Val prohibits the correct folding of lysozyme. Since the wild type enzyme (Met-1-lysozyme) was activated in vitro without loss of specific activity, the systems described in this study (mutagenesis, overproduction, purification and folding of inactive mutant lysozymes) may be useful in the study of folding pathways, expression of biological activity and stability of lysozyme.     

Folding and stability of mutant scaffolding proteins defective in P22 capsid assembly.

Bacteriophage P22 scaffolding subunits are elongated molecules that interact through their C termini with coat subunits to direct icosahedral capsid assembly. The soluble state of the subunit exhibits a partially folded intermediate during equilibrium unfolding experiments, whose C-terminal domain is unfolded (Greene, B., and King, J. (1999) J. Biol. Chem. 274, 16135-16140). Four mutant scaffolding proteins exhibiting temperature-sensitive defects in different stages of particle assembly were purified. The purified mutant proteins adopted a similar conformation to wild type, but all were destabilized with respect to wild type. Analysis of the thermal melting transitions showed that the mutants S242F and Y214W further destabilized the C-terminal domain, whereas substitutions near the N terminus either destabilized a different domain or affected interactions between domains. Two mutant proteins carried an additional cysteine residue, which formed disulfide cross-links but did not affect the denaturation transition. These mutants differed both from temperature-sensitive folding mutants found in other P22 structural proteins and from the thermolabile temperature-sensitive mutants described for T4 lysozyme. The results suggest that the defects in these mutants are due to destabilization of domains affecting the weak subunit-subunit interactions important in the assembly and function of the virus precursor shell.