Biopolymer-Based Transdermal Films of Donepezil as an Alternative Delivery Approach in Alzheimer’s Disease Treatment

Matrix type transdermal films of donepezil (DNP) as an alternative delivery approach was designed to improve patient compliance to Alzheimer disease treatment. Sodium alginate, a natural polysaccharide, was used as matrix-forming agent in the optimization of transdermal films. Propylene glycol and dl-limonene was added into films as a plasticizer and permeation enhancer, respectively. As well as mechanical strength and bioadhesiveness of optimized transdermal films of DNP, the impact of dl-limonene concentration in films on DNP in vitro permeation across pig skin was assessed. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) measurements were carried out to examine the effects of enhancer on in vitro conformational order of the stratum corneum intercellular lipids following permeation study. Results showed that transdermal formulations of DNP were suitable due to both mechanical and bioadhesive features of the films. In vitro skin permeation study indicated that dl-limonene at a concentration of 3% was optimum with high drug flux. ATR-FTIR results confirmed a more fluidized stratum corneum lipid state in the presence of dl-limonene, indicating its permeation enhancement effect. Regarding to achieve therapeutic levels of DNP, it seems to be feasible deliver DNP with transdermal films for the management of Alzheimer disease.KEY WORDS: Alzheimer disease, donepezil, limonene, permeation enhancement, transdermal film     

Formulation,Physicochemical Characterization,and In Vitro Study of Chitosan/HPMC Blends-Based Herbal Blended Patches

The current work prepared chitosan/hydroxypropyl methylcellulose (HPMC) blends and studied the possibility of chitosan/HPMC blended patches for Zingiber cassumunar Roxb. The blended patches without/with crude Z. cassumunar oil were prepared by homogeneously mixing the 3.5% w/v of chitosan solution and 20% w/v of HPMC solution, and glycerine was used as plasticizer. Then, they were poured into Petri dish and produced the blended patches in hot air oven at 70 ± 2°C. The blended patches were tested and evaluated by the physicochemical properties: moisture uptake, swelling ratio, erosion, porosity, Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction, and photographed the surface and cross-section morphology under SEM technique. Herbal blended patches were studied by the in vitro release and skin permeation of active compound D. The blended patches could absorb the moisture and became hydrated patches that occurred during the swelling of blended patches. They were eroded and increased by the number of porous channels to pass through out for active compound D. In addition, the blended patches indicated the compatibility of the blended ingredients and homogeneous smooth and compact. The blended patches made from chitosan/HPMC blends provide a controlled release and skin permeation behavior of compound D. Thus, the blended patches could be suitably used for herbal medicine application.KEY WORDS: chitosan, formulation, herbal blended patches, HPMC, Zingiber cassumunar Roxb     

Drug in Adhesive Patch of Zolmitriptan: Formulation and In vitro /In vivo Correlation

The objective of the present study was to develop transdermal patch for zolmitriptan, determine its in vivo absorption using the rabbit skin. Solvent evaporation technique prepared zolmitriptan patch was settled in two-chamber diffusion cell combined with excised rabbit abdomen skin for permeation study. A sufficient cumulative penetration amount of zolmitriptan (258.5 ± 26.9 μg/cm² in 24 h) was achieved by the formulation of 4% zolmitriptan, 10% Azone, and adhesive of DURO-TAK® 87–4098. Pharmacokinetic parameters were determined via i.v. and transdermal administrations using animal model of rabbit. The results revealed that the absolute bioavailability was about 63%. Zolmitriptan could be detected with drug level of 88 ± 51 ng/mL after transdermal administration of 15 min. The in vivo absorption curve obtained by deconvolution approach using WinNonlin® program was correlated well with the in vitro permeation curve, the correlation coefficient R is 0.84, and the result indicated that in vitro skin permeation experiments were useful to predict the in vivo performance. In addition, little skin irritation was found in the irritation study. As a conclusion, the optimized zolmitriptan transdermal patches could effectively deliver adequate drug into systemic circulation in short time without producing any irritation phenomenon and worth to be developed.KEY WORDS: chemical enhancer, drug-in-adhesive patch, in vitro/in vivo correlation, pharmacokinetic, zolmitriptan     

The Control of Skin-Permeating Rate of Bisoprolol by Ion-Pair Strategy for Long-Acting Transdermal Patches

A moderate drug permeating rate (flux) is desirable for long-acting transdermal patches. In this work, a novel simple method of controlling bisoprolol (BSP) flux by ion-pair strategy was initiated. Different ion-pair complexes including bisoprolol maleate (BSP-M), bisoprolol tartarate, bisoprolol besilate, and bisoprolol fumarate were prepared and their fluxes through rabbit abdominal skin were determined separately in vitro. Furthermore, permeation behavior from isopropyl myristate, solubility index in pressure-sensitive adhesives, determined by DSC, and n-octanol/water partition coefficient (log P) were investigated to illustrate the mechanism of drug permeation rate controlling. The results showed that compared to free BSP (J = 25.98 ± 2.34 μg/cm²/h), all BSP ion-pair complexes displayed lower and controllable flux in the range of 0.11 to 4.19 μg/cm²/h. After forming ion-pair complexes, the capability of BSP to penetrate through skin was weakened due to the lowered log P and increased molecule weight. Accordingly, this study has demonstrated that the flux of BSP could be controlled by ion-pair strategy, and among all complexes investigated, BSP-M was the most promising candidate for long-acting transdermal patches.Key words: bisoprolol, flux, ion-pair, transdermal     

Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method

A selectively cross-linking method, which is based on the “di–diol” interaction between poly(vinyl alcohol) and borate and the strong electrostatic interaction between chitosan and tripolyphosphate, was developed. Chitosan/poly(vinyl alcohol) films cross-linked separately with borate, tripolyphosphate and borate/tripolyphosphate were then prepared in terms of this method. Water vapor permeation, mechanical strength, surface morphology and molecular interactions of the films were studied by water permeation test, texture test, atomic force microscopy and ATR-FTIR spectroscopy. With the introduction of cross-linking structure, there is a large improvement in elastic modulus from 271 ± 14.2 to 551 ± 14.7 MPa and a large decrease in water vapor permeability from (5.41 ± 0.21) × 10⁻⁷ g/m h Pa to (3.12 ± 0.24) × 10⁻⁷ g/m h Pa of chitosan/poly(vinyl alcohol) films. The surface morphology of the cross-linked films exhibits a nanoparticle aggregation structure. The size and aggregation behavior of these nanoparticles are strongly related to the type of cross-linker. Furthermore, ATR-FTIR results indicate that strong interaction between polymer matrix and cross-linker exists in our system. This work provides a simple and efficient way to prepare chitosan/poly(vinyl alcohol) films with controllable network structure.     

An Explanation for the Difference in the Percutaneous Penetration Behavior of Tamsulosin Induced by Two Different O-Acylmenthol Derivatives

Using tamsulosin (TAL) as a model drug, the aim of this study was to investigate and compare the percutaneous permeation behavior of two menthol derivatives, 2-isopropyl-5-methylcyclohexyl heptanoate (M-HEP) and 2-isopropyl-5-methylcyclohexyl decanoate (M-DEC). In vitro transdermal permeation study was carried out using porcine skin. The residual amount of enhancers in the skin after permeation experiment was determined by gas chromatographic (GC) method. The penetration depths of fluorescein were visualized by two-photon confocal laser scanning microscopy (2P-LSM) after the skin being treated with different enhancers. Furthermore, changes in the stretching frequency of functional group of ceramide were investigated by using attenuated total reflectance Fourier transform infrared (ATR-FTIR) technique. After M-HEP addition, the cumulative amount of TAL permeated in 8 h (Q₈) reached 20.57 ± 0.54 μg/cm² and the depth of fluorescein was 40 μm; the CH₂ of ceramide symmetric stretching frequency was 4 cm⁻¹ blue shifted. However, M-DEC has an opposite effect on TAL permeation compared with that of M-HEP. TAL is a crucial factor affecting permeation procedure, and microenvironment of lipid region determines promotion capability of the enhancers.Key words: enhancer, mechanism, menthol derivative, retardant, transdermal     

Preparation and Evaluation of Diltiazem Hydrochloride Diffusion-Controlled Transdermal Delivery System

The objective was to investigate the suitable polymeric films for the development of diltiazem hydrochloride (diltiazem HCl) transdermal drug delivery systems. Hydroxypropyl methylcellulose (HPMC) and ethylcellulose (EC) were used as hydrophilic and hydrophobic film formers, respectively. Effects of HPMC/EC ratios and plasticizers on mechanical properties of free films were studied. Effects of HPMC/EC ratios on moisture uptake, in vitro release and permeation through pig ear skin of diltiazem HCl films were evaluated. Influence of enhancers including isopropyl myristate (IPM), isopropyl palmitate (IPP), N-methyl-2-pyrrolidone, oleic acid, polyethylene glycol 400, propylene glycol, and Tween80 on permeation was evaluated. It was found that addition of EC into HPMC film produced lower ultimate tensile strength, percent elongation at break and Young’s modulus, however, addition of EC up to 60% resulted in too hard film. Plasticization with dibutyl phthalate (DBP) produced higher strength but lower elongation as compared to triethyl citrate. The moisture uptake and initial release rates (0–1 h) of diltiazem HCl films decreased with increasing the EC ratio. Diltiazem HCl films (10:0, 8:2 and 6:4 HPMC/EC) were studied for permeation because of the higher release rate. The 10:0 and 8:2 HPMC/EC films showed the comparable permeation-time profiles, and had higher flux values and shorter lag time as compared to 6:4 HPMC/EC film. Addition of IPM, IPP or Tween80 could enhance the fluxes for approx. three times while Tween80 also shorten the lag time. In conclusion, the film composed of 8:2 HPMC/EC, 30% DBP and 10% IPM, IPP or Tween80 loaded with 25% diltiazem HCl should be selected for manufacturing transdermal patch by using a suitable adhesive layer and backing membrane. Further in vitro permeation and in vivo performance studies are required.     

Design and Characterization of an Adhesive Matrix Based on a Poly(Ethyl Acrylate, Methyl Methacrylate)

The main issue in the development of transdermal patches made of poly(ethyl acrylate, methyl methacrylate) (Eudragit NE 40D, PMM) is the shrinkage phenomenon during the spreading of the latex onto the release liner. To solve this problem, the latex is usually freeze-dried and then re-dissolved in an organic solvent (method 1). To simplify the production process, we prepared an adhesive matrix by adding to the commercial PMM latex a plasticizer and an additive (anti-shrinkage agent) that avoids the shrinkage of the water dispersion spread onto the release liner (method 2). In some cases the active ingredient itself, such as potassium diclofenac (DK) and nicotine (NT), works as anti-shrinkage agent. In this work, the effects of the preparation method, types and concentrations of the plasticizer (triacetin and tributyl citrate) on the adhesive properties of the transdermal patches were investigated. The adhesive properties of the prepared patch were determined by texture analysis, peel adhesion test and shear adhesion. The PMM/plasticizer interactions were evaluated by ATR-FTIR spectroscopy. Furthermore, the in vitro skin permeation profiles of DK and NT released from the patch were determined by Franz cell method. Generally speaking, the variables that mainly modify the adhesive properties are the concentration and type of the plasticizer. The skin permeation profiles of DK and NT from the patch prepared by method 2 overlapped with those obtained with the commercial products. The results underline that the PMM latex can be used conveniently in the development of transdermal patches.     

Development and Evaluation of Curcumin-loaded Elastic Vesicles as an Effective Topical Anti-inflammatory Formulation

Curcumin has diverse biological activities including antioxidant and anti-inflammatory activity. However, its clinical use for topical application is limited due to its poor aqueous solubility and thus, minimal cutaneous bioavailability. Elastic vesicles (EVs) of curcumin were prepared to improve its cutaneous bioavailability and to use it for topical anti-inflammatory effect. Ex vivo skin permeation and retention studies were performed to check if incorporation of curcumin into EVs could improve its permeation into and retention in the skin. Evaluation of acute and chronic anti-inflammatory effect was done using xylene-induced acute ear edema in mice and cotton pellet-induced chronic inflammation in rats, respectively. A significant improvement in flux (nine times) across murine skin was observed when aqueous dispersion of curcumin (flux − 0.46 ± 0.02 μg/h/cm²) was compared with curcumin-loaded EVs (flux − 4.14 ± 0.04 μg/h/cm² ). Incorporation of these curcumin-loaded EVs into a hydrophilic ointment base resulted in higher skin retention (51.66%) in contrast to free curcumin ointment (1.64%) and a marketed formulation (VICCO® turmeric skin cream). The developed ointment showed an effect similar (p < 0.05) to the marketed diclofenac sodium ointment (Omni-gel®) in suppression of acute inflammation in mouse; a significant inhibition (28.8% versus 3.91% for free curcumin) of cotton pellet-induced chronic inflammation was also observed. Thus, curcumin-loaded EVs incorporated in hydrophilic ointment is a promising topical anti-inflammatory formulation.KEY WORDS: anti-inflammatory, curcumin, elastic vesicles, topical formulation     

Formulation development and in vitro and in vivo evaluation of membrane-moderated transdermal systems of ampicillin sodium in ethanol: pH 4.7 buffer solvent system

The objective of the present study was to develop membrane-moderated transdermal systems of ampicillin sodium and to evaluate them with respect to various in vitro and in vivo parameters. The membrane-type transdermal systems were prepared using a drug with various antinucleant polymers— hydroxypropyl methylcellulose (HPMC), methylcellulose (MC), cellulose acetate phthalate, chitosan, sodium alginate (SA), and sodium carboxymethylcellulose—in an ethanol: pH 4.7 buffer volatile system by the solvent evaporation technique with HPMC as the rate-controlling membrane for all the systems. The swelling properties of the polymers were studied, and drug-polymer interaction studies were performed. The patches were subjected to various physicochemical studies, in vitro release studies, permeation studies, and skin irritation studies. The best patch among the formulations was selected for further in vivo studies. Compared to the other patches, SA exhibited the highest moisture content at 16%; a 21% moisture uptake was found with MC. The release and permeation of the drug from the SA patch was found to be the maximum. The in vivo study of the SA patch exhibited a peak plasma concentration C_max of 126 μg/mL at T_max 4 hours. Hence, it can be concluded that hydrophilic ampicillin sodium can be developed as a transdermal delivery system with SA that is an alternative to intravenous administration and has minimal adverse effects. Published: January 26, 2007     

Solid lipid nanoparticles for transdermal delivery of avanafil: optimization,formulation, in-vitro and ex-vivo studies

Context: Avanafil (AVA) is used in the treatment of erectile dysfunction, but is reported for its poor aqueous solubility. Solid lipid nanoparticles (SLNs) are lipid carriers that can greatly enhance drug solubility and bioavailability.

Objective: This work was aimed to formulate and optimize AVA SLNs with subsequent loading into hydrogel films for AVA transdermal delivery.

Materials and methods: AVA SLNs were prepared utilizing homogenization followed by ultra-sonication technique. The prepared SLNs were characterized for particle size, charge, surface morphology and drug content. The optimized SLNs formulation was incorporated into transdermal films prepared using HPMC and chitosan. Hydrogel films were evaluated for ex-vivo rat skin permeation using automated Franz diffusion cells. The permeation parameters and the release mechanism were evaluated. The transdermal permeation of the prepared AVA SLNs through the skin layers was studied using confocal laser scanning microscope.

Results: Lipid concentration and % of oil in lipid had a pronounced effect on particle size while, entrapment efficiency was significantly affected by lipid concentration and % of cholesterol. The optimized AVA SLNs showed particle size and entrapment efficiency of 86?nm and 85.01%, respectively. TEM images revealed spherecity of the particles. High permeation parameters were observed from HPMC films loaded with AVA SLNs. The release data were in favor of Higuchi diffusion model. The prepared AVA SLNs were able to penetrate deeper in skin layers.

Conclusion: HPMC transdermal film-loaded AVA SLNs is an effective and alternative to per-oral drug administration.     

Transdermal therapeutic system of carvedilol: Effect of hydrophilic and hydrophobic matrix on in vitro and in vivo characteristics

The purpose of this research was to develop a matrix-type transdermal therapeutic system containing carvedilol with different ratios of hydrophilic and hydrophobic polymeric combinations by the solvent evaporation technique. The physicochemical compatibility of the drug and the polymers was studied by infrared spectroscopy and differential scanning calorimetry. The results suggested no physicochemical incompatibility between the drug and the polymers. In vitro permeation studies were performed by using Franz diffusion cells. The results followed Higuchi kinetics (r=0.9953−0.9979), and the mechanism of release was diffusion mediated. Based on physicochemical and in vitro skin permeation studies, patches coded as F3 (ethyl cellulose: polyvinylpyr-rolidone, 7.5∶2.5) and F6 (Eudragit RL:Eudragit RS, 8∶2) were chosen for further in vivo studies. The bioavailability studies in rats indicated that the carvedilol transdermal patches provided steady-state plasma concentrations with minimal fluctuations and improved bioavailability of 71% (for F3) and 62% (for F6) in comparison with oral administration. The antihypertensive activity of the patches in comparison with that of oral carvedilol was studied using methyl prednisolone acetate—induced hypertensive rats. It was observed that both the patches significantly controlled hypertension from the first hour (P<.05). The developed transdermal patches increase the efficacy of carvedilol for the therapy of hypertension. Published; January 19, 2007     

Comparative Evaluation of Porous Versus Nonporous Mucoadhesive Films as Buccal Delivery System of Glibenclamide

The present research work focused on the comparative assessment of porous versus nonporous films in order to develop a suitable buccoadhesive device for the delivery of glibenclamide. Both films were prepared by solvent casting technique using the 3² full factorial design, developing nine formulations (F1–F9). The films were evaluated for ex vivo mucoadhesive force, ex vivo mucoadhesion time, in vitro drug release (using a modified flow-through drug release apparatus), and ex vivo drug permeation. The mucoadhesive force, mucoadhesion time, swelling index, and tensile strength were observed to be directly proportional to the content of HPMC K4M. The optimized porous film (F4) showed an in vitro drug release of 84.47 ± 0.98%, ex vivo mucoadhesive force of 0.24 ± 0.04 N, and ex vivo mucoadhesion time of 539.11 ± 3.05 min, while the nonporous film (NF4) with the same polymer composition showed a release of 62.66 ± 0.87%, mucoadhesive force of 0.20 ± 0.05 N, and mucoadhesive time of 510 ± 2.00 min. The porous film showed significant differences for drug release and mucoadhesion time (p < 0.05) versus the nonporous film. The mechanism of drug release was observed to follow non-Fickian diffusion (0.1 < n < 0.5) for both porous and nonporous films. Ex vivo permeation studies through chicken buccal mucosa indicated improved drug permeation in porous films versus nonporous films. The present investigation established porous films to be a cost-effective buccoadhesive delivery system of glibenclamide.KEY WORDS: buccoadhesive drug delivery, glibenclamide, in vitro release and ex vivo permeation, porous film     

Influence of the Component Excipients on the Quality and Functionality of a Transdermal Film Formulation

The influence of formulation variables, i.e., a hydrophilic polymer (Methocel^® E15) and a film-forming polymer (Eudragit^® RL 100 and Eudragit^® RS 100), on the physicochemical and functional properties of a transdermal film formulation was assessed. Several terpenes were initially evaluated for their drug permeation enhancement effects on the transdermal film formulations. d-Limonene was found to be the most efficient permeation enhancer among the tested terpenes. Transdermal film formulations containing granisetron (GRN) as a model drug, d-limonene as a permeation enhancer, and different ratios of a hydrophilic polymer (Methocel^® E15) and a film-forming polymer (Eudragit^® RL 100 or Eudragit^® RS 100) were prepared. The prepared films were evaluated for their physicochemical properties such as weight variation, thickness, tensile strength, folding endurance, elongation (%), flatness, moisture content, moisture uptake, and the drug content uniformity. The films were also evaluated for the in vitro drug release and ex vivo drug permeation. The increasing ratios of Methocel^®:Eudragit^® polymers in the formulation linearly and significantly increased the moisture content, moisture uptake, water vapor transmission rate (WVTR), and the transdermal flux of GRN from the film formulations. Increasing levels of Methocel^® in the formulations also increased the rate and extent of the GRN release and the GRN permeation from the prepared films.KEY WORDS: film-forming polymers, hydrophilic polymers, permeation enhancers, transdermal films     

Novel Sunifiram-carbamate hybrids as potential dual acetylcholinesterase inhibitor and NMDAR co-agonist: simulation-guided analogue design and pharmacological screening

An efficient method for synthesising NMDAR co-agonist Sunifiram (DM235), in addition to Sunifram-carbamate and anthranilamide hybrids, has been developed in high yields via protecting group-free stepwise unsymmetric diacylation of piperazine using N-acylbenzotiazole. Compounds 3f, 3d, and 3i exhibited promising nootropic activity by enhancing acetylecholine (ACh) release in A549 cell line. Moreover, the carbamate hybrid 3f was found to exhibit higher in vitro potency than donepezil with IC₅₀ = 18 ± 0.2 nM, 29.9 ± 0.15 nM for 3f and donepezil, respectively. 3f was also found to effectively inhibit AChE activity in rat brain (AChE = 1.266 ng/mL) compared to tacrine (AChE = 1.137 ng/ml). An assessment of the ADMET properties revealed that compounds 3f, 3d, and 3i are drug-like and can penetrate blood–brain barrier. Findings presented here showcase highly potential cholinergic agents, with expected partial agonist activity towards glycine binding pocket of NMDAR which could lead to development and optimisation of novel nootropic drugs.     

Enhanced Topical Delivery of Finasteride Using Glyceryl Monooleate-Based Liquid Crystalline Nanoparticles Stabilized by Cremophor Surfactants

The aim of this study was to investigate the capability of two surfactants, Cremophor RH 40 (RH) and Cremophor EL (EL), to prepare liquid crystalline nanoparticles (LCN) and to study its influence on the topical delivery of finasteride (FNS). FNS-loaded LCN was formulated with the two surfactants and characterized for size distribution, morphology, entrapment efficiency, in vitro drug release, and skin permeation/retention. Influence of FNS-loaded LCN on the conformational changes on porcine skin was also studied using attenuated total reflectance Fourier-transform infrared spectroscopy. Transmission electron microscopical image confirmed the formation of LCN. The average particle size of formulations was in the range of 165.1–208.6 and 153.7–243.0 nm, respectively. The formulations prepared with higher surfactant concentrations showed faster release and significantly increased skin permeation. Specifically, LCN prepared with RH 2.5% presented higher permeation flux (0.100 ± 0.005 μgcm⁻²h⁻¹) compared with lower concentration (0.029 ± 0.007 μgcm⁻²h⁻¹). Typical spectral bands of lipid matrix of porcine skin were shifted to higher wavenumber, indicating increased degree of disorder of the lipid acyl chains which might cause fluidity increase of stratum corneum. Taken together, Cremophor surfactants exhibited a promising potential to stabilize the LCN and significantly augmented the skin permeation of FNS.KEY WORDS: Cremophor, finasteride, liquid crystalline nanoparticles, skin permeation–retention     

Influence of Critical Parameters of Nanosuspension Formulation on the Permeability of a Poorly Soluble Drug through the Skin—A Case Study

In transdermal drug delivery systems, it is always a challenge to achieve stable and prolonged high permeation rates across the skin since the concentrations of the drug dissolved in the matrix have to be high in order to maintain zero order release kinetics. Several attempts have been reported to improve the permeability of poorly soluble drug compounds using supersaturated systems. However, due to thermodynamic challenges, there was a high tendency for the drug to nucleate immediately after formulating or even during storage. The present study focuses on the efficiency of nanoparticles and influence of different concentrations of solubilizer such as vitamin E TPGS (d-a-tocopheryl polyethylene glycol 1000 succinate) to improve the permeation rate through the skin. Effects of several formulation factors were studied on the nanosuspension systems using ibuprofen as a model drug. The overall permeation enhancement process through the skin was influenced mostly by the solubilizer and also by the size of nanoparticles. The gel formulation developed with vitamin E TPGS + HPMC nanosuspension, consequently represent a promising approach aiming to improve the permeability performance of a poorly water soluble drug candidate.KEY WORDS: dermal drug delivery, human skin, nanosuspension, permeation rate, porcine skin, vitamin E TPGS     

Design and In Vitro Evaluation of Finasteride-Loaded Liquid Crystalline Nanoparticles for Topical Delivery

In this study, liquid crystalline nanoparticles (LCN) have been proposed as new carrier for topical delivery of finasteride (FNS) in the treatment of androgenetic alopecia. To evaluate the potential of this nanocarrier, FNS-loaded LCN was prepared by ultrasonication method and characterized for size, shape, in vitro release, and skin permeation–retention properties. The particle size ranged from 153.8 to 170.2 nm with a cubical shape and exhibited controlled release profile with less than 20% of the drug released in the first 24 h. The release profile was significantly altered with addition of different additives. Formulation with lower monoolein exhibited higher skin permeation with a flux rate of 0.061 ± 0.005 μg cm⁻² h⁻¹ in 24 h. The permeation however, significantly increased with glycerol, propylene glycol, and polyethylene glycol 400, while it declined for the addition of oleic acid. A similar trend was observed with skin retention study. In conclusion, FNS-loaded LCN could be advocated as a viable alternative for oral administration of the drug.Key words: androgenetic alopecia, finasteride, liquid crystalline nanoparticles, release, skin permeation–retention     

Formulation of Niosomal Gel for Enhanced Transdermal Lopinavir Delivery and Its Comparative Evaluation with Ethosomal Gel

The aim was to develop niosomal gel as a transdermal nanocarrier for improved systemic availability of lopinavir. Niosomes were prepared using thin-film hydration method and optimized for molar quantities of Span 40 and cholesterol to impart desirable characteristics. Comparative evaluation with ethosomes was performed using ex vivo skin permeation, fluorescence microscopy, and histopathology studies. Clinical utility via transdermal route was acknowledged using in vivo bioavailability study in male Wistar rats. The niosomal formulation containing lopinavir, Span 40, and cholesterol in a molar ratio of 1:0.9:0.6 possessed optimally high percentage of drug entrapment with minimum mean vesicular diameter. Ex vivo skin permeation studies of lopinavir as well as fluorescent probe coumarin revealed a better deposition of ethosomal carriers but a better release with niosomal carriers. Histopathological studies indicated the better safety profile of niosomes over ethosomes. In vivo bioavailability study in male Wistar rats showed a significantly higher extent of absorption (AUC_0→∞, 72.87 h × μg/ml) of lopinavir via transdermally applied niosomal gel as compared with its oral suspension. Taken together, these findings suggested that niosomal gel holds a great potential of being utilized as novel, nanosized drug delivery vehicle for transdermal lopinavir delivery.KEY WORDS: ethosomes, lopinavir, niosomes, transdermal     

Synthesis and biological evaluation of 2-arylbenzofuran derivatives as potential anti-Alzheimer’s disease agents

Alzheimer''s disease (AD) is a type of progressive dementia caused by degeneration of the nervous system. A single target drug usually does not work well. Therefore, multi-target drugs are designed and developed so that one drug can specifically bind to multiple targets to ensure clinical effectiveness and reduce toxicity. We synthesised a series of 2-arylbenzofuran derivatives and evaluated their in vitro activities. 2-Arylbenzofuran compounds have good dual cholinesterase inhibitory activity and β-secretase inhibitory activity. The IC₅₀ value of compound 20 against acetylcholinesterase inhibition (0.086 ± 0.01 µmol·L⁻¹) is similar to donepezil (0.085 ± 0.01 µmol·L⁻¹) and is better than baicalein (0.404 ± 0.04 µmol·L⁻¹). And most of the compounds have good BACE1 inhibitory activity, of which 3 compounds (8, 19 and 20) show better activity than baicalein (0.087 ± 0.03 µmol·L⁻¹). According to experimental results, 2-arylbenzofuran compounds provide an idea for drug design to develop prevention and treatment for AD.