Parameters determining the efficiency of gene targeting in the moss Physcomitrella patens

In the moss Physcomitrella patens, transforming DNA containing homologous sequences integrates predominantly by homologous recombination with its genomic target. A systematic investigation of the parameters that determine gene targeting efficiency shows a direct relationship between homology length and targeting frequency for replacement vectors (a selectable marker flanked by homologous DNA). Overall homology of only 1 kb is sufficient to achieve a 50% yield of targeted transformants. Targeting may occur through homologous recombination in one arm, accompanied by non-homologous end-joining by the other arm of the vector, or by allele replacement following two homologous recombination events. Allele replacement frequency depends on the symmetry of the targeting vector, being proportional to the length of the shorter arm. Allele replacement may involve insertion of multiple copies of the transforming DNA, accompanied by ectopic insertions at non-homologous sites. Single-copy and single insertions at targeted loci (targeted gene replacements, ‘TGR’) occur with a frequency of 7–20% of all transformants when the minimum requirements for allele replacement are met. Homologous recombination in Physcomitrella is substantially more efficient than in any multicellular eukaryote, recommending it as the outstanding model for the study of homologous recombination in plants.     

Efficient gene targeting in the filamentous fungusAlternaria alternata

To characterize homologous recombination of transforming DNA in the filamentous fungusAlternaria alternata, we have compared the frequencies of gene targeting by circular and linear DNA fragments in the fungus. TheA. alternata BRM1 gene, which is an essential gene for melanin biosynthesis, was selected as a target locus.BRM1 targeting events are easily identified because loss of function leads to a change in mycelial color from black to light brown. We constructed targeting vectors by inserting 0.6 to 3.1 kb internalBRM1 segments into a plasmid containing the hygromycin B phosphotransferase gene. When circular plasmids were used, melanin-deficient (Me1^?) transformants accounted for 30 to 80% of hygromycin B-resistant (Hy^R) transformants, correlating closely with the size of theBRM1 segment in the transforming DNA. Restriction enzyme digestion within theBRM1 region greatly enhanced the frequency of gene targeting: integration of the linear plasmids was almost completely attributable to homologous recombination, regardless of the size of theBRM1 segments. Plasmids carrying bothBRM1 segments and rDNA segments were transformed into the fungus to examine the effect of the number of target copies on homologous recombination. Using the circular plasmids, Me1^? transformants accounted for only 5% of Hy^R transformants. In contrast, when the linear plasmid produced by restriction enzyme digestion within theBRM1 segment was used, almost all transformants were Me1^?. These results indicate that homologous integration of circular molecules inA. alternata is sensitive to the length of homology and the number of targets, and that double-strand breaks in transforming DNA greatly enhance homologous recombination.     

Generation and identification of DNA sequence flanking T-DNA integration site of Trichoderma atroviride mutants with high dichlorvos-degrading capacity

A protocol for efficient Agrobacterium tumefaciens-mediated transformation (ATMT) of biocontrol fungus Trichoderma atroviride strain T23 was developed to construct mutants with improved dichlorvos-degradation ability. A transformation frequency of 5 × 10⁻⁶ was achieved. Among 110 genetically stable T-DNA transformants of T. atroviride T23, two transformants, AMT-12 and AMT-28, confirmed by Southern blot analysis to have single-copy inserts of T-DNA, showed an increase in dichlorvos-degradation ability of more than 10% compared to that of the wild type, exhibited similar tolerance to the pesticide, but lower spore formation ability. Five transformants exhibited a reduction in degradation of more than 70%, exhibited wild-type spore formation, and tolerated up to 800 μg/mL of dichlorvos. The left-flanking sequence of the insertion site in AMT-12 was cloned as a 1845-bp fragment and shown to have 89% identity to the DNA from T. atroviride IMI 206040; however, the involvement of this DNA in dichlorvos degradation remains still to be determined. This study can promote both a more efficient isolation of DNA sequence flanking T-DNA integration site in T. atroviride mutants and a more rational utilization of these transformants in dichlorvos degradation.     

Shuffled antibody libraries created by in vivo homologous recombination and yeast surface display

Homologous recombination in yeast can be exploited to reliably generate libraries of >10⁷ transformants from a pool of PCR products and a linearized plasmid vector. Homology in the PCR insertion products drives shuffling of these genes in vivo by yeast homologous recombination. Two scFvs that share 89.8% homology were shuffled in vivo by homologous recombination, and chimeric genes were generated regardless of whether or not one of the scFv PCR products lacked 5′ homology to the cut vector and the second scFv PCR product lacked 3′ homology to the cut vector, or both PCR products had both 5′ and 3′ homology to the cut vector. A majority of the chimeras had single crossovers; however, double and triple crossovers were isolated. Crossover points were evenly distributed in the hybrids created and homology of as little as two nucleotides was able to produce a chimeric clone. The numbers of clones isolated with a given number of crossovers was approximated well by a Poisson distribution. Transformation efficiencies for the chimeric libraries were of the order of 10⁴–10⁵ transformants per microgram of insert, which is the same order of magnitude as when a single PCR product is inserted alone into the display vector by homologous recombination. This method eliminates ligation and Escherichia coli transformation steps of previous methods for generating yeast-displayed libraries, requires fewer PCR cycles than in vitro DNA shuffling and, unlike site-specific recombination methods, allows for recombination anywhere that homology exists between the genes to be recombined. This simple technique should prove useful for protein engineering in general and antibody engineering, specifically in yeast.     

Extensive homologous recombination between introduced and native regulatory plastid DNA elements in transplastomic plants

Homologous recombination within plastids directs plastid genome transformation for foreign gene expression and study of plastid gene function. Though transgenes are generally efficiently targeted to their desired insertion site, unintended homologous recombination events have been observed during plastid transformation. To understand the nature and abundance of these recombination events, we analyzed transplastomic tobacco lines derived from three different plastid transformation vectors utilizing two different loci for foreign gene insertion. Two unintended recombinant plastid DNA species were formed from each regulatory plastid DNA element included in the transformation vector. Some of these recombinant DNA species accumulated to as much as 10–60% of the amount of the desired integrated transgenic sequence in T0 plants. Some of the recombinant DNA species undergo further, “secondary” recombination events, resulting in an even greater number of recombinant plastid DNA species. The abundance of novel recombinant DNA species was higher in T0 plants than in T1 progeny, indicating that the ancillary recombination events described here may have the greatest impact during selection and regeneration of transformants. A line of transplastomic tobacco was identified containing an antibiotic resistance gene unlinked from the intended transgene insertion as a result of an unintended recombination event, indicating that the homologous recombination events described here may hinder efficient recovery of plastid transformants containing the desired transgene. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Efficient Library Construction by In Vivo Recombination with a Telomere-Originated Autonomously Replicating Sequence of Hansenula polymorpha

A high frequency of transformation and an equal gene dosage between transformants are generally required for activity-based selection of mutants from a library obtained by directed evolution. An efficient library construction method was developed by using in vivo recombination in Hansenula polymorpha. Various linear sets of vectors and insert fragments were transformed and analyzed to optimize the in vivo recombination system. A telomere-originated autonomously replicating sequence (ARS) of H. polymorpha, reported as a recombination hot spot, facilitates in vivo recombination between the linear transforming DNA and chromosomes. In vivo recombination of two linear DNA fragments containing the telomeric ARS drastically increases the transforming frequency, up to 10-fold, compared to the frequency of circular plasmids. Direct integration of the one-end-recombined linear fragment into chromosomes produced transformants with single-copy gene integration, resulting in the same expression level for the reporter protein between transformants. This newly developed in vivo recombination system of H. polymorpha provides a suitable library for activity-based selection of mutants after directed evolution.     

Efficient gene targeting in the filamentous fungusAlternaria alternata

To characterize homologous recombination of transforming DNA in the filamentous fungusAlternaria alternata, we have compared the frequencies of gene targeting by circular and linear DNA fragments in the fungus. TheA. alternata BRM1 gene, which is an essential gene for melanin biosynthesis, was selected as a target locus.BRM1 targeting events are easily identified because loss of function leads to a change in mycelial color from black to light brown. We constructed targeting vectors by inserting 0.6 to 3.1 kb internalBRM1 segments into a plasmid containing the hygromycin B phosphotransferase gene. When circular plasmids were used, melanin-deficient (Me1^–) transformants accounted for 30 to 80% of hygromycin B-resistant (Hy^R) transformants, correlating closely with the size of theBRM1 segment in the transforming DNA. Restriction enzyme digestion within theBRM1 region greatly enhanced the frequency of gene targeting: integration of the linear plasmids was almost completely attributable to homologous recombination, regardless of the size of theBRM1 segments. Plasmids carrying bothBRM1 segments and rDNA segments were transformed into the fungus to examine the effect of the number of target copies on homologous recombination. Using the circular plasmids, Me1^– transformants accounted for only 5% of Hy^R transformants. In contrast, when the linear plasmid produced by restriction enzyme digestion within theBRM1 segment was used, almost all transformants were Me1^–. These results indicate that homologous integration of circular molecules inA. alternata is sensitive to the length of homology and the number of targets, and that double-strand breaks in transforming DNA greatly enhance homologous recombination.     

Identification of novel gene clusters for secondary metabolism in <Emphasis Type="Italic">Trichoderma</Emphasis> genomes

Trichoderma species are widely used in agriculture as biofungicides. These fungi are rich source of secondary metabolites and the mycoparasitic species are enriched in genes for biosynthesis of secondary metabolites. Most often, genes for secondary metabolism are clustered in fungal genomes. Previously, no systematic study was undertaken to identify the secondary-metabolism related gene clusters in Trichoderma genomes. In the present study, a survey of the three Trichoderma genomes viz. T. reesei, T. atroviride and T. virens, was made to identify the putative gene clusters associated with secondary metabolism. In T. reesei genome, we identified one new NRPS and 6 new PKS clusters, which is much less than that found in T. atroviride (4 and 8) and T. virens (8 and 7). This work would pave the way for discovery of novel secondary metabolites and pathways in Trichoderma.     

Protein Engineering of Chit42 Towards Improvement of Chitinase and Antifungal Activities

The antagonism of Trichoderma strains usually correlates with the secretion of fungal cell wall degrading enzymes such as chitinases. Chitinase Chit42 is believed to play an important role in the biocontrol activity of Trichoderma strains as a biocontrol agent against phytopathogenic fungi. Chit42 lacks a chitin-binding domain (ChBD) which is involved in its binding activity to insoluble chitin. In this study, a chimeric chitinase with improved enzyme activity was produced by fusing a ChBD from T. atroviride chitinase 18–10 to Chit42. The improved chitinase containing a ChBD displayed a 1.7-fold higher specific activity than chit42. This increase suggests that the ChBD provides a strong binding capacity to insoluble chitin. Moreover, Chit42-ChBD transformants showed higher antifungal activity towards seven phytopathogenic fungal species.     

Homologous overexpression of a lipase from <Emphasis Type="Italic">Burkholderia cepacia</Emphasis> using the lambda Red recombinase system

Red recombinase system of the λ phage is widely used for recombination of short linear DNA fragments and genome. Using this system, we obtained T7 RNA polymerase (RNAP) substitution mutants in Burkholderia cepacia. To test the expression abilities of the T7 mutants, four different lipase expression vectors were transformed and the lipase activity of these recombinants was evaluated. Our results suggest that 500 nt homology between the unit and the genome is sufficient to generate mutations and this strategy enables the rapid establishment of mutant strains with efficiencies of 85%. After expression and purification, the highest purified lipase activity obtained was 3,990 U/l, nearly triple that of the wild-type organism.     

Signal Transduction by Tga3, a Novel G Protein α Subunit of Trichoderma atroviride

Trichoderma species are used commercially as biocontrol agents against a number of phytopathogenic fungi due to their mycoparasitic characterisitics. The mycoparasitic response is induced when Trichoderma specifically recognizes the presence of the host fungus and transduces the host-derived signals to their respective regulatory targets. We made deletion mutants of the tga3 gene of Trichoderma atroviride, which encodes a novel G protein α subunit that belongs to subgroup III of fungal Gα proteins. Δtga3 mutants had changes in vegetative growth, conidiation, and conidial germination and reduced intracellular cyclic AMP levels. These mutants were avirulent in direct confrontation assays with Rhizoctonia solani or Botrytis cinerea, and mycoparasitism-related infection structures were not formed. When induced with colloidal chitin or N-acetylglucosamine in liquid culture, the mutants had reduced extracellular chitinase activity even though the chitinase-encoding genes ech42 and nag1 were transcribed at a significantly higher rate than they were in the wild type. Addition of exogenous cyclic AMP did not suppress the altered phenotype or restore mycoparasitic overgrowth, although it did restore the ability to produce the infection structures. Thus, T. atroviride Tga3 has a general role in vegetative growth and can alter mycoparasitism-related characteristics, such as infection structure formation and chitinase gene expression.     

Relationship of vector insert size to homologous integration during transformation of Neurospora crassa with the cloned am (GDH) gene

Summary We used lambda and plasmid vectors containing the am ⁺ gene in an insert of from 2.7 to 9.1 kb, to transform am point mutant and deletion strains. A total of 199 transformants were examined with the potential to yield am ^– transformants by homologous recombination. When we used vectors that had 9.1 kb of homology with the chromosomal DNA, 30% of the transformants obtained were the result of homologous recombination regardless of whether the vector was a lambda molecule, a circular plasmid, or a plasmid that had been linearized prior to transformation. When vectors with up to 5.1 kb of homology were used, very few transformants (1 of 89 tested) resulted from homologous recombination. Of a sample of 29 ectopic integration events obtained by transformation with the 9.1 kb fragment cloned in a vector, 18 included a major part (usually almost all) of both arms of lambda with the entire Neurospora 9.1 kb insert between them. Four included only long arm sequence together with an adjacent segment of the insert containing the am gene. The remaining seven were the result of multiple integrations. There was no evidence of circularization of the vector prior to integration. All transformants that had multiple copies of the am gene appeared to be subject to the RIP process, which causes multiple mutations in duplicated sequences during the sexual cycle.     

Homologous recombination and allele replacement in transformants of Fusarium fujikuroi

The ascomycete Fusarium fujikuroi could be transformed stably to hygromycin resistance only when the transforming plasmid contained a fragment of DNA from the fungus. The transformation frequencies were roughly independent of the sequence of the particular fungal DNA fragment used, of its size (1.8 or 6 kb), and of whether this DNA was present only once in the fungal genome or about forty times (the genes for ribosomal RNA). The plasmid was integrated into the fungal genome by homologous recombination in the eighteen transformants tested; ectopic integration was never observed. The carB gene of F. fujikuroi was cloned and shown to complement unpigmented mutants deficient in phytoene dehydrogenase. A mutant carB allele was prepared in vitro and used to transform wild-type protoplasts; the transformants contained a genomic duplication and were heterozygous for carB; the mutant allele replaced the original wild-type allele when this was spontaneously lost in the transformants. This loss was due to gene conversion in some cases and to recombination between repeated sequences in others. Received: 5 November 1999 / Accepted: 16 March 2000     

Ultra-Low Background DNA Cloning System

Yeast-based in vivo cloning is useful for cloning DNA fragments into plasmid vectors and is based on the ability of yeast to recombine the DNA fragments by homologous recombination. Although this method is efficient, it produces some by-products. We have developed an “ultra-low background DNA cloning system” on the basis of yeast-based in vivo cloning, by almost completely eliminating the generation of by-products and applying the method to commonly used Escherichia coli vectors, particularly those lacking yeast replication origins and carrying an ampicillin resistance gene (Amp^r). First, we constructed a conversion cassette containing the DNA sequences in the following order: an Amp^r 5′ UTR (untranslated region) and coding region, an autonomous replication sequence and a centromere sequence from yeast, a TRP1 yeast selectable marker, and an Amp^r 3′ UTR. This cassette allowed conversion of the Amp^r-containing vector into the yeast/E. coli shuttle vector through use of the Amp^r sequence by homologous recombination. Furthermore, simultaneous transformation of the desired DNA fragment into yeast allowed cloning of this DNA fragment into the same vector. We rescued the plasmid vectors from all yeast transformants, and by-products containing the E. coli replication origin disappeared. Next, the rescued vectors were transformed into E. coli and the by-products containing the yeast replication origin disappeared. Thus, our method used yeast- and E. coli-specific “origins of replication” to eliminate the generation of by-products. Finally, we successfully cloned the DNA fragment into the vector with almost 100% efficiency.     

Agrobacterium tumefaciens integrates transfer DNA into single chromosomal sites of dimorphic fungi and yields homokaryotic progeny from multinucleate yeast

The dimorphic fungi Blastomyces dermatitidis and Histoplasma capsulatum cause systemic mycoses in humans and other animals. Forward genetic approaches to generating and screening mutants for biologically important phenotypes have been underutilized for these pathogens. The plant-transforming bacterium Agrobacterium tumefaciens was tested to determine whether it could transform these fungi and if the fate of transforming DNA was suited for use as an insertional mutagen. Yeast cells from both fungi and germinating conidia from B. dermatitidis were transformed via A. tumefaciens by using hygromycin resistance for selection. Transformation frequencies up to 1 per 100 yeast cells were obtained at high effector-to-target ratios of 3,000:1. B. dermatitidis and H. capsulatum ura5 lines were complemented with transfer DNA vectors expressing URA5 at efficiencies 5 to 10 times greater than those obtained using hygromycin selection. Southern blot analyses indicated that in 80% of transformants the transferred DNA was integrated into chromosomal DNA at single, unique sites in the genome. Progeny of B. dermatitidis transformants unexpectedly showed that a single round of colony growth under hygromycin selection or visible selection of transformants by lacZ expression generated homokaryotic progeny from multinucleate yeast. Theoretical analysis of random organelle sorting suggests that the majority of B. dermatitidis cells would be homokaryons after the ca. 20 generations necessary for colony formation. Taken together, the results demonstrate that A. tumefaciens efficiently transfers DNA into B. dermatitidis and H. capsulatum and has the properties necessary for use as an insertional mutagen in these fungi.     

<Emphasis Type="Italic">Trichoderma</Emphasis> Modulates Stomatal Aperture and Leaf Transpiration Through an Abscisic Acid-Dependent Mechanism in <Emphasis Type="Italic">Arabidopsis</Emphasis>

Trichoderma species are widespread phytostimulant fungi that act through biocontrol of root pathogens, modulation of root architecture, and improving plant adaptation to biotic and abiotic stress. With the major challenge to better understand the contribution of Trichoderma symbionts to plant adaptation to climate changes and confer stress tolerance, we investigated the potential of Trichoderma virens and Trichoderma atroviride in modulating stomatal aperture and plant transpiration. Arabidopsis wild-type (WT) seedlings and ABA-insensitive mutants, abi1-1 and abi2-1, were co-cultivated with either T. virens or T. atroviride, and stomatal aperture and water loss were determined in leaves. Arabidopsis WT seedlings inoculated with these fungal species showed both decreased stomatal aperture and reduced water loss when compared with uninoculated seedlings. This effect was absent in abi1-1 and abi2-1 mutants. T. virens and T. atroviride induced the abscisic acid (ABA) inducible marker abi4:uidA and produced ABA under standard or saline growth conditions. These results show a novel facet of Trichoderma-produced metabolites in stomatic aperture and water-use efficiency of plants.     

Evaluation of the efficiency and utility of recombinant enzyme-free seamless DNA cloning methods

Simple and low-cost recombinant enzyme-free seamless DNA cloning methods have recently become available. In vivo Escherichia coli cloning (iVEC) can directly transform a mixture of insert and vector DNA fragments into E. coli, which are ligated by endogenous homologous recombination activity in the cells. Seamless ligation cloning extract (SLiCE) cloning uses the endogenous recombination activity of E. coli cellular extracts in vitro to ligate insert and vector DNA fragments. An evaluation of the efficiency and utility of these methods is important in deciding the adoption of a seamless cloning method as a useful tool. In this study, both seamless cloning methods incorporated inserting DNA fragments into linearized DNA vectors through short (15–39 bp) end homology regions. However, colony formation was 30–60-fold higher with SLiCE cloning in end homology regions between 15 and 29 bp than with the iVEC method using DH5α competent cells. E. coli AQ3625 strains, which harbor a sbcA gene mutation that activates the RecE homologous recombination pathway, can be used to efficiently ligate insert and vector DNA fragments with short-end homology regions in vivo. Using AQ3625 competent cells in the iVEC method improved the rate of colony formation, but the efficiency and accuracy of SLiCE cloning were still higher. In addition, the efficiency of seamless cloning methods depends on the intrinsic competency of E. coli cells. The competency of chemically competent AQ3625 cells was lower than that of competent DH5α cells, in all cases of chemically competent cell preparations using the three different methods. Moreover, SLiCE cloning permits the use of both homemade and commercially available competent cells because it can use general E. coli recA^? strains such as DH5α as host cells for transformation. Therefore, between the two methods, SLiCE cloning provides both higher efficiency and better utility than the iVEC method for seamless DNA plasmid engineering.     

Stable allele replacement and unstable non-homologous integration events during transformation of Ascobolus immersus

An homologous transformation system for the filamentous fungus Ascobolus immersus has been developed, based on the complementation of a met2 mutation by the wild-type (wt) allele gene encoding homoserine O-transacetylase. Transformation of A. immersus met2 mutants occurs with moderate frequencies (about 50 transformants per microgram input DNA). Analysis of the DNA of the met2+ transformants showed that transformation resulted either in a single integration of the donor DNA into the genome by many different nonhomologous recombination events or in the substitution of the endogenous met2 mutation by the wt transforming allele. The relative frequencies of both events depended on the vector sequences carrying the cloned met2 gene. Whereas the substitution event led, as expected, to genetically stable transformants, the non-homologous integration was always associated with a strong instability when transformants were crossed and underwent meiosis.