Effects of Cerium Oxide Nanoparticles on the Proliferation, Differentiation, and Mineralization Function of Primary Osteoblasts In Vitro

The effects of cerium oxide nanoparticles on the proliferation, differentiation, and mineralization function of primary osteoblasts in vitro were evaluated. The results showed that the cell biological effects of cerium oxide nanoparticles varied with different diameters. The cytotoxicity of cerium oxide nanoparticles on primary osteoblasts varies with the size and incubation time. Sixty-nanometer cerium oxide nanoparticles show significant cytotoxicity on primary osteoblasts at 48 h exposure. Cerium oxide nanoparticles with diameters of 40 nm promoted the differentiation of osteoblasts and the promotion rate was enhanced with increasing concentration. Cerium oxide nanoparticles with diameters of 60 nm promoted the differentiation of osteoblasts at lower concentrations, but turned to inhibit the differentiation at higher concentrations. Cerium oxide nanoparticles promoted the adipogenic transdifferentiation of osteoblasts at all tested concentrations. Moreover, the effects of 60-nm cerium oxide nanoparticles were stronger than that of 40-nm cerium oxide nanoparticles. Cerium oxide nanoparticles promoted the formation of mineralized matrix nodules of osteoblasts at all tested concentrations in a dose-dependent manner and the promotion rate increased with decreasing size. The results showed that cerium oxide nanoparticles had no acute cytotoxic effects on osteoblasts and could promote the osteogenic differentiation and mineralization of osteoblasts. Moreover, the size, concentration, and culture time of nanoparticles have significant influence on the proliferation, differentiation, and mineralization of osteoblasts.     

Mycoendophytes as efficient synthesizers of bionanoparticles: nanoantimicrobials,mechanism, and cytotoxicity

Mycoendophytes are the fungi that occur inside the plant tissues without exerting any negative impact on the host plant. They are most frequently isolated endophytes from the leaf, stem, and root tissues of various plants. Among all fungi, the mycoendophytes as biosynthesizer of noble metal nanoparticles (NPs) are less known. However, some reports showing efficient synthesis of metal nanoparticles, mainly silver nanoparticles and its remarkable antimicrobial activity against bacterial and fungal pathogens of humans and plants. The nanoparticles synthesized from mycoendophytes present stability, polydispersity, and biocompatibility. These are non-toxic to humans and environment, can be gained in an easy and cost-effective manner, have wide applicability and could be explored as promising candidates for a variety of biomedical, pharmaceutical, and agricultural applications. Mycogenic silver nanoparticles have also demonstrated cytotoxic activity against cancer cell lines and may prove to be a promising anticancer agent. The present review focuses on the biological synthesis of metal nanoparticles from mycoendophytes and their application in medicine. In addition, different mechanisms of biosynthesis and activity of nanoparticles on microbial cells, as well as toxicity of these mycogenic metal nanoparticles, have also been discussed.     

Bioactivity,mechanism of action,and cytotoxicity of copper-based nanoparticles: A review

Nanotechnology is an emerging branch of science, which has potential to solve many problems in different fields. The union of nanotechnology with other fields of sciences including physics, chemistry, and biology has brought the concept of synthesis of nanoparticles from their respective metals. Till date, many types of nanoparticles have been synthesized and being used in different fields for various applications. Moreover, copper nanoparticles attract biologists because of their significant and broad-spectrum bioactivity. Due to the large surface area to volume ratio, copper nanoparticles have been used as potential antimicrobial agent in many biomedical applications. But the excess use of any metal nanoparticles increase the chance of toxicity to humans, other living beings, and environment. In this article, we have critically reviewed the bioactivities and cytotoxicity of copper nanoparticles. We have also focused on possible mechanism involved in its interaction with microbes.     

Anticancer,antimicrobial, antioxidant,and catalytic activities of green-synthesized silver and gold nanoparticles using Bauhinia purpurea leaf extract

The synthesis of metal nanoparticles by green methods attained enormous attention in recent years due to its easiness, non-toxicity, and eco-friendly nature. In the present study, noble metal nanoparticles such as silver and gold were prepared using an aqueous leaf extract of a medicinal plant, Bauhinia purpurea. The leaf extract performed as both reducing and stabilizing agents for the development of nanoparticles. The formations of silver and gold nanoparticles were confirmed by observing the surface plasmon resonance peaks at 430 nm and 560 nm, respectively, in UV–Vis absorption spectrum. Various properties of nanoparticles were demonstrated using the characterization techniques such as FTIR, XRD, TEM, and EDX. The synthesized silver and gold nanoparticles had a momentous anticancer effect against lung carcinoma cell line A549 in a dose-dependent manner with IC₅₀ values of 27.97 µg/mL and 36.39 µg/mL, respectively. The antimicrobial studies of synthesized nanoparticles were carried out by agar well diffusion method against six microbial strains. Silver and gold nanoparticles were also showed high antioxidant potentials with IC₅₀ values of 42.37 µg/mL and 27.21 µg/mL, respectively; it was measured using DPPH assay. Additionally, the nanoparticles were observed to be good catalysts for the reduction of organic dyes.

     

Gold and silver nanoparticles: Green synthesis,microbes, mechanism,factors, plant disease management and environmental risks

Metal nanoparticles were being used in different processes of developmental sectors like agriculture, industry, medical and pharmaceuticals. Nano-biotechnology along with sustainable organic chemistry has immense potential to reproduce innovative and key components of the systems to support surrounding environment, human health, and industry sustainably. Different unconventional methods were being used in green chemistry to synthesize gold and silver nanoparticles from various microbes. So, we reviewed different biological processes for green synthesis of metal nanoparticles. We also studied the mechanism of the synthesis process and procedures to characterize them. Some metallic nanoparticles have shown their potential to act as antimicrobial agent against plant pathogens. Here, we outlined green nanoparticles synthesized from microbes and highlighted their role against plant disease management.     

Synthesis, Conforming, Linear, and Non-linear Optical Properties of Gold Nanoparticles-sepiolite Compacts

Gold monodispersed nanoparticles (smaller than 10 nm) have been embedded into sepiolite fibres and sintered by spark plasma sintering (SPS) in order to preserve their nanometre size. The optical properties of these nanoparticles have been measured showing the surface plasmon resonance. Plasmon absorption curves have been successfully fitted by using the quasistatic approximation for gold nanoparticles. It has been observed that the sintering process decreases the plasmon width. SPS sintered nanostructured compacts present large values of the non-linear third-order dielectric susceptibility related to the gold concentration.     

Stability,Intracellular Delivery,and Release of siRNA from Chitosan Nanoparticles Using Different Cross-Linkers

Chitosan (CS) nanoparticles have been extensively studied for siRNA delivery; however, their stability and efficacy are highly dependent on the types of cross-linker used. To address this issue, three common cross-linkers; tripolyphosphate (TPP), dextran sulphate (DS) and poly-D-glutamic acid (PGA) were used to prepare siRNA loaded CS-TPP/DS/PGA nanoparticles by ionic gelation method. The resulting nanoparticles were compared with regard to their physicochemical properties including particle size, zeta potential, morphology, binding and encapsulation efficiencies. Among all the formulations prepared with different cross linkers, CS-TPP-siRNA had the smallest particle size (ranged from 127 ± 9.7 to 455 ± 12.9 nm) with zeta potential ranged from +25.1 ± 1.5 to +39.4 ± 0.5 mV, and high entrapment (>95%) and binding efficiencies. Similarly, CS-TPP nanoparticles showed better siRNA protection during storage at 4˚C and as determined by serum protection assay. TEM micrographs revealed the assorted morphology of CS-TPP-siRNA nanoparticles in contrast to irregular morphology displayed by CS-DS-siRNA and CS-PGA-siRNA nanoparticles. All siRNA loaded CS-TPP/DS/PGA nanoparticles showed initial burst release followed by sustained release of siRNA. Moreover, all the formulations showed low and concentration-dependent cytotoxicity with human colorectal cancer cells (DLD-1), in vitro. The cellular uptake studies with CS-TPP-siRNA nanoparticles showed successful delivery of siRNA within cytoplasm of DLD-1 cells. The results demonstrate that ionically cross-linked CS-TPP nanoparticles are biocompatible non-viral gene delivery system and generate a solid ground for further optimization studies, for example with regard to steric stabilization and targeting.     

Etoposide-loaded nanoparticles made from glyceride lipids: Formulation,characterization, in vitro drug release,and stability evaluation

The aim of the study was to prepare etoposide-loaded nanoparticles with glyceride lipids and then characterize and evaluate the in vitro steric stability and drug release characteristics and stability. The nanoparticles were prepared by melt emulsification and homogenization followed by spray drying of nanodispersion. Spray drying created powder nanoparticles with excellent redispersibility and a minimal increase in particle size (20–40 nm). Experimental variables, such as homogenization pressure, number of homogenization cycles, and surfactant concentration, showed a profound influence on the particle size and distribution. Spray drying of Poloxamer 407-stabilized nanodispersion lead to the formation of matrix-like structures surrounding the nanoparticles, resulting in particle growth. The in vitro steric stability test revealed that the lipid nanoparticles stabilized by sodium tauroglycocholate exhibit excellent steric stability compared with Poloxamer 407. All 3 glyceride nanoparticle formulations exhibited sustained release characteristics, and the release pattern followed the Higuchi equation. The spray-dried lipid nanoparticles stored in black polypropylene containers exhibited excellent long-term stability at 25°C and room light conditions. Such stable lipid nanoparticles with in vitro steric stability can be a beneficial delivery system for intravenous administration as long circulating carriers for controlled and targeted drug delivery. Published: September 30, 2005     

Biogenic nanoparticles: copper, copper oxides, copper sulphides, complex copper nanostructures and their applications

Copper nanoparticles have been the focus of intensive study due to their potential applications in diverse fields including biomedicine, electronics, and optics. Copper-based nanostructured materials have been used in conductive films, lubrification, nanofluids, catalysis, and also as potent antimicrobial agent. The biogenic synthesis of metallic nanostructured nanoparticles is considered to be a green and eco-friendly technology since neither harmful chemicals nor high temperatures are involved in the process. The present review discusses the synthesis of copper nanostructured nanoparticles by bacteria, fungi, and plant extracts, showing that biogenic synthesis is an economically feasible, simple and non-polluting process. Applications for biogenic copper nanoparticles are also discussed.     

Fabrication of curcumin-loaded zein nanoparticles stabilized by sodium caseinate/sodium alginate: Curcumin solubility,thermal properties,rheology, and stability

Curcumin is a polyphenol with multiple biological activities, but its extremely poor water solubility severely limits its application in the food industry. The purposes of this work were to study the effect of nano-encapsulation on the water solubility of curcumin (C), the interaction of curcumin with zein (Z), the thermal properties, rheological properties, and the stability under different environmental pressures of the nanoparticles. The results of particle size, zeta potential, and surface hydrophobicity (H₀) indicated that the combination of coating materials including sodium caseinate (SC) and sodium alginate (SA) with zein nanoparticles by electrostatic interaction led to a gradual increase in the particle size of composite nanoparticles and a decrease in surface hydrophobicity. The nano-encapsulation significantly improved the water solubility of curcumin and causing its crystal structure to change to an amorphous state. Fourier transform infrared spectroscopy confirmed that curcumin bound to zein through hydrogen bonding. Rheological test results showed that the coating materials combined with zein led to an increase in the apparent viscosity of the nanoparticles. The stability analysis results indicated that the composite nanoparticles with a sodium alginate coating have excellent stability of pH, salt solution and storage, and excellent anti-gastrointestinal fluids digestion characteristics when compared to pure protein nanoparticles.     

Acceleration of antibacterial activity of curcumin loaded biopolymers against methicillin‐resistant Staphylococcus aureus: Synthesis,optimization, and evaluation

Curcumin is a polyphenolic molecule with antibacterial, antioxidant, anti‐inflammatory, and antimicrobial properties. This study aimed to prepare nanocurcumin by encapsulating in biopolymers to improve its stability, bioavailability, water‐solubility, antibacterial efficiency against methicillin‐resistant Staphylococcus aureus. Three effective variables of curcumin concentration, polymer concentration, and water volume on curcumin‐loaded polymer nanoparticles, were optimized. The average size of polyacrylic acid (PAA), polyvinyl alcohol (PVA), and polyethyleneimine (PEI) nanoparticles were obtained 75.2, 77.1, 86.4 nm, respectively. The nanoparticles had a spherical shape, a smooth and uniform surface morphology. The MIC of PAA, PVA, and PEI nanoparticles was 0.480, 0.390, and 0.340 mg/mL, respectively and the MIC of PAA, PVA, and PEI combined with methicillin was 0.330, 0.260, and 0.200 mg/mL, respectively. According to the results, curcumin‐loaded PEI nanoparticles had the highest inhibitory effect against methicillin‐resistant S. aureus among the synthesized nanoparticles. The results showed that solvent volume, polymer concentration and curcumin concentration had a significant effect on particle size. The inhibitory properties of curcumin nanoparticles significantly increased due to the smaller particle size and increased penetration into the bacterium. Curcumin‐loaded nanoparticles can be promising drug carriers for the treatment of infections, cancer, and other diseases.     

Microbial synthesis of semiconductor CdS nanoparticles,their characterization,and their use in the fabrication of an ideal diode

Cadmium sulfide nanoparticles were synthesized intracellularly by a Schizosaccharomyces pombe strain when challenged with 1 mM cadmium in solution. The nanoparticles, a known semiconducting material, exhibited an absorbance maximum at 305 nm. X-ray scattering data showed that the nanoparticles had a Wurtzite (Cd(16)S(20))-type hexagonal lattice structure and most of the nanoparicles were in the size range of 1-1.5 nm. The nanoparticles were used in the fabrication of a heterojunction with poly (p-phenylenevinylene). The diode exhibited approximately 75 mA/cm(2) current at 10 V when forward biased and the breakdown occurred at approximately 15 V in the reverse biased mode. These characteristics are considered ideal for a diode.     

Microbial Synthesis of Nanoparticles: Mechanisms,Characteristics, and Applications

Cadmium sulfide (CdS) and zinc sulfide (ZnS) biogenic nanoparticles (NPs) were produced by microbial synthesis using bacteria of different taxonomic groups: Gram-negative (Shewanella oneidensis MR-1) and Gram-positive (Bacillus subtilis 168) bacteria in a liquid medium under aerobic conditions in the presence of salts of the respective metals and sulfur. It was shown that the stabilization of nanoparticles in aqueous suspensions is due to the presence of certain protein molecules of the outer membrane of cells, that is, proteins of the families of various receptors, porins, and flagellin, on the nanoparticle (NP) surface. The effect of the protein coating on stability, luminescence, zeta-potential, hydrodynamics diameter and other physiochemical characteristics of nanoparticles was studied. Decolorization of methylene blue dye under the exposure to UV irradiation was used as a model to demonstrate the photocatalytic properties of NPsCdS. This opens the possibility of using biogenic nanoparticles in photocatalysis for industrial wastewater treatment.

     

Inactivation of S. epidermidis, B. subtilis, and E. coli bacteria bioaerosols deposited on a filter utilizing airborne silver nanoparticles

In the present study, a control methodology utilizing airborne silver nanoparticles is suggested and tested with respect to its potential to control Gram-positive Staphylococcus epidermidis and Bacillus subtilis, and Gram-negative Escherichia coli bacteria bioaerosols deposited on filters. As it is known that the Gram-negative bacteria are sensitive to airflow exposure, the main focus of this study for testing the airborne silver nanoparticles effect was the Gram-positive Staphylococcus epidermidis and Bacillus subtilis bacteria bioaerosols whereas Escherichia coli bioaerosols were utilized for comparison. Airborne bacteria and airborne silver nanoparticles were quantitatively generated in an experimental system. Bioaerosols deposited on the filter were exposed to airborne silver nanoparticles. The physical and biological properties of the airborne bacteria and airborne silver nanoparticles were measured via aerosol measurement devices. From the experimental results, it was demonstrated that this method utilizing airborne silver nanoparticles offers potential as a bioaerosol control methodology.     

Modulating pharmacokinetics, tumor uptake and biodistribution by engineered nanoparticles

BACKGROUND: Inorganic nanoparticles provide promising tools for biomedical applications including detection, diagnosis and therapy. While surface properties such as charge are expected to play an important role in their in vivo behavior, very little is known how the surface chemistry of nanoparticles influences their pharmacokinetics, tumor uptake, and biodistribution. METHOD/PRINCIPAL FINDINGS: Using a family of structurally homologous nanoparticles we have investigated how pharmacological properties including tumor uptake and biodistribution are influenced by surface charge using neutral (TEGOH), zwitterionic (Tzwit), negative (TCOOH) and positive (TTMA) nanoparticles. Nanoparticles were injected into mice (normal and athymic) either in the tail vein or into the peritoneum. CONCLUSION: Neutral and zwitterionic nanoparticles demonstrated longer circulation time via both i.p. and i.v. administration, whereas negatively and positively charged nanoparticles possessed relatively short half-lives. These pharmacological characteristics were reflected on the tumor uptake and biodistribution of the respective nanoparticles, with enhanced tumor uptake by neutral and zwitterionic nanoparticles via passive targeting.     

Computational design of Phe-Tyr dipeptide and preparation,characterization, cytotoxicity studies of Phe-Tyr dipeptide loaded PLGA nanoparticles for the treatment of hypertension

Phe-Tyr dipeptide which was investigated in Wakame food with greatest ACE-inhibitory activity is used as a pharmaceutical drug for the treatment of hypertension, cardiovascular diseases, and diabetic nephropathy. To improve the bioavailability of Phe-Tyr, a delivery system based on poly (lactic-co-glycolic acid) (PLGA) nanoparticles loaded with Phe-Tyr (Phe-Tyr-PLGA NPs) for treating hypertension and cardiovascular diseases was prepared in this study. In the experiments, poly(lactic-co-glycolic acid) (PLGA) and Phe-Tyr dipeptide-loaded PLGA nanoparticles were prepared using the double emulsion (w/o/w) method. The characterizations of the nanoparticles were performed with a UV–vis spectrometer, the Zeta-sizer system, and FTIR spectrometer. The optimum size of the Phe-Tyr dipeptide-loaded PLGA nanoparticle was obtained with a 213.8 nm average particle size, and a 0.061 polydispersity index, ?19.5 mV zeta potential, 34% of loaded and 90.09% of encapsulation efficiency. From TEM analysis, it was clearly seen that the dipeptide loaded nanoparticles had the spherical and non-aggregated morphology and Phe-Tyr dipeptide loaded-PLGA nanoparticles were obtained successfully. Cell toxicity of nanoparticles at different concentrations was assayed with XTT methods on L929 fibroblast cells. This study determined that the nanoparticles have low toxicity at lower concentration and toxicity augmented with increasing concentration of dipeptide. To analyze the effect of solvents on structure of Phe-Tyr, Molecular dynamics simulation was performed with GROMACS program and molecular orbital calculations were carried out to obtain structural and electronic properties of dipeptide. Moreover, molecular docking calculations were also employed to model and predict protein–drug interactions.     

Analysis of the Cytotoxicity of Carbon-Based Nanoparticles,Diamond and Graphite,in Human Glioblastoma and Hepatoma Cell Lines

Nanoparticles have attracted a great deal of attention as carriers for drug delivery to cancer cells. However, reports on their potential cytotoxicity raise questions of their safety and this matter needs attentive consideration. In this paper, for the first time, the cytotoxic effects of two carbon based nanoparticles, diamond and graphite, on glioblastoma and hepatoma cells were compared. First, we confirmed previous results that diamond nanoparticles are practically nontoxic. Second, graphite nanoparticles exhibited a negative impact on glioblastoma, but not on hepatoma cells. The studied carbon nanoparticles could be a potentially useful tool for therapeutics delivery to the brain tissue with minimal side effects on the hepatocytes. Furthermore, we showed the influence of the nanoparticles on the stable, fluorescently labeled tumor cell lines and concluded that the labeled cells are suitable for drug cytotoxicity tests.     

Mechanistic aspects in the biogenic synthesis of extracellular metal nanoparticles by peptides,bacteria, fungi,and plants

Metal nanoparticles have been studied and applied in many areas including the biomedical, agricultural, electronic fields, etc. Several products of colloidal silver are already on the market. Research on new, eco-friendly and cheaper methods has been initiated. Biological production of metal nanoparticles has been studied by many researchers due to the convenience of the method that produces small particles stabilized by protein. However, the mechanism involved in this production has not yet been elucidated although hypothetical mechanisms have been proposed in the literature. Thus, this review discusses the various mechanisms provided for the biological synthesis of metal nanoparticles by peptides, bacteria, fungi, and plants. One thing that is clear is that the mechanistic aspects in some of the biological systems need more detailed studies.     

Folate-conjugated iron oxide nanoparticles for solid tumor targeting as potential specific magnetic hyperthermia mediators: synthesis, physicochemical characterization, and in vitro experiments

New folate-conjugated superparamagnetic maghemite nanoparticles have been synthesized for the intracellular hyperthermia treatment of solid tumors. These ultradispersed nanosystems have been characterized for their physicochemical properties and tumor cell targeting ability, facilitated by surface modification with folic acid. Preliminary experiments of nanoparticles heating under the influence of an alternating magnetic field at 108 kHz have been also performed. The nanoparticle size, surface charge, and colloidal stability have been assessed in various conditions of ionic strength and pH. The ability of these folate "decorated" maghemite nanoparticles to recognize the folate receptor has been investigated both by surface plasmon resonance and in folate receptor expressing cell lines, using radiolabeled folic acid in competitive binding experiments. The specificity of nanoparticle cellular uptake has been further investigated by transmission electron microscopy after incubation of these nanoparticles in the presence of three cell lines with differing folate receptor expression levels. Qualitative and quantitative determinations of both folate nanoparticles and nontargeted control nanoparticles demonstrated a specific cell internalization of the folate superparamagnetic nanoparticles.