The properties of subtilisin,Novo type,immobilized on porous glass

Studies of the properties of subtilisin, Novo type, immobilized on porous glass with the aid of hexamethylene diisocyanate were carried out. The immobilized proteinase preparation shows optimum activity at a pH value of 10.7 and at a temperature between 60–65°C. It was stable in a wider range of pH and temperature values than the native subtilisin. The K_M values for hemoglobin and BAEE were 9.2 × 10^?5 [M] and 139 × 10^?5 [M], respectively. Under relatively non-aqueous conditions, immobilised subtilisin was able to synthesize phenylacetic acid ethyl ester.     

Thermodynamic integration calculations of binding free energy difference for Gly-169 mutation in subtilisin BPN′

The binding free energy difference for the Gly-169 → Ala-169 (G169A) mutation in subtilisin BPN′ complexed with a tripeptide substrate analogue is explored using the thermodynamic integration approach. The structure of the mutant enzyme–substrate complex obtained from free energy simulation is in good agreement with experimental X-ray refinement. The near perfect reversibility is obtained in the present work for ensuring the correctness of the free energy calculations. The results of the binding free energy difference are close to similar experimental data. © 1993 Wiley-Liss, Inc.     

Affinity chromatography of proteinases using bacitracin immobilized to porous glass beads

J. FONTECHA, T. REQUENA AND H.E. SWAISGOOD. 1996. This study describes an affinity chromatography procedure for proteinase purification using bioselective binding to immobilized bacitracin. By coupling bacitracin to controlled-pore glass (CPG) beads, an affinity matrix was obtained that permitted rapid purification of proteinases under conditions that minimize autolysis. Bacitracin-CPG was used to bioselectively adsorb the extracellular proteinase secreted by Enterococcus faecalis var. liquefaciens IFPL 383. The overall purification obtained with this procedure was 5149-fold. The ability of bacitracin-CPG to bind other proteinases was examined using various commercial proteinases. The specific activities of subtilin BPN' and proteinase K were increased by bioselective adsorption and excellent recoveries of all proteinases applied were obtained.     

Endopolygalacturonase immobilized on a porous poly(6-caprolactame)

Summary Endopolygalacturonase was immobilized by covalent coupling onto porous poly (6-caprolactame) activated by glutaraldehyde. Catalytic properties and action pattern of the immobilized enzyme are described.     

Properties of ribulose diphosphate carboxylase immobilized on porous glass

Ribulose-1,5-diphosphate carboxylase from spinach has been bound to arylamine porous glass with a diazo linkage and to alklamine porous glass with glutaraldehyde. Stability at elevated temperatures and responses to changes of pH and ribulose-1,5-diphosphate, Mg²⁺, and dithiothreitol concentrations were not significantly different from the soluble enzyme, though stability at 4°C was somewhat improved.     

Endopolygalacturonase immobilized on a porous poly(2,6-dimethyl-p-phenyleneoxide)

Summary Endopolygalacturonase was immobilized by coupling on to porous poly(2,6-dimethyl-p-phenyleneoxide) activated by adsorbed glutaraldehyde. Catalytic properties, stability and action pattern of the immobilized enzyme are described.     

Surface charge engineering of a Bacillus gibsonii subtilisin protease

In proteins, a posttranslational deamidation process converts asparagine (Asn) and glutamine (Gln) residues into negatively charged aspartic (Asp) and glutamic acid (Glu), respectively. This process changes the protein net charge affecting enzyme activity, pH optimum, and stability. Understanding the principles which affect these enzyme properties would be valuable for protein engineering in general. In this work, three criteria for selecting amino acid substitutions of the deamidation type in the Bacillus gibsonii alkaline protease (BgAP) are proposed and systematically studied in their influence on pH-dependent activity and thermal resistance. Out of 113 possible surface amino acids, 18 (11 Asn and 7 Gln) residues of BgAP were selected and evaluated based on three proposed criteria: (1) The Asn or Gln residues should not be conserved, (2) should be surface exposed, and (3) neighbored by glycine. “Deamidation” in five (N97, N253, Q37, Q200, and Q256) out of eight (N97, N154, N250, N253, Q37, Q107, Q200, and Q256) amino acids meeting all criteria resulted in increased proteolytic activity. In addition, pH activity profiles of the variants N253D and Q256E and the combined variant N253DQ256E were dramatically shifted towards higher activity at lower pH (range of 8.5–10). Variant N253DQ256E showed twice the specific activity of wild-type BgAP and its thermal resistance increased by 2.4 °C at pH?8.5. These property changes suggest that mimicking surface deamidation by substituting Gln by Glu and/or Asn by Asp might be a simple and fast protein reengineering approach for modulating enzyme properties such as activity, pH optimum, and thermal resistance.     

H production by immobilized cells of Clostridium butyricum on porous glass beads

Clostridium butyricum immobilized on porous glass beads in a column reactor evolved H 2 at 715 and 1,150 ml/l.h, with H 2 yields of 2.3 and 1.9 mol H 2 /mol glucose, at retention times of 2.0 and 1.0 h, respectively, with a medium containing 0.5 g glucose/l in continuous cultures without pH control.     

Pore diffusion model for a two-substrate enzymatic reaction: Application to galactose oxidase immobilized on porous glass particles

An analysis of the pore diffusion model involving a two-substrate enzymatic reaction is presented. The resulting equations have been applied to the case of galactose oxidase catalyzed oxidation of galactose when the enzyme is immobilized on porous glass particles. The physical constants of the system were obtained by theoretical predictions and the enzyme concentration in the porous medium was derived from the experimental results. The calculations were performed with the assumption that the kinetic parameters of the enzyme remain unchanged upon immobilization. The theoretically calculated effectiveness factors were compared with the experimental effectiveness factors determined from the batch kinetic experiments and were found to be in agreement. The results are presented as effectiveness factor plots graphed as functions of bulk galactose and oxygen concentrations. The model was extended in order to study the effect of external mass transfer coefficients and pore enzyme concentrations on the effectiveness factors.     

Biocatalytic properties of native and immobilized subtilisin 72 in aqueous-organic and low water media

Subtilisin 72 was immobilized on cryogel of poly(vinyl alcohol), the macroporous carrier prepared by the freeze-thaw-treatment of concentrated aqueous solution of the polymer. The obtained biocatalyst was active and stable in aqueous, aqueous-organic, as well as in low water media. The stability of immobilized biocatalyst was substantially higher than that of native enzyme in all mixtures especially in aqueous buffer containing 5–8 M Urea and in acetonitrile/60–90%DMF mixtures. The ability of native and immobilized subtilisin to catalyze peptide bond formation between Z-Ala-Ala-Leu-OMe and Phe-pNA was studied in non-aqueous media. Considerable enzyme stabilization in acetonitrile/90%DMF mixture, induced by the immobilization, resulted in higher product yield (57%) than in case of native subtilisin suspension (32%). Detailed study of synthesis reaction revealed that notable increase in product yield could be reached using increase in both substrate concentrations up to 200 mM.     

The properties of immobilized caldolysin, a thermostable protease from an extreme thermophile

Caldolysin, the extracellular thermostable metal-chelator-sensitive lytic protease from Thermus T-351 was immobilized to Sepharose 4B, CM-cellulose, and controlled pore glass (CPG). Although protein binding efficiencies were high (96, 88, and 95%), some loss of enzyme activity occurred on immobilization (26, 69, and 89%). The pH optimum of both CM-cellulose and CPG-immobilized Caldolysin was decreased by about one pH unit. The K(m) for Sepharose-Caldolysin was unchanged with respect to the free protease, while those for CM-cellulose-Caldolysin and CPG-Caldolysin were lower by approximately one order of magnitude. Immobilization to both Sepharose and CM-cellulose increased the thermostability of Caldolysin at high temperatures, while CPG-Caldolysin was less thermostable than the free protease.     

An investigation of the properties of glucoamylase immobilized on glass beads involving 5-diazosalicylic acid bonded to a titanium (IV) oxide film

Optimum conditions have been determined for the immobilization of glucoamylase on glass involving diazotized 5-aminosalicylic acid bonded to a deposited imperfectly crystallized film of TiO₂. The changes in the kinetic and thermodynamic characteristics of the enzyme on immobilization have been determined. There are significant differences in the behaviour of the immobilized enzyme towards its substrates, maltose and starch. The apparent K_m for starch increased on immobilization whereas that for maltose decreased. The pH optimum for the immobilized preparation showed a shift to acid pH relative to that of the free enzyme.     

Immobilization of the serine protease from Thermomonospora fusca YX on porous glass

As much as 84% of the thermostable serine protease from Thermomonospora fusca strain YX was covalently attached to silanized glass using glutaraldehyde. The immobilized protease exhibited a higher temperature optimum (86 degrees C) and pH optimum (9.4) for activity compared to soluble YX-protease (80 degrees C and pH 9.0, respectively). Immobilization improved enzyme thermo-stability above 90 degrees C and reduced inactivation during prolonged storage (9% loss of activity after 90 days at 12 degrees C). A continuous-flow column reactor packed with immobilized protease readily hydrolyzed casein over broad ranges of temperature and pH.     

Affinity chromatography of subtilisin on a sorbent with epsilon-aminocapronyl-alanyl-alanyl-D-leucylamide. Detection of a serine protease with unusual properties]

A biospecific sorbent obtained by attachment of epsilon-aminocapronyl-L-alanyl-L-alanyl-D-leucylamide to CNBr-activated Sepharose 4B has been used for affinity chromatography of various samples of subtilisin BPN', e.g. subtilisin A ("Serva"), Nagarse, A-50. Two active components were isolated from subtilisin A (Serva"), the major component corresponding to subtilisin BPN' and the minor component (SII) being a serine proteinase with low molecular weight (about 10000). The molecular weight and amino acid composition of SII as well as the kinetic parameters of its action on peptide substrates (p-nitroanilides of N-benzyloxycarbonyl-Gly-Gly-Leu, -Ala-Ala-Leu, -Gly-Gly-Phe, -Ala-Ala-Phe. The low molecular weight proteinase possesses a high affinity for the leucine residue in P1 position and alanine in P2 and P3 positions. The specificity of this proteinase differs from that of the main component.