Temperature-responsive size-exclusion chromatography using poly(N-isopropylacrylamide) grafted silica

Silica-based packing materials induce non-specific interactions with proteins in aqueous media because of the nature of their surface, mainly silanol groups. Therefore, the silica surface has to be modified in order to be used as stationary phase for the High Performance Size-Exclusion Chromatography (HPSEC) of proteins. For this purpose, porous silica beads were coated with hydrophilic polymer gels (dextrans of different molecular weights) carrying a calculated amount of diethylaminoethyl groups (DEAE). Actually, as shown by HPSEC, these dextran modified supports minimize non-specific adsorption for proteins and pullulans in aqueous solution. Then, in order to change the pore size in response to temperature, temperature responsive polymer of poly(N-isopropylacrylamide) (PIPAAm) was introduced into the surface of dextran-DEAE on porous silica beads. The structure of these supports before and after modification was alternately studied by Scanning Electronic Microscopy (SEM) and Scanning Force Microscopy (SFM). An adsorption of radiolabelled albumin was performed to complete our study. Silica modifications by dextran-DEAE and PIPAAm improve the neutrality of the support and minimize the non-specific interactions between the solid support and proteins in solution. At low temperature, the support having PIPAAm exhibits a high resolution domain in HPSEC and finally permits a better resolution of proteins and pullulans. At higher temperature, hydrophobic properties of PIPAAm produce interactions with some proteins and trigger off a slight delay of their elution time.     

Swelling induced detachment of chondrocytes using RGD-modified poly(N-isopropylacrylamide) hydrogel beads

Thermally sensitive poly(N-isopropylacrylamide, NIPAAm) hydrogel beads conjugated with a cell adhesive motif, GRGDY, were prepared and utilized as cell culture substrate for chondrocytes. They were produced to be uniform in size and distribution by using calcium alginate as a temporal mold. The RGD moieties were introduced, in a spatially selective manner, to the surface of the beads by conjugating GRGDY under the precollapsed state at a higher temperature above the lower critical solution temperature (LCST). These RGD-conjugated polyNIPAAm beads demonstrated a reversible swelling and deswelling behavior around the LCST, which enabled the chondrocytes attached on the surface of collapsed beads at 37 degrees C to readily detach when the temperature was shifted below 37 degrees C. The cell detachment percentage was largely affected by the temperature-dependent reswelling extent of the collapsed RGD-modified beads.     

Affinity precipitation of alpha-amylase inhibitor from wheat meal by metal chelate affinity binding using cu(II)-loaded copolymers of 1-vinylimidazole with N-isopropylacrylamide

A method for purifying alpha-amylase inhibitor from wheat meal based on immobilized metal affinity with a thermosensitive copolymer is developed. The studies represent the thermoprecipitation properties of the copolymers of N-isopropylacrylamide (NIPAM) with iminodiacetic acid (IDA) and 1-vinylimidazole (VI), respectively. The polymer which is obtained by the copolymerization of 1-vinylimidazole and N-isopropylacrylamide, charged with Cu(II), exhibited specific interaction of the metal ions to the protein inhibitor. The precipitation was induced by salt and the recovery of the amylase inhibitor was achieved by dissolving the inhibitor-polymer complex in imidazole buffer and subsequent precipitation of the polymer. A single family of the alpha-amylase inhibitor was recovered from the polymer with 89% yield and about fourfold purification. The SDS-PAGE pattern showed significant purification of the inhibitor. The binding of the inhibitor to the Cu(II)-polymer conjugate depends upon the Cu(II) concentration in the copolymer and also upon the concentration of the protein. The recovered polymer could be reused with reasonable efficiency. Copyright 1998 John Wiley & Sons, Inc.     

Hydroxylated poly(N-isopropylacrylamide) as functional thermoresponsive materials

In this study, we developed a poly(N-isopropylacrylamide)-based thermoresponsive polymeric material with a high content of hydroxyl groups. We newly designed the functional monomer, N-(2-hydroxyisopropyl)acrylamide (HIPAAm), considering maintaining the continuous and repeated structure of the isopropylamide group after copolymerization and the monomer reactivity ratios. The thermoresponsive polymer was derived by conventional radical copolymerization of HIPAAm with N-isopropylacrylamide (NIPAAm) in high yield. Estimation of monomer reactivity ratios, r(1) and r(2), supported the almost random sequence of the comonomers. The obtained copolymers showed a very sensitive phase transition and/or separation in response to temperature in aqueous media although they have many hydrophilic parts, and their thermoresponsive behavior was not affected by the pH. Furthermore, the cloud points of these copolymers closely depended on the HIPAAm content and could be easily controlled by adding salts. HIPAAm is expected to regulate the phase transition and/or separation temperature of the NIPAAm-based copolymers while maintaining their desirable sensitive thermoresponse. Differential scanning calorimetric analysis showed that dehydration of the polymer chains occurring in phase transition became incomplete with increasing HIPAAm content. Moreover, it was found that poly(NIPAAm-co-HIPAAm) having a high content of the HIPAAm unit showed liquid-liquid phase separation involving coacervation. The sizes of the coacervate droplets were relatively monodisperse and very minimal. Poly(NIPAAm-co-HIPAAm) is valuable for use in biomedical fields such as bioseparation.     

Synthesis of temperature-responsive heterobifunctional block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide)

Heterobifunctional block copolymers of poly(ethylene glycol) (PEG) and poly(N-isopropylacrylamide) (PNIPAM) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of NIPAM using a macromolecular trithiocarbonate PEG-based chain transfer agent. The polymerization showed all the expected features of living radical polymerization and allowed the synthesis of copolymers with different lengths of the PNIPAM block. The synthesized block copolymers contained a carboxylic acid group from L-lysine at the focal point and a trithiocarbonate group at the terminus of the PNIPAM block. The trithiocarbonate functionality was converted into a thiol group and used for conjugation of biotin to the end of the PNIPAM block. The copolymers exhibited temperature-dependent association behavior in aqueous solution with a phase transition of approximately 32 degrees C. The described heterobifunctional block copolymers show promise for surface modifications with the potential for stimulus-controlled surface presentation of ligands attached to the terminus of the PNIPAM block.     

Temperature-controlled properties of DNA complexes with poly(ethylenimine)-graft-poly(N-isopropylacrylamide)

End-functionalized poly(N-isopropylacrylamide) (PNIPA) was synthesized by living free radical polymerization and conventional free radical polymerization and was used to prepare graft copolymers with poly(ethylenimine) (PEI). The copolymers exhibited lower critical solution temperature (LCST) behavior between 30 and 32 degrees C and formed complexes with plasmid DNA. The LCST of the copolymers in the DNA complexes increased slightly to approximately 34-35 degrees C. Cytotoxicity of the copolymers was evaluated by measuring lactate dehydrogenase (LDH) release from cells. The copolymers exhibited temperature-dependent toxicity, with higher levels of LDH release observed at temperatures above the LCST. Cellular uptake and transfection activity of the DNA complexes with the PEI-g-PNIPA copolymers were lower than those of the control PEI/DNA complexes at temperature below the LCST but increased to the PEI/DNA levels at temperatures above the LCST.     

Sequence-specific oligonucleotide purification using peptide nucleic acid amphiphiles in hydrophobic interaction chromatography

We present a methodology to perform sequence-specific separations of oligonucleotides using peptide nucleic acids covalently linked to alkane chains, or "PNA amphiphiles (PNAAs)". The PNAA/DNA duplexes are discriminated from unbound DNA using hydrophobic interaction chromatography on a phenyl-substituted Sepharose column. Nearly quantitative recovery is achieved at concentrations of 50 microM after incubation of oligomers with a stoichiometric amount of PNAA for 1 min or so. The method exhibits high sequence specificity, selectivity, and resolution when applied to mixtures of various oligomers up to 60 base pairs in length.     

Highly branched poly(N-isopropylacrylamide) for use in protein purification

Poly(N-isopropylacrylamide)s with imidazole endgroups were used to separate a histidine-tagged protein fragment directly from a crude cell lysate. The polymers display a lower critical solution temperature that can be tuned to occur at a range of subambient temperatures. UV-visible spectra indicated differences in the binding in aqueous media of Cu(II) and Ni(II) to the imidazole endgroups. These changes in the UV-visible spectra were reflected in the solution/aggregation behavior of the polymers as studied by dynamic light scattering. The addition of Cu(II) disaggregated the polymers, and the polymer coil swelled. On the other hand, when Ni(II) was added the polymers remained aggregated in aqueous media. The polymers were used to purify residues 230-534 of the histidine-tagged breast cancer susceptibility protein his6-BRCA1. Cu(II) was found to be better suited to the formation of useful polymer-metal ion-protein complexes that display cloud points, since Ni(II)/polymer mixtures generated very little purified protein. The polymers were synthesized using a previously reported variation of the reversible addition-fragmentation chain termination (RAFT) methodology, using the chain transfer agent 3H-imidazole-4-carbodithioic acid 4-vinyl benzyl ester with N-isopropylacrylamide (NIPAM).     

聚N-异丙基丙烯酰胺细胞培养平台的研究进展

聚N-异丙基丙烯酰胺(poly(N-isopropylacrylamide),PNIPAAm),温敏性聚合物,可利用其温敏特性替代酶类物质或细胞刮刀用于贴壁细胞的收获,从而有效避免酶解和机械损伤,可为生物医药领域提供品质优良的种子细胞。重点阐述促进细胞有效粘附和快速脱附的温敏性PNIPAAm二维平面的研发情况,包括选取特殊基材、引入亲水基团、调节反应物比率、控制聚合物厚度/密度、提供适宜外力等方式,从而有效改善细胞对温敏性平面的适应性并降低染菌风险以及减少低温处理对细胞的影响。同时介绍PNIPAAm微载体、支架和凝胶等温敏性三维培养介质的研究进展,此方式不仅增加细胞生长面积,更可以模拟体内微环境,从而保持细胞原始生理特征,同时实现大规模扩增和非酶解收获细胞以及组织器官修复和重构的目标。最后简单说明PNIPAAm培养平台的应用,PNIPAAm的研发为再生医学的发展提供了崭新思路。     

Stimuli-responsive zwitterionic block copolypeptides: poly(N-isopropylacrylamide)-block-poly(lysine-co-glutamic acid)

Synthesis of novel zwitterionic block copolypeptides, poly(N-isopropylacrylamide)-block-poly(L-glutamic acid-co-L-lysine) [PNiPAM(n)(PLG(x)-co-PLLys(y))m , where n is the number-average degree of polymerization (DP(n)) of PNiPAM block, x and y are the mole fraction of glutamic acid and lysine residues, respectively, and m is the total DP(n) of the peptide block], and their stimuli-responsiveness to temperature and pH variation in aqueous solutions are described. Initiated with the amino-terminated poly(N-isopropylacrylamide) (PNiPAM(n)-NH2), ring-opening polymerization (ROP) of a mixture of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG-NCA), and Boc-L-lysine N-carboxyanhydride (BLLys-NCA) afforded the block copolypeptides PNiPAM(n)(PBLG(x)-co-PBLLys(y))m, with a poly(N-isopropylacrylamide) block together with a random copolypeptide block, which was then deprotected with HBr/trifluoroacetic acid into the double hydrophilic block copolypeptides, PNiPAM(n)(PLG(x)-co-PLLys(y))m. Their block ratios and lengths, as well as the amino acid residue ratios in the random copolypeptide block are varied (n = 360, x = 0.4-0.5, y = 0.4-0.6, and m = 220-252). The secondary structures of the copolypeptides in aqueous solution at different pH conditions were examined. Phase transitions in aqueous solutions induced by both pH and temperature variation were investigated by (1)H NMR spectroscopy. The transitions induced by temperature were also explored by turbidity measurements using UV/vis spectroscopy for their lower critical aggregation temperature (LCAT) determination. Furthermore, these aggregation processes were followed by dynamic light scattering measurements.     

Intramolecular complex formation of poly(N-isopropylacrylamide) with human serum albumin

Complexation of human serum albumin (HSA) with poly(N-isopropylacrylamide) (PNIPA) ranging in molecular weight (M(PNIPA)) from 2.1 x 10(4) to 1.72 x 10(6) was studied in an aqueous system (pH 3) containing NaCl as a supporting salt. Dynamic light scattering, static light scattering, electrophoretic light scattering, and dialyzing techniques were used as the experimental tool in a suitable combination. The measurements were performed mainly at 25 degrees C and at 0.01 M NaCl as a function of mixing ratio (r(m), molar ratio of PNIPA to HSA). The results of DLS and ELS evidently demonstrated the formation of a water-soluble complex through mixing of HSA and PNIPA. A detailed analysis of SLS data with the aid of dialysis data revealed that the resulting complex is an "intramolecular" complex consisting of a PNIPA chain with several of bound HSA molecules. Both hydrodynamic radius (R(h)) and radius gyration (R(g)) of intramolecular complexes decreased as r(m) was increased. This result correlated well to the fact that the number (n) of bound proteins per polymer decreases with increasing r(m). The size and the molar mass of the complex became large depending on M(PNIPA), but the increase of M(PNIPA) led to a decrease in n at r(m) < 1. The increase in NaCl concentration from 0.01 to 0.3 M brought about the increase in the size and the molar mass of an intramolecular HSA-PNIPA complex prepared at r(m) = 1.1. This was found to be due to an increase of n. A similar trend was observed when temperature rose from 25 to 32 degrees C (close to lower critical solution temperature of PNIPA). However, the effect of temperature on the increase of was strong in comparison with that of ionic strength. On the basis of these results obtained, the complexation mechanism was discussed in detail.     

Physicochemical characterization of thermoresponsive poly(N-isopropylacrylamide)-poly(ethylene imine) graft copolymers

Synthetic polycations have shown promise as gene delivery vehicles but suffer from an unacceptable toxicity and low transfection efficiency. Novel architectures are being explored to increase transfection efficiency, including copolymers with a thermoresponsive character. The physicochemical characterization of a family of copolymers comprising a core of the cationic polymer poly(ethylene imine) (PEI) with differing thermoresponsive poly( N-isopropylacrylamide) (PNIPAM) grafts has been carried out using pulsed-gradient spin-echo NMR (PGSE-NMR) and small-angle neutron scattering (SANS). For the copolymers that have longer chain PNIPAM grafts, there is clear evidence of the collapse of the grafts with increasing temperature and the associated emergence of an attractive interpolymer interaction. These facets depend on the number of PNIPAM grafts attached to the PEI core. While a collapse in the smaller PNIPAM grafts is observed for the third polymer, there is no appearance of the interpolymer attractive interaction. These observations provide further insight into the association behavior of these copolymers, which is fundamental to developing a full understanding of how they interact with nucleic acids. Furthermore, the differing behaviors of the three copolymers over temperatures in which the PNIPAM blocks undergo coil-to-globule transitions is indicative of changes in the presentation of charged-core and hydrophobic chain components, which are key factors affecting nucleic acid binding and, ultimately, cell transfection ability.     

Preparation and tumor cell uptake of poly(N-isopropylacrylamide) folate conjugates

Folate conjugates (PNIPAM-NH-FA) of a copolymer of N-isopropylacrylamide (NIPAM) and amino-N'-ethylenedioxy-bis(ethylacrylamide) were prepared by an efficient synthesis leading to random grafting, via a short dioxyethylene spacer, of approximately 7 folic acid residues per macromolecule. The chemical composition of the copolymer was characterized by (1)H NMR and UV/vis spectroscopy. A fluorophore-labeled folate PNIPAM conjugate was tested by in vitro assays performed with cultured KB-31 cells overexpressing the folate receptor. The cellular uptake of the copolymer was found to be temperature dependent and was competitively decreased by free folic acid, indicating that the polymer uptake is mediated specifically by the folate receptor. Hydrophobically modified folate conjugates of NIPAM, amino-N'-ethylenedioxy-bis(ethylacrylamide) copolymers, bearing a small number of n-octadecyl groups were prepared following a modified synthetic procedure for use in future studies of FA-targeted liposomes.     

Sequence-specific artificial ribonucleases. I. Bis-imidazole-containing oligonucleotide conjugates prepared using precursor-based strategy

Antisense oligonucleotide conjugates, bearing constructs with two imidazole residues, were synthesized using a precursor-based technique employing post-synthetic histamine functionalization of oligonucleotides bearing methoxyoxalamido precursors at the 5′-termini. The conjugates were assessed in terms of their cleavage activities using both biochemical assays and conformational analysis by molecular modelling. The oligonucleotide part of the conjugates was complementary to the T-arm of yeast tRNA^Phe (44–60 nt) and was expected to deliver imidazole groups near the fragile sequence C₆₁-ACA-G₆₅ of the tRNA. The conjugates showed ribonuclease activity at neutral pH and physiological temperature resulting in complete cleavage of the target RNA, mainly at the C₆₃–A₆₄ phosphodiester bond. For some constructs, cleavage was completed within 1–2 h under optimal conditions. Molecular modelling was used to determine the preferred orientation(s) of the cleaving group(s) in the complexes of the conjugates with RNA target. Cleaving constructs bearing two imidazole residues were found to be conformationally highly flexible, adopting no preferred specific conformation. No interactions other than complementary base pairing between the conjugates and the target were found to be the factors stabilizing the ‘active’ cleaving conformation(s).     

Engineering temperature-sensitive poly(N-isopropylacrylamide) polymers as carriers of therapeutic proteins

This study was carried out to engineer N-isopropylacrylamide (NiPAM) polymers that contain protein-reactive N-acryloxysuccinimide (NASI) and hydrophobic alkylmethacrylates (AMAs). These thermoreversible, protein-conjugating polymers hold potential for retention of therapeutic proteins at an application site where tissue regeneration is desired. The lower critical solution temperatures (LCST) of the polymers were effectively controlled by the AMA mole content. The AMAs with longer side-chains were more effective in lowering the LCST. Polymers without NASI exhibited a stable LCST in phosphate buffer and in serum over a 10-day study period. The LCST of polymers containing NASI was found to increase over time in phosphate buffer, but not in serum-containing medium. The LCST increase in phosphate buffer was proportional to the AMA content. The feasibility of localizing a therapeutic protein, recombinant human bone morphogenetic protein-2 (rhBMP-2), to a site of application was explored in a rat intramuscular injection model. The results indicated that polymers capable of conjugating to rhBMP-2 were most effective in localizing the protein irrespective of the LCST (13-25 degrees C). For polymers with no NASI groups, a lower LCST resulted in a better rhBMP-2 localization. We conclude that thermosensitive polymers can be engineered for delivery of therapeutic proteins to improve their therapeutic efficacy.     

Sequence-specific targeting of RNA with an oligonucleotide-neomycin conjugate

The synthesis of neomycin covalently attached at the C5-position of 2'-deoxyuridine is reported. The synthesis outlined allows for incorporation of an aminoglycoside (neomycin) at any given site in an oligonucleotide (ODN) where a thymidine (or uridine) is present. Incorporation of this modified base into an oligonucleotide, which is complementary to a seven-bases-long alpha-sarcin loop RNA sequence, leads to enhanced duplex hybridization. The increase in Tm for this duplex (DeltaTm = 6 degrees C) suggests a favorable interaction of neomycin within the duplex groove. CD spectroscopy shows that the modified duplex adopts an A-type confirmation. ITC measurements indicate the additive effects of ODN and neomycin binding to the RNA target (Ka = 4.5 x 107 M-1). The enhanced stability of the hybrid duplex from this neomycin-ODN conjugate originates primarily from the enthalpic contribution of neomycin {DeltaDeltaHobs = -7.21 kcal/mol (DeltaHneomycin conjugated - DeltaH nonconjugated)} binding to the hybrid duplex. The short linker length allows for selective stabilization of the hybrid duplex over the hybrid triplex. The results described here open up new avenues in the design and synthesis of nucleo-aminoglycoside-conjugates (N-Ag-C) where the inclusion of any number of aminoglycoside (neomycin) molecules per oligonucleotide can be accomplished.     

Rapid deswelling response of poly(N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) hydrogels

Ternary poly( N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) (PNIPAAm/PROZO/PHEMA) hydrogels were prepared by the free-radical copolymerization of N-isopropylacrylamide (NIPAAm), 2-hydroxyethyl methacrylate (HEMA), and poly(2-alkyl-2-oxazoline) (PROZO) multifunctional macromonomers. The resulting polymeric materials were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), as well as by equilibrium swelling experiments. All synthesized hydrogels display temperature sensitivity in the 28-38 degrees C range. A high rate of response was registered as compared to that of materials based only on PNIPAAm. The swelling-deswelling peculiar behavior was related to the chemical composition (hydrophile/hydrophobe balance), the length of the inserted PROZO sequence, and inner morphology, an aspect which points on its possible control by synthesis. It was evidenced that the architecture of the resulting porous materials has a high order degree, emerging from the self-assembling of the microgel particles, which provided numerous, nearly uniform, large water release channels.