维吾尔药茶昆仑雪菊ISSR分子标记体系的建立

研究适用于昆仑雪菊的ISSR-PCR反应体系,建立ISSR分子标记技术评价昆仑雪菊生态多样性体系。采用改良CTAB法、CTAB区室法、改良CTAB区室法、试剂盒法提取昆仑雪菊的新鲜叶片、干花以及种子的DNA;以827为引物,研究浓度、循环数、退火温度对ISSR-PCR反应体系的影响,以不同实验材料检测其适宜性。结果表明,昆仑雪菊新鲜叶片、干花以及种子的DNA的最佳提取方法为改良CTAB区室法,ISSR-PCR反应体系的最适引物浓度为1.0μmol·L-1,退火温度为54.6℃,循环数为30。ISSR-PCR反应体系适用于评价昆仑雪菊的生物多样性。     

Purification and characterization of a bacterial nitrophenol oxygenase which converts ortho-nitrophenol to catechol and nitrite.

A nitrophenol oxygenase which stoichiometrically converted ortho-nitrophenol (ONP) to catechol and nitrite was isolated from Pseudomonas putida B2 and purified. The substrate specificity of the enzyme was broad and included several halogen- and alkyl-substituted ONPs. The oxygenase consisted of a single polypeptide chain with a molecular weight of 58,000 (determined by gel filtration) or 65,000 (determined on a sodium dodecyl sulfate-polyacrylamide gel). The enzymatic reaction was NADPH dependent, and one molecule of oxygen was consumed per molecule of ONP converted. Enzymatic activity was stimulated by magnesium or manganese ions, whereas the addition of flavin adenine dinucleotide, flavin mononucleotide, or reducing agents had no effect. The apparent Kms for ONP and NADPH were 8 and 140 microM, respectively. 2,4-Dinitrophenol competitively (Ki = 0.5 microM) inhibited ONP turnover. The optimal pH for enzyme stability and activity was in the range of 7.5 to 8.0. At 40 degrees C, the enzyme was totally inactivated within 2 min; however, in the presence of 1 mM ONP, 40% of the activity was recovered, even after 10 min. Enzymatic activity was best preserved at -20 degrees C in the presence of 50% glycerol.     

Cellulase complex from Chaetomium cellulolyticum: isolation and properties of major components.

Four major components of the cellulase complex of Chaetomium cellulolyticum have been isolated by gel-filtration, ion-exchange chromatography on DEAE-Toyopearl and Macro Prep Q, and chromatofocusing on Mono P. These components include three endoglucanases (19, 35, and 40 kD) and a cellobiohydrolase (45 kD). The isoelectric points of the enzymes vary from 3.8 to 4.2. The optimal pH values for catalytic activity are in the range 4.5-6.0, and the optimal temperatures are in the range 60-70 degrees C. Of these enzymes the 19 kD endoglucanase is the most stable; it retained high activity within a broad pH range (from 5.0 to 9.6) at 50 degrees C for 3 h. This enzyme also had the highest topolytic activity determined by the efficiency of removal of indigo from the surface of cotton.     

正交法整体优化差异显示反应体系

mRNA 差异显示PCR( mRNA differential display PCR,DDRT-PCR)是分离差异表达基因的有效方法,但该方法的准确性极易受到外部因素和内部因素的影响。本研究采用正交法优化DDRT-PCR反应条件,充分考虑到模板浓度、锚定引物浓度、随机引物浓度、dNTPs浓度、镁离子浓度以及Taq酶用量等因素在差异显示反应过程中的交互作用,一次PCR反应即可确定最佳反应组合。将筛选出的条件用于DDRT-PCR,得到差显结果假阳性率低,重复性和稳定性好,而且简化了反应条件的优选程序,这表明正交法是优化差异显示反应条件的理想方法。为了进一步简化整个差异显示反应系统的操作程序,降低假阳性率,研究采用了非变性聚丙烯酰胺凝胶电泳(polyacrylamide gel electrophoresis,PAGE)和银染显示差异带的方法,并用反向Northern法来验证回收条带,从而更加优化了差异显示反应体系。     

Design of a primer for ribosomal DNA internal transcribed spacer with enhanced specificity for ascomycetes.

A primer able to amplify the internal transcribed spacers (ITS) of the ribosomal DNA (rDNA), having enhanced specificity for ascomycetes, was identified by reviewing fungal ribosomal DNA sequences deposited in GenBank. The specificity of the primer, named ITS4A, was tested with DNA extracted from several species of ascomycetes, basidiomycetes, zygomycetes, mastigomycetes and mitosporic fungi (formerly deuteromycetes) and also from plants. The PCR annealing temperature most specific for ascomycetes was found to be 62 degrees C and 64 degrees C for the primer pairs ITS5 + ITS4A and ITS1F + ITS4A, respectively. At these annealing temperatures, all ascomycetous DNA samples were amplified efficiently with the ITS4A primer. The sensitivity limit was in the range 10(-14) g of DNA. This primer could also provide useful tools in suggesting the affinities of many mitosporic fungi with their perfect states.     

怀地黄ISSR扩增条件优化的研究

用CTAB法提取怀地黄嫩叶DNA,进行简单重复间序列标记(ISSR)分析.通过单因子实验分别研究了退火温度、Taq酶单位、Mg2+浓度、dNTP浓度、引物浓度和模板DNA浓度对ISSR-PCR反应的影响,找出各自的合适条件,而且每一个合适条件确定以后都被作为后续研究的一个条件.通过各个因子的组合研究建立了适宜于怀地黄ISSR分析的扩增体系25 μL PCR反应体积,1×Taq DNA酶缓冲液(10 mmol/L Tris-HCl,50 mmol/L KCl,0.1% Trion X-100,pH9.0 ),2.5 mmol/L MgCl2,1.5～1.0 U Taq酶,60 ng模板DNA,0.4 μmmol/L引物,各0.4 mmol/L的dATP、dGTP、dCTP和dTTP.合适的退火温度为53～55℃.为用ISSR技术分析鉴定怀地黄种质资源奠定了良好的基础.     

Global analysis of gene expression by differential display

Differential display (DD) is one of the most commonly used approaches for identifying differentially expressed genes. However, there has been lack of an accurate guidance on how many DD polymerase chain reaction (PCR) primer combinations are needed to display most of the genes expressed in a eukaryotic cell. This study critically evaluated the gene coverage by DD as a function of the number of arbitrary primers, the number of 3′ bases of an arbitrary primer required to completely match an mRNA target sequence, the additional 5′ base match(s) of arbitrary primers in first-strand cDNA recognition, and the length of mRNA tails being analyzed. The resulting new DD mathematical model predicts that 80 to 160 arbitrary 13mers, when used in combinations with 3 one-base anchored oligo-dT primers, would allow any given mRNA within a eukaryotic cell to be detected with a 74% to 93% probability, respectively. The prediction was supported by both computer simulation of the DD process and experimental data from a comprehensive fluorescent DD screening for target genes of tumor-suppressor p53. Thus, this work provides a theoretical foundation upon which global analysis of gene expression by DD can be pursued.     

In vitro amplification of DNA fragments greater than 10 kb.

The synthesis of a 10.9-kb DNA fragment from a bacteriophage lambda template was used in the search for conditions to extend the range for the polymerase chain reaction (PCR). Using the same primer sequences and conditions (denaturation at 94 degrees C, 1 min; annealing at 57 degrees C, 1 min; polymerization at 70 degrees C, 20 to 30 min) as published by W. Rychlik, W. J. Spencer, and R. E. Rhoads [(1990) Nucleic Acids Res. 18, 6409-6412], unsatisfactory results were obtained with AmpliTaq and native Taq polymerase (poor reproducibility, low product yield, nonspecific products), whereas Tub polymerase completely failed to amplify this fragment. Only after changes in the following parameters were reliable results obtained but only with Tub polymerase: A two-step PCR procedure with primer annealing and extension at 65 degrees C followed by DNA denaturation at 94 degrees C for 1.5 min was performed. The DNA fragment desired was specifically amplified when the enzyme concentration was reduced to 0.4 U/50 microliters and extension times as low as 4 to 12 min with an optimum at 8 min were used. A prolongation to 20 min or more resulted in an accumulation of unspecific products with a concomitant reduction in the yield of the fragment. Under the conditions described above it was also possible to amplify a DNA fragment even significantly longer (15.6 kb).     

Ionic, structural, and temperature effects on DNA nanoparticles formed by natural and synthetic polyamines

We synthesized analogues of spermine and studied the effects of chemical structure, ionic strength, and temperature on lambda-DNA nanoparticle formation. Effective concentration of polyamines for DNA condensation (EC50) was lowest for hexamines (0.2 microM) and highest for spermine (tetramine, 4.2 microM). The EC50 value increased with [Na+]. Dynamic light scattering showed nanoparticles with hydrodynamic radii (R(h)) of 40-50 nm. Effect of temperature on R(h) was measured between 20 and 70 degrees C. For spermine, R(h) remained relatively stable until 50 degrees C and increased significantly at >60 degrees C. In contrast, the hexa- and penta-valent analogues exhibited a gradual increase in R(h) between 20 and 70 degrees C. The nanoparticles were mainly toroidal, as revealed by electron microscopy (EM). EM studies showed changes in morphology and size of condensed structures with an increase in temperature. A possible mechanism for the differential effects of temperature on DNA nanoparticles might involve different modes of DNA-polyamine interactions.     

Target region amplification polymorphism: A novel marker technique for plant genotyping

The advent of large-scale DNA sequencing technology has generated a tremendous amount of sequence information for many important organisms. We have developed a rapid and efficient PCR-based technique, which uses bioinformatics tools and expressed sequence tag (EST) database information to generate polymorphic markers around targeted candidate gene sequences. This target region amplification polymorphism (TRAP) technique uses 2 primers of 18 nucleotides to generate markers. One of the primers, the fixed primer, is designed from the targeted EST sequence in the database; the second primer, the arbitrary primer, is an arbitrary sequence with either an AT-or GC-rich core to anneal with an intron or exon, respectively. PCR amplification is run for the first 5 cycles with an annealing temperature of 35°C, followed by 35 cycles with an annealing temperature of 50°C. For different plant species, each PCR reaction can generate as many as 50 scorable fragments with sizes ranging from 50–900 bp when separated on a 6.5% polyacrylamide sequencing gel. The TRAP technique should be useful in genotyping germplasm collections and in tagging genes governing desirable agronomic traits of crop plants.     

Rapid differentiation of Staphylococcus aureus from staphylococcal species by arbitrarily primed-polymerase chain reaction

An arbitrarily primed-polymerase chain reaction (AP-PCR) method was optimized to differentiate Staphylococcus aureus from other staphylococcal species, using DNA from crude cell extract. From the different assays carried out, the best resolution of the band patterns was obtained when the reaction mixture contained 200 micromol l(-1) dNTPs, 200 ng primer, 1 U Taq DNA polymerase and 3 mmol l(-1) MgCl2 and the amplification conditions were: initial denaturation of 94 degrees C for 1 min, primer annealing of 30 degrees C for 1.5 min, DNA extension at 55 degrees C for 5 min and final extension at 55 degrees C for 5 min. The results of the characterization of the staphylococcal isolates by AP-PCR are in accordance with those of the biochemical identification by the API Staph System, time of analysis of the AP-PCR being only 6-7 h. Thus, this technique could be a useful method for microbial quality assurance.     

多重PCR快速确证外源基因在转基因小麦后代的传递

根据转入小麦0世代中的高分子谷蛋白亚基1Dx5基因和报告基因uidA、作为选择标记的除草剂抗性基因bar的序列,设计合成三对引物。以整合uidA+bar的质粒pAHC25和整合1Dx5的质粒p1Dx5为模板寻找uidA与1Dx5及或bar多重扩增的最佳模板浓度及最适退火温度。MPCR模板量是单对引物扩增时的两倍,引物浓度同常规PCR为0.3μM,uidA与bar的适宜退火温度范围为57.1 - 62.3℃;uidA与1Dx5为60.0℃-60.6℃;uidA、bar、1Dx5的最适合退火温度范围为57.0℃-58.4℃。MPCR对大小相差50bp及以下的多重扩增片段可通过10%的非变性聚丙烯酰胺凝胶电泳分离。在此基础上对14株T1代转基因小麦基因组DNA进行多重PCR扩增,筛选出基因未分离的小麦后代,并与常规PCR比较,结果一致,其中11株同时传递1Dx5和bar基因、1株同时传递uidA、bar和1Dx5基因,3株未检测到外源基因。表明MPCR在快速确证外源基因在转基因植株后代的传递中作用显著。研究在常规PCR反应体系上,对模板浓度和多重引物退火温度进行微调,且把MPCR技术与PAGE技术结合起来,提高了研究结果的准确性,获得了较好的扩增和检测效果,简化了MPCR优化程序,使MPCR的优势更明显,为该技术的广泛应用提供了借鉴。     

丹参ISSR-PCR反应体系的建立与正交优化

利用正交试验设计的方法,从引物浓度、Taq DNA聚合酶浓度、Mg2+浓度、dNTP浓度4种因素3个水平,对丹参ISSR-PCR反应体系进行优化分析,并在此基础上对模板DNA浓度、PCR反应过程中的退火温度进行梯度检测。结果表明:20μL ISSR-PCR反应体系中各因素的最佳浓度为1×PCR buffer、200μmol/L dNTP、1.0μmol/L引物、1.5mmol/L Mg2+和1 U Taq DNA聚合酶,最佳模板DNA浓度为20～60ng,引物UBC 835的最佳退火温度为51.7℃。     

杂交油菜ISSR-PCR反应体系的建立和优化

利用正交试验设计的方法,对影响ISSR-PCR反应的Mg²⁺、dNTP、引物和Taq DNA聚合酶4个因素进行优化试验,以期建立其最佳反应条件。并在此基础上,对DNA模板浓度和ISSR PCR反应程序中的退火温度进行梯度筛选。结果表明：杂交油菜20 μL ISSR-PCR最佳反应体系包括1.50 mmol·L^-1 Mg²⁺、0.125 mmol·L^-1 dNTP、2.00 μmol·L^-1 primer、0.50 U Taq DNA聚合酶、2.5 μL 10×buffer和40 ng DNA模板;引物UBC891适宜的退火温度为54.2℃。该体系在青杂3号及其父本不同个体中能够扩增出条带清晰、稳定性好的条带。ISSR-PCR反应体系的建立为利用分子标记技术研究杂交油菜品种纯度和真实性鉴定奠定了良好基础。     

Optimal temperatures for inner-ear performance in gekkonoid lizards.

Temperature effects on the cochlear alternating potentials are described in lizards of the Eublepharidae (4 spp. and subspp.), Diplodactylinae (2 spp.), Gekkoninae (7 spp. and subspp.) and Sphaerodactylidae (1 sp.). Pure tones (50-15,000 Hz) were applied to the anaesthetized gecko's external ear. Sound intensity needed for a standard response was plotted (db versus frequency). A total of 249 such sensitivity functions were obtained from 50 animals, at temperatures of 15-40 degrees C. For each species, an optimal sensitivity function is definable by its extreme sensitivity and relative smoothness. This is obtained throughout a specific optimal temperature range. At lower temperatures, the function is less sensitive and its best sensitivity is at a lower frequency. The specific optimal cochlear temperature range resembles the specific ecological temperature preferendum where known. Both are broader in gekkonoid than in iguanid lizards. The temperature effects on the sensitivity function occur even with aerial or mechanical stimulation at the oval window after middle ear extirpation. Hence they arise in the inner ear. Their magnitude (db/ degrees C) is half that known from auditory nerve potentials. When accurate auditory data are desired, the specific optimal temperature and its possible seasonal variation require consideration. This increases the need for proper identification of subjects by name and origin, and for monitoring experimental thermal parameters, including pre-experimental acclimation.     

An improved method for the microscale preparation and characterization of hapten-protein conjugates: the use of cholesterol as a model for nonchromophore hydroxylated haptens

A minute amount (0.446 micromol) of cholesterol (Chol) was converted into an hemisuccinate derivative (Chol HS) using an excess of succinic anhydride. The optimal conditions for synthesis of Chol HS were explored by checkerboard experiments in which various succinic anhydride/Chol molar ratios ranging from 5:1 to 30:1 were assayed over a wide temperature range (50-85 degrees C) and for various incubation times (3-8 h). Total conversion was obtained at the higher reagent ratios, temperatures, and incubation times. Subsequently, this carboxylic derivative was first covalently linked to bovine serum albumin (BSA) then to various proteins (casein, ovalbumin, and hemocyanins) or to a synthetic homopolymer (poly-DL-Lysine) via a modified version of the mixed anhydride method of Erlanger, performed in a reversed micellar medium. The assessment of the number of haptenic groups per mole of BSA (epitope density) was achieved chromatographically by two methods according to a Chol standard curve established at 207 nm with linearity in the range 0-50 microg. These procedures involving an alkaline hydrolysis of a sample of either the conjugate (direct method) or the unreacted Chol HS (indirect method) yielded an acceptable level of agreement and concordant results in all cases. The influence of the activated hapten/BSA molar ratio on the coupling efficiency was investigated by the direct method within the range 10:1 to 250:1. Using the optimal conditions determined for Chol HS synthesis (a molar reagent ratio of 30:1 with incubation at 65 degrees C for 6 h) and for BSA haptenation (a 100-fold molar excess of activated hapten, with a carrier stock concentration of 5 mg/mL), epitope density of the conjugates lied between 23 and 27. By reacting the same amount of activated hapten ( approximately 216 microg) with identical amounts of various carriers (300 microg), conjugation efficiency was found similar on a microgram of Chol bound per milligram of carrier basis. This simple and reproducible conjugation and analysis procedures should provide a general method applicable to poorly available and weakly immunogenic haptens bearing hydroxyl groups such as polyether-type marine toxins.     

Purification and characterization of a catalase from photosynthetic bacterium Rhodospirillum rubrum S1 grown under anaerobic conditions

The photosynthetic bacterium, Rhodospirillum rubrum S1, when grown under anaerobic conditions, generated three different types of catalases. In this study, we purified and characterized the highest molecular weight catalase from the three catalases. The total specific catalase activity of the crude cell extracts was 88 U/mg. After the completion of the final purification step, the specific activity of the purified catalase was 1,256 U/mg. The purified catalase evidenced an estimated molecular mass of 318 kDa, consisting of four identical subunits, each of 79 kDa. The purified enzyme exhibited an apparent Km value of 30.4 mM and a Vmax of 2,564 U against hydrogen peroxide. The enzyme also exhibited a broad optimal pH (5.0-9.0), and remained stable over a broad temperature range (20 degrees C-60 degrees C). It maintained 90% activity against organic solvents (ethanol/chloroform) known hydroperoxidase inhibitors, and exhibited no detectable peroxidase activity. The catalase activity of the purified enzyme was reduced to 19% of full activity as the result of the administration of 10 mM 3-amino-1,2,4-triazole, a heme-containing catalase inhibitor. Sodium cyanide, sodium azide, and hydroxylamine, all of which are known heme protein inhibitors, inhibited catalase activity by 50% at concentrations of 11.5 microM, 0.52 microM, and 0.11 microM, respectively. In accordance with these findings, the enzyme was identified as a type of monofunctional catalase.     

Optimization of PCR conditions to amplify Cyt b, COI and 12S rRNA gene fragments of Malayan gaur (Bos gaurus hubbacki) mtDNA

PCR has been extensively used for amplification of DNA sequences. We conducted a study to obtain the best amplification conditions for cytochrome b (Cyt b), cytochrome c oxidase I (COI) and 12S rRNA (12S) gene fragments of Malayan gaur mtDNA. DNA from seven Malayan gaur samples were extracted for PCR amplification. Various trials and combinations were tested to determine the best conditions of PCR mixture and profile to obtain the best PCR products for sequencing purposes. Four selected target factors for enhancing PCR, annealing temperature, concentration of primer pairs, amount of Taq polymerase, and PCR cycle duration, were optimized by keeping the amount of DNA template (50 ng/μL) and concentration of PCR buffer (1X), MgCl(2) (2.5 mM) and dNTP mixture (200 μM each) constant. All genes were successfully amplified, giving the correct fragment lengths, as assigned for both forward and reverse primers. The optimal conditions were determined to be: 0.1 μM primers for Cyt b and COI, 0.3 μM primers for 12S, 1 U Taq polymerase for all genes, 30 s of both denaturation and annealing cycles for Cyt b, 1 min of both stages for 12S and COI and annealing temperature of 58.4 ° C for Cyt b, 56.1 ° C for 12S and 51.3 ° C for COI. PCR products obtained under these conditions produced excellent DNA sequences.     

Purification, stability and kinetic properties of highly purified adenosine deaminase from Bacillus cereus NCIB 8122

Adenosine deaminase (adenosine aminohydrolase, EC 3.5.4.4) from Bacillus cereus NCIB 8122 has been purified to electrophoretic homogeneity by ammonium sulfate precipitation, gel filtration through Sephadex G-100, DEAE-Sephadex A-50 chromatography and ion-exchange HPLC on DEAE-Polyol. The enzyme activity is stabilized (at temperatures from 0 degrees C to 40 degrees C) by 50 mM NH4+ or K+, while it is irreversibly lost in the absence of these or a few other monovalent cations. Glycerol (24% by volume) helps the cation in stabilizing the enzyme activity above 40 degrees C, but also exerts per se a noticeable protecting effect at room temperature. B. cereus adenosine deaminase displays the following properties: Mr on Sephadex G-200, 68,000; Mr in SDS-polyacrylamide gel electrophoresis, 53,700; optimal pH-stability (in the presence of 50 mM KCl) over the range 8-11 at 4 degrees C, and maximal catalytic activity at 30 degrees C between pH 7 and 10; Km for adenosine around 50 microM over the same pH range and Km for 2'-deoxyadenosine around 400 microM.     

Biology of Cerotoma arcuatus (Coleoptera: Chrysomelidae) and field validation of a laboratory model for temperature requirements

Cerotoma arcuatus Olivier is a polyphagous pest of legumes [soybean, Glycine max (L.); dry beans, Phaseolus vulgaris (L.); and cowpeas, Vigna unguiculata (L.)], all of which are considered important protein sources for humans and domestic animals. Studies on the biology and temperature requirements of C. arcuatus were made under laboratory and field (cage) conditions. In the laboratory, insects were reared on soybean plants in incubators held at 18, 20, 22, 25, 28, 30, or 32 degrees C, 70 +/- 10% RH, and a photoperiod of 14:10 (L:D) h. A degree-days (DD) model developed based on the incubator data were validated in the field based on air and soil temperatures. The duration of the egg, larva-to-adult, and egg-to-adult period was inversely correlated with the temperature within the range of 18-32 degrees C, with the highest viability found from 20 to 30 degrees C. The temperature threshold for development and the thermal constant for the egg phase and the larva-to-adult periods were 13.6 degrees C and 106.7 DD, 8.3 degrees C and 399.4 DD, and 10.7 degrees C and 489.0 DD, respectively. The DD model for the egg-to-adult period, calculated using constant temperatures in the laboratory, was found to be valid for populations of C. arcuatus in the field, based on the fluctuating air and soil temperatures, although air temperatures provided more precise predictions. These data provide support for the rational control of this pest through population predictions based on their temperature requirements.