Properties of the Bacillus subtilis spore coat.

About 70% of the protein in isolated Bacillus subtilis spore coats was solubilized by treatment with a combination of reducing and denaturing agents at alkaline pH. The residue, consisting primarily of protein, was insoluble in a variety of reagents. The soluble proteins were resolved into at least seven bands by sodium dodecyl sulfate gel electrophoresis. About one-half of the total was four proteins of 8,000 to 12,000 daltons. These were relatively tyrosine rich, and one was a glycoprotein. There was also a cluster of proteins of about 40,000 daltons and two or three in the 20,000- to 25,000-dalton range. The insoluble fraction had an amino acid composition and N-terminal pattern of amino acids very similar to those of the soluble coat proteins. A major difference was the presence of considerable dityrosine in performic acid-oxidized preparations of insoluble coats. Coat antigen including a 60,000-dalton protein not present in extracts of mature spores was detected in extracts of sporulating cells by immunoprecipitation. This large antigen turned over in a pulse-chase experiment. Antibodies to either the array of 8,000- to 12,000-dalton coat polypeptides or to the larger coat proteins reacted with this 60,000-dalton species, suggesting a common precursor for many of the mature coat polypeptides. Spore coats seem to be assembled by processing of proteins and by secondary modifications including perhaps dityrosine formation for cross-linking.     

Formation of the Dictyostelium spore coat

The spore coat forms as a rigid extracellular wall around each spore cell during culmination. Coats purified from germinated spores contain multiple protein species and an approximately equal mass of polysaccharide, consisting mostly of cellulose and a galactose/N-acetylgalactosamine polysaccharide (GPS). All but the cellulose are prepackaged during prespore cell differentiation in a regulated secretory compartment, the prespore vesicle. The morphology of this compartment resembles an anastomosing, tubular network rather than a spherical vesicle. The molecules of the prespore vesicles are not uniformly mixed but are segregated into partially overlapping domains. Although lysosomal enzymes have been found in the prespore vesicle, this compartment does not function as a lysosome because it is not acidic, and a common antigen associated with acid hydrolases is found in another, acidic vesicle population. All the prespore vesicle profiles disappear at the time of appearance of their contents outside of the cell; this constitutes an early stage in spore coat formation, which can be detected both by microscopy and flow cytometry. As an electron-dense layer, the future outer layer of the coat, condenses, cellulose can be found and is located immediately beneath this outer layer. Certain proteins and the GPS become associated with either the outer or inner layers surrounding this middle cellulose layer. Assembly of the inner and outer layers occurs in part from a pool of glycoproteins that is shared between spores, and unincorporated molecules loosely reside in the interspore matrix, a location from which they can be easily washed away. When the glycosylation of several major protein species is disrupted by mutation, the coat is assembled, but differences are found in its porosity and the extractibility of certain proteins. In addition, the retention or loss of proteolytic fragments in the mutants indicates regions of spore coat proteins that are required for association with the coat. Comparative examination of the macrocyst demonstrates that patterns of molecular distributions are not conserved between the macrocyst and spore coats. Thus spore coat assembly is characterized by highly specific intermolecular interactions, leading to saturable associations of individual glycoproteins with specific layers and the exclusion of excess copies to the interspore space.     

Comparative antigenicity of spore coat proteins from Bacillus species using antibody to spore coat proteins of Bacillus megaterium

Spore coat proteins obtained by extraction with sodium dodecylsulfate/dithiothreitol from six Bacillus spores were compared by immunoblot analysis using antibodies to spore coat proteins from two strains of B. megaterium. Although the extract from spores of each strain had heterogenous proteins with various molecular weights, there were some bands which cross-reacted with specific antibodies from B. megaterium spores. Specific antibody to 48K protein from B. megaterium ATCC 12872 cross-reacted with 17K protein from B. megaterium ATCC 19213, 13K protein from B. cereus and 50K protein from B. subtilis 60015 and B. subtilis NRRL B558. Also, specific antibody to 22K protein from the same strain cross-reacted with 22K and 17K proteins from B. megaterium ATCC 19213 and 13K protein from B. cereus T. Specific antibody to 17K protein from B. megaterium ATCC 19213 reacted with 22K and 19K proteins in addition to 17K protein of own strain, and it was cross-reactive with 16K protein from B. megaterium ATCC 12872, 19K and 27K proteins from B. thiaminolyticus, 13K protein from B. cereus.     

Bacillus subtilis spore coat assembly requires cotH gene expression.

Endospores of Bacillus subtilis are encased in a protein shell, known as the spore coat, composed of a lamella-like inner layer and an electron-dense outer layer. We report the identification and characterization of a gene, herein called cotH, located at 300 degrees on the B. subtilis genetic map between two divergent cot genes, cotB and cotG. The cotH open reading frame extended for 1,086 bp and corresponded to a polypeptide of 42.8 kDa. Spores of a cotH null mutant were normally heat, lysozyme, and chloroform resistant but were impaired in germination. The mutant spores were also pleiotropically deficient in several coat proteins, including the products of the previously cloned cotB, -C, and -G genes. On the basis of the analysis of a cotE cotH double mutant, we infer that CotH is probably localized in the inner coat and is involved in the assembly of several proteins in the outer layer of the coat.     

Synthesis of Bacillus cereus spore coat protein

The major structural protein of Bacillus cereus spore coats was synthesized, commencing 1 to 2 h after the end of exponential growth, as a precursor with a mass of ca. 65,000 daltons. About 40% of this precursor, i.e. 26,000 daltons, was converted to spore coat monomers of 13,000 daltons each, perhaps as disulfide-linked dimers. The rate of conversion varied, being initially slow, most rapid at the time of morphogenesis of the coat layers, and then slow again late in sporulation, coincident with a decrease in intracellular protease activity. There was a second major spore coat polypeptide of about 26,000 daltons that was extractable from mature spores in variable amounts. This protein had a peptide profile and a reactivity with spore coat protein antibody that were very similar to those of the 13,000-dalton monomers. It is probably a disulfide-linked dimer that is not readily dissociated.     

Phosphorylation of spore coat proteins during development of Dictyostelium discoideum.

Immunological evidence is presented which confirms that pp95, one of the major phosphoproteins accumulated in development of the cellular slime mould Dictyostelium discoideum, is identical with spore coat protein SP13. The site of phosphorylation is identified as phosphoserine. The second major phosphorylated component, pp74, corresponds to two co-migrating spore coat proteins known collectively as SP74.     

Studies on the bacterial spore coat. 6. Effects of alkali extraction on the spore of Bacillus thiaminolyticus

Thin sections of the spore of Bacillus thiaminolyticus Matsukawa and Misawa show a characteristic surface structure with five ridges, and a series of three distinct layers. The outer layer of the spore coat was peeled off by SDS sonic treatment, and then the middle layer was solubilized by alkali extraction of the SDS sonic-treated spore. The spores subjected to these treatments were still refractile, heat resistant, and contained dipicolinic acid, but lost their resistance to mechanical shock.     

Studies on the bacterial spore coat 6 effects of alkali extraction on the spore of Bacillus thiaminolyticus.

Thin sections of the spore of Bacillus thiaminolyticus Matsukawa and Misawa show a characteristic surface structure with five ridges, and a series of three district layers. The outer layer of the spore coat was peeled off by SDS sonic treatment, and than the middle layer was solubilized by alkali extraction of the SDS sonic-treated spore. The spores subjected to these treatments were still refractile, heat resistant, and contained dipicolinic acid, but lost their resistance to mechanical shock.     

Properties of Bacillus cereus temperature-sensitive mutants altered in spore coat formation.

Three conditional Bacillus cereus mutants altered in the assembly or formation of spore coat layers were analyzed. They all grew as well as the wild type in an enriched or minimal medium but produced lysozyme and octanol-sensitive spores at the nonpermissive temperature (35 to 38 degrees C). The spores also germinated slowly when produced at 35 degrees C. Temperature-shift experiments indicated that the defective protein or regulatory signal is expressed at the time of formation of the outer spore coat layers. Revertants regained all wild-type spore properties at frequencies consistent with initial point mutations. Spore coat defects were evident in thin sections and freeze-etch micrographs of mutant spores produced at 35 degrees C. In addition, one mutant contained an extra surface deposit, perhaps unprocessed spore coat precursor protein. A prevalent band of about 65,000 daltons (the same size as the presumptive precursor) was present in spore coat extracts of this mutant and may be incorrectly processed to mature spore coat polypeptides. Another class of mutants was defective in the late uptake of half-cystine residues into spore coats. Such a defect could lead to improper formation of the outer spore coat layers.     

The Bacillus subtilis spore coat protein interaction network

Bacterial spores are surrounded by a morphologically complex, mechanically flexible protein coat, which protects the spore from toxic molecules. The interactions among the over 50 proteins that make up the coat remain poorly understood. We have used cell biological and protein biochemical approaches to identify novel coat proteins in Bacillus subtilis and describe the network of their interactions, in order to understand coat assembly and the molecular basis of its protective functions and mechanical properties. Our analysis characterizes the interactions between 32 coat proteins. This detailed view reveals a complex interaction network. A key feature of the network is the importance of a small subset of proteins that direct the assembly of most of the coat. From an analysis of the network topology, we propose a model in which low-affinity interactions are abundant in the coat and account, to a significant degree, for the coat's mechanical properties as well as structural variation between spores.