Molecular engineering of antibodies for therapeutic and diagnostic purposes

During the past ten years, monoclonal antibodies (mAbs) have taken center stage in the field of targeted therapy and diagnosis. This increased interest in mAbs is due to their binding accuracy (affinity and specificity) together with the original molecular and structural rules that govern interactions with their cognate antigen. In addition, the effector properties of antibodies constitute a second major advantage associated with their clinical use. The development of molecular and structural engineering and more recently of in vitro evolution of antibodies has opened up new perspectives in the de novo design of antibodies more adapted to clinical and diagnostic use. Thus, efforts are regularly made by researchers to improve or modulate antibody recognition properties, to adapt their pharmacokinetics, engineer their stability, and control their immunogenicity. This review presents the latest molecular engineering results on mAbs with therapeutic and diagnostic applications.     

Engineered Fc based antibody domains and fragments as novel scaffolds

Therapeutic monoclonal antibodies (mAbs) have been successful for the therapy of a number of diseases mostly cancer and immune disorders. However, the vast majority of mAbs approved for clinical use are full size, typically in IgG1 format. These mAbs may exhibit relatively poor tissue penetration and restricted epitope access due to their large size. A promising solution to this fundamental limitation is the engineering of smaller scaffolds based on the IgG1 Fc region. These scaffolds can be used for the generation of libraries of mutants from which high-affinity binders can be selected. Comprised of the CH2 and CH3 domains, the Fc region is important not only for the antibody effector function but also for its long half-life. This review focuses on engineered Fc based antibody fragments and domains including native (dimeric) Fc and monomeric Fc as well as CH2 and monomeric CH3, and their use as novel scaffolds and binders. The Fc based binders are promising candidate therapeutics with optimized half-life, enhanced tissue penetration and access to sterically restricted binding sites resulting in an increased therapeutic efficacy. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.     

Phage antibody display libraries: a powerful antibody discovery platform for immunotherapy

Phage display technology (PDT), a combinatorial screening approach, provides a molecular diversity tool for creating libraries of peptides/proteins and discovery of new recombinant therapeutics. Expression of proteins such as monoclonal antibodies (mAbs) on the surface of filamentous phage can permit the selection of high affinity and specificity therapeutic mAbs against virtually any target antigen. Using a number of diverse selection platforms (e.g. solid phase, solution phase, whole cell and in vivo biopannings), phage antibody libraries (PALs) from the start point provides great potential for the isolation of functional mAb fragments with diagnostic and/or therapeutic purposes. Given the pivotal role of PDT in the discovery of novel therapeutic/diagnostic mAbs, in the current review, we provide an overview on PALs and discuss their impact in the advancement of engineered mAbs.     

High-throughput screening for developability during early-stage antibody discovery using self-interaction nanoparticle spectroscopy

The discovery of monoclonal antibodies (mAbs) that bind to a particular molecular target is now regarded a routine exercise. However, the successful development of mAbs that (1) express well, (2) elicit a desirable biological effect upon binding, and (3) remain soluble and display low viscosity at high concentrations is often far more challenging. Therefore, high throughput screening assays that assess self-association and aggregation early in the selection process are likely to yield mAbs with superior biophysical properties. Here, we report an improved version of affinity-capture self-interaction nanoparticle spectroscopy (AC-SINS) that is capable of screening large panels of antibodies for their propensity to self-associate. AC-SINS is based on concentrating mAbs from dilute solutions around gold nanoparticles pre-coated with polyclonal capture (e.g., anti-Fc) antibodies. Interactions between immobilized mAbs lead to reduced inter-particle distances and increased plasmon wavelengths (wavelengths of maximum absorbance), which can be readily measured by optical means. This method is attractive because it is compatible with dilute and unpurified mAb solutions that are typical during early antibody discovery. In addition, we have improved multiple aspects of this assay for increased throughput and reproducibility. A data set comprising over 400 mAbs suggests that our modified assay yields self-interaction measurements that are well-correlated with other lower throughput assays such as cross-interaction chromatography. We expect that the simplicity and throughput of our improved AC-SINS method will lead to improved selection of mAbs with excellent biophysical properties during early antibody discovery.     

Development of new versions of anti-human CD34 monoclonal antibodies with potentially reduced immunogenicity

Despite the widespread clinical use of CD34 antibodies for the purification of human hematopoietic stem/progenitor cells, all the current anti-human CD34 monoclonal antibodies (mAbs) are murine, which have the potential to elicit human antimouse antibody (HAMA) immune response. In the present study, we developed three new mouse anti-human CD34 mAbs which, respectively, belonged to class I, class II and class III CD34 epitope antibodies. In an attempt to reduce the immunogenicity of these three murine mAbs, their chimeric antibodies, which consisted of mouse antibody variable regions fused genetically to human antibody constant regions, were constructed and characterized. The anti-CD34 chimeric antibodies were shown to possess affinity and specificity similar to that of their respective parental murine antibodies. Due to the potentially better safety profiles, these chimeric antibodies might become alternatives to mouse anti-CD34 antibodies routinely used for clinical application.     

High-throughput screening for developability during early-stage antibody discovery using self-interaction nanoparticle spectroscopy

The discovery of monoclonal antibodies (mAbs) that bind to a particular molecular target is now regarded a routine exercise. However, the successful development of mAbs that (1) express well, (2) elicit a desirable biological effect upon binding, and (3) remain soluble and display low viscosity at high concentrations is often far more challenging. Therefore, high throughput screening assays that assess self-association and aggregation early in the selection process are likely to yield mAbs with superior biophysical properties. Here, we report an improved version of affinity-capture self-interaction nanoparticle spectroscopy (AC-SINS) that is capable of screening large panels of antibodies for their propensity to self-associate. AC-SINS is based on concentrating mAbs from dilute solutions around gold nanoparticles pre-coated with polyclonal capture (e.g., anti-Fc) antibodies. Interactions between immobilized mAbs lead to reduced inter-particle distances and increased plasmon wavelengths (wavelengths of maximum absorbance), which can be readily measured by optical means. This method is attractive because it is compatible with dilute and unpurified mAb solutions that are typical during early antibody discovery. In addition, we have improved multiple aspects of this assay for increased throughput and reproducibility. A data set comprising over 400 mAbs suggests that our modified assay yields self-interaction measurements that are well-correlated with other lower throughput assays such as cross-interaction chromatography. We expect that the simplicity and throughput of our improved AC-SINS method will lead to improved selection of mAbs with excellent biophysical properties during early antibody discovery.     

Using structural analysis to generate parasite-selective monoclonal antibodies

Diagnosis of eukaryotic parasitic infection using antibody-based tests such as ELISAs (enzyme-linked immunosorbent assays) is often problematic because of the need to differentiate between homologous host and pathogen proteins and to ensure that antibodies raised against a peptide will also bind to the peptide in the context of its three-dimensional protein structure. Filariasis caused by the nematode, Brugia malayi, is an important worldwide tropical disease in which parasites disappear from the bloodstream during daylight hours, thus hampering standard microscopic diagnostic methods. To address this problem, a structural approach was used to develop monoclonal antibodies (mAbs) that detect asparaginyl-tRNA synthetase (AsnRS) secreted from B. malayi. B. malayi and human AsnRS amino acid sequences were aligned to identify regions that are relatively unconserved, and a 1.9 A crystallographic structure of B. malayi AsnRS was used to identify peptidyl regions that are surface accessible and available for antibody binding. Sequery and SSA (Superpositional Structural Analysis) software was used to analyze which of these peptides was most likely to maintain its native conformation as a synthetic peptide, and its predicted helical structure was confirmed by NMR. A 22-residue peptide was synthesized to produce murine mAbs. Four IgG(1) mAbs were identified that recognized the synthetic peptide and the full-length parasite AsnRS, but not human AsnRS. The specificity and affinity of mAbs was confirmed by Western blot, immunohistochemistry, surface plasmon resonance, and enzyme inhibition assays. These results support the success of structural modeling to choose peptides for raising selective antibodies that bind to the native protein.     

Recent advances in the generation of human monoclonal antibody

The use of monoclonal antibodies (mAbs) has now gained a niche as an epochal breakthrough in medicine. Engineered antibodies (Abs) currently account for over 30% of biopharmaceuticals in clinical trials. Several methods to generate human mAbs have evolved, such as (1) immortalization of antigen-specific human B cell hybridoma technology, (2) generation of chimeric and humanized antibody (Ab) from mouse Ab by genetic engineering, (3) acquisition of antigen-specific human B cells by the phage display method, and (4) development of transgenic mice for producing human mAbs. Besides these technologies, we have independently developed a method to generate human mAbs by combining the method of in vitro immunization using peripheral blood mononuclear cells and the phage display method. In this paper, we review the developments in these technologies for generating human mAbs.     

The role of therapeutic antibodies in drug discovery

The last 5 years have seen a major upturn in the fortune of therapeutic monoclonal antibodies (mAbs), with nine mAbs approved for clinical use during this period and more than 70 now in clinical trials beyond phase II. Sales are expected to reach $4 billion per annum worldwide in 2002 and $15 billion by 2010. This success can be related to the engineering of mouse mAbs into mouse/human chimaeric antibodies or humanized antibodies, which have had a major effect on immunogenicity, effector function and half-life. The issue of repeated antibody dosing at high levels with limited toxicity was essential for successful clinical applications. Emerging technologies (phage display, human antibody-engineered mice) have created a vast range of novel, antibody-based therapeutics, which specifically target clinical biomarkers of disease. Modified recombinant antibodies have been designed to be more cytotoxic (toxin delivery), to enhance effector functions (bivalent mAbs) and to be fused with enzymes for prodrug therapy and cancer treatment. Antibody fragments have also been engineered to retain specificity and have increased the penetrability of solid tumours (single-chain variable fragments). Radiolabelling of antibodies has now been shown to be effective for cancer imaging and targeting. This article focuses on developments in the design and clinical use of recombinant antibodies for cancer therapy.     

Toxoplasma gondii: ultrastructural localization of specific antigens and inhibition of intracellular multiplication by monoclonal antibodies

This experiment was focused on the characterization of anti-Toxoplasma monoclonal antibodies (mAbs) and the effect of mAbs on the parasite invasion of mouse peritoneal macrophages. Twenty eight mAbs including M110, M556, R7A6 and M621 were characterized by Ab titer, immunoglobulin isotyping and western blot pattern. Antibody titer (optical density) of 4 mAbs, M110, M556, R7A6 and M621, were 0.53, 0.67, 0.45 and 0.39 (normal mouse serum; 0.19) with the same IgG1 isotypes shown by Enzyme-linked immunosorbent assay (ELISA). Western blot analysis showed that M110, M556, R7A6 and M621 reacted with the 33 kDa (p30), 31 kDa (p28), 43 kDa and 36 kDa protein. Immunogold labelling of mAbs M110, M556, R7A6 and M621 reacted with the surface membrane, dense granules and parasitophorous vacuolar membrane (PVM), rhoptries and cytoplasm of tachyzoite, respectively. For in vitro assay, preincubation of tachyzoites with four mAbs, M110, M556, R7A6 and M621 resulted in the decrease of the number of infected macrophages (p < 0.05) and the suppression of parasite multiplication at 18 h post-infection. Four monoclonal antibodies including M110 (SAG1) were found to have an important role in the inhibition of macrophage invasion and T. gondii multiplication in vitro, and these mAbs may be suitable for vaccine candidates, diagnostic kit and for chemotherapy.     

Epitope specificity of two anti‐morphine monoclonal antibodies: In vitro and in silico studies

Monoclonal antibodies (mAbs) against morphine are important in the development of immunotherapeutic and diagnostic methods for the treatment and prevention of drug addiction. By the surface plasmon resonance (SPR) and enzyme immunoassay techniques, we characterized two previously obtained mAbs 3K11 and 6G1 and showed their ability to recognize free morphine and morphine‐containing antigens in different ways because of the epitope specificity thereof. Using the defined amino acid sequences, we obtained three‐dimensional models of the variable regions of Fab fragments of these antibodies and compared them with the known sequence and spatial structure of the anti‐morphine antibody 9B1. Docking simulations are performed to obtain models of the antibodies complexes with morphine. Differences in the models of 3K11 and 6G1 complexes with morphine correlate with their experimentally detected epitope specificity. The results, in particular, can be used for the structure‐based design of the corresponding humanized antibodies. According to our modeling and docking results, the very different modes of morphine binding to mAbs 3K11 and 6G1 are qualitatively similar to those previously reported for cocaine and two anti‐cocaine antibodies. Thus, the obtained structural information brings more insight into the hapten recognition diversity.     

Influence of improved FcRn binding on the subcutaneous bioavailability of monoclonal antibodies in cynomolgus monkeys

Engineering monoclonal antibodies (mAbs) with improved binding to the neonatal Fc receptor (FcRn) is a strategy that can extend their in vivo half-life and slow their systemic clearance. Published reports have predominantly characterized the pharmacokinetics of mAbs after intravenous administration. Recently, studies in mice suggest FcRn may also play a role in affecting the subcutaneous bioavailability of mAbs. Herein, we examined whether five mAbs engineered with the T250Q/M428L Fc mutations that improved their FcRn interactions, and subsequently their in vivo pharmacokinetics after intravenous administration, had improved subcutaneous bioavailability compared with their wild-type counterparts in cynomolgus monkeys. Similar to the intravenous administration findings, the pharmacokinetic profiles of our variant mAbs after subcutaneous injection showed improved half-life or clearance. In contrast, a clear effect was not observed on the subcutaneous bioavailability. We expect that while FcRn may play a role in determining mAb subcutaneous bioavailability, multiple biopharmaceutical and physiological factors are likely to influence the success of engineering strategies aimed at targeting this pathway for improving bioavailability.     

Engineering Fully Human Monoclonal Antibodies from Murine Variable Regions

Fully human monoclonal antibodies (mAbs) derived from transgenic mice or human antibody libraries are the current state of the art for reducing the immunogenicity risk of antibody drugs. Here, we describe a novel method for generating fully human mAbs from nonhuman variable regions using information from the human germline repertoire. Central to our strategy is the rational engineering of residues within and proximal to CDRs and the V_H/V_L interface by iteratively exploring substitutions to the closest human germline sequences using semi-automated computational methods. Starting from the parent murine variable regions of three currently marketed mAbs targeting CD25, vascular endothelial growth factor, and tumor necrosis factor alpha, we have generated fully human antibodies with 59, 46, and 45 substitutions, respectively, compared to the parent murine sequences. A large number of these substitutions were in the CDRs, which are typically avoided in humanization methods. Antigen affinities of the fully human variants were comparable to the chimeric mAbs in each case. Furthermore, in vitro functional characterization indicated that all retain potency of the chimeric mAbs and have comparable activity to their respective marketed drugs daclizumab, bevacizumab, and infliximab. Based on local and global sequence identity, the sequences of our engineered mAbs are indistinguishable from those of fully human mAbs isolated from transgenic mice or human antibody libraries. This work establishes a simple rational engineering methodology for generating fully human antibody therapeutics from murine mAbs produced from standard hybridoma technology.     

New challenges to medicare beneficiary access to mAbs

Precision binding of monoclonal antibodies (mAbs) to biological targets, their relative clinical success, and expansion of indications following initial approval, are distinctive clinical features. The relatively high cost of mAbs, together with the absence of a regulatory pathway to generics, stand out as distinctive economic features. Based on both literature review and primary data collection we enumerated mAb original approvals, supplemental indications, and off-label uses, assessed payer formulary management of mAbs, and determined new challenges to Medicare beneficiary access to mAbs. We found that the FDA has approved 22 mAbs and 30 supplemental indications pertaining to the originally approved mAbs. In addition, there are 46 off-label use citations in officially recognized pharmaceutical compendia. Across Part B carriers and Part D plans, we found considerable variation in terms of coverage and conditions of reimbursement related to on- and off-label uses of mAbs. Our results point to four major challenges facing mAb developers, health care providers, Medicare beneficiaries, payers, and policymakers. These include administrative price controls, coverage variation, projected shift from physician- to self-administered mAbs, and comparative effectiveness. We suggest more systematic use of “coverage with evidence development” as a means of optimally addressing these challenges.     

Structural understanding of stabilization patterns in engineered bispecific Ig‐like antibody molecules

Bispecific immunoglobulin‐like antibodies capable of engaging multiple antigens represent a promising new class of therapeutic agents. Engineering of these molecules requires optimization of the molecular properties of one of the domain components. Here, we present a detailed crystallographic and computational characterization of the stabilization patterns in the lymphotoxin‐beta receptor (LTβR) binding Fv domain of an anti‐LTβR/anti‐TNF‐related apoptosis inducing ligand receptor‐2 (TRAIL‐R2) bispecific immunoglobulin‐like antibody. We further describe a new hierarchical structure‐guided approach toward engineering of antibody‐like molecules to enhance their thermal and chemical stability. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

Characterization of monoclonal antibody's binding kinetics using oblique-incidence reflectivity difference approach

Monoclonal antibodies (mAbs) against human proteins are the primary protein capture reagents for basic research, diagnosis, and molecular therapeutics. The 2 most important attributes of mAbs used in all of these applications are their specificity and avidity. While specificity of a mAb raised against a human protein can be readily defined based on its binding profile on a human proteome microarray, it has been a challenge to determine avidity values for mAbs in a high-throughput and cost-effective fashion. To undertake this challenge, we employed the oblique-incidence reflectivity difference (OIRD) platform to characterize mAbs in a protein microarray format. We first systematically determined the K_on and K_off values of 50 mAbs measured with the OIRD method and deduced the avidity values. Second, we established a multiplexed approach that simultaneously measured avidity values of a mixture of 9 mono-specific mAbs that do not cross-react to the antigens. Third, we demonstrated that avidity values of a group of mAbs could be sequentially determined using a flow-cell device. Finally, we implemented a sequential competition assay that allowed us to bin multiple mAbs that recognize the same antigens. Our study demonstrated that OIRD offers a high-throughput and cost-effective platform for characterization of the binding kinetics of mAbs.     

Effects of specific monoclonal antibodies to dense granular proteins on the invasion of Toxoplasma gondii in vitro and in vivo

Although some reports have been published on the protective effect of antibodies to Toxoplasma gondii surface membrane proteins, few address the inhibitory activity of antibodies to dense granular proteins (GRA proteins). Therefore, we performed a series of experiments to evaluate the inhibitory effects of monoclonal antibodies (mAbs) to GRA proteins (GRA2, 28 kDa; GRA6, 32 kDa) and surface membrane protein (SAG1, 30 kDa) on the invasion of T. gondii tachyzoites. Passive immunization of mice with one of three mAbs following challenge with a lethal dose of tachyzoites significantly increased survival compared with results for mice treated with control ascites. The survival times of mice challenged with tachyzoites pretreated with anti-GRA6 or anti-SAG1 mAb were significantly increased. Mice that received tachyzoites pretreated with both mAb and complement had longer survival times than those that received tachyzoites pretreated with mAb alone. Invasion of tachyzoites into fibroblasts and macrophages was significantly inhibited in the anti-GRA2, anti-GRA6 or anti-SAG1 mAb pretreated group. Pretreatment with mAb and complement inhibited invasion of tachyzoites in both fibroblasts and macrophages. These results suggest that specific antibodies to dense-granule molecules may be useful for controlling infection with T. gondii.     

Epitope analyses of pneumococcal surface protein A: a combination of two monoclonal antibodies detects 94% of clinical isolates

Immunisation of BALB/c mice with seven heat-treated Norwegian clinical isolates of Streptococcus pneumoniae of different serotypes elicited mainly monoclonal antibodies (mAbs) to pneumococcal surface protein A (PspA). It was remarkable that the fusions resulted only in a few mAbs directed against other protein antigens. Dot blot analysis with 16 mAbs using clinical isolates representing 23 different capsular types and the uncapsulated reference strain R36A showed that some of the mAbs bound to PspA epitopes expressed by a low number of strains whereas others bound to broadly distributed epitopes. On the basis of their reactivities, seven of these mAbs could be divided into two groups recognising different subsets of pneumococci. The three mAbs in the narrow reacting group bound to epitopes found in 21-25% of the strains whereas the four mAbs in the broad reacting group detected more than 57% of the analysed strains. The epitopes for these seven antibodies were surface exposed on live exponential phase grown pneumococci as shown by flow cytometry. The finding that a combination of mAb 180,C-1 (IgG2a) from the first group and mAb 170,E-11 (IgG2a) from the second group detected 94% of the examined strains is interesting because PspA has been reported by others to be a serological highly variable protein.     

Characterization and utility of monoclonal antibodies against spike protein of transmissible gastroenteritis virus

Aims: This work aims to characterize the utility of four newly generated monoclonal antibodies (mAbs) against transmissible gastroenteritis virus (TGEV). Methods and Results: Four monoclonal antibodies (mAbs) against the N‐terminal half of spike protein (S1 protein) of TGEV were identified. Affinity constant of these mAbs was analysed. These mAbs were capable of reacting with the TGEV S1 protein analysed by ELISA and Western blot. A competition assay between the different mAbs was performed to determine whether the different antibodies mapped in the same or a different antigenic region of the protein. Investigation on the neutralizing ability of these mAbs indicated that two of these mAbs completely neutralized TGEV at an appropriate concentration. These mAbs were able to detect the TGEV‐infected cells in immunofluorescence assays and Western blot. Moreover, they differentiated TGEV S protein from other control proteins. Conclusions: The generated four mAbs are very specific, and the established immunofluorescence assays, Western blot and discrimination ELISA are useful approaches for detecting of TGEV. Significance and Impact of the Study: It is a novel report regarding the use of the S1 protein of TGEV to generate specific mAbs. Their utility and the established immunoassays contribute to the surveillance of TGE coronavirus.     

The biotechnology and applications of antibody engineering

The exquisite specificity of monoclonal antibodies (MAb) has long provided the potential for creating new reagents for the in vivo delivery of therapeutic drugs or toxins to defined cellular target sites or improved methods of diagnosis. However, many difficulties associated with their production, affinity, specificity, and use in vivo have largely confined their application to research or in vitro diagnostics. This situation is beginning to change with the recent developments in the applied molecular techniques that allow the engineering of the genes that encode antibodies rather than the manipulation of the intact antibodies themselves. Techniques, such as the polymerase chain reaction, have provided essential methods with which to generate and modify the genetic constituents of antibodies, allow their conjugation to toxins or drugs, provide ways of humanizing murine antibodies, and allow discrete modular antigen binding components to be produced. More recent developments of in vitro expression systems and powerful phage surface display technologies will without doubt play a major role in future antibody engineering and in the successful development of new diagnostic and therapeutic antibody-based reagents.