The use of BrCN for assembling modified DNA duplexes and DNA-RNA hybrids; comparison with water-soluble carbodiimide.

Both cyanogen bromide (BrCN) and 1-ethyl-3-(3'-dimethylaminopropyl) carbodiimide may be used as coupling reagents for the template-directed assembly of DNA duplexes containing the sugar-phosphate backbone modification. Both reagents show similar ligation site structure-specific trend. Practical recommendations are given for selection of the condensing reagent depending on the properties of the duplex. Based on 31P NMR spectroscopy data, a scheme is suggested for BrCN activation of the nucleotide phosphomonoester group. Using both condensing reagents, we studied the condensation of oligonucleotides containing ribo-segments (from mononucleotide residue to full sequence) on the DNA template. Efficiency of the chemical ligation of RNA oligomers was shown to be much lower than that of DNA analogues. The coupling yield depends on the position of the RNA segment in the hybrid duplexes and on the position of the phosphate group in the nick.     

The role of reactivity in DNA templated native chemical PNA ligation during PCR

DNA templated fluorogenic reactions have been used as a diagnostic tool for the sequence specific detection of nucleic acids; and it has been shown that the native chemical ligation between thioester- and 1,2-aminothiol-modified PNA probes is amongst the most selective DNA detection methods reported. We explored whether a DNA templated reaction can be interfaced with the polymerase chain reaction (PCR). This endeavor posed a significant challenge. The reactive groups involved must be sufficiently stable to tolerate the high temperature applied in the PCR process. Nevertheless, the ligation reaction must proceed very rapidly and sequence specifically within the short time available in the annealing and primer extension steps before denaturation is used after approx. 1 min to commence the next PCR cycle. This required a careful optimization of the ternary complex architecture as well as adjustments of probe length and probe reactivities. Our results point to the prime importance of the ligation architecture. We show that once suitable annealing sites have been identified less reactive probe sets may be preferable if sequence specificity is of major concern. The reactivity tuning enabled the development of an in-PCR ligation, which was used for the single nucleotide specific typing of the V600E (T1799A) point mutation in the human BRaf gene. Showcasing the efficiency and sequence specificity of native chemical PNA ligation, attomolar template proofed sufficient to trigger signal while a 1000-fold higher load of single mismatched template failed to induce appreciable signal.     

Genotyping by apyrase-mediated allele-specific extension

This report describes a single-step extension approach suitable for high-throughput single-nucleotide polymorphism typing applications. The method relies on extension of paired allele-specific primers and we demonstrate that the reaction kinetics were slower for mismatched configurations compared with matched configurations. In our approach we employ apyrase, a nucleotide degrading enzyme, to allow accurate discrimination between matched and mismatched primer-template configurations. This apyrase-mediated allele-specific extension (AMASE) protocol allows incorporation of nucleotides when the reaction kinetics are fast (matched 3′-end primer) but degrades the nucleotides before extension when the reaction kinetics are slow (mismatched 3′-end primer). Thus, AMASE circumvents the major limitation of previous allele-specific extension assays in which slow reaction kinetics will still give rise to extension products from mismatched 3′-end primers, hindering proper discrimination. It thus represents a significant improvement of the allele-extension method. AMASE was evaluated by a bioluminometric assay in which successful incorporation of unmodified nucleotides is monitored in real-time using an enzymatic cascade.     

DNA helicase E and DNA polymerase epsilon functionally interact for displacement synthesis.

A functional interaction between DNA helicase E and DNA polymerase epsilon from calf thymus has been detected which results in the extension of an upstream 3' OH through a downstream primer to the end of a synthetic template. DNA synthesis resulting in full-length extension products was dependent on the addition of DNA helicase E and hydrolysis of ATP, suggesting that displacement of the downstream primer was required. Identical reactions using DNA polymerases alpha and delta in place of DNA polymerase epsilon showed no full-length products dependent on helicase E, indicating that polymerases alpha and delta were incapable of functionally interacting with the helicase. The reaction leading to full-length extension products was time dependent and dependent on the concentration of added polymerase epsilon and helicase E. Exonucleolytic degradation of the downstream primer, or ligation of the downstream primer to the upstream 3' OH, were not responsible for the full-length products observed. Displacement of the downstream primer by DNA helicase E was not affected by the addition of polymerase epsilon to the reactions. Template dilution experiments demonstrated that DNA polymerase epsilon and helicase E were acting in concert to perform displacement synthesis. Additional evidence for functional coordination was obtained by demonstration that DNA helicase E stimulated DNA polymerase epsilon in a standard DNA synthetic assay using dA3000.dT16 as the template-primer. The results presented are consistent with the hypothesis that DNA helicase E and DNA polymerase epsilon are capable of coordinated activities that result in displacement synthesis. A functional interaction of this sort may be involved at the eukaryotic replication fork or in DNA repair.     

MALDI-TOF mass spectrometric typing of single nucleotide polymorphisms with mass-tagged ddNTPs.

A matrix-assisted laser desorption/ionization time-of-flight mass spectrometry based method has recently been reported for the typing of single nucleotide polymorphisms using single nucleotide primer extension. This method is limited in some cases by the resolution of the mass determination, as the mass difference between nucleotides can be as little as 9 Da (the difference between A and T). A variation of this method is described here in which a mass-tagged dideoxynucleotide is employed in the primer extension reactions in place of the unmodified dideoxynucleotide. The increased mass difference due to the presence of the mass-tags substantially improves the accuracy and versatility of the procedure.     

Chemical primer extension: individual steps of spontaneous replication

The replication of genetic information, as we know it from today's biology, relies on template-directed, polymerase-catalyzed extension of primers. It is known that short stretches of complementary RNA can form on templates in the absence of enzymes. This account summarizes recent work on efficient enzyme-free primer extension, both with 3'-amino-terminal deoxyribonucleotide primers and with primers made of unmodified RNA. Near-quantitative primer extension with half-life times on the order of hours has been demonstrated by using azaoxybenzotriazolides of nucleotides and downstream-binding oligomers. Further, small non-nucleosidic substituents placed on the terminus of the template or the downstream-binding oligomer have been shown to increase the rate and fidelity of primer-extension reactions. Since all four templating bases (A, C, G, T/U) direct sequence-selective primer-extension steps, we feel that there is renewed hope that full, nonenzymatic replication from monomers may eventually be achieved.     

Enzyme‐Free Ligation of 5′‐Phosphorylated Oligodeoxynucleotides in a DNA Nanostructure

Multicomponent reactions are difficult synthetic transformations. For DNA, there is a special opportunity to align multiple strands in a folded nanostructure, so that they are preorganized to give a specific sequence. Multistrand reactions in DNA origami structures have previously been performed using photochemical crosslinking, 1,3‐diploar cycloadditions or phosphoramidate‐forming reactions. Here we report carbodiimide‐driven phosphodiester formation in a small origami sheet that produces DNA strands up to 600 nucleotides in length in a single step. The method uses otherwise unmodified oligodeoxynucleotides with a 5′‐terminal phosphate as starting materials. Compared to an enzymatic multistrand ligation involving linear duplexes, the carbodiimide‐driven ligation gave fewer side products, as detected by gel electrophoresis. The full‐length 600mer product was successfully amplified by polymerase chain reaction.     

Nucleotidyl transferase assisted DNA labeling with different click chemistries

Here, we present a simple, modular and efficient strategy that allows the 3′-terminal labeling of DNA, regardless of whether it has been chemically or enzymatically synthesized or isolated from natural sources. We first incorporate a range of modified nucleotides at the 3′-terminus, using terminal deoxynucleotidyl transferase. In the second step, we convert the incorporated nucleotides, using either of four highly efficient click chemistry-type reactions, namely copper-catalyzed azide-alkyne cycloaddition, strain-promoted azide-alkyne cycloaddition, Staudinger ligation or Diels-Alder reaction with inverse electron demand. Moreover, we create internal modifications, making use of either ligation or primer extension, after the nucleotidyl transferase step, prior to the click reaction. We further study the influence of linker variants on the reactivity of azides in different click reactions. We find that different click reactions exhibit distinct substrate preferences, a fact that is often overlooked, but should be considered when labeling oligonucleotides or other biomolecules with click chemistry. Finally, our findings allowed us to extend our previously published RNA labeling strategy to the use of a different copper-free click chemistry, namely the Staudinger ligation.     

Ligation mediated fluorescent labeling of DNA sequencing primers.

Automated DNA sequencing utilizing fluorescently labeled primers is a proven methodology for generating quality sequence data. However, for directed primer walking strategies this necessitates synthesis and labeling of a unique primer for each sequencing reaction. Here, we describe a rapid ligation-based method of generating labeled sequencing primers. An unlabeled 5'-phosphorylated sequencing primer is ligated to a fluorescent oligonucleotide by use of a bridge primer which is complementary to portions of the previous two oligonucleotides, thus aligning them properly for ligation. The resulting fluorescent hybrid primer can be utilized directly in cycle sequencing reactions without any prior purification.     

Site-specific forced misincorporation mutagenesis using modified T7 DNA polymerase

A new method for forced misincorporation site-specific mutagenesis is described. The method uses an exonuclease-deficient modified version of T7 DNA polymerase in the presence of one dNTP to force a misincorporation. Analysis by PAGE is used to monitor the efficiency of such misincorporation reactions. Brief extension of the terminally mismatched primer/template using the same enzyme in the presence of all four dNTPs is followed by chase/ligation using unmodified T7 DNA polymerase and T4 DNA ligase to give heteroduplex DNA. We have applied the method to mutagenesis of the Lac Z region of M13 and found that, using strand selection, efficiencies of mutagenesis at one site are greater than 50%. When the mutating dNTP is complementary to a neighbouring homopolymeric tract on the template, multiple mutation is observed and efficiences are lower. The method is more general than internal mismatch mutagenesis and, because of its rapidity, is more expedient than existing methods of forced misincorporation mutagenesis.     

N-cyanoimidazole and diimidazole imine: water-soluble condensing agents for the formation of the phosphodiester bond

The reaction of BrCN with imidazole results in the formation of N-cyanoimidazole and diimidazole imine. These compounds were shown to be useful condensing agents for the formation of the phosphodiester bound in aqueous solution.     

A genomic library-based amplification approach (GL-PCR) for the mapping of multiple IS6110 insertion sites and strain differentiation of Mycobacterium tuberculosis

Evidence suggests that insertion of the IS6110 element is not without consequence to the biology of Mycobacterium tuberculosis complex strains. Thus, mapping of multiple IS6110 insertion sites in the genome of biomedically relevant clinical isolates would result in a better understanding of the role of this mobile element, particularly with regard to transmission, adaptability and virulence. In the present paper, we describe a versatile strategy, referred to as GL-PCR, that amplifies IS6110-flanking sequences based on the construction of a genomic library. M. tuberculosis chromosomal DNA is fully digested with HincII and then ligated into a plasmid vector between T7 and T3 promoter sequences. The ligation reaction product is transformed into Escherichia coli and selective PCR amplification targeting both 5' and 3' IS6110-flanking sequences are performed on the plasmid library DNA. For this purpose, four separate PCR reactions are performed, each combining an outward primer specific for one IS6110 end with either T7 or T3 primer. Determination of the nucleotide sequence of the PCR products generated from a single ligation reaction allowed mapping of 21 out of the 24 IS6110 copies of two 12 banded M. tuberculosis strains, yielding an overall sensitivity of 87,5%. Furthermore, by simply comparing the migration pattern of GL-PCR-generated products, the strategy proved to be as valuable as IS6110 RFLP for molecular typing of M. tuberculosis complex strains. Importantly, GL-PCR was able to discriminate between strains differing by a single IS6110 band.     

Interrogation of multimeric DNA amplification products by competitive primer extension using bst DNA polymerase (large fragment).

Linear dsDNA composed of tandem repeats may be exponentially amplified by the strongly strand-displacing Bst DNA polymerase (large fragment) and two primers specific for opposite strands. When the repetitive DNA is derivedfrom rolling circle replication of a circular template, the reaction is termed cascade rolling circle amplification (CRCA). We have developed a variant of CRCA in which one primer is attached to the surface of a microwell and the other is labeled, thus enabling detection of amplified material using an ELISA-like protocol. The circular template is derived by annealing and ligation of a padlock on target DNA. It was found that there was good correlation between the synthesis of amplified material and signal. The specificity of the reaction with respect to single-nucleotide polymorphisms was investigated, and it was found that Bst DNA polymerase is prone to extension from primers with mismatched 3' ends. Reliable single nucleotide specificity was only obtained when pre-synthesized amplified material was interrogated by competitive primer extension.     

Synthesis and use of a pseudo-cysteine for native chemical ligation.

The process of native chemical ligation (NCL) is well described in the literature. An N-terminal cysteine-containing peptide reacts with a C-terminal thioester-containing peptide to yield a native amide bond after transesterification and acyl transfer. An N-terminal cysteine is required as both the N-terminal amino function and the sidechain thiol participate in the ligation reaction. In certain circumstances it is desirable, or even imperative, that the N-terminal region of a peptidic reaction partner remain unmodified, for Instance for the retention of biological activity after ligation. This work discusses the synthesis of a pseudo-N-terminal cysteine building block for incorporation into peptides using standard methods of solid phase synthesis. Upon deprotection, this building block affords a de facto N-terminal cysteine positioned on an amino acid sidechain. which is capable of undergoing native chemical ligation with a thioester. The syntheses of several peptides and structures containing this motif are detailed, their reactions discussed. and further applications of this technology proposed.     

Template-directed polymerization of oligoadenylates using cyanogen bromide

Cyanogen bromide (BrCN) condensed oligoadenylates [oligo(A)] on a poly(uridylic acid) [poly(U)] template in an aqueous solution. Imidazole and divalent metal ions such as Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Mg2+, and Fe2+ were required for the condensation. Chain length of oligo(A) and reaction temperature affected the coupling yield. Hexaadenylate [(pA)6] was converted to (pA)12, (pA)18, (pA)24, (pA)30, (pA)36, (pA)42, and (pA)48 in a 68% overall yield for 20 h at 25 degrees C. The coupling yield increased with increase in the poly(U) concentration. Five- to sevenfold molar excess of uridylyl residues of poly(U) to adenylyl residues of oligo(A) gave the best yield (68%). Metal ions affected the formation of linkage isomers of the phosphate bonds: The 2',5'- and 3',5'-phosphodiester bonds were predominant in the presence of Co2+, Zn2+, and Ni2+ and the 5',5'-pyrophosphate bond was predominant in the presence of Mn2+. In particular, Ni2+ gave the highest ratio of the 3',5'-phosphodiester bond (30%). N-Cyanoimidazole (1), N,N'-iminodiimidazole (2), and N-carboxamidoimidazole (3) were formed in a reaction of imidazole with BrCN in an aqueous solution. 1 and 2 had much the same condensing activity for the polymerization of adenylates as BrCN. A reaction pathway was proposed in which 1 and 2 are not only intermediates for the production of 3 but also the true condensing agent in the coupling reaction of oligo(A). Phosphorimidazolide derivative was detected in a reaction of 5'-AMP with either 1 or 2. The condensation would proceed by way of N-cyanoimidazole-phosphate adduct, the phosphorimidazolide derivative, or both.     

Sequence-Dependent Structural Variations of DNA Revealed by Chemical Ligation

Abstract

The comparative study of nick-sealing efficiency under the action of BrCN or water-soluble carbodiimide was carried out for 14 dinucleotide combinations in double helix. The difference between the lowest (17%, GpG) and the highest (94%, CpT) coupling yields was found to be more than five fold, both condensing reagents showing a similar sequence-specific trend. A strong correlation observed between coupling yields at different dinucleotide combinations and ³¹P NMR parameters supports the idea that variations in chemical ligation efficiency arise from sequence-specific modulations of the helix geometry and confirms close similarity of the intrinsic fine structure of intact and nicked DNAs.     

PCR-free mutation detection of BRCA1 on a zip-code microarray using ligase chain reaction

We describe here ligation-based strategy to detect mutations in BRCA1 utilizing zip-code microarray technology. In our first approach, PCR was performed to amplify the genomic regions containing the mutation sites. The PCR products were then used as templates in a subsequent ligation reaction using two ligation primers that flanked the mutation site. The primary allele-specific primer is designed to contain a base of mutation site at its 3′ end with 5′ complementarity to the respective zip-code sequence while the secondary common primer is modified by biotin at its 3′ end. Depending on the genotype of samples at the mutation site, the nick between the two ligation primers can be sealed in the presence of DNA ligase. The ligation products were then hybridized on the zip-code microarray followed by staining with streptavidine-cy3 to generate a fluorescent signal. Using this strategy we successfully genotyped selected Korean-specific mutation sites in exon 11 of BRCA1 with a wild type and two heterozygote mutant samples. Furthermore, we also demonstrated that ligase chain reaction using unamplified genomic DNA as direct templates is enough to generate sufficient signals for correct genotypings in a multiplexed manner, verifying first that PCR is not essential for this microarray-based strategy.     

Competitive enzymatic reaction to control allele-specific extensions

Here, we present a novel method for SNP genotyping based on protease-mediated allele-specific primer extension (PrASE), where the two allele-specific extension primers only differ in their 3′-positions. As reported previously [Ahmadian,A., Gharizadeh,B., O'Meara,D., Odeberg,J. and Lundeberg,J. (2001), Nucleic Acids Res., 29, e121], the kinetics of perfectly matched primer extension is faster than mismatched primer extension. In this study, we have utilized this difference in kinetics by adding protease, a protein-degrading enzyme, to discriminate between the extension reactions. The competition between the polymerase activity and the enzymatic degradation yields extension of the perfectly matched primer, while the slower extension of mismatched primer is eliminated. To allow multiplex and simultaneous detection of the investigated single nucleotide polymorphisms (SNPs), each extension primer was given a unique signature tag sequence on its 5′ end, complementary to a tag on a generic array. A multiplex nested PCR with 13 SNPs was performed in a total of 36 individuals and their alleles were scored. To demonstrate the improvements in scoring SNPs by PrASE, we also genotyped the individuals without inclusion of protease in the extension. We conclude that the developed assay is highly allele-specific, with excellent multiplex SNP capabilities.     

N-Cyanoimidazole and Diimidazole Imine: Water-Soluble Condensing Agents for the Formation of the Phosphodiester Bond

Abstract

The reaction of BrCN with imidazole results in the formation of N-cyanoimidazole and diimidazole imine. These compounds were shown to be useful condensing agents for the formation of the phosphodiester bond in aqueous solution.     

Fluorescence resonance energy transfer (FRET) using ssDNA binding fluorescent dye

There is a need for simple and inexpensive methods for genotyping single nucleotide polymorphisms (SNPs) and short insertion/deletion variations (InDels). In this work, I demonstrate that a single-stranded DNA (ssDNA) binding dye can be used as a donor fluorophore for fluorescence resonance energy transfer (FRET). The method presented is a homogenous assay in which detection is based on the FRET from the fluorescence of the ssDNA dye bound to the unmodified detection primer to the fluorescent nucleotide analog incorporated into this detection primer during cyclic template directed primer extension reaction. Collection of the FRET emission spectrum with a scanning fluorescence spectrophotometer allows powerful data analysis. The fluorescence emission signal is modified by the optical properties of the assay vessel. This seems to be a completely neglected parameter. By proper selection of the optical properties of the assay plate one can improve the detection of the fluorescence emission signal.