Engineered Tet repressor mutants with single tryptophan residues as fluorescent probes. Solvent accessibilities of DNA and inducer binding sites and interaction with tetracycline

Mutants of the Tn10-encoded Tet repressor containing single or no tryptophan residues were constructed by oligonucleotide-directed mutagenesis. The Trp-75 to Phe exchange reduces the dissociation rate of the complex with the inducer tetracycline by a factor of 2. The Trp-43 to Phe exchange has no effect on inducer binding. The fluorescence emission spectra of both tryptophan residues are quenched to a different extent by binding of tetracycline: Trp-75 is quenched to zero and Trp-43 to only 50%. It is concluded that Trp-75 is in the vicinity of the inducer binding site. The different fluorescence emission spectra of both tryptophan residues depend on the native structure of Tet repressor. Quenching studies with iodide indicate that the DNA binding motif is solvent exposed in free repressor and moves towards the interior of the protein upon inducer binding. The inducer binding site is in the interior of the protein. The fluorescence of tetracycline is enhanced upon binding to Tet repressor. The excitation at 280 nm results mainly from the change in environment and in part from energy transfer from tryptophan to the drug.     

Determination of the equilibrium association constant between Tet repressor and tetracycline at limiting Mg2+ concentrations: a generally applicable method for effector-dependent high-affinity complexes.

An analytical method for determining very high binding constants at equilibrium for reactions requiring an effector is proposed and applied to study the interaction of tetracycline with the repressor of the tetracycline resistance gene from Tn10. In this method complex formation is limited by low concentrations of the effector, which is Mg2+ for the interaction of tetracycline and Tet repressor. The binding of Mg2+ to tetracycline and subsequent formation of the ternary repressor-Mg(2+)-tetracycline complex are coupled reactions yielding a dependence of repressor-tetracycline-Mg2+ complex formation on the concentration of free Mg2+. The binding constants can be determined from the quantitative analysis of ternary complex formation with increasing Mg2+ concentrations. This method allows the determination of very high association constants at equilibrium in a large range of protein concentrations. In the case of repressor and tetracycline, the same affinity constant of 3 +/- 2 x 10(9) M-1 was found in the range of 0.1 to 5 microM of repressor. This result indicates that no association or dissociation of the repressor subunits occurs upon binding of tetracycline. Furthermore, the results show that a repressor dimer binds two effector molecules without significant cooperativity.     

Tet repressor-tetracycline interaction

Previous studies [Wasylewskiet al. (1996),J. Protein Chem. 15, 45–58] have shown that the W43 residue localized within the helix-turn-helix structure domain of Tet repressor can exist in the ground state in two conformational states. In this paper we investigate the fluorescence properties of W43 of TetR upon binding of tetracycline inducer and its chemical analogs such as anhydro- and epitetracycline. Binding of the drug inducer to the protein indicates that the W43 residue still exists in two conformational states; however, its environment changes drastically, as can be judged by the changes in fluorescence parameters. The FQRS (fluorescence-quenching-resolved spectra) method was used to decompose the total emission spectrum. The resolved spectra exhibit maxima of fluorescence at 346 and 332 nm and the component quenchable by KI (346 nm) is shifted 9 nm toward the blue side of the spectrum upon inducer binding. The observed shift does not result from the changes in the exposure of W43, since the bimolecular quenching rate constant remains the same and is equal to about 2.7×10⁹M^–1sec^–1. The binding of tetracycline leads to drastic decrease of the W43 fluorescence intensity and increase of the tetracycline intensity as well as the decrease of fluorescence lifetime, especially of the W43 component characterized by the emission at 332 nm. The observed energy transfer from W43 to tetracycline is more efficient for the state characterized by the fluorescence emission at 332 nm (88%) than for the component quenchable by iodide (53%) Tetracycline and several of its derivatives were also used to observe how chemical modifications of the hydrophilic groups in tetracycline influence the mechanism of binding of the antibiotic to Tet repressor. By use of pulsed-laser photoacoustic spectroscopy it is shown that the binding of tetracyclines to Tet repressor leads to significant increase of tetracycline fluorescence quantum yields. Steady-state fluorescence quenching of tetracycline analogs in complexes with Tet repressor using potassium iodide as a quencher allowed us to determine the dependence of the exposure of bound antibiotic on the modifications of hydrophilic substituents of tetracycline. Circular dichroism studies of the TetR-[Mg · tc]⁺ complex do not indicate dramatic changes in the secondary structure of the protein; however, the observed small decrease in the TetR helicity may occur due to partial unfolding of the DNA recognition helix of the protein. The observed changes may play an important role in the process of induction in which tetracycline binding results in the loss of specific DNA binding.Abbreviations FQRS fluorescence-quenching-resolved spectra - HTH helix-turn-helix motif - tc tetracycline - TetR tetracycline repressor from Escherichia coli - TetR WT wild-type TetR - TetR W43 single point mutant with phenylalanine substituted for tryptophan at position 75 in both subunits     

Dynamics of repressor-operator recognition: the Tn10-encoded tetracycline resistance control

Binding of the Tet repressor to nonspecific and specific DNA leads to quenching of the Tet fluorescence by approximately 22% and approximately 35%, respectively. This effect is used for a direct, quantitative characterization of the binding equilibria and dynamics involved in the recognition of the operator by its repressor. From the dependence of the nonspecific binding constant on the ion concentration, it is concluded that nonspecific binding is almost completely driven by the entropy change resulting from the release of three to four Na+ ions from the double helix upon protein binding. Formation of the specific complex is driven by a higher entropy term resulting from the release of seven to eight Na+ ions and in addition by a free energy term of -33 kJ/mol from nonelectrostatic interactions, which are attributed to the specific contacts. The dynamics of the repressor-operator recognition are resolved by stopped-flow measurements at various salt concentrations and for different DNA chain lengths into two separate steps. The first step follows a second-order mechanism and results in an intermediate complex associated with formation of about three to four electrostatic contacts between protein and DNA; apparently, this complex is equivalent to the nonspecific complex. The existence of an intermediate is also indicated by experiments in mixed Na+-Mg2+ buffers, which can be described with high accuracy by competition of Mg2+ and protein. The intermediate complex is formed at a rate of 3 X 10(8) M-1 s-1 and is converted in the second reaction step to the specific complex with a rate constant of 6 X 10(4) s-1, which is almost independent of the salt concentration. Our interpretation and the parameters obtained from our model are confirmed by competition of nonspecific DNA with operator DNA for repressor binding. The observed maximal rate constant of 3 X 10(8) M-1 s-1 is very close to theoretical predictions for the association without a sliding mechanism. The very small dependence of the observed rate constants on the chain length shows that the Tet repressor is not able to slide over any substantial distance even at low salt concentrations. The question of a potential contribution from sliding under our experimental conditions is critically discussed. The absence of sliding in the case of the Tet repressor under physiological conditions is compared with the high sliding efficiency of the lac repressor and is discussed with respect to possible molecular mechanisms of sliding in relation to biological function.     

Tryptophan in alpha-helix 3 of Tet repressor forms a sequence-specific contact with tet operator in solution

The Tn10-encoded Tet repressor contains two tryptophan residues at positions 43 and 75. The typical tryptophan fluorescence is decreased upon binding of tet operator. The Tet repressor gene was engineered to replace either or both of the Trp codons by Phe codons. The resulting single tryptophan mutants are called F43 and F75 and the double mutant F43F75. The mutant proteins were purified to homogeneity. They recognize tet operator DNA only in the absence of the inducer tetracycline, indicating an intact tertiary structure of the engineered proteins. F75 and wild-type bind tet operator with the same association constant. The association constants of F43 and F43F75 with tet operator are about 3 orders of magnitude smaller. This indicates that Trp43 is important for tet operator recognition. Trp43 fluorescence is completely quenched in the complex with tet operator DNA while Trp75 remains unaffected. Binding to nonspecific DNA leads only to a 40% decrease of Trp43 fluorescence. This is interpreted as the contribution of the changed environment while the complete quench reflects a tight sequence-specific contact of tryptophan 43 to tet operator DNA. Trp43 is solvent-exposed, while Trp75 is buried in the hydrophobic interior of the protein. These results are discussed in light of the alpha-helix turn-alpha-helix DNA binding motif deduced from homology to other repressor proteins.     

Kinetics and mechanism in the reaction of gene regulatory proteins with DNA

We have measured the kinetic properties of the Escherichia coli cAMP receptor protein (CAP) and lac repressor interacting with lac promoter restriction fragments. Under our reaction conditions (10 mM-Tris X HCl (pH 8.0 at 21 degrees C), 1 mM-EDTA, 10 microM-cAMP, 50 micrograms bovine serum albumin/ml, 5% glycerol), the association of CAP is at least a two-step process, with an initial, unstable complex formed with rate constant kappa a = 5(+/- 2.5) X 10(7) M-1 s-1. Subsequent formation of a stable complex occurs with an apparent bimolecular rate constant kappa a = 6.7 X 10(6) M-1 s-1. At low total DNA concentration, the dissociation rate constant for the specific CAP-DNA complex is 1.2 X 10(-4) s-1. The ratio of formation and dissociation rate constants yields an estimate of the equilibrium constant, Keq = 5 X 10(10) M-1, in good agreement with static results. We observed that the dissociation rate constant of both CAP-DNA and repressor-DNA complexes is increased by adding non-specific "catalytic" DNA to the reaction mixture. CAP dissociation by the concentration-dependent pathway is second-order in added non-specific DNA, consistent with either the simultaneous or the sequential participation of two DNA molecules in the reaction mechanism. The results imply a role for distal DNA in assembly-disassembly of specific CAP-DNA complexes, and are consistent with a model in which the subunits in the CAP dimer separate in the assembly-disassembly process. The dissociation of lac repressor-operator complexes was found to be DNA concentration-dependent as well, although in contrast to CAP, the reaction is first-order in catalytic DNA. Added excess operator-rich DNA gave more rapid dissociation than equivalent concentrations of non-specific DNA, indicating that the sequence content of the competing DNA influences the rate of repressor dissociation. The simplest interpretation of these observations is that lac repressor can be transferred directly from one DNA molecule to another. A comparison of the translocation rates calculated for direct transfer with those predicted by the one-dimensional sliding model indicates that direct transfer may play a role in the binding site search of lac repressor.     

Nucleotide sequence of the gene, protein purification and characterization of the pSC101-encoded tetracycline resistance-gene-repressor

The nucleotide sequence of the pSC101-encoded tetracycline repressor gene (tetR) was confirmed. The deduced amino acid sequence is compared to that of other repressor proteins. To overproduce the repressor protein, tetR was placed under the control of bacteriophage lambda promoter pL. Tet repressor protein was purified to homogeneity and shown to bind specifically to two tet operators and also to tetracycline (Tc). The inducer function of Tc is demonstrated by the loss of the specific binding between the tet operator DNA and the Tet repressor-Tc complex.     

A fluorescence study of Tn10-encoded Tet repressor

Steady-state fluorescence quenching and time-resolved measurements have been performed to resolve the fluorescence contributions of the two tryptophan residues, W43 and W75, in the subunit of the homodimer of the Tet repressor fromEscherichia coli. The W43 residue is localized within the helix-turn-helix structural domain, which is responsible for sequence-specific binding of the Tet repressor to thetet operator. The W75 residue is in the protein matrix near the tetracycline-binding site. The assignment of the two residues has been confirmed by use of single-tryptophan mutants carrying either W43 or W75. The FQRS (fluorescence-quenching-resolved-spectra) method has been used to decompose the total emission spectrum of the wild-type protein into spectral components. The resolved spectra have maxima of fluorescence at 349 and 324 nm for the W43 and W75 residues, respectively. The maxima of the resolved spectra are in excellent agreement with those found using single-tryptophan-containing mutants. The fluorescence decay properties of the wild type as well as of both mutants of Tet repressor have been characterized by carrying out a multitemperature study. The decays of the wild-type Tet repressor and W43-containing mutant can be described as being of double-exponential type. The W75 mutant decay can be described by a Gaussian continuous distribution centered at 5.0 nsec with a bandwidth equal to 1.34 nsec. The quenching experiments have shown the presence of two classes of W43 emission. One of the components, exposed to solvent, has a maximum of fluorescence emission at 355 nm, with the second one at about 334 nm. The red-emitting component can be characterized by bimolecular-quenching rate constant,k _q equal to 2.6×10⁹, 2.8×10⁹, and 2.0×10⁹ M^–1 sec^–1 for acrylamide, iodide, and succinimide, respectively. The bluer component is unquenchable by any of the quenchers used. The W75 residue of the Tet repressor has quenching rate constant equal to 0.85×10⁹ and 0.28 × 10⁹ M^–1 sec^–1 for acrylamide and succinimide, respectively. These values indicate that the W75 is not deeply buried within the protein matrix. Our results indicate that the Tet repressor can exist in its ground state in two distinct conformational states which differ in the microenvironment of the W43 residue.Abbreviations FQRS fluorescence-quenching-resolved spectra - HTH helix-turn-helix motif - TetR tetracycline repressor fromE. coli - WT wild-type TetR - W43 single point mutant with phenyloalanine substituted for tryptophan at position 75 in both subunits - W75 single point mutant with phenyloalanine substituted for tryptophan at position 43 in both subunits     

Spectroscopic and kinetic properties of an oxygen-binding heme protein from Chromatium vinosum

Resonance Raman and electron paramagnetic resonance spectroscopy have been utilized to identify histidine as an axial heme ligand in a high spin, heme c-containing protein isolated from the photosynthetic purple sulfur bacterium Chromatium vinosum. Resonance Raman spectroscopy has also been used to characterize the CO adduct of the C. vinosum hemoprotein. Resonance Raman spectra of the heme site obtained within 10 ns of CO photolysis from the ferrous hemoprotein are virtually identical to those of the unligated protein, indicating that there is little or no rearrangement of the heme pocket in response to ligand photolysis. The equilibrium constant for CO binding to the ferrous hemeprotein was measured to be 1.7 X 10(-5) M-1 and the CO association rate constant determined to be 5.4 X 10(3) M-1 S-1. The quantum efficiency for photodissociation of the hemoprotein X CO complex was greater than or equal to 0.9.     

Thermal denaturation of engineered tet repressor proteins and their complexes with tet operator and tetracycline studied by temperature gradient gel electrophoresis

The effects of Trp to Phe exchanges in the Tet repressor on the thermal stability of the proteins and their complexes with operator DNA and inducer have been studied by temperature gradient polyacrylamide gel electrophoresis. The denaturation temperatures obtained by this method are compared with the results from temperature-dependent fluorescence and binding activities of the proteins. It is established that exchanging the interior Trp75 to Phe reduces the thermal stability of the Tet repressor by 8 degrees C while exchanging the exterior Trp43 to Phe has no effect on the stability of the protein. Binding of the inducer tetracycline increases the thermal stability of wild-type and Trp43 to Phe mutant Tet repressors by 5 degrees C, while the ones with the Trp75 to Phe mutation are stabilized by 10 degrees C. The stabilizing effect of operator binding is 20 degrees C in the Trp75 to Phe mutant and only 9 degrees C in the ones with the Trp43 to Phe exchange. In addition to the denaturation temperatures, the gel mobility shifts observed in temperature gradient gel electrophoresis reveal also information about the intermediates of the denaturation reaction. The free proteins and their complexes with the inducer tetracycline exhibit monophasic transitions upon denaturation. The operator complexes of wild-type and Trp75 to Phe mutant repressors denature in more complex reactions. At low temperature they exhibit a stoichiometry of two repressor dimers per tandem tet operator DNA. Upon elevating the temperature they form complexes with only one repressor dimer per DNA fragment. When the temperature is further increased the double-stranded DNA begins to melt from one end resulting in a complex with partially single-stranded DNA which exists only in a narrow temperature range. Finally, the denatured protein and single-stranded DNA are formed at high temperature. The associated mobility shifts are analyzed by changing the ionic strength and characterizing multiphasic melting of a pure DNA fragment by temperature gradient gel electrophoresis.     

A direct photo-activated affinity modification of tetracycline transcription repressor protein TetR(D) with tetracycline(1)

Results of a first successful application of a direct photo-induced affinity modification of Tet repressor (TetR(D)) protein with tetracycline within a complex of known three-dimensional structure are described. The conditions of the modification have provided suitable yields of the modified complex and allowed characterization of the modified segments of the protein. The potential of tetracycline as a fine modifying reagent was established. In the complex of TetR(D) protein with tetracycline, the antibiotic modifies at least two segments, Ile59-Glu73 and Ala173-Glu183, which form a binding tunnel for the drug according to the X-ray analysis. These data open possibilities for the use of different tetracycline targets for structural studies in solution.     

A fluorescence study of Tn10-encoded Tet repressor

Steady-state fluorescence quenching and time-resolved measurements have been performed to resolve the fluorescence contributions of the two tryptophan residues, W43 and W75, in the subunit of the homodimer of the Tet repressor fromEscherichia coli. The W43 residue is localized within the helix-turn-helix structural domain, which is responsible for sequence-specific binding of the Tet repressor to thetet operator. The W75 residue is in the protein matrix near the tetracycline-binding site. The assignment of the two residues has been confirmed by use of single-tryptophan mutants carrying either W43 or W75. The FQRS (fluorescence-quenching-resolved-spectra) method has been used to decompose the total emission spectrum of the wild-type protein into spectral components. The resolved spectra have maxima of fluorescence at 349 and 324 nm for the W43 and W75 residues, respectively. The maxima of the resolved spectra are in excellent agreement with those found using single-tryptophan-containing mutants. The fluorescence decay properties of the wild type as well as of both mutants of Tet repressor have been characterized by carrying out a multitemperature study. The decays of the wild-type Tet repressor and W43-containing mutant can be described as being of double-exponential type. The W75 mutant decay can be described by a Gaussian continuous distribution centered at 5.0 nsec with a bandwidth equal to 1.34 nsec. The quenching experiments have shown the presence of two classes of W43 emission. One of the components, exposed to solvent, has a maximum of fluorescence emission at 355 nm, with the second one at about 334 nm. The red-emitting component can be characterized by bimolecular-quenching rate constant,k _q equal to 2.6×10⁹, 2.8×10⁹, and 2.0×10⁹ M^?1 sec^?1 for acrylamide, iodide, and succinimide, respectively. The bluer component is unquenchable by any of the quenchers used. The W75 residue of the Tet repressor has quenching rate constant equal to 0.85×10⁹ and 0.28 × 10⁹ M^?1 sec^?1 for acrylamide and succinimide, respectively. These values indicate that the W75 is not deeply buried within the protein matrix. Our results indicate that the Tet repressor can exist in its ground state in two distinct conformational states which differ in the microenvironment of the W43 residue.     

Deuteroporphyrin-albumin binding equilibrium. The effects of porphyrin self-aggregation studied for the human and the bovine proteins.

The binding equilibrium of deuteroporphyrin IX to human serum albumin and to bovine serum albumin was studied, by monitoring protein-induced changes in the porphyrin fluorescence and taking into consideration the self-aggregation of the porphyrin. To have control over the latter, the range of porphyrin concentrations was chosen to maker dimers (non-covalent) the dominant aggregate. Each protein was found to have one high-affinity site for deuteroporphyrin IX monomers, the magnitudes of the equilibrium binding constants (25 degrees C, neutral pH, phosphate-buffered saline) being 4.5 (+/- 1.5) X 10(7) M-1 and 1.7 (+/- 0.2) X 10(6) M-1 for human serum albumin and for bovine serum albumin respectively. Deuteroporphyrin IX dimers were found to bind directly to the protein, each protein binding one dimer, with high affinity. Two models are proposed for the protein-binding of porphyrin monomers and dimers in a porphyrin system having both species: a competitive model, where each protein molecule has only one binding site, which can be occupied by either a monomer or a dimer; a non-competitive model, where each protein molecule has two binding sites, one for monomers and one for dimers. On testing the fit of the data to the models, an argument can be made to favour the non-competitive model, the equilibrium binding constants of the dimers, for the non-competitive model (25 degrees C, neutral pH, phosphate-buffered saline), being: 8.0 (+/- 1.8) X 10(8) M-1 and 1.2 (+/- 0.6) X 10(7) M-1 for human serum albumin and bovine serum albumin respectively.     

Structure of the Tet repressor and Tet repressor-operator complexes in solution from electrooptical measurements and hydrodynamic simulations

The Tet repressor protein and tet operator DNA fragments and their complexes have been analyzed by electrooptical procedures. The protein shows a positive linear dichroism at 280 nm, a negative linear dichroism at 248 nm, and a strong permanent dipole moment of 3.5 X 10(-27) C m, which is independent of the salt concentration within experimental accuracy. Its rotation time constant of 40 ns indicates an elongated structure, which is consistent with a prolate ellipsoid of 100 A for the long axis and 40 A for the short axis. The time constant can also be fitted by a cylinder of length 78 A and diameter 37 A, which is consistent with nuclease protection data reported on repressor-operator complexes, if the cylinder axis is aligned parallel to the DNA axis. Addition of tetracycline induces changes of the limit dichroism but very little change of the rotation time constant. The rotation time constants observed for the operator DNA fragments show some deviations from the values expected from their contour length; however, these deviations remain relatively small. Formation of repressor-operator complexes leads to some increase of the DNA rotation time constants. Simulations by bead models demonstrate that these time constants can be explained without any major change of the hydrodynamic dimension of the components. The data for the complexes are fitted by bead models with smooth bending of the DNA corresponding to a radius of curvature of 500 A, but at the given accuracy, we cannot rule out that the DNA in the complex remains straight or is bent to a smaller radius of approximately 400 A. Thus, binding of the Tet repressor, which is a helix-turn-helix protein as judged from its sequence, to its operator seems to induce minor bending but does not induce strong bending of the DNA double helix.     

The interaction of riboflavin with a protein isolated from hen's egg white: a spectrofluorimetric study.

The interaction of riboflavin with a protein isolated from egg white has been studied spectrofluorimetrically at different pH values. In 0.1 M phosphate buffer pH 7.0; 1:1 complex formation occurs with the association constant Ka = 7.7-10(7) M-1. In the presence of 0.033% sodium dodecyl sulphate, the complex dissociated with a rate constant of 4-10(-2) sec-1 at 29 degrees C. The binding was sensitive to pH and to the antibodies produced against the protein. On lowering the pH from 7 to 4 the binding affinity decreased approximately 100-fold and below pH 4, the binding could not be detected at all. These data, together with those obtained by measuring the fluorescence intensities of riboflavin in presence of N-bromosuccinimide oxidized- and disulphide reduced apoprotein, suggest that carboxyl functions, 1-2 tryptophan residues and 2-3 disulphide bridges are essential for binding. The emission spectra of the protein under different conditions upon excitation at 280 and 295 nm were analyzed to calculate the quantum yield (Q) and the efficiency of energy transfer (e) from tyrosine to tryptophan residues. From these data it was concluded that the energy transfer did not occur with equal efficiency under all conditions and that the tryptophan residues responsible for the riboflavin binding are more accessible to N-bromosuccinimide oxidation than others.     

Interaction of rat testis protein, TP, with nucleic acids in vitro. Fluorescence quenching, UV absorption, and thermal denaturation studies

The nucleic acid binding properties of the testis protein, TP, were studied with the help of physical techniques, namely, fluorescence quenching, UV difference absorption spectroscopy, and thermal melting. Results of quenching of tyrosine fluorescence of TP upon its binding to double-stranded and denatured rat liver nucleosome core DNA and poly(rA) suggest that the tyrosine residues of TP interact/intercalate with the bases of these nucleic acids. From the fluorescence quenching data, obtained at 50 mM NaCl concentration, the apparent association constants for binding of TP to native and denatured DNA and poly(rA) were calculated to be 4.4 X 10(3) M-1, 2.86 X 10(4) M-1, and 8.5 X 10(4) M-1, respectively. UV difference absorption spectra upon TP binding to poly(rA) and rat liver core DNA showed a TP-induced hyperchromicity at 260 nm which is suggestive of local melting of poly(rA) and DNA. The results from thermal melting studies of binding of TP to calf thymus DNA at 1 mM NaCl as well as 50 mM NaCl showed that although at 1 mM NaCl TP brings about a slight stabilization of the DNA against thermal melting, a destabilization of the DNA was observed at 50 mM NaCl. From these results it is concluded that TP, having a higher affinity for single-stranded nucleic acids, destabilizes double-stranded DNA, thus behaving like a DNA-melting protein.     

Photophysical analysis of class I major histocompatibility complex protein assembly using a xanthene-derivatized beta2-microglobulin

Spectral changes and a sixfold increase in the emission intensity were observed in the fluorescence of a single xanthene probe (Texas red) attached to beta2m-microglobulin (beta2m) upon assembly of beta2m into a ternary complex with mouse H-2Kd heavy chain and influenza nuclear protein peptide. Dissociation of the labeled beta2m from the ternary complex restored the probe's fluorescence and absorption spectra and reduced the emission intensity. Thus changes in xanthene probe fluorescence upon association/dissociation of the labeled beta2m molecule with/from the ternary complex provide a simple and convenient method for studying the assembly/dissociation mechanism of the class I major histocompatibility complex (MHC-I) encoded molecule. The photophysical changes in the probe can be accounted for by the oligomerization of free labeled beta2m molecules. The fluorescence at 610 nm is due to beta2m dimers, where the probes are significantly separated spatially so that their emission and excitation properties are close to those of xanthene monomers. Fluorescence around 630 nm is due to beta2m oligomers where xanthene probes interact. Minima in the steady-state excitation (550 nm) and emission (630 nm) anisotropy spectra correlate with the maxima of the high-order oligomer excitation and emission spectra, showing that their fluorescence is more depolarized. These photophysical features are explained by splitting of the first singlet excited state of interacting xanthene probes that can be modeled by exciton theory.     

Kinetics and mechanism of bilirubin binding to human serum albumin

The kinetics of bilirubin binding to human serum albumin at pH 7.40, 4 degrees C, was studied by monitoring changes in bilirubin absorbance. The time course of the absorbance change at 380 nm was complex: at least three kinetic events were detected including the bimolecular association (k1 = 3.8 +/- 2.0 X 10(7) M-1 S-1) and two relaxation steps (52 = 40.2 +/- 9.4 s-1 and k3 = 3.8 +/- 0.5 s-1). The presence of the two slow relaxations was confirmed under pseudo-first order conditions with excess albumin. Curve-fitting procedures allowed the assignment of absorption coefficients to the intermediate species. When the bilirubin-albumin binding kinetics was observed at 420 nm, only the two relaxations were seen; apparently the second order association step was isosbestic at this wavelength. The rate of albumin-bound bilirubin dissociation was measured by mixing the pre-equilibrated human albumin-bilirubin complex with bovine albumin. The rate constant for bilirubin dissociation measured at 485 nm was k-3 = 0.01 s-1 at 4 degrees C. A minimum value of the equilibrium constant for bilirubin binding to human albumin determined from the ratio k1/k-3 is therefore approximately 4 X 10(9) M-1.     

Computer simulations and experimental studies of gel mobility patterns for weak and strong non-cooperative protein binding to two targets on the same DNA: application to binding of tet repressor variants to multiple and single tet operator sites

A series of computer simulations of gel patterns assuming non-cooperative binding of a protein to two targets on the same DNA fragment was performed and applied to interprete gel mobility shift experiments of Tet repressor-tet operator binding. While a high binding affinity leads to the expected distribution of free DNA, DNA bound by one repressor dimer and DNA bound by two repressor dimers, a lower affinity or an increased electrophoresis time results in the loss of the band corresponding to the singly occupied complex. The doubly occupied complex remains stable under these conditions. This phenomenon is typical for protein binding to DNA fragments with two identical sites. It results from statistical disproportionation of the singly occupied complex in the gel. The lack of the singly occupied complex is commonly taken to indicate cooperative binding, however, our analysis shows clearly, that cooperativity is not needed to interprete these results. Tet repressor proteins and small DNA fragments with two tet operator sites have been prepared from four classes of tetracycline resistance determinants. The results of gel mobility shift analyses of various complexes of these compounds confirm the predictions. Furthermore, calculated gel patterns assuming different gel mobilities of the two singly occupied complexes show discrete bands only if the electrophoresis time is shorter than the inverse of the microscopic dissociation rate constant. Simulations assuming increasing dissociation rates predict that the two bands first merge into one, which then disappears. This behavior was verified by gel mobility analyses of Tet repressor-tet operator titrations at increased salt concentrations as well as by direct footprinting of the complexes in the gel. It is concluded that comparison of the intensities of the single and the double occupation bands allow a rough estimation of the dissociation rate constant. On this basis the sixteen possible Tet repressor-tet operator combinations can be ordered with decreasing binding affinities by a simple gel shift experiment. The implications of these results for gel mobility analyses of other protein-DNA complexes are discussed.