<Emphasis Type="Italic">Lactobacillus acidophilus</Emphasis> as a live vehicle for oral immunization against chicken anemia virus

The AcmA binding domains of Lactococcus lactis were used to display the VP1 protein of chicken anemia virus (CAV) on Lactobacillus acidophilus. One and two repeats of the cell wall binding domain of acmA gene were amplified from L. lactis MG1363 genome and then inserted into co-expression vector, pBudCE4.1. The VP1 gene of CAV was then fused to the acmA sequences and the VP2 gene was cloned into the second MCS of the same vector before transformation into Escherichia coli. The expressed recombinant proteins were purified using a His-tag affinity column and mixed with a culture of L. acidophilus. Whole cell ELISA and immunofluorescence assay showed the binding of the recombinant VP1 protein on the surface of the bacterial cells. The lactobacilli cells carrying the CAV VP1 protein were used to immunize specific pathogen-free chickens through the oral route. A moderate level of neutralizing antibody to CAV was detected in the serum of the immunized chickens. A VP1-specific proliferative response was observed in splenocytes of the chickens after oral immunization. The vaccinated groups also showed increased levels of Th1 cytokines interleukin (IL)-2, IL-12, and IFN-γ. These observations suggest that L. acidophilus can be used in the delivery of vaccines to chickens.     

Requirement of Autolytic Activity for Bacteriocin-Induced Lysis

The bacteriocin produced by Lactococcus lactis IFPL105 is bactericidal against several Lactococcus and Lactobacillus strains. Addition of the bacteriocin to exponential-growth-phase cells resulted in all cases in bacteriolysis. The bacteriolytic response of the strains was not related to differences in sensitivity to the bacteriocin and was strongly reduced in the presence of autolysin inhibitors (Co²⁺ and sodium dodecyl sulfate). When L. lactis MG1363 and its derivative deficient in the production of the major autolysin AcmA (MG1363acmAΔ1) were incubated with the bacteriocin, the latter did not lyse and no intracellular proteins were released into the medium. Incubation of cell wall fragments of L. lactis MG1363, or of L. lactis MG1363acmAΔ1 to which extracellular AcmA was added, in the presence or absence of the bacteriocin had no effect on the speed of cell wall degradation. This result indicates that the bacteriocin does not degrade cell walls, nor does it directly activate the autolysin AcmA. The autolysin was also responsible for the observed lysis of L. lactis MG1363 cells during incubation with nisin or the mixture of lactococcins A, B, and M. The results presented here show that lysis of L. lactis after addition of the bacteriocins is caused by the resulting cell damage, which promotes uncontrolled degradation of the cell walls by AcmA.     

Reduced Lysis upon Growth of Lactococcus lactis on Galactose Is a Consequence of Decreased Binding of the Autolysin AcmA

When Lactococcus lactis subsp. lactis IL1403 or L. lactis subsp. cremoris MG1363 is grown in a medium with galactose as the carbon source, the culture lyses to a lesser extent in stationary phase than when the bacteria are grown in a medium containing glucose. Expression of AcmA, the major autolysin of L. lactis, is not influenced by the carbon source. Binding studies with a fusion protein consisting of the MSA2 protein of Plasmodium falciparum and the C-terminal peptidoglycan-binding domain of AcmA revealed that cell walls of cells from both subspecies grown on galactose bind less AcmA than cell walls of cells grown on glucose. Cells grown on glucose or galactose and treated with trichloroacetic acid prior to AcmA binding bind similar amounts of AcmA. Analysis of the composition of the lipoteichoic acids (LTAs) of L. lactis IL1403 cells grown on glucose or galactose showed that the LTA composition is influenced by the carbon source: cells grown on galactose contain LTA with less galactose than cells grown on glucose. In conclusion, growth of L. lactis on galactose changes the LTA composition in the cell wall in such a way that less AcmA is able to bind to the peptidoglycan, resulting in a decrease in autolysis.     

Immobilization of Lactococcus lactis to cellulosic material by cellulose‐binding domain of Cellvibrio japonicus

Aims: Immobilization of whole cells can be used to accumulate cells in a bioreactor and thus increase the cell density and potentially productivity, also. Cellulose is an excellent matrix for immobilization purposes because it does not require chemical modifications and is commercially available in many different forms at low price. The aim of this study was to construct a Lactococcus lactis strain capable of immobilizing to a cellulosic matrix. Methods and Results: In this study, the Usp45 signal sequence fused with the cellulose‐binding domain (CBD) (112 amino acids) of XylA enzyme from Cellvibrio japonicus was fused with PrtP or AcmA anchors derived from L. lactis. A successful surface display of L. lactis cells expressing these fusion proteins under the P45 promoter was achieved and detected by whole‐cell ELISA. A rapid filter paper assay was developed to study the cellulose‐binding capability of these recombinant strains. As a result, an efficient immobilization to filter paper was demonstrated for the L. lactis cells expressing the CBD‐fusion protein. The highest immobilization (92%) was measured for the strain expressing the CBD in fusion with the 344 amino acid PrtP anchor. Conclusions: The result from the binding tests indicated that a new phenotype for L. lactis with cellulose‐binding capability was achieved with both PrtP (LPXTG type anchor) and AcmA (LysM type anchor) fusions with CBD. Significance and Impact of the Study: We demonstrated that an efficient immobilization of recombinant L. lactis cells to cellulosic matrix is possible. This is a step forward in developing efficient immobilization systems for lactococcal strains for industrial‐scale fermentations.     

Receptor Binding Domain of Escherichia coli F18 Fimbrial Adhesin FedF Can Be both Efficiently Secreted and Surface Displayed in a Functional Form in Lactococcus lactis

Adherence of F18 fimbrial Escherichia coli to porcine intestinal epithelial cells is mediated by the adhesin (FedF) of F18 fimbriae. In a previous study, we demonstrated the specificity of the amino acid residues between 60 and 109 as the receptor binding domain of FedF. In this study, different expression, secretion, and anchoring systems for the receptor binding domain of the FedF adhesin in Lactococcus lactis were evaluated. Two partially overlapping receptor binding domains (42 and 62 amino acid residues) were expressed as fusions with L. lactis subsp. cremoris protein PrtP for evaluation of secretion efficiency. To evaluate the cell surface display of these FedF-PrtP fusions, they were further combined with different lengths of PrtP spacers fused with either the L. lactis AcmA anchor or the PrtP cell wall binding domain. An HtrA-defective L. lactis NZ9000 mutant was constructed to determine its effect on the level of secreted or anchored fusion proteins. Recombinant L. lactis clones secreting the receptor binding domain of F18 fimbriae as a fusion with the H domains of L. lactis protein PrtP were first constructed by using two different signal peptides. FedF-PrtP fusions, directed by the signal sequence of L. brevis SlpA, were throughout found to be secreted at significantly higher quantities than corresponding fusions with the signal peptide of L. lactis Usp45. In the surface display systems tested, the L. lactis AcmA anchor performed significantly better, particularly in the L. lactis NZ9000ΔhtrA strain, compared to the L. lactis PrtP anchor region. Of the cell surface display constructs with the AcmA anchor, only those with the longest PrtP spacer regions resulted in efficient binding of recombinant L. lactis cells to porcine intestinal epithelial cells. These results confirmed that it is possible to efficiently produce the receptor binding domain of the F18 adhesin in a functionally active form in L. lactis.     

Insertion of single‐chain variable fragment (scFv) peptide linker improves surface display of influenza hemagglutinin (HA1) on non‐recombinant Lactococcus lactis

Heterologous protein displayed on the surface of Lactococcus lactis using the binding domain of N‐acetylmuramidase (AcmA) has a potential application in vaccine delivery. In this study, we developed a non‐recombinant L. lactis surface displaying the influenza A (H1N1) 2009 hemagglutinin (HA1). Three recombinant proteins, HA1/L/AcmA, HA1/AcmA, and HA1 were overexpressed in Escherichia coli, and purified. In the binding study using flow cytometry, the HA1/L/AcmA, which contained the single‐chain variable fragment (scFv) peptide linker showed significantly higher percentage of binding counts and mean fluorescence binding intensity (MFI) (51.7 ± 1.4% and 3,594.0 ± 675.9, respectively) in comparison to the HA1/AcmA without the scFv peptide linker (41.1 ± 1.5% and 1,652.0 ± 34.1, respectively). Higher amount of HA1/L/AcmA (～2.9 × 10⁴ molecules per cell) was displayed on L. lactis when compared to HA1/AcmA (～1.1 × 10⁴ molecules per cell) in the immunoblotting analysis. The HA1/L/AcmA completely agglutinated RBCs at comparable amount of protein to that of HA1/AcmA and HA1. Computational modeling of protein structures suggested that scFv peptide linker in HA1/L/AcmA kept the HA1 and the AcmA domain separated at a much longer distance in comparison to HA1/AcmA. These findings suggest that insertion of the scFv peptide linker between HA1 and AcmA improved binding of recombinant proteins to L. lactis. Hence, insertion of scFv peptide linker can be further investigated as a potential approach for improvement of heterologous proteins displayed on the surface of L. lactis using the AcmA binding domain. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:154–162, 2017     

Surface display of respiratory syncytial virus glycoproteins in Lactococcus lactis NZ9000

Aims: A system for displaying heterologous respiratory syncytial virus (RSV) glycoproteins on the surface of Lactococcus lactis NZ9000 was developed. Methods and Results: Fusion of the USP45 signal peptide and the cA (C terminus of the peptidoglycan‐binding) domains of AcmA, a major autolysin from L. lactis, to the N‐ and C‐terminal of the target proteins, respectively, was carried out. The target protein was the major immunogenic domain of either the F (40·17‐kDa) or G (11·49‐kDa) glycoprotein domains of the RSV. Whole‐cell ELISA readings obtained after 24 h of induction showed an increase in protein expression as the cA domain repeats increased, for the G glycoprotein of RSV. On the other hand, the F glycoprotein indicated decreasing expression levels as the number of cA domain repeats increased. The difference in the expression levels of the F and G domains may be attributed to the different sizes of the antigenic domains. Conclusions: The size and properties of the target proteins are vital in determining the amount of antigenic domains being displayed on the surface of live cells. Significance and Impact of the Study: The system demonstrated here can aid in the utilization of the generally regarded as safe (GRAS) bacteria L. lactis, as a vaccine delivery vehicle to surface display the antigenic proteins of RSV.     

Display of VP1 on the surface of baculovirus and its immunogenicity against heterologous human enterovirus 71 strains in mice

Background

Human Enterovirus 71 (EV71) is a common cause of hand, foot and mouth disease (HFMD) in young children. It is often associated with severe neurological diseases and has caused high mortalities in recent outbreaks across the Asia Pacific region. Currently, there is no effective vaccine and antiviral agents available against EV71 infections. VP1 is one of the major immunogenic capsid protein of EV71 and plays a crucial role in viral infection. Antibodies against VP1 are important for virus neutralization.

Methodology/Principal Finding

In the present study, infectious EV71 viruses were generated from their synthetic complementary DNA using the human RNA polymerase I reverse genetics system. Secondly, the major immunogenic capsid protein (VP1) of EV71-Fuyang (subgenogroup C4) was displayed on the surface of recombinant baculovirus Bac-Pie1-gp64-VP1 as gp64 fusion protein under a novel White Spot Syndrome Virus (WSSV) immediate early ie1 promoter. Baculovirus expressed VP1 was able to maintain its structural and antigenic conformity as indicated by immunofluorescence assay and western blot analysis. Interestingly, our results with confocal microscopy revealed that VP1 was able to localize on the plasma membrane of insect cells infected with recombinant baculovirus. In addition, we demonstrated with transmission electron microscopy that baculovirus successfully acquired VP1 from the insect cell membrane via the budding process. After two immunizations in mice, Bac-Pie1-gp64-VP1 elicited neutralization antibody titer of 1∶64 against EV71 (subgenogroup C4) in an in vitro neutralization assay. Furthermore, the antisera showed high cross-neutralization activities against all 11 subgenogroup EV71 strains.

Conclusion

Our results illustrated that Bac-Pie1-gp64-VP1 retained native epitopes of VP1 and acted as an effective EV71 vaccine candidate which would enable rapid production without any biosafety concerns.     

AcmD,a Homolog of the Major Autolysin AcmA of Lactococcus lactis,Binds to the Cell Wall and Contributes to Cell Separation and Autolysis

Lactococcus lactis expresses the homologous glucosaminidases AcmB, AcmC, AcmA and AcmD. The latter two have three C-terminal LysM repeats for peptidoglycan binding. AcmD has much shorter intervening sequences separating the LysM repeats and a lower iso-electric point (4.3) than AcmA (10.3). Under standard laboratory conditions AcmD was mainly secreted into the culture supernatant. An L. lactis acmAacmD double mutant formed longer chains than the acmA single mutant, indicating that AcmD contributes to cell separation. This phenotype could be complemented by plasmid-encoded expression of AcmD in the double mutant. No clear difference in cellular lysis and protein secretion was observed between both mutants. Nevertheless, overexpression of AcmD resulted in increased autolysis when AcmA was present (as in the wild type strain) or when AcmA was added to the culture medium of an AcmA-minus strain. Possibly, AcmD is mainly active within the cell wall, at places where proper conditions are present for its binding and catalytic activity. Various fusion proteins carrying either the three LysM repeats of AcmA or AcmD were used to study and compare their cell wall binding characteristics. Whereas binding of the LysM domain of AcmA took place at pHs ranging from 4 to 8, LysM domain of AcmD seems to bind strongest at pH 4.     

Autolysis of Lactococcus lactis Is Influenced by Proteolysis

The autolysin AcmA of Lactococcus lactis was shown to be degraded by the extracellular lactococcal proteinase PrtP. Autolysis, as evidenced by reduction in optical density of a stationary-phase culture and concomitant release of intracellular proteins, was greatly reduced when L. lactis MG1363 cells expressed the cell wall-anchored lactococcal proteinase PrtP of the PI-type caseinolytic specificity (PI). On the other hand, lactococcal strains that did not produce the proteinase showed a high level of autolysis, which was also observed when the cells produced the secreted form of PI or a cell wall-anchored proteinase with PIII-type specificity. Autolysis was also increased when MG1363 expressed the cell wall-anchored hybrid PI/PIII-type proteinase PIac. Zymographic analysis of AcmA activity during stationary phase showed that AcmA was quickly degraded by PI and much more slowly by PrtP proteinases with PIII-type and intermediate specificities. Autolysis of L. lactis by AcmA was influenced by the specificity, amount, and location of the lactococcal proteinase. No autolysis was observed when the various proteinases were expressed in an L. lactis acmA deletion mutant, indicating that PrtP itself did not cause lysis of cells. The chain length of a strain was significantly shortened when the strain expressed a cell wall-anchored active proteinase.     

Antisense RNA directed against the major capsid protein of Lactococcus lactis subsp. cremoris bacteriophage 4-1 confers partial resistance to the host

Summary Antisense RNA targeted against the major capsid protein (MCP) of Lactococcus lactis subsp. cremoris bacteriophage F4-1 reduced bacteriophage replication by up to 50%. The region containing the mcp gene was oriented to transcribe the antisense strand using a L. lactis subsp. cremoris Wg2 promoter. The size of the mcp insert transcribed affected the level of bacteriophage inhibition and the greatest level of inhibition was achieved using a 301-bp fragment from the 5 end of the mcp. Antisense mcp RNA constructs were stable and did not alter the endogenous plasmid profile in the host, L. lactis subsp. cremoris F4-1. There were, however, some adverse effects on the host during the stationary phase as exhibited by a decline in cell density. Offprint requests to: C. A. Batt     

Immobilization of nisin producer Lactococcus lactis strains to chitin with surface-displayed chitin-binding domain

In this study, nisin producer Lactococcus lactis strains displaying cell surface chitin-binding domain (ChBD) and capable of immobilizing to chitin flakes were constructed. To obtain ChBD-based cell immobilization, Usp45 signal sequence with ChBD of chitinase A1 enzyme from Bacillus circulans was fused with different lengths of PrtP (153, 344, and 800 aa) or AcmA (242 aa) anchors derived from L. lactis. According to the whole cell ELISA analysis, ChBD was successfully expressed on the surface of L. lactis cells. Scanning electron microscope observations supported the conclusion of the binding analysis that L. lactis cells expressing the ChBD with long PrtP anchor (800 aa) did bind to chitin surfaces more efficiently than cells with the other ChBD anchors. The attained binding affinity of nisin producers for chitin flakes retained them in the fermentation during medium changes and enabled storage for sequential productions. Initial nisin production was stably maintained with many cycles. These results demonstrate that an efficient immobilization of L. lactis cells to chitin is possible for industrial scale repeated cycle or continuous nisin fermentation.     

Streamlined design of a self-inactivating feline immunodeficiency virus vector for transducing ex vivo dendritic cells and T lymphocytes

Background

Enterovirus 71 (EV71) is a major causative viral agent responsible for large outbreaks of hand, foot and mouth disease (HFMD), a common rash illness in children and infants. There is no effective antiviral treatment for severe EV71 infections and no vaccine is available. The objectives of this study were to design and construct a DNA vaccine against Enterovirus 71 using the viral capsid protein (VP1) gene of EV71 and to verify the functionality of the DNA vaccine in vitro and in vivo.

Methods

The VP1 gene of EV71 from two local outbreak isolates were amplified using PCR and then inserted into a eukaryotic expression vector, pVAX1. The 3.9 kb recombinant constructs were transformed into competent E. coli cells and the positive clones were screened and selected using PCR analysis, restriction digestion analysis and DNA sequencing. The constructs were then tested for protein expression in Vero cells. Subsequently, in the in vivo studies, female Balb/c mice were immunized with the DNA vaccine constructs. Enzyme Linked Immunosorbent Assay (ELISA) and virus neutralizing assay were performed to detect the presence of anti-VP1 IgG in mice and its neutralizing effect against the EV71.

Results

The pVAX1 vector was successfully cloned with the VP1 gene from each of the isolate (S2/86/1 and 410/4) in the correct orientation and in-frame. The DNA vaccine constructs with the VP1 gene were shown to be expressed in a cell-free in vitro expression system. The VP1 protein was successfully expressed in the mammalian cell line and was detected using RT-PCR, Indirect Immunofluorescence Assay (IFA) and western blotting. The anti-VP1 IgG levels in mice immunized with the DNA vaccine constructs increased after the first booster but declined following the second booster. The anti-VP1 IgG in the mice immunized with the DNA vaccine constructs exhibited neutralising activity against EV71.

Conclusion

The promising results obtained in the present study have prompted further testing to improve the expression and immunogenicity of this potential EV71 DNA vaccine.     

Expression of prophage-encoded endolysins contributes to autolysis of Lactococcus lactis

Analysis of autolysis of derivatives of Lactococcus lactis subsp. cremoris MG1363 and subsp. lactis IL1403, both lacking the major autolysin AcmA, showed that L. lactis IL1403 still lysed during growth while L. lactis MG1363 did not. Zymographic analysis revealed that a peptidoglycan hydrolase activity of around 30 kDa is present in cell extracts of L. lactis IL1403 that could not be detected in strain MG1363. A comparison of all genes encoding putative peptidoglycan hydrolases of IL1403 and MG1363 led to the assumption that one or more of the 99 % homologous 27.9-kDa endolysins encoded by the prophages bIL285, bIL286 and bIL309 could account for the autolysis phenotype of IL1403. Induced expression of the endolysins from bIL285, bIL286 or bIL309 in L. lactis MG1363 resulted in detectable lysis or lytic activity. Prophage deletion and insertion derivatives of L. lactis IL1403 had a reduced cell lysis phenotype. RT-qPCR and zymogram analysis showed that each of these strains still expressed one or more of the three phage lysins. A homologous gene and an endolysin activity were also identified in the natural starter culture L. lactis subsp. cremoris strains E8, Wg2 and HP, and the lytic activity could be detected under growth conditions that were identical as those used for IL1403. The results presented here show that these endolysins of L. lactis are expressed during normal growth and contribute to autolysis without production of (lytic) phages. Screening for natural strains expressing homologous endolysins could help in the selection of strains with enhanced autolysis and, thus, cheese ripening properties.

     

Cytoplasmic expression of a thermostable invertase from <Emphasis Type="Italic">Thermotoga maritima</Emphasis> in <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

Objectives

To evaluate the secretory and cytoplasmic expression of a thermostable Thermogata maritima invertase in Lactococcus lactis.

Results

The thermostable invertase from T. maritima was cloned with and without the USP45 secretory peptide into the pNZ8148 vector for nisin-inducible expression in L. lactis. The introduction of an USP45 secretion peptide at the N-terminal of the enzyme led to a loss of protein solubility. Computational homology modeling and hydrophobicity studies indicated that the USP45 peptide exposes a stretch of hydrophobic amino acids on the protein surface resulting in lower solubility. Removal of the USP45 secretion peptide allowed a soluble and functional invertase to be expressed intracellularly in L. lactis. Immobilized metal affinity chromatography purification of the cell lysate with nickel-NTA gave a single protein band on SDS-PAGE, while E. coli-expressed invertase consistently co-purified with an additional band. The yields of the purified invertase from E. coli and L. lactis were 14.1 and 6.3 mg/l respectively.

Conclusions

Invertase can be expressed in L. lactis and purified in a functional form. L. lactis is a suitable host for the production of food-grade invertase for use in the food and biotechnology industries.

     

Display of heterologous proteins on the surface of Lactococcus lactis using the H and W domain of PrtB from Lactobacillus delburueckii subsp. bulgaricus as an anchoring matrix

Aims: The aim of this study was to develop a cell‐surface display system for foreign antigens on the surface of a Lactococcus lactis strain using an H and W domain of PrtB from Lactobacillus delburueckii subsp. bulgaricus as an anchoring matrix. Methods and Results: To construct a cell‐surface display pACL1 vector, a derivative of pSECE1 vector, we amplified the H and W domain of the cell‐surface proteinase Prt B from Lact. bulgaricus using specific primers and then cloned it into a site downstream of the secretion signal sequence in the pSECE1 vector. The new system, designed for cell‐surface display of recombinant proteins on L. lactis, was evaluated by the expression and display of the FliC protein of Salmonella enterica serovar Enteritidis as a reporter gene (pALC1:FliC). The expression of the FliC protein by the transformed cells was analysed by Western blot analysis, and the localization of FliC on the cell surface was confirmed by immunofluorescence microscopy and flow cytometry analysis. A specific band corresponding in size (approx. 110 kDa) to FliC plus the anchor residues was detected by anti‐FliC antibody in the cell extract of L. lactis H61 harbouring pALC1:FliC, but not L. lactis H61 harbouring pALC1. In addition, flow cytometry and immunofluorescence microscopy revealed FliC‐specific positive signals and a significant increase of fluorescence, respectively, in cells harbouring pALC1:FliC compared with that in control cells harbouring the parental pALC1 plasmid. These findings demonstrated that FliC was successfully displayed on the cell surface by the anchor domain of PrtB. Conclusions: A pALC1 vector using the H and W domain of PrtB from Lact. bulgaricus as an anchoring matrix can be used to successfully display the FliC protein on the surface of L. lactis. Significance and Impact of the Study: This novel way of displaying heterologous proteins on the cell surface of L. lactis using the PrtB anchor domain should prove useful for the delivery of antigens and other proteins.     

System Using Tandem Repeats of the cA Peptidoglycan-Binding Domain from Lactococcus lactis for Display of both N- and C-Terminal Fusions on Cell Surfaces of Lactic Acid Bacteria

Here, we established a system for displaying heterologous protein to the C terminus of the peptidoglycan-binding domain (cA domain) of AcmA (a major autolysin from Lactococcus lactis). Western blot and flow cytometric analyses revealed that the fusion proteins (cA-AmyA) of the cA domain and α-amylase from Streptococcus bovis 148 (AmyA) are efficiently expressed and successfully displayed on the surfaces of L. lactis cells. AmyA was also displayed on the cell surface while retaining its activity. Moreover, with an increase in the number of cA domains, the quantity of cA-AmyA fusion proteins displayed on the cell surface increased. When three repeats of the cA domain were used as an anchor protein, 82% of α-amylase activity was detected on the cells. The raw starch-degrading activity of AmyA was significantly higher when AmyA was fused to the C terminus of the cA domain than when it was fused to the N terminus. In addition, cA-AmyA fusion proteins were successfully displayed on the cell surfaces of Lactobacillus plantarum and Lactobacillus casei.     

Characterization of a Novel LysM Domain from Lactobacillus fermentum Bacteriophage Endolysin and Its Use as an Anchor To Display Heterologous Proteins on the Surfaces of Lactic Acid Bacteria

The endolysin Lyb5, from Lactobacillus fermentum temperate bacteriophage φPYB5, showed a broad lytic spectrum against Gram-positive as well as Gram-negative bacteria. Sequence analysis revealed that the C terminus of the endolysin Lyb5 (Ly5C) contained three putative lysin motif (LysM) repeat regions, implying that Ly5C was involved in bacterial cell wall binding. To investigate the potential of Ly5C for surface display, green fluorescent protein (GFP) was fused to Ly5C at its N or C terminus and the resulting fusion proteins were expressed in Escherichia coli. After being mixed with various cells in vitro, GFP was successfully displayed on the surfaces of Lactococcus lactis, Lactobacillus casei, Lb. brevis, Lb. plantarum, Lb. fermentum, Lb. delbrueckii, Lb. helveticus, and Streptococcus thermophilus cells. Increases in the fluorescence intensities of chemically pretreated L. lactis and Lb. casei cells compared to those of nonpretreated cells suggested that the peptidoglycan was the binding ligand for Ly5C. Moreover, the pH and concentration of sodium chloride were optimized to enhance the binding capacity of GFP-Ly5C, and high-intensity fluorescence of cells was observed under optimal conditions. All results suggested that Ly5C was a novel anchor for constructing a surface display system for lactic acid bacteria (LAB). To demonstrate the applicability of the Ly5C-mediated surface display system, β-galactosidase (β-Gal) from Paenibacillus sp. strain K1, replacing GFP, was functionally displayed on the surfaces of LAB cells via Ly5C. The success in surface display of GFP and β-Gal opened up the feasibility of employing the cell wall anchor of bacteriophage endolysin for surface display in LAB.Surface display of heterologous proteins or peptides on bacteria is potentially important in several areas of biotechnology, including development of live vaccine delivery systems, diagnostics, whole-cell absorbents, and novel biocatalysts (11). Lactic acid bacteria (LAB) have the status of being generally recognized as safe (GRAS), making them certainly more useful in food and medical applications than other bacterial species. The development of cell surface display systems for LAB has recently become one of the most active research areas. Most of the cell surface display systems for LAB reported thus far have made use of the C terminus of a cell wall-anchoring protein via an LPXTG motif (8, 12, 19, 24). This anchoring mechanism requires processing by a sortase for covalent anchoring of the protein to the cell wall peptidoglycan (15). Various anchoring proteins, such as membrane-spanning protein PgsA (16) and S-layer protein (3), have also been exploited for surface display. However, heterologous proteins have been anchored to the producer cells, and the use of genetically modified organisms is less desirable or at least still being debated. Surface display of heterologous proteins on genetically unmodified Gram-positive bacteria has been successfully carried out using the peptidoglycan binding lysin motif (LysM) domain of the major autolysin AcmA of Lactococcus lactis (1, 2, 4, 18, 28).LysM was first discovered in the lysozyme of Bacillus phage φ29 as a C-terminal repeat composed of 44 amino acids separated by 7 amino acids (6). LysM is a common module found in more than 4,000 proteins of both prokaryotes and eukaryotes (6). Many bacterial proteins containing LysM are peptidoglycan hydrolases, such as p60 (20), Sep (26), LytF (31), AcmA (5), and Mur (7). The best-characterized LysM-containing protein is the N-acetylglucosaminidase AcmA of L. lactis subsp. cremoris MG1363. AcmA is the major autolysin and is required for cell separation and cell lysis during the stationary phase of L. lactis (5). It contains three domains: the N-terminal signal peptide, an active domain, and a C-terminal peptidoglycan anchor (cA) which consists of three LysM repeats (22). Several functional proteins, including malaria parasite surface antigen, β-lactamase, α-amylase, and viral capsid proteins, have been noncovalently bound to cell walls of AcmA-producing and non-AcmA-producing L. lactis as well as several other Gram-positive bacteria via cA (4, 17, 18, 23, 25).Endolysins from bacteriophages are cell wall hydrolases involved in cell lysis to release the progeny particles from the host cells (9, 30). Most endolysins lack a signal peptide and are translocated across the membrane by the aid of the holin protein. This protein typically contains an N-terminal catalytic domain and a C-terminal cell wall binding domain (33). The endolysins Ply118 and Ply500 of a Listeria monocytogenes phage share a unique C-terminal cell wall binding domain which establishes specific recognition of and high-affinity binding to bacterial cell wall carbohydrates (13). The temperate bacteriophage φPYB5, isolated from the Lactobacillus fermentum YB5 strain, has a hexagonal head, noncontractile tails, and several fibers and belongs to Bradley''s group B as defined by the International Committee on Taxonomy of Viruses (32). The sequence of the endolysin gene lyb5 from the genome of φPYB5 has been deposited in GenBank under accession number {"type":"entrez-nucleotide","attrs":{"text":"EF531306","term_id":"145687952","term_text":"EF531306"}}EF531306, and the gene product has been successfully expressed in Escherichia coli and has shown a broad lytic spectrum (30).Here, we generated a fusion of green fluorescent protein (GFP) to the C terminus of Lyb5 (Ly5C) to construct a surface display system for LAB. The GFP was bound to the surfaces of various LAB cells by the aid of Ly5C. Moreover, by using the system constructed, β-galactosidase (β-Gal) was functionally displayed on the surfaces of LAB cells and retained its activity.     

Identification of Lactococcus lactis Genes Required for Bacteriophage Adsorption

The aim of this work was to identify genes in Lactococcus lactis subsp. lactis IL1403 and Lactococcus lactis subsp. cremoris Wg2 important for adsorption of the 936-species phages bIL170 and 645, respectively. Random insertional mutagenesis of the two L. lactis strains was carried out with the vector pGh9:ISS1, and integrants that were resistant to phage infection and showed reduced phage adsorption were selected. In L. lactis IL1403 integration was obtained in the ycaG and rgpE genes, whereas in L. lactis Wg2 integration was obtained in two genes homologous to ycbC and ycbB of L. lactis IL1403. rgpE and ycbB encode putative glycosyltransferases, whereas ycaG and ycbC encode putative membrane-spanning proteins with unknown functions. Interestingly, ycaG, rgpE, ycbC, and ycbB are all part of the same operon in L. lactis IL1403. This operon is probably involved in biosynthesis and transport of cell wall polysaccharides (WPS). Binding and infection studies showed that 645 binds to and infects L. lactis Wg2, L. lactis IL1403, and L. lactis IL1403 strains with pGh9:ISS1 integration in ycaG and rgpE, whereas bIL170 binds to and infects only L. lactis IL1403 and cannot infect Wg2. These results indicate that 645 binds to a WPS structure present in both L. lactis IL1403 and L. lactis Wg2, whereas bIL170 binds to another WPS structure not present in L. lactis Wg2. Binding of bIL170 and 645 to different WPS structures was supported by alignment of the receptor-binding proteins of bIL170 and 645 that showed no homology in the C-terminal part.     

High production of xanthan gum by a strain ofXanthomonas campestris conjugated withLactococcus lactis

Summary Plasmid pNZ521, containing phospho--galactosidase, maturation protein and proteinase P genes, was conjugally transferred for the first time fromL.lactis intoX.campestris XLM1.After 20 generations 67% of the tested colonies were resistant to chloramphenicol. In the transconjugant proteinase activity appeared in the growth medium, whereas inL.lactis MG1820 it was extracted from the cell wall. Proteinase activity and production of xanthan gum were studied in different concentrations of whey. Xanthan gum production was found much higher in all cultures with the transconjugant strain XLM1521.