Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88 ± 11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.     

Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88 ± 11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.     

Study of Bacillus subtilis Endospores in Soil by Use of a Modified Endospore Stain

The Schaeffer-Fulton endospore stain was modified so that it would stain Bacillus subtilis endospores in soil smears. The modified stain differentiated among dormant spores, spores undergoing activation, and spores which had germinated but had not yet shown outgrowth. These differentiations were seen for spores in soil and for pure spore preparations in the laboratory. This stain was used to show reversible B. subtilis spore activation promoted by an Ensifer adhaerens-like indigenous bacterium in soil and by pure cultures of E. adhaerens added to spores in the laboratory. Under the specific conditions in the laboratory, spore germination did not proceed beyond the activation stage, and relatively little change occurred in the numbers of both E. adhaerens and B. subtilis. This was also true in soil, although some germination with destruction of spores and vegetative cells did occur if the soil had been nutritionally enriched by preincubation with incorporated ground alfalfa.     

Bacillus penetrans n. comb. Causing a virulent disease of plant-parasitic nematodes

The prokaryotic and bacterial nature of the incitant of a lethal disease of economically important plant-parasitic nematodes was confirmed by electron microscopy. The organism (formerly Duboscqia penetrans Thorne, Microsporea: Protozoa) was renamed Bacillus penetrans n. comb., Bacillaceae. B. penetrans produces an endospore typical of Bacillus spp., and its life cycle and spore morphology are similar to B. popilliae and B. lentimorbus, the “milky disease” organisms of insects. It differs from the latter pathogens in spore shape, in the dichotomously-branched colonies formed in the host pseudocoelom by nonseparating vegetative cells, and in that the spores are not known to be ingested by nematodes. Substantial reductions in Pratylenchus scribneri populations and in root-knot disease of tomato were obtained in glasshouse tests with the pathogen. Endospore production in vivo presents the first possibility of biological control of pest nematodes with inoculum of a highly specific virulent pathogen.     

Identification of a novel spore wall protein (SWP26) from microsporidia Nosema bombycis

Microsporidia are obligate intracellular parasites related to fungi with resistant spores against various environmental stresses. The rigid spore walls of these organisms are composed of two major layers, which are the exospore and the endospore. Two spore wall proteins (the endosporal protein-SWP30 and the exosporal protein-SWP32) have been previously identified in Nosema bombycis. In this study, using the MALDI-TOF-MS technique, we have characterised a new 25.7-kDa spore wall protein (SWP26) recognised by monoclonal antibody 2G10. SWP26 is predicted to have a signal peptide, four potential N-glycosylation sites, and a C-terminal heparin-binding motif (HBM) which is known to interact with extracellular glycosaminoglycans. By using a host cell binding assay, recombinant SWP26 protein (rSWP26) can inhibit spore adherence by 10%, resulting in decreased host cell infection. In contrast, the mutant rSWP26 (rΔSWP26, without HBM) was not effective in inhibiting spore adherence. Immuno-electron microscopy revealed that this protein was expressed largely in endospore and plasma membrane during endospore development, but sparsely distributed in the exospore of mature spores. The present results suggest that SWP26 is a microsporidia cell wall protein that is involved in endospore formation, host cell adherence and infection in vitro. Moreover, SWP26 could be used as a good prospective target for diagnostic research and drug design in controlling the silkworm, Bombyx mori, pebrine disease in sericulture.     

Fine structure of resting spore formation and germination in Entomophthora virulenta

The fine structure during the formation and germination of resting spores of Entomophthora virulenta is described. There were many microbodies in contact with oil droplets, and the microbodies appeared to participate in spore germination. The mature resting spore had an epispore layer with two regions and an endospore layer with five regions. Dictyosomes, numerous vesicles, and lomasomes were produced during the formation of the endospore layer. Prior to spore germination, the single large oil droplet separated into numerous small oil droplets, and the new cell wall was formed beneath the endospore layer which gradually disintegrated possibly by enzymatic actions. The germ tube perforated the epispore layer mainly by mechanical pressure.     

Immunological Homology Between Crystal and Spore Protein of Bacillus thuringiensis

Spore suspensions containing about 0.3% crystals and crystal suspensions containing about 0.1% spores were obtained from cultures of Bacillus thuringiensis by extraction with a two-phase system. Both preparations were tested for the presence of contaminating material from vegetative cells and were judged to be clean. Solutions of spore protein were obtained by extracting broken spores with phosphate buffer followed by extraction with either alkali- or urea-mercaptoethanol. The alkali spore or urea spore extracts had the same isoelectric point as crystal protein solubilized with these reagents. An antiserum prepared against alkali crystal solution precipitated alkali or urea spore extracts and crystal solutions but not phosphate spore extracts or extracts of whole cells. Lines of identity between spore and crystal precipitates were observed by using the Ouchterlony double-diffusion technique. Absorption of the antiserum with an excess of urea spore extract caused a disappearance of the precipitin bands originating from the spore protein and the homologous bands from the crystal protein. The results suggest that the crystal and endospore contain one or more common proteins.     

Composition and Ultrastructure of Streptomyces venezuelae

Streptomyces venezuelae is a filamentous bacterium with branching vegetative hyphae embedded in the substrate and aerial hyphae bearing spores. The exterior of the spore is inlaid with myriads of tiny rods which can be removed with xylene. The spore wall is approximately 30 nanometers thick. Occasionally, it can be seen that the plasma membrane and the membranous bodies within a spore are connected. The spore's germ plasm is not separated from the cytoplasm by a nuclear envelope. The cell walls of the vegetative hyphae, which are about 15 nanometers thick, are structurally and chemically similar to those of gram-positive bacteria. The numerous internal membranous bodies, some of which arise from the plasma membrane of the vegetative hypha, may be vesicular, whirled, or convoluted. Membranous bodies are usually prominent at the hyphal apices and are associated with septum formation. The germ plasm is an elongate, contorted, centrally placed area of lower electron density than the hyphal cytoplasm. The spores differ from the vegetative hyphae, not only in fine structure, but also in the arginine and leucine contents of their total cellular proteins.     

Live Cell Imaging of Germination and Outgrowth of Individual Bacillus subtilis Spores; the Effect of Heat Stress Quantitatively Analyzed with SporeTracker

Spore-forming bacteria are a special problem for the food industry as some of them are able to survive preservation processes. Bacillus spp. spores can remain in a dormant, stress resistant state for a long period of time. Vegetative cells are formed by germination of spores followed by a more extended outgrowth phase. Spore germination and outgrowth progression are often very heterogeneous and therefore, predictions of microbial stability of food products are exceedingly difficult. Mechanistic details of the cause of this heterogeneity are necessary. In order to examine spore heterogeneity we made a novel closed air-containing chamber for live imaging. This chamber was used to analyze Bacillus subtilis spore germination, outgrowth, as well as subsequent vegetative growth. Typically, we examined around 90 starting spores/cells for ≥4 hours per experiment. Image analysis with the purposely built program “SporeTracker” allows for automated data processing from germination to outgrowth and vegetative doubling. In order to check the efficiency of the chamber, growth and division of B. subtilis vegetative cells were monitored. The observed generation times of vegetative cells were comparable to those obtained in well-aerated shake flask cultures. The influence of a heat stress of 85°C for 10 min on germination, outgrowth, and subsequent vegetative growth was investigated in detail. Compared to control samples fewer spores germinated (41.1% less) and fewer grew out (48.4% less) after the treatment. The heat treatment had a significant influence on the average time to the start of germination (increased) and the distribution and average of the duration of germination itself (increased). However, the distribution and the mean outgrowth time and the generation time of vegetative cells, emerging from untreated and thermally injured spores, were similar.     

The Ultraviolet Photochemistry and Photobiology of Vegetative Cells and Spores of Bacillus megaterium

The ultraviolet (UV) photochemistry and photobiology of spores and vegetative cells of Bacillus megaterium have been studied. The response of vegetative cells of B. megaterium appears qualitatively similar to those of Escherichia coli, Micrococcus radiodurans, and Bacillus subtilis with respect to photoproduct formation and repair mechanisms. UV irradiation, however, does not produce cyclobutane-type thymine dimers in the DNA of spores, although other thymine photo-products are produced. The photoproducts do not disappear after photoreactivation, but they are eliminated from the DNA by a dark-repair mechanism different from that found for dimers in vegetative cells. Irradiations performed at three wavelengths produce the same amounts of spore photoproduct and give the same survival curves. Variation of the sporulation medium before irradiation results in comparable alterations in the rate of spore photoproduct production and in survival.     

Effects of Lactic Acid Bacteria and Organic Acids on Growth and Germination of Bacillus cereus

Growth and germination of vegetative cells and endospores of Bacillus cereus were affected by Streptococcus lactis, Streptococcus thermophilus, Lactobacillus acidophilus, and Lactobacillus bulgaricus in nonfat milk medium and by salts of organic acids in broth medium. Growth of the lactic acid bacteria was not affected by B. cereus. B. cereus increased rapidly to about 10⁸ CFU/ml when cells were added at the beginning of growth of lactic acid bacteria; it was inactivated slowly when added after 24 h and rapidly when added after 72 h of lactic acid bacterial growth. Streptococci were more inhibitory to the growth of B. cereus than lactobacilli were at 24 h. Spore germination was not affected after 24 h, but it was inhibited after 48 and 72 h of lactic acid bacterial growth. Acetate was more inhibitory to the growth of vegetative cells, while formate was more inhibitory to spore germination. Acetate, formate, and lactate (all at 0.1 M) completely inactivated multiplication of B. cereus at pH 6.1, 6.0, and 5.6, respectively. Spores of B. cereus were more resistant to these organic acids compared with the resistance of vegetative cells. Formate, lactate, and acetate (all at 0.1 M) caused 50% inhibition of spore germination at pH 4.4, 4.3, and 4.2, respectively.     

Temporal Formation and Immunolocalization of an Endospore Surface Epitope During Pasteuria penetrans Sporogenesis

The synthesis and localization of an endospore surface epitope associated with the development of Pasteuria penetrans was determined using a monoclonal antibody (MAb) as a probe. Nematodes, uninfected or infected with P. penetrans, were harvested at 12, 16, 24, and 38 days after inoculation (DAI) and then examined to determine the developmental stage of the bacterium. Vegetative growth of P. penetrans was observed only in infected nematodes harvested at 12 and 16 DAI, whereas cells at different stages of sporulation and mature endospores were observed at 24 and 38 DAI. ELISA and immunoblot analysis revealed that the adhesin-associated epitope was first detected at 24 DAI, and increased in the later stages of sporogenesis. These results indicate that the synthesis of adhesin-related proteins occurred at a certain developmental stage relative to the sporulation process, and was associated with endospore maturation. Immunofluorescence microscopy indicated that the distribution of the epitope is nearly uniform on the periphery of each spore, as defined by parasporal fibers. Immunocytochemistry at the ultrastructural level indicated a distribution of the epitope over the parasporal fibers. The epitope also was detected over other structures such as sporangium and exosporium during the sporogenesis process, but it was not observed over the cortex, inner-spore coat, outer-spore coat, or protoplasm. The appearance of the adhesin epitope first at stage III of sporogenesis and its presence on the parasporal fibers are consistent with an adhesin-related role in the attachment of the mature endospore to the cuticle of the nematode host.     

Infection of Tribolium castaneum with Bacillus thuringiensis: Quantification of Bacterial Replication within Cadavers,Transmission via Cannibalism,and Inhibition of Spore Germination

Reproduction within a host and transmission to the next host are crucial for the virulence and fitness of pathogens. Nevertheless, basic knowledge about such parameters is often missing from the literature, even for well-studied bacteria, such as Bacillus thuringiensis, an endospore-forming insect pathogen, which infects its hosts via the oral route. To characterize bacterial replication success, we made use of an experimental oral infection system for the red flour beetle Tribolium castaneum and developed a flow cytometric assay for the quantification of both spore ingestion by the individual beetle larvae and the resulting spore load after bacterial replication and resporulation within cadavers. On average, spore numbers increased 460-fold, showing that Bacillus thuringiensis grows and replicates successfully in insect cadavers. By inoculating cadaver-derived spores and spores from bacterial stock cultures into nutrient medium, we next investigated outgrowth characteristics of vegetative cells and found that cadaver-derived bacteria showed reduced growth compared to bacteria from the stock cultures. Interestingly, this reduced growth was a consequence of inhibited spore germination, probably originating from the host and resulting in reduced host mortality in subsequent infections by cadaver-derived spores. Nevertheless, we further showed that Bacillus thuringiensis transmission was possible via larval cannibalism when no other food was offered. These results contribute to our understanding of the ecology of Bacillus thuringiensis as an insect pathogen.     

Bacillus subtilis Cells Lacking Penicillin-Binding Protein 1 Require Increased Levels of Divalent Cations for Growth

Bacillus subtilis strains lacking penicillin-binding protein 1 (PBP1), encoded by ponA, required greater amounts of Mg²⁺ or Ca²⁺ for vegetative growth or spore outgrowth than the wild-type strain and strains lacking other high-molecular-weight (HMW) PBPs. Growth of ponA cells in a medium low in Mg²⁺ also resulted in greatly increased cell bending compared to wild-type cells or cells lacking other HMW PBPs. The addition of high levels of Mg²⁺ to growth media eliminated these phenotypes of a ponA mutant. In contrast to the effects of divalent cations, NaCl did not restore ponA cell growth in a divalent-cation-deficient medium. Surprisingly, wild-type cells swelled and then lysed during both vegetative growth and spore outgrowth when 500 mM NaCl was included in a divalent-cation-deficient medium. Again, Mg²⁺ addition was sufficient to allow normal vegetative growth and spore outgrowth of both wild-type and ponA cells in a medium with 500 mM NaCl. These studies demonstrate that (i) while HMW PBPs possess largely redundant functions in rich medium, when divalent cations are limiting, PBP1 is required for cell growth and spore outgrowth; and (ii) high levels of NaCl induce cell lysis in media deficient in divalent cations during both vegetative growth and spore outgrowth.     

THE PARASPORAL BODY OF BACILLUS LATEROSPORUS LAUBACH

On sporulation the slender vegetative rods swell and form larger spindle-shaped cells in which the spores are formed. When the spores mature they lie in a lateral position cradled in canoe-shaped parasporal bodies which are highly basophilic and can be differentiated from the surrounding vegetative cell cytoplasm with dilute basic dyes. On completion of sporulation the vegetative cell protoplasm and the cell wall lyse, leaving the spore cradled in its parasporal body. This attachment continues indefinitely on the usual culture medium and even persists after the spores have germinated. In thin sections of sporing cells the bodies are differentiated from the cell protoplasm by differences in structure. Whereas the protoplasm has a granular appearance, in both longitudinal and cross-sections the parasporal body comprises electron-dense lamellae running parallel with the membranes of the spore coat and less electron-dense material in the interstices of the lamellae. The inner surface of the body is contiguous with that of the spore coat as if it were part of the spore, rather than a separate body attached to the spore. The staining reactions of the parasporal body are not consistent with those of any substance described in bacteria. With Giemsa the bodies stain like chromatin, but the Feulgen reaction indicates that they do not contain the requisite nucleic acid. With an aqueous solution of toluidine blue they stain metachromatically, but with an acidified solution the results are variable. Neisser's stain for polyphosphate is negative. The basophilic substance is removed from the body with some organic solvents. This basophilic substance has not been specifically identified with any material seen in ultrathin sections, but it is suggested that it might be the less electron-dense material in the interstices of the lamellar structure. In contrast to the spore coat of B. laterosporus, those of its two relatives B. brevis and B. circulans take up basic stain like the parasporal body. Thin spore sections of these species have shown that the walls are thicker than those surrounding the spores of B. laterosporus, and it is suggested that the outer stainable layer of brevis and circulans spores is an accessory coat which in laterosporus may have been deformed to give a parasporal body.     

Cortex peptidoglycan lytic activity in germinating Bacillus anthracis spores

Bacterial endospore dormancy and resistance properties depend on the relative dehydration of the spore core, which is maintained by the spore membrane and its surrounding cortex peptidoglycan wall. During spore germination, the cortex peptidoglycan is rapidly hydrolyzed by lytic enzymes packaged into the dormant spore. The peptidoglycan structures in both dormant and germinating Bacillus anthracis Sterne spores were analyzed. The B. anthracis dormant spore peptidoglycan was similar to that found in other species. During germination, B. anthracis released peptidoglycan fragments into the surrounding medium more quickly than some other species. A major lytic enzymatic activity was a glucosaminidase, probably YaaH, that cleaved between N-acetylglucosamine and muramic-delta-lactam. An epimerase activity previously proposed to function on spore peptidoglycan was not detected, and it is proposed that glucosaminidase products were previously misidentified as epimerase products. Spore cortex lytic enzymes and their regulators are attractive targets for development of germination inhibitors to kill spores and for development of activators to cause loss of resistance properties for decontamination of spore release sites.     

Chemical and Morphological Studies of Bacterial Spore Formation : II. Spore and Parasporal Protein Formation in Bacillus cereus var. Alesti

The development of both the spore and parasporal protein crystal of Bacillus cereus var. alesti was followed using chemical and cytological techniques. The changes which led to the formation of the fore-spore were similar to those already described for Bacillus cereus. However, adjacent to the developing fore-spore a small inclusion became discernible in phase contrast. This protein inclusion during its growth was differentiated from the chromatin and lipid-containing inclusions by sequential staining techniques. During spore and crystal formation no net synthesis of either nucleic acid was detected. Tracer studies with radioactive phosphorus confirmed that the spore chromatin was derived from that in the vegetative cell. These same studies also indicated that a turnover of ribonucleic acid occurred during the sporulation process. During their formation both the spore and crystal incorporated methionine-³⁵S from the medium and from cellular material into a bound form. Sequential extractions with alkali and with alkaline-thioglycollate reagent revealed that the solubility characteristics of the mature crystal were possibly related to the presence of intermolecular disulphide bonds which developed after the major synthesis of the crystal was complete. The synthetic nature of sporogenesis and crystal formation is discussed with reference to the concept of "endotrophic" sporulation.     

Diversity and bioactive potential of endospore-forming bacteria cultured from the marine sponge Haliclona simulans

Aims: Despite the frequent isolation of endospore‐formers from marine sponges, little is known about the diversity and characterization of individual isolates. The main aims of this study were to isolate and characterize the spore‐forming bacteria from the marine sponge Haliclona simulans and to examine their potential as a source for bioactive compounds. Methods and Results: A bank of presumptive aerobic spore‐forming bacteria was isolated from the marine sponge H. simulans. These represented c. 1% of the total culturable bacterial population. A subgroup of thirty isolates was characterized using morphological, phenotypical and phylogenetic analysis. A large diversity of endospore‐forming bacteria was present, with the thirty isolates being distributed through a variety of Bacillus and Paenibacillus species. These included ubiquitous species, such as B. subtilis, B. pumilus, B. licheniformis and B. cereus group, as well as species that are typically associated with marine habitats, such as B. aquimaris, B. algicola and B. hwajinpoensis. Two strains carried the aiiA gene that encodes a lactonase known to be able to disrupt quorum‐sensing mechanisms, and various isolates demonstrated protease activity and antimicrobial activity against different pathogenic indicator strains, including Clostridium perfringens, Bacillus cereus and Listeria monocytogenes. Conclusions: The marine sponge H. simulans harbours a diverse collection of endospore‐forming bacteria, which produce proteases and antibiotics. This diversity appears to be overlooked by culture‐dependent and culture‐independent methods that do not specifically target sporeformers. Significance and Impact of Study: Marine sponges are an as yet largely untapped and poorly understood source of endospore‐forming bacterial diversity with potential biotechnological, biopharmaceutical and probiotic applications. These results also indicate the importance of combining different methodologies for the comprehensive characterization of complex microbial populations such as those found in marine sponges.     

FOWLER'S BACILLUS AND ITS PARASPORAL BODY

Fowler's bacillus is one of several organisms which form a non-viable inclusion or parasporal body during the process of sporulation. This body is globular and may be as large as or larger than the spore. Its position in the cell is not random; the spore is terminal and the body paracentral, lying between the spore and the remaining vegetative cell chromatin bodies. On completion of sporulation both spore and body are contained within an exosporium. The sequence in the development of the cell structures was followed in ultrathin sections of material fixed in permanganate. When sporulation is well advanced the body begins to grow from a single crystal, then presumably as a result of some disorientation in the growth process it develops as a multicrystalline body with the lattices orientated at different angles. When the body approximates the spore in size, a lamella coat is formed and an exosporium develops which eventually encircles the body and the spore. Other lamella systems microscopically similar to those surrounding the parasporal body develop free in the cytoplasm outside the exosporium. In both of these systems the number of lamellae is variable. The spore coat of Fowler's bacillus, consisting of an outer lamella layer and an inner unresolved amorphous layer has been found microscopically identical to the spore coat of B. cereus. In both organisms the lamella layer of the spore coat consists, in contrast to the other lamella systems, of a regular number of lamellae. Physiological tests would indicate that Fowler's bacillus is a variety of B. cereus.