Simple and green approach for photoluminescent carbon dots prepared from faba bean seeds as a luminescent probe for determination of Hg+ ions and cell imaging

In this research, for the first time, a dedicated sensor was designed to detect Hg⁺ ions using photoluminescent carbon dots (CDs). Due to the preferred green synthesis of CDs from bio-resources, carbohydrate-rich faba bean seeds as a potential carbon precursor were applied to the synthesis of CDs. The CDs were prepared from the faba bean seeds using the hydrothermal method in an aqueous solution in the absence of substances such as an acid or base and any other additives. The synthesized CDs exhibited maximum emission intensity at 387 nm when excited at 310 nm and their luminescence quantum yield was calculated to be ~5.94%. Then, the fluorescence emission of CDs was examined in the presence of different metal ions. Results revealed that the CDs had good selectivity towards the Hg⁺ ions, so the fluorescence emission was significantly changed in the presence of these ions with a limit of detection (LOD) as low as 0.35 μM. Furthermore, because of their very low cytotoxicity, these CDs can be applied for cell imaging.     

A red fluorescent carbon dots with good water solubility for rapid detection of Al3+ in actual samples

We developed a facile strategy for the fabrication of red fluorescent carbon nanodots (R-CDs) and demonstrated their applications for Al³⁺ sensing. Red-emission carbon dots (CDs) were synthesized using a simple hydrothermal treatment with citric acid and urea as precursors, manifesting intriguing red-emission behaviour at 610 nm. With increasing Al³⁺ concentration, the fluorescence band at 610 nm decreased gradually. Monitoring the intrinsic fluorescence variation (I_610nm), as-prepared CDs were developed as an effective platform for fluorescent Al³⁺ sensing, with a linear range of 0.5–60.0 μM and a detection limit of 3.0 nM. More importantly, R-CDs have been applied successfully to the analysis of Al³⁺ in actual samples with satisfactory recoveries in the range 97.12–102.05%, which indicated that obtained CDs could be implemented as an effective tool for the identification and detection of Al³⁺ in actual samples.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

‘Turn‐on’ fluorescence sensing of hydrogen peroxide in marine food samples using a carbon dots–MnO2 probe

A ‘turn‐on’ fluorescence method for detection of hydrogen peroxide (H₂O₂) in marine food samples is presented in this article. Using this method, a carbon dots (CDs)–MnO₂ probe was formed in which fluorescence intensity (FI) of CDs was quenched through fluorescence resonance energy transfer by addition of MnO₂ nanosheets. When H₂O₂ was added into the CDs–MnO₂ solution, the MnO₂ nanosheets formed Mn²⁺ ions due to a redox reaction between H₂O₂ and MnO₂ nanosheets, and CD FI was recovered. Under optimized conditions, the detection limit for H₂O₂ was 0.87 μM, and analytical linear range was 4–100 μM. Furthermore, this developed fluorescence sensing system was successfully used with satisfactory results to determine trace H₂O₂ content in marine food samples.     

Application of a luminous intensity variation fluorescent probe for the detection of ferric ions

A luminous intensity variation fluorescent probe (Probe 1) for the detection of ferric ion was developed. The quantitative range of Fe³⁺ content detected was 0–600 μM with the limit of detection at 0.76 μM. Furthermore, after 20 min of Fe³⁺ addition, the intensity of the luminescence of Probe 1 solution gradually decreased with increase in Fe³⁺ concentration. In addition, the B and G values of these images showed a linear relationship with Fe³⁺ concentration (0–500 μM). Probe 1 was successfully used for the rapid determination of Fe³⁺ concentration in real samples. This study demonstrates that Probe 1 is an excellent tool for the rapid determination of Fe³⁺ content in real samples using a smart phone without professional equipment.     

Polymer composite fluorescent hydrogel film based on nitrogen‐doped carbon dots and their application in the detection of Hg2+ ions

A simple microwave‐assisted solvothermal method was used to prepare fluorescent nitrogen‐doped carbon dots (N‐CDs) with high fluorescence quantum yield (79.63%) using citric acid and N‐(2‐hydroxyethyl)ethylenediamine as starting materials. The PVAm‐g‐N‐CDs grafted products were synthesized by amide bond formation between the carboxylic groups of N‐CDs and amine groups of polyvinylamine (PVAm). Fluorescent hydrogel films (PVAm‐g‐N‐CDs/PAM) were synthesized by interpenetration polymer network polymerization of PVAm‐g‐N‐CDs and acrylamide (AM). When used for ion detection, we found that the fluorescence of the hydrogel films was clearly quenched by addition of Hg²⁺. Repeatability tests on using the hydrogel films for Hg²⁺ detection showed that they could be applied at least three times. The PVAm‐g‐N‐CDs/PAM could serve as an effective fluorescent sensing platform for sensitive detection of Hg²⁺ ions with a detection limit of 0.089 μmol/L. This work may offer a new approach for developing recoverable and sensitive N‐CDs‐based sensors for biological and environmental applications.     

Fabrication of nitrogen‐ and phosphorous‐doped carbon dots by the pyrolysis method for iodide and iron(III) sensing

A facile and novel strategy to synthesize nitrogen‐ and phosphorous‐doped carbon dots (NPCDs) by single step pyrolysis method is described here. Citric acid is used as carbon source and di‐ammonium hydrogen phosphate is used as both nitrogen and phosphorous sources, respectively. Through the extensive study on optical properties, morphology and chemical structures of the synthesized NPCDs, it is found that as‐synthesized NPCDs exhibited good excitation‐dependent luminescence property, spherical morphology and high stability. The obtained NPCDs are stable in aqueous medium and possess a quantum yield of 10.58%. In this work, a new assay method is developed to detect iodide ions using the synthesized NPCDs. Here, the inner filter effect is applied to detect the iodide ion and exhibited a wide linear response concentration range (10–60 μM) with a limit of detection (LOD) of 0.32 μM. Furthermore, the synthesized NPCDs are used for the selective detection of iron(III) (Fe³⁺) ions and cell imaging. Fe³⁺ ions sensing assay shows a detection range from 0.2 to 30 μM with a LOD of 72 nM. As an efficient photoluminescence sensor, the developed NPCDs have an excellent biocompatibility and low cytotoxicity, allowing Fe³⁺ ion detection in HeLa cells.     

Bovine serum albumin functionalized blue emitting Ti3C2 MXene quantum dots as a sensitive fluorescence probe for Fe3+ ion detection and its toxicity analysis

In the present work, an improved class of protein functionalized fluorescent 2D Ti₃C₂ MXene quantum dots (MXene QDs) was prepared using a hydrothermal method. Exfoliated 2D Ti₃C₂ sheets were used as the starting precursor and transport protein bovine serum albumin (BSA) was used to functionalize the MXene QDs. BSA-functionalized MXene QDs exhibited excellent photophysical property and stability at various physiological parameters. High-resolution transmission electron microscopy analysis showed that the BSA@MXene QDs were quasispherical in shape with a size of ~2 nm. The fluorescence intensity of BSA@MXene QDs was selectively quenched in the presence of Fe³⁺ ions. The mechanism of fluorescence quenching was further substantiated using time-resolved fluorescence and Stern–Volmer analysis. The sensing assay showed a linear response within the concentration range 0–150 μM of Fe³⁺ ions with excellent limit of detection. BSA@MXene QDs probe showed good selectivity toward ferric ions even in the presence of other potential interferences. The practical applicability of BSA@MXene QDs was further tested in real samples for Fe³⁺ ion quantification and the sensor had good recovery rates. The cytotoxicity studies of the BSA@MXene QDs toward the human glioblastoma cells revealed that BSA@MXene QDs are biocompatible at lower doses and showed significant cytotoxicity at higher dosages.     

Metal ion-mediated carbon dot nanoprobe for fluorescent turn-on sensing of N-acetyl-l-cysteine

In this work, carbon dots (CDs) was easily synthesized from aspartic acid through a pyrolysis method. Based on their favourable fluorescence properties, CDs were utilized to design a metal ion-mediated fluorescent probe for N-acetyl-l -cysteine (NAC) detection. The fluorescence intensity of CDs was firstly quenched by manganese ions (Mn²⁺) through static quenching effect and subsequently restored by NAC via the combination with Mn²⁺ due to the coordination effect. Therefore, the fluorescent turn-on sensing of NAC was actuated based on the fluorescence quenching stimulated by Mn²⁺ and recovery induced by coordination. The fluorescence recovery efficiencies showed a proportional range to the concentration of NAC in the range 0.04–5 mmol L⁻¹ and the detection limit was 0.03 mmol L⁻¹. Furthermore, this metal ion-mediated fluorescent nanoprobe was applied to human urine sample detection and the standard recovery rates were located in the range 97.62–102.34%. This was the first time that Mn²⁺ was used to construct a fluorescent nanoprobe for NAC. Compared with other heavy metal ions, Mn²⁺ with good biosecurity prevented the risk of application, which made the nanoprobe green and biopractical. The facile synthesis of CDs and novel metal ion-mediated sensing mode made it a promising method for pharmaceutical analysis.     

Synthesis of highly fluorescent nitrogen and phosphorus doped carbon dots for the detection of Fe3+ ions in cancer cells

Highly fluorescent nitrogen and phosphorus‐doped carbon dots with a quantum yield 59% have been successfully synthesized from citric acid and di‐ammonium hydrogen phosphate by single step hydrothermal method. The synthesized carbon dots have high solubility as well as stability in aqueous medium. The as‐obtained carbon dots are well monodispersed with particle sizes 1.5–4 nm. Owing to a good tunable fluorescence property and biocompatibility, the carbon dots were applied for intercellular sensing of Fe³⁺ ions as well as cancer cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluorescent carbon nanoparticles obtained from charcoal via green methods and their application for sensing Fe3+ in an aqueous medium

Two green methods (microwave and hydrothermal) were employed for the preparation of water dispersible fluorescent carbon nanoparticles (CNPs) from activated charcoal. Microwave and hydrothermally synthesized carbon nanoparticles, (MW‐CNPs) and (HT‐CNPs), respectively were characterized by microscopic and spectroscopic techniques. A detailed study of their fluorescence characteristics was made. MW‐CNPs and HT‐CNPs were tested for metal ion selectivity in aqueous medium. MW‐CNPs showed selectivity for Fe³⁺ among the tested metal ions and important studies such as for interference, linear range and limit of detection were carried out. The application of MW‐CNPs for detection of Fe³⁺ in water was demonstrated.     

Study of trivalent samarium ion embedded lithium‐based borate glass for high‐density optical memory devices

Sm³⁺ ions doped strontium lithium lead borate glasses (SLLB:Sm) were prepared using a conventional melt‐quenching technique. The glasses were analyzed using X‐ray diffractometry and Fourier transform infrared spectroscopy, optical absorption, fluorescence spectral analysis, and fluorescence lifetime decay. The Judd–Ofelt (J–O) parameters and radiative parameters of the SLLB:Sm10 glass (1.0 mol% Sm³⁺ ion‐doped glass) were calculated using J–O theory. From the emission spectra, among all the synthesized glass, SLLB:Sm10 glass had the highest emission intensity for ⁴G_5/2→⁶H_11/2 transition (610 nm). Emission parameters, such as stimulated emission cross‐section and optical gain bandwidth, were calculated. For all concentrations of Sm³⁺ ions, the decay profile showed an exponential nature and decreased when the Sm³⁺ ion concentration was increased due to a concentration quenching effect. This result suggests that the synthesized SLLB:Sm10 glass could be used for application in high‐density optical memory devices.     

Metal ion-induced assembly of dipeptide-attached perylenediimide for fluorometric “turn on” detection of biologically important small molecule

A dipeptide-appended perylenediimide (PDI-CFF) fluorescent molecule was designed, synthesized, and characterized. Though the molecule does not dissolve in any individual solvent, it dissolves well in an organic/water mixed solvent system such as tetrahydrofuran/water. This new fluorescent molecule was self-assembled in a tetrahydrofuran/water mixture to form both nanofibrous network structures and a nano ring structure. It has shown nanofibril morphology by the interactions with ferric ions (PDI-CFF/Fe³⁺ system) with diminishing fluorescent property. Interestingly, L-ascorbic acid (LAA) interacts with the PDI-CFF/Fe³⁺ system, showing turn-on fluorescence. Another interesting feature is that the minimum detection limits for Fe³⁺ ions and LAA are at the submicromolar levels of 6.2 × 10⁻⁸ and 3 × 10⁻⁸ M, respectively. Moreover, the fluorescent (10 μM) signals can be monitored by the naked eye under handheld UV lamp irradiation at 365 nm, and this is very convenient for the real application. In this study, the molecule offers the opportunity for processing these sequential fluorescence responses in order to fabricate a implication logic gate that includes NOT, AND, and OR simple logic gates using chemical stimuli (ferric ions and LAA) as inputs and fluorescence emission at 536 nm as output. The detailed mechanism of interactions of Fe³⁺ with PDI-CFF and LAA with the PDI-CFF/Fe³⁺ system is vividly studied by using Fourier transform infrared (FT-IR) analysis and fluorescence. Moreover, this new molecule was reusable for several times without significant loss of its activity. The construction of logic gates using biologically important molecules/ions holds future promise for the design and development of new bio-logic gates.     

Fluorescent sensors based on quinoline‐containing styrylcyanine: determination of ferric ions,hydrogen peroxide,and glucose,pH‐sensitive properties and bioimaging

A novel styrylcyanine‐based fluorescent probe 1 was designed and synthesized via facile methods. Ferric ions quenched the fluorescence of probe 1, whereas the addition of ferrous ions led to only small changes in the fluorescence signal. When hydrogen peroxide was introduced into the solution containing probe 1 and Fe²⁺, Fe²⁺ was oxidized to Fe³⁺, resulting in the quenching of the fluorescence. The probe 1/Fe²⁺ solution fluorescence could also be quenched by H₂O₂ released from glucose oxidation by glucose oxidase (GOD), which means that probe 1/Fe²⁺ platform could be used to detect glucose. Probe 1 is fluorescent in basic and neutral media but almost non‐fluorescent in strong acidic environments. Such behaviour enables it to work as a fluorescent pH sensor in both the solution and solid states and as a chemosensor for detecting volatile organic compounds with high acidity and basicity. Subsequently, the fluorescence microscopic images of probe 1 in live cells and in zebrafish were achieved successfully, suggesting that the probe has good cell membrane permeability and a potential application for imaging in living cells and living organisms. Copyright © 2014 John Wiley & Sons, Ltd.     

Three colorimetric and off–on fluorescent chemosensors for Fe3+ in aqueous media

Three Rhodamine B derivatives were synthesized and characterized by ESI‐MS, NMR, HR‐MS and IR. The probes exhibit high selectivity and sensitivity towards Fe³⁺ over other metal ions in CH₃CN–water. Upon the addition of Fe³⁺, the spirocyclic ring of the probe was opened and a significant enhancement of visible color and fluorescence within the range of 540–700 nm was observed. The colorimetric and fluorescent response to Fe³⁺ can be conveniently detected even by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Job's plot, fluorescence titration and MS indicated the formation of 1:2 complexes between the probes and Fe³⁺. The reversibility of the reaction establishes the potential of these probes as chemosensors for Fe³⁺ detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of lead(II) in food samples using a functionalized paper-based fluorescent sensor modified by carbon dots

This work discusses surface modification of cellulose paper specimens for compatibility with nitrogen and sulfur co-doped carbon dots (NSCDs) for lead ion sensing. The interaction of carbon dots (CDs) and cellulose fibers was investigated using silane or chitosan-modified cellulose papers. It was found that modified papers could reduce undesirable redistribution of CDs, during paper drying. Also, only chitosan-modified filter paper was suitable for the successful immobilization of NSCDs. The effect of paper type, chitosan amount, pH, and NSCDs concentration was also studied, and a Whatman No. 42 filter paper modified with chitosan (1% w/v), pH 8.0, and an NSCD concentration of 2.5 g L⁻¹ being selected for further studies. The sensor exhibited high selectivity for lead(II) compared with other metal ions because lead(II) resulted in the most significant changes in the emitted light intensity. Variations in NSCDs fluorescence were measured using a fluorescence imaging system. The NSCDs-paper sensor showed a linear relationship between mean fluorescence intensity and lead(II) in the concentration range of 5.00–1.25 × 10² μmol L⁻¹ with a correlation coefficient (R²) of 0.9988 and a detection limit of 4.50 μmol L⁻¹. The suggested method showed satisfying results for lead(II) determination in different samples as a fast and low-cost approach with on-site application.     

Two new rhodamine‐based fluorescent chemosensors for Fe3+ in aqueous solution

Two new rhodamine‐based fluorescent probes were synthesized and characterized by NMR, high resolution mass spectrometer (HR‐MS) and IR. The probes displayed a high selectivity for Fe³⁺ among environmentally and biologically relevant metal ions in aqueous solution (CH₃OH–H₂O = 3 : 2, v/v). The significant changes in the fluorescence color could be used for naked‐eye detection. Job's plot, IR and ¹H NMR indicated the formation of 1: 1 complexes between sensor 1 and Fe³⁺. The reversibility establishes the potential of both probes as chemosensors for Fe³⁺ detection. The probe showed highly selectivity in aqueous solution and could be used over the pH range between 5 and 9. A simple paper test‐strip system for the rapid monitoring of Fe³⁺ was developed, indicating its convenient use in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Multifunctional organic–inorganic composite luminescent nanospheres

A simple general strategy was successfully developed for the preparation of magnetic–luminescent multifunctional nanocomposites by incorporating fluorescent (pyrene) and magnetic (Fe₃O₄) components simultaneously into a poly(styrene‐co‐methacrylic acid) [poly(St‐co‐MAA)] copolymer matrix. The nanospheres so prepared were characterized using scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) analysis. The prepared magnetic–fluorescent inorganic–organic nanocomposites have excellent magnetic and photoluminescent properties. They can be used in magnetic separation of trace amounts of sample, fluorescence detection and imaging applications, including magnetic resonance imaging (MRI) and fluorescence imaging. The fluorescence quenching of the nanospheres in the presence of different amounts of Cu²⁺ ions was also investigated. Under optimal experimental conditions, the relative fluorescence intensity of the composite nanosphere colloidal solution is proportional to the concentration of Cu²⁺ ions, which indicates that these multifunctional nanocomposites can be used for the magnetic separation and fluorescence detection of Cu²⁺ ions. Copyright © 2011 John Wiley & Sons, Ltd.     

Carbon dots synthesized by the m‐trihydroxybenzene as the carbon source and its application on the detection of pH value

New carbon dots (CDs) were prepared by a microwave method using m‐trihydroxybenzene and dilute sulphuric acid as raw materials. The as‐prepared CDs exhibited excellent water solubility and photoluminesence properties. The optimum excitation and emission wavelengths of the new CDs were at 365 nm and 465 nm, respectively. The fluorescence of the new CDs experienced remarkable changes in the presence of Britton–Robinson (BR) buffer solution with different pH values under 4°C after reacting for 70 min. In addition, a linear relationship between the logarithm of the relative fluorescence intensity ratio [lg(I_F/I_Fo)] of CDs and the pH values of the sensing system ranging 1.81–5.72 was obtained, with a correlation coefficient of 0.9933. Thus, a sensitive and simple method to detect the pH value of solution was developed. Furthermore, the analytical application of detecting the concentration of acetic acid in vinegar was investigated. The detection values were found similar to the reference values, fully demonstrating a good linear relationship between the logarithm of the relative fluorescence intensity ratio of the CDs and the pH value of the system. Hence, the method could be used to detect the concentration of acetic acid in vinegar.     

Facile synthesis,cytotoxicity and bioimaging of Fe3+ selective fluorescent chemosensor

The designing and development of fluorescent chemosensors have recently been intensively explored for sensitive and specific detection of environmentally and biologically relevant metal ions in aqueous solution and living cells. Herein, we report the photophysical results of alanine substituted rhodamine B derivative 3 having specific binding affinity toward Fe³⁺ with micro molar concentration level. Through fluorescence titration at 599 nm, we were confirmed that ligand 3 exhibited ratiometric fluorescence response with remarkable enhancement in emission intensity by complexation between 3 and Fe³⁺ while it appeared no emission in case of the competitive ions (Sc³⁺, Yb³⁺, In³⁺, Ce³⁺, Sm³⁺, Cr³⁺, Sn²⁺, Pb²⁺, Ni²⁺, Co²⁺, Cu²⁺, Ba²⁺, Ca²⁺, Mg²⁺, Ag⁺, Cs⁺, Cu⁺, K⁺) in aqueous/methanol (60:40, v/v) at neutral pH. However, the fluorescence as well as colorimetric response of ligand–iron complex solution was quenched by addition of KCN which snatches the Fe³⁺ from complex and turn off the sensor confirming the recognition process was reversible. Furthermore, bioimaging studies against L-929 cells (mouse fibroblast cells) and BHK-21 (hamster kidney fibroblast), through confocal fluorescence microscopic experiment indicated that ligand showed good permeability and minimum toxicity against the tested cell lines.