Transglutaminase‐modified wool keratin film and its potential application in tissue engineering

Transglutaminase (TGase) catalyzes the cross‐linking of many proteins and has been widely used to improve the properties of certain protein‐based materials. Keratin is considered as a promising biomaterial candidate following traditional chemical modification. In this study, the effect of TGase on the properties of a wool keratin film was investigated. The TGase‐modified film was applied to drug release and cell proliferation. Treatment with TGase (30 U/g keratin) for 18 h at 40°C increased the tensile strength of the film from 5.18 ± 0.15 MPa to 6.22 ± 0.11 MPa and decreased the elongation at break from 83.47 ± 1.79% to 72.12 ± 3.02%. The stability of the film in PBS and in artificial gastric juice was also improved. A rougher surface and a more compact cross‐section were observed by scanning electron microscopy photographs of the TGase‐treated film. SDS‐PAGE analysis confirmed that higher molecular weight proteins were formed in the TGase‐modified keratin solution and film. The results of the drug release assay using diclofenac indicated that both films with and without TGase treatment led to a high initial release in PBS, which was more constant in artificial gastric juice. The enzyme treatment led to a lower drug release rate from the film. Cell culture experiments suggested that the TGase‐mediated cross‐linked keratin film shows a good biocompatibility and that it can be used for tissue engineering applications.     

Synthesis of anionic poly(ethylene glycol) derivative for chitosan surface modification in blood-contacting applications

To improve blood compatibility, chitosan surface was modified by the complexa-tion-interpenetration method using an anionic derivative of poly(ethylene glycol) (PEG). Methoxypoly(ethylene glycol) sulfonate (MPEG sulfonate)-modified chitosan was prepared by allowing the base polymer to swell in an acidic medium, followed by polyelectrolyte complexation and interpenetration of MPEG sulfonate with the chitosan matrix. Addition of a strong base collapsed the base polymer to permanently immobilize the modifying agent on the surface. Electron spectroscopy for chemical analysis (ESCA) confirmed the presence of MPEG sulfonate on chitosan and the high resolution Cls peak showed an increase in -C—O- which is indicative of the ethylene oxide residues. The number of adherent platelets and the extent of platelet activation was significantly reduced on MPEG sulfonate-modified chitosan. Compared to an average of more than 66 fully activated platelets on unmodified chitosan surface, only 3.0 contact-adherent platelets were present on MPEG sulfonate-modified chitosan. Plasma recalcification time, a measure of the intrinsic coagulation reaction, was about 11.5 min in contact with modified chitosan. The results of this study show that chitosan surface can be modified by the complexation-interpenetration method with anionic PEG derivative. Surface-immobilized MPEG sulfonate was effective in preventing plasma protein adsorption and platelet adhesion and activation by the steric repulsion mechanism.     

基于海藻酸钠羟基改性的MPEG原位共价修饰微胶囊及抗蛋白性能

目的:通过对海藻酸钠链段羟基位点改性制备甲氧基聚乙二醇(MPEG)原位共价修饰的海藻酸钠/壳聚糖(AC)微胶囊,在保证MPEG修饰微胶囊机械强度不受影响的基础上,有效提高表面MPEG修饰密度,实现兼具良好机械稳定性及抗蛋白性能的微胶囊制备方法。方法:利用溴化氰对海藻酸钠羟基进行活化并将末端氨基的点击化学linker(BAT)接枝在主链上进而制备MPEG原位共价修饰微囊A_(B(OH))CP_N,用球磨法表征微囊机械强度,用Ig G和Fgn为模型考察微囊表面抗蛋白吸附性能,以L929细胞在其二维模拟平板膜上的黏附情况作为衡量指标,考察MPEG修饰微胶囊表面细胞粘附情况,并最终通过体内移植考察MPEG修饰微囊的生物相容性。结果:基于海藻酸钠羟基位点的MPEG原位共价修饰微胶囊能够实现与常规条件制备的微胶囊接近的机械强度;同时与对照组相比Ig G吸附量降低87.4%,Fgn吸附量降低75.5%,实现了良好的抗蛋白吸附性能;二维模拟平板膜表面L929细胞粘附情况显著改善,细胞粘附数与对照组相比降低了76.9%;体内移植结果证明MPEG修饰微囊细胞粘附极少,微囊与纤维层分离明显。结论:基于海藻酸钠羟基位点的MPEG原位修饰能够实现兼具良好机械稳定性及抗蛋白吸附性能的微胶囊。     

Reactions Catalyzed by Peg-Modified α-Chymotrypsin in Organic Solvents. Influence of Water Content and Degree of Modification

-Chymotrypsin was modified with cyanuric chloride activated monomethoxypolyethylene glycol (MPEG) with molecular weights 1900 and 5000. Using the higher molecular weight MPEG a product that was soluble in benzene at moderate levels of modification was obtained, whereas with MPEG 1900 almost all the enzyme's amino groups had to be modified for dissolving the conjugate. The catalytic activity decreased with increasing degree of substitution. Apparent V_max was considerably higher for the less modified enzyme preparation than for the more modified one, while K_m,app stayed almost constant. The modified enzyme was used for peptide synthesis. The reaction was dependent on the content of dissolved water. Both V_max,app and K_m,app increased with increasing water content. It was possible to achieve a process with complete conversion of substrate to dipeptide.     

Postsynthetic conjugation of biopolymers with high molecular mass poly(ethylene glycol): optimization of a solution process tested on synthetic oligonucleotides

The reaction of oligonucleotides with high molecular weight monomethoxy poly(ethylene glycol)s (MPEGs) has been tested to set up a convenient procedure for the postsynthetic conjugation in solution of biopolymers. A first oligonucleotide was previously modified in 5', using a liquid-phase procedure, with a linker carrying a terminal primary amino group to enhance its nucleophilic reactivity. Two procedures commonly utilized for the activation of the terminal OH groups of the MPEG were evaluated, that is, the reaction with pNO(2)-phenyl chloroformate and with N,N'-disuccinimidyl carbonate. Both water as well as organic solution conditions were employed and compared. In a second test, a 3'-amino modified, commercial 20-mer was also conjugated in a microscale condition to verify the effect of size and concentration of MPEG on the postsynthetic conjugation of these biopolymers under troublesome synthetic conditions.     

Promotional effect of 1‐butyl‐3‐methylimidazolium chloride ionic liquid on the enzymatic finishing of wool

To improve the effects of protease finishing on wool, 1‐butyl‐3‐methylimidazolium chloride ionic liquid was employed as a pretreatment reagent. It was found that ionic liquid pretreatment significantly changed the wool surface characteristics. The Allwördern reaction showed that the epicuticle layer was damaged by the ionic liquid, and X‐ray photoelectron spectroscopy analysis further demonstrated that the surface elemental composition was significantly changed. Ionic liquid pretreatment remarkably improved the accessibility of protease to the wool and thus accelerated the hydrolysis rate of keratin. The properties of wool fabric after combined processing were also changed. Dyeability results showed that the color depth was increased but the wet rubbing and washing fastness of wool fabrics showed a decreased half grade. The wettability results demonstrate that the contact angle was further reduced after the comprehensive treatment because of the exposure of more proteins under the fatty‐acid layer. In addition, the shrink proofing of wool fabric was also enhanced after combined processing. In summary, ionic liquid modification presents a promising pretreatment method for protease processing of wool.     

Structure‐Based Site‐Specific PEGylation of Fibroblast Growth Factor 2 Facilitates Rational Selection of Conjugate Sites

Polyethylene glycol modification (PEGylation) can enhance the pharmacokinetic properties of therapeutic proteins by the attachment of polyethylene glycol (PEG) to the surface of a protein to shield the protein surface from proteolytic degradation and limit aggregation. However, current PEGylation strategies often reduce biological activity, potentially as a result of steric hindrance of PEG. Overall, there are no structure‐based guidelines for selection of conjugate sites that retain optimal biological activity with improved pharmacokinetic properties. In this study, site‐specific PEGylation based on the FGF2‐FGFR1‐heparin complex structure is performed. The effects of the conjugate sites on protein function are investigated by measuring the receptor/heparin binding affinities of the modified proteins and performing assays to measure cell‐based bio‐activity and in vivo stability. Comprehensive analysis of these data demonstrates that PEGylation of FGF2 that avoids the binding sites for fibroblast growth factor receptor 1 (FGFR1) and heparin provides optimal pharmacokinetic enhancement with minimal losses to biological activity. Animal experiments demonstrate that PEGylated FGF2 exhibits greater efficacy in protecting against traumatic brain injury‐induced brain damage and neurological functions than the non‐modified FGF2. This rational structure‐based PEGylation strategy for protein modification is expected to have a major impact in the area of protein‐based therapeutics.     

Stabilization mechanism of MPEG modified trypsin based on thermal inactivation kinetic analysis and molecular modeling computation

Thermal inactivation kinetic analysis and molecular modeling computation were jointly utilized to illuminate the detailed stabilization mechanism of trypsin caused by methoxypolyethylene glycol (MPEG) modification. First, trypsin was modified by MPEG (molecular mass 350 Da) to enhance its thermal stability. As expected, the modified trypsin was more stable against temperature than the native form. Second, a new kinetic model, which has the ability of taking the thermal denaturation and autolysis effects of proteases into account, was established and used to analyze the thermal inactivation process of the native and modified trypsin. The kinetic analysis showed that the increased thermal stability of MPEG modified trypsin is the joint result of a reduction in autolysis and a decrease in thermal denaturation. Finally, the molecular modeling technique was also employed to calculate some structural information change, i.e. solvent accessible surface, intramolecular hydrogen bond and root mean square fluctuation, between the native and modified trypsin. The results of molecular modeling computation demonstrated that (i) the steric hindrance caused by MPEG chain would result in the decreased rate of autolysis, (ii) the decreased rate of thermal denaturation should be ascribed to the increased number of hydrogen bond, not the result of the increased molecular rigidity.     

Design,synthesis, and comparative evaluation of 99mTc(CO)3‐labeled N‐terminal and C‐terminal modified asparagine–glycine–arginine peptide constructs

The present study describes modification of asparagine–glycine–arginine (NGR) peptide at N‐terminally and C‐terminally by introduction of a tridentate chelating scaffold via click chemistry reaction. The N‐terminal and C‐terminal modified peptides were radiometalated with [^99mTc(CO)₃]⁺ precursor. The influence of these moieties at the two termini on the targeting properties of NGR peptide was determined by in vitro cell uptake studies and in vivo biodistribution studies. The two radiolabeled constructs did not exhibit any significant variation in uptake in murine melanoma B16F10 cells during in vitro studies. In vivo studies revealed nearly similar tumor uptake of N‐terminally modified peptide construct 5 and C‐terminally construct 6 at 2 h p.i. (1.9 ± 0.1 vs 2.4 ± 0.2% ID/g, respectively). The tumor‐to‐blood (T/B) and tumor‐to‐liver (T/L) ratios of the two radiometalated peptides were also quite similar. The two constructs cleared from all the major organs (heart, lungs, spleen, stomach, and blood) at 4 h p.i. (<1% ID/g). Blocking studies carried out by coinjection of cCNGRC peptide led to approximately 50% reduction in the tumor uptake at 2 h p.i. This work thus illustrates the possibility of convenient modification/radiometalation of NGR peptide at either N‐ or C‐terminus without hampering tumor targeting and pharmacokinetics.     

Glucose‐6‐phosphate dehydrogenase encapsulated in silica‐based hydrogels for operation in a microreactor

The future of hydrogen as fuel strongly depends on the possibility to produce it in an economic and clean way. Hydrogen can be produced from carbohydrates and water under mild conditions by means of a multistep synthetic pathway (13 enzymes) with very high yield. Crossover inhibitions and different optimal conditions of involved enzymes hinder the use of one‐pot approach. Immobilization of enzymes in coupled individual reactors may avoid this problem. This work deals with the immobilization in silica‐based hydrogels of one key enzyme of this pathway: glucose 6‐phosphate dehydrogenase from Leuconostoc mesenteroides. The carriers were prepared with an ethylene glycol‐modified silane, two polymers (polyethylene oxide and Pluronic®) and amino groups created by 3‐aminopropyltriethoxysilane. These parameters influenced the enzymatic activity after immobilization. Gels prepared by addition of polyethylene oxide gave the best results and were used as monoliths in microreactors with two different geometries. The systems showed a high operational stability but a low effective enzyme activity. Enzyme leaching and a nonideal flow pattern may account for the low activity observed. This work is possibly the first one dealing with the immobilization of glucose 6‐phosphate dehydrogenase in silica‐based gels for its application in flow‐through microreactors.     

Alkaline Polymer Membrane‐Based Ultrathin,Flexible, and High‐Performance Solid‐State Zn‐Air Battery

The increasing demand for portable and wearable electronics requires lightweight, thin, and highly flexible power sources, for example, flexible zinc‐air batteries (ZABs). The so‐far reported flexible ZAB devices mostly remain bulky, with a design consisting of two relatively thick substrates (e.g., carbon cloths and/or metal foams) and a gel electrolyte‐coated separator in between. Herein, an ultrathin (≈0.2 mm) solid‐state ZAB with high flexibility and performance is introduced by directly forming self‐standing active layers on each surface of an alkaline polymer membrane through an ink‐casting/hot‐pressing approach. A Fe/N‐doped 3D carbon with hierarchic pores and an interconnected network structure is used as cathode electrocatalyst, so that the backing gas‐diffusion layer (e.g., carbon cloth) can be abandoned. What is further, a microstructure‐modulating method to significantly increase the FeN₄ active sites for oxygen reduction reaction is developed, thus significantly boosting the performance of the ZAB. The assembled solid‐state ZAB manifests remarkable peak power density of 250 mW cm^?3 and high capacity of 150.4 mAh cm^?3 at 8.3 mA cm^?3, as well as excellent flexibility. The new design should provide valuable opportunity to the portable and wearable electronics.     

Synthesis and Antioxidant Activity of 3‐(Pyridin‐2‐ylmethyl)‐1,3‐thiazinan(thiazolidin)‐4‐ones

The antioxidant properties of two series of thiazolidinones and thiazinanones were reported. The novel six‐membered thiazinanones were synthesized from the efficient multicomponent reaction of 2‐picolylamine (2‐aminomethylpyridine), arenaldehydes, and the 3‐mercaptopropionic acid in moderate to excellent yields. These novel compounds were fully identified and characterized by NMR and GC‐MS techniques. In vitro antioxidant activities of all compounds were evaluated by 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) and 2,2′‐azinobis‐3‐ethylbenzothiazoline‐6‐sulfonic acid (ABTS) tests. The antioxidant assays of thiobarbituric acid reactive species and total thiol content levels in the cerebral cortex and liver of rats were also performed. Thiazinanone 5a showed the best radical scavenging activity in DPPH and ABTS tests, as well as reduced lipid peroxidation and increased total thiol group in biological systems. Altogether, the results may be considered a good starting point for the discovery of a new radical scavenger.     

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

All‐solid‐state sodium metal batteries (SSMBs) are of great interest for their high theoretical capacity, nonflammability, and relatively low cost owing partially to the abundance of sodium recourses. However, it is challenging to fabricate SSMBs because compared with their counterparts, which contain lithium metal, sodium metal is mechanically softer and more reactive toward the electrolyte. Herein, the synthesis and electrochemical properties of newly designed sodium‐containing hybrid network solid polymer electrolytes (SPEs) and their application in SSMBs are reported. The hybrid network is synthesized by controlled crosslinking of octakis(3‐glycidyloxypropyldimethylsiloxy)octasilsesquioxane and amine‐terminated polyethylene glycol in existence with sodium perchlorate (NaClO₄). Plating and stripping experiments using symmetric cells show prolonged cycle life of the SPEs, >5150 and 3550 h at current density of 0.1 and 0.5 mA cm^?2, respectively. The results for the first time show that the SPE|sodium metal interface migrates into the SPE phase upon cycling. SSMBs fabricated with the hybrid SPE sandwiched between sodium metal anode and bilayered δ‐Na_xV₂O₅ cathode exhibit record‐high specific capacity for solid sodium‐ion batteries of 305 mAh g^?1 and excellent Coulombic efficiency. This work demonstrates that the hybrid network SPEs are promising for SSMB applications.     

Purified silk fibroin‐L‐asparaginase bioconjugates show increased thermostability and resistance to trypsin digestion

Bioconjugation protocols have been recently used to improve the therapeutic properties of the anti‐leukemic enzyme L ‐asparaginase. In this study, we study the variation of reaction factors, such as mass ratio, pH value, reaction temperature and time, and the concentration of cross‐linker, in the modification reaction of L ‐asparaginase with silk fibroins. The optimum reaction parameters were obtained as follows: pH 7.0, mass ratio of silk fibroin to L ‐asparaginase 5:1, reaction time 8 h, and temperature 4°C. The rate of ε‐amino group modification was 57.88% and the recovery of modified L ‐asparaginase was 66.58% under these reaction conditions. We isolated and purified the silk‐L ‐asparaginase conjugates with two consecutive chromatography steps: anion‐exchange (XK 16×20, Q Sepharose FF) and gel filtration (Tricorn 10×600, Sephcryl S‐300 HR) chromatography. Finally, the stabilities of the enzymes were investigated. The results showed that modified L ‐asparaginase had a higher thermostability and higher resistance to trypsin digestion.     

The Effect of Gas Sparging in Cross‐Flow Microfiltration of 2,3‐Butanediol Fermentation Broth

Recovery of 2,3‐butanediol from a fermentation broth entails the separation of cells and other suspended solids as the initial step for subsequent separation stages. The aim of this work was to study the cross‐flow filtration of broth in the fermentation of 2,3‐butanediol from blackstrap molasses by Klebsiella oxytoca (NRRL B‐199). A plate type laboratory scale cross‐flow microfiltration unit with a 0.2‐μm cellulose acetate membrane was employed for this purpose. Preliminary results showed that the permeate flux would decline rapidly due to fouling caused by the natural impurities of blackstrap molasses, and modifications of the conventional cross‐flow filtration would be essential to achieve a filtration rate appropriate for practical purposes. In this work, the permeate flux was enhanced by air sparging, which scoured the membrane surface of colloidal deposits and allowed a practical filtration rate to be maintained. The average permeate flux increased by 39 % and 54 % for an air sparging rate of 0.5 L/min and 1.0 L/min respectively, in the case of an initial biomass concentration of 4.66 g/L. For an initial biomass concentration of 14.2 g/L, the flux increased by 105 % and 146 % for the gas rate of 0.5 and 1.0 L/min, respectively. It may be concluded that gas sparging is beneficial in cross‐flow filtration of thick suspensions like a fermentation broth.     

Microwave‐assisted aqueous synthesis of new quaternary‐alloyed CdSeTeS quantum dots; and their bioapplications in targeted imaging of cancer cells

In this study, we report for the first time a one‐pot approach for the synthesis of new CdSeTeS quaternary‐alloyed quantum dots (QDs) in aqueous phase by microwave irradiation. CdCl₂ was used as a Cd precursor during synthesis, NaHTe and NaHSe were used as Te and Se precursors and mercaptopropionic acid (MPA) was used as a stabilizer and source of sulfur. A series of quaternary‐alloyed QDs of different sizes were prepared. CdSeTeS QDs exhibited a wide emission range from 549 to 709 nm and high quantum yield (QY) up to 57.7 %. Most importantly, the quaternary‐alloyed QDs possessed significantly long fluorescence lifetimes > 100 ns as well as excellent photostability. Results of high‐resolution transmission electron microscopy (HRTEM), energy dispersive X‐ray spectroscopy (EDX) and powder X‐ray diffraction (XRD) spectroscopy showed that the nanocrystals possessed a quaternary alloy structure with good crystallinity. Fluorescence correlation spectroscopy (FCS) showed that QDs possessed good water solubility and monodispersity in aqueous solution. Furthermore, CdSeTeS QDs were modified with alpha‐thio‐omega‐carboxy poly(ethylene glycol) (HS‐PEG‐COOH) and the modified QDs were linked to anti‐epidermal growth factor receptor (EGFR) antibodies. QDs with the EGFR antibodies as labeling probes were successfully applied to targeted imaging for EGFR on the surface of SiHa cervical cancer cells. We believe that CdSeTeS QDs can become useful probes for in vivo targeted imaging and clinical diagnosis. Copyright © 2012 John Wiley & Sons, Ltd.     

Immunocytochemistry indicates that glycine‐rich beta‐proteins are present in the beta‐layer,while cysteine‐rich beta‐proteins are present in beta‐ and alpha‐layers of snake epidermis

Immunolocalization of glycine‐rich and cysteine–glycine‐medium‐rich beta‐proteins (Beta‐keratins) in snake epidermis indicates a different distribution between beta‐ and alpha‐layers. Acta Zoologica, Stockholm. The epidermis of snakes consists of hard beta‐keratin layers alternated with softer and pliable alpha‐keratin layers. Using Western blot, light and ultrastructural immunolocalization, we have analyzed the distribution of two specific beta‐proteins (formerly beta‐keratins) in the epidermis of snakes. The study indicates that the antibody HgG5, recognizing glycine‐rich beta‐proteins of 12–15 kDa, is poorly or not reactive with the beta‐layer of snake epidermis. This suggests that glycine‐rich proteins similar to those present in lizards are altered during maturation of the beta‐layer. Conversely, a glycine–cysteine‐medium‐rich beta‐protein (HgGC10) of 10–12 kDa is present in beta‐ and alpha‐layers, but it is reduced or disappears in precorneous and suprabasal cells destined to give rise to beta‐ and alpha‐cells. Together with the previous studies on reptilian epidermis, the present results suggest that beta‐proteins rich in glycine mainly accumulate on a scaffold of alpha‐keratin producing a resistant and hydrophobic beta‐layer. Conversely, beta‐proteins lower in glycine but higher in cysteine accumulate on alpha‐keratin filaments present in beta‐ and alpha‐layers producing resistant but more pliable layers.     

Esterified Derivatives of Panaxadiol and Their Inhibitory Effect on HL‐60, THP‐1, and PC‐3 Cell Lines

Panaxadiol is a dammarane‐type ginsenoside having high ginseng content. The 3‐hydroxy group of panaxadiol (PD) was modified by fatty acids and diacids. The modified panax glycol had enhanced anticancer activity. Twelve PD derivatives were evaluated and purified by chemical synthesis, column chromatography, co‐synthesis, and identification. The human leukemia cells THP‐1, HL‐60, and human prostate cancer cell lines PC‐3 were evaluated; PD derivatives were tested and evaluated in vitro by MTT assay. The results showed that the antitumor activities of some derivatives on three tumor cell lines were better than those of PD.     

Mechanistic limitations in the synthesis of polyesters by lipase-catalyzed ring-opening polymerization

Lipase-catalyzed polymerization of caprolactone (CL) in toluene with methoxy-poly(ethylene glycol) (MPEG) and water as initiators was characterized in detail for mechanistic insight. (1)H NMR analysis of polycaprolactone chains (PCL), dicaprolactone, degree of esterification of MPEG, and fractions of PCL chains initiated by MPEG and water were used to follow the reactions. The data were analyzed with the kinetic scheme involving formation of the acylenzyme and its consequent reaction with MPEG, water, or PCL to yield the MPEG- or water-initiated PCL chains, or increase in PCL length. A limit for MPEG initiator esterification in lipase-catalyzed CL polymerization was observed and was explained by preferential reaction of PCL propagation over MPEG esterification at long reaction times and low MPEG concentrations. Slower monomer conversion in concentrated monomer solutions was explained by decreased partitioning of PCL between the solvent and the enzyme. This effect resulted in inhibition of the lipase by the reaction product, PCL chains, and/or insufficient diffusion of monomer to the enzyme active site. High monomer/initiators ratio in these solutions did not yield longer polymer chains due to decreased monomer conversion and the corresponding decrease in product yields; lower yields were also observed for chain initiation by MPEG and water. A shift in the reaction rate-limiting step from formation of acylenzyme in dilute CL solutions to its deacylation in concentrated CL solutions yielded higher PCL polydispersity due to increased initiation by water. Enhanced intramolecular cyclization was also observed. Endgroup composition of PCL chains was influenced by the concentration of monomer, ratio of initiators (MPEG and water), and reaction time, yielding PCL chains initiated exclusively by MPEG at "infinite reaction times."     

Chromatographic removal combined with heat,acid and chaotropic inactivation of four model viruses

This study was conducted to get an insight into monomethoxypolyethylene glycol (MPEG) modified recombinant human TNF-alpha (rhTNF-alpha) derived from gene cloning and expression. The purification and modification processes were integrated together to make the scale-up production of PEG-modified rhTNF-alpha practical. Capillary electrophoresis was demonstrated to be a highly efficient tool in the biochemical characterization of the PEGylated products compared to slab electrophoresis. The cytotoxicity of MPEG-modified rhTNF-alpha was studied in vitro towards L929 cell line and found to decrease gradually along with the increase in the reaction ratio between the activated MPEG and the native rhTNF-alpha. The MPEG-modified rhTNF-alpha was more resistant to proteinase degradation in vitro than the native. When MPEG chains were released partially from the MPEG-modified rhTNF-alpha by alkaline pretreatment, the cytotoxicity of the MPEG-modified rhTNF-alpha was enhanced, which was in contrast to the native. These results would be helpful to explain the disagreement between the high bioavailability of MPEG-modified TNF-alpha in vivo and its decreased cytotoxicity in vitro.