Colorimetric chiral fluorescent sensors for Eu3+ and sequential enantioselective sensing of malate anion

Novel phenanthroline Schiff base fluorescent sensors L1 , L2 , and D1 were designed and synthesized. The sensing abilities of the compounds in the presence of metal cations (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ba²⁺, Ca²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Fe³⁺, Fe²⁺, Al³⁺, and Eu³⁺) were studied by UV‐vis and fluorescent spectroscopy. The compounds L1 , L2 , and D1 could act as Eu³⁺ ion turn‐off fluorescent sensors based on ligand‐to‐metal binding mechanism in DMSO‐H₂O solution (v/v = 1:1, 10 mM Tris, pH = 7.4). Additionally, the L1 –Eu³⁺ and D1 –Eu³⁺ complexes could be applied as turn‐on enantioselective sensors sensing of malate anion isomers with color changes. Furthermore, biological experiments using living PC‐12 cells demonstrated that L1 and D1 had excellent membrane permeability and could be used as effective fluorescent sensors for detecting Eu³⁺ and malate anion in living cells.     

Pyrazolone as a recognition site: Rhodamine 6G‐based fluorescent probe for the selective recognition of Fe3+ in acetonitrile–aqueous solution

Two novel Rhodamine–pyrazolone‐based colorimetric off–on fluorescent chemosensors for Fe³⁺ ions were designed and synthesized using pyrazolone as the recognition moiety and Rhodamine 6G as the signalling moiety. The photophysical properties and Fe³⁺‐binding properties of sensors L¹ and L² in acetonitrile–aqueous solution were also investigated. Both sensors successfully exhibit a remarkably ‘turn‐on’ response, toward Fe³⁺, which was attributed to 1: 2 complex formation between Fe³⁺ and L¹/L². The fluorescent and colorimetric response to Fe³⁺ can be detected by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Copyright © 2014 John Wiley & Sons, Ltd.     

Multifunctional peptide‐based fluorescent chemosensor for detection of Hg2+, Cu2+ and S2− ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl‐Gly‐His‐Gly‐Gly‐Trp‐COOH (D‐P5) was designed and synthesized efficiently using Fmoc solid‐phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N‐2‐hydroxyethylpiperazine‐N‐2‐ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a ‘turn‐on’ response to Hg²⁺ and a ‘turn‐off’ response to Cu²⁺. Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP‐5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D‐P5‐Hg and D‐P5‐Cu systems were also used to detect S^2? successfully based on the formation of ternary complexes. The LODs of D‐P5‐Hg and D‐P5‐Cu systems for S^2? were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.     

A rhodamine‐triazole fluorescent chemodosimeter for Cu2+ detection and its application in bioimaging

A rhodamine‐based fluorescent chemodosimeter rhodamine hydrazide‐triazole (RHT) tethered with a triazole moiety was developed for Cu²⁺ detection. In aqueous medium, the RHT probe exhibited high selectivity and sensitivity toward Cu²⁺ among other metal ions. The addition of Cu²⁺ triggered a fluorescence emission of RHT by 384‐fold (Φ = 0.33) based on a ring‐opening process and a subsequent hydrolysis reaction. Moreover, RHT also showed a selective colorimetric response toward Cu²⁺ from colorless solution to pink, readily observed with the naked eye. The limit of detection of RHT for Cu²⁺ was calculated to be 1 nM (0.06 ppb). RHT was successfully demonstrated to detect Cu²⁺ in Chang liver cells by confocal fluorescence microscopy.     

A colorimetric and fluorescent chemosensor for selective detection of Cu2+ based on a new diarylethene with a benzophenone hydrazone unit

A new photochromic diarylethene based on benzophenone hydrazone has been synthesized. Its photochromic and fluorescent properties changed upon alternating irradiation with UV /Vis light and adding Cu²⁺/EDTA in methanol, which showed that the diarylethene could be served as a colorimetric and fluorescent chemosensor for selective detection of Cu²⁺ based on internal charge transfer processes. The colorimetric and turn‐off fluorescent selective detection of Cu²⁺ was attributed to the 2:1 complex of the diarylethene and Cu²⁺. The binding constant (Ka ) was 1.53 × 10⁴ L mol^?1 and the limit of detection of the diarylethene for Cu²⁺ was calculated to be 1.45 × 10^?6 mol L^?1. In addition, the metal‐responsive photochromic behavior of diarylethene was applied successfully to the construction of a molecular logic circuit.     

Fe2+ binding on amyloid β‐peptide promotes aggregation

The metal ions Zn²⁺, Cu²⁺, and Fe²⁺ play a significant role in the aggregation mechanism of Aβ peptides. However, the nature of binding between metal and peptide has remained elusive; the detailed information on this from the experimental study is very difficult. Density functional theory (dft) (M06‐2X/6‐311++G (2df,2pd) +LANL2DZ) has employed to determine the force field resulting due to metal and histidine interaction. We performed 200 ns molecular dynamics (MD) simulation on Aβ_1‐42‐Zn²⁺, Aβ_1‐42‐Cu²⁺, and Aβ_1‐42‐Fe²⁺ systems in explicit water with different combination of coordinating residues including the three Histidine residues in the N‐terminal. The present investigation, the Aβ_1‐42‐Zn²⁺ system possess three turn conformations separated by coil structure. Zn²⁺ binding caused the loss of the helical structure of N‐terminal residues which transformed into the S‐shaped conformation. Zn²⁺ has reduced the coil and increases the turn content of the peptide compared with experimental study. On the other hand, the Cu²⁺ binds with peptide, β sheet formation is observed at the N‐terminal residues of the peptide. Fe²⁺ binding is to promote the formation of Glu22‐Lys28 salt‐bridge which stabilized the turn conformation in the Phe19‐Gly25 residues, subsequently β sheets were observed at His13‐Lys18 and Gly29‐Gly37 residues. The turn conformation facilitates the β sheets are arranged in parallel by enhancing the hydrophobic contact between Gly25 and Met35, Lys16 and Met35, Leu17 and Leu34, Val18 and Leu34 residues. The Fe²⁺ binding reduced the helix structure and increases the β sheet content in the peptide, which suggested, Fe²⁺ promotes the oligomerization by enhancing the peptide‐peptide interaction. Proteins 2016; 84:1257–1274. © 2016 Wiley Periodicals, Inc.     

Facile synthesis of anthracene-appended amino acids as highly selective and sensitive fluorescent Fe3+ ion sensors

We designed new fluorescent chemical sensors for Fe³⁺ ion detection, by conjugating amino acids as receptors into an anthracene fluorophore. The conjugates were synthesized in solid phase by Fmoc-chemistry. Fluorescence sensors containing Asp (1) and Glu (2) both had exclusive selectivity for Fe³⁺ in 100% aqueous solution and in a mixed organic–aqueous solvent system. Other metal ions did not interfere with the detection ability of the sensors for Fe³⁺. The sensors detect Fe³⁺ ions via a chelation-enhanced fluorescent quenching effect. The binding affinity, reversible monitoring, and pH sensitivity of the sensors were investigated. In addition, detection of fluoride ion among halide ions was done by a chemosensing ensemble method with 1–Fe³⁺ and 2–Fe³⁺ complexes.     

A N‐(2‐hydroxyethyl)piperazine dangled 2,5‐diphenyl‐1,3,4‐oxadiazole‐based fluorescent sensor for selective relay recognition of Cu2+ and sulfide in water

A new 2,5‐diphenyl‐1,3,4‐oxadiazole‐based derivative (L) was synthesized and applied as a highly selective and sensitive fluorescent sensor for relay recognition of Cu²⁺ and S^2? in water (Tris–HCl 10 mM, pH = 7.0) solution. L exhibits an excellent selectivity to Cu²⁺ over other examined metal ions with a prominent fluorescence ‘turn‐off’ at 392 nm. L interacts with Cu²⁺ through a 1:2 binding stoichiometry with a detection limit of 4.8 × 10^–7 M. The on‐site formed L–2Cu²⁺ complex exhibits excellent selectivity to S^2? with a fluorescence ‘off–on’ response via a Cu²⁺ displacement approach. Copyright © 2016 John Wiley & Sons, Ltd.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

A novel colorimetric fluorescence sensor for Fe3+ based on quinoline Schiff base

A novel fluorescent sensor bearing a quinoline and an anisidine moiety has been developed for highly selective detection of Fe³⁺, which shows photo‐induced electron transfer (PET) behavior induced by Fe³⁺. Binding of Fe³⁺ to the sensor induced the electron of C = N group transfer from quinoline to iron, the result exhibits fluorescent enhancement. With the features of easy synthesis, simple structural skeleton and excellent sensing ability, the newly synthesized chemosensor also applied as a highly selective fluorescent probe in complex samples containing various competitive metal ions. The probe could fulfill various needs in biological and environmental fields.     

Application of hybrid SiO2‐coated CdTe nanocrystals for sensitive sensing of Cu2+ and Ag+ ions

A new ion sensor based on hybrid SiO₂‐coated CdTe nanocrystals (NCs) was prepared and applied for sensitive sensing of Cu²⁺ and Ag⁺ for the selective quenching of photoluminescence (PL) of NCs in the presence of ions. As shown by ion detection experiments conducted in pure water rather than buffer solution, PL responses of NCs were linearly proportional to concentrations of Cu²⁺ and Ag⁺ ions < 3 and 7 uM, respectively. Much lower detection limits of 42.37 nM for Cu²⁺ and 39.40 nM for Ag⁺ were also observed. In addition, the NC quenching mechanism was discussed in terms of the characterization of static and transient optical spectra. The transfer and trapping of photoinduced charges in NCs by surface energy levels of CuS and Ag₂S clusters as well as surface defects generated by the exchange of Cu²⁺ and Ag⁺ ions with Cd²⁺ ion in NCs, resulted in PL quenching and other optical spectra changes, including steady‐state absorption and transient PL spectra. It is our hope that these results will be helpful in the future preparation of new ion sensors. Copyright © 2012 John Wiley & Sons, Ltd.     

Naked eye sensing of toxic metal ions in aqueous medium using thiophene‐based ligands and its application in living cells

Thiophene‐based diimine (R1) and monoimine (R2) were synthesized in a single step, and their cation binding affinity was tested using colorimetric and UV–vis spectral studies. R1 selectively shows a colorimetric turn‐on response for Pb²⁺, Hg²⁺ ions and colorimetric turn‐off with Sn²⁺ ions, and R2 shows visual response for Cu²⁺ and Hg²⁺ over other examined metal ions in aqueous medium. R1 forms 1:1 complex with Pb²⁺, Hg²⁺, and Sn²⁺ and exhibits fluorescence quenching, whereas R2 shows 2:1 complex with Hg²⁺, Cu²⁺ and shows fluorescence enhancement. The structural and electronic properties of the sensors and their metal complexes were also investigated using Density Functional Theory calculations. R2 was also successfully demonstrated as a fluorescent probe for detecting Cu²⁺ ions in living cells. Copyright © 2014 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorescent carbon nanoparticles obtained from charcoal via green methods and their application for sensing Fe3+ in an aqueous medium

Two green methods (microwave and hydrothermal) were employed for the preparation of water dispersible fluorescent carbon nanoparticles (CNPs) from activated charcoal. Microwave and hydrothermally synthesized carbon nanoparticles, (MW‐CNPs) and (HT‐CNPs), respectively were characterized by microscopic and spectroscopic techniques. A detailed study of their fluorescence characteristics was made. MW‐CNPs and HT‐CNPs were tested for metal ion selectivity in aqueous medium. MW‐CNPs showed selectivity for Fe³⁺ among the tested metal ions and important studies such as for interference, linear range and limit of detection were carried out. The application of MW‐CNPs for detection of Fe³⁺ in water was demonstrated.     

Three colorimetric and off–on fluorescent chemosensors for Fe3+ in aqueous media

Three Rhodamine B derivatives were synthesized and characterized by ESI‐MS, NMR, HR‐MS and IR. The probes exhibit high selectivity and sensitivity towards Fe³⁺ over other metal ions in CH₃CN–water. Upon the addition of Fe³⁺, the spirocyclic ring of the probe was opened and a significant enhancement of visible color and fluorescence within the range of 540–700 nm was observed. The colorimetric and fluorescent response to Fe³⁺ can be conveniently detected even by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Job's plot, fluorescence titration and MS indicated the formation of 1:2 complexes between the probes and Fe³⁺. The reversibility of the reaction establishes the potential of these probes as chemosensors for Fe³⁺ detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Two new rhodamine‐based fluorescent chemosensors for Fe3+ in aqueous solution

Two new rhodamine‐based fluorescent probes were synthesized and characterized by NMR, high resolution mass spectrometer (HR‐MS) and IR. The probes displayed a high selectivity for Fe³⁺ among environmentally and biologically relevant metal ions in aqueous solution (CH₃OH–H₂O = 3 : 2, v/v). The significant changes in the fluorescence color could be used for naked‐eye detection. Job's plot, IR and ¹H NMR indicated the formation of 1: 1 complexes between sensor 1 and Fe³⁺. The reversibility establishes the potential of both probes as chemosensors for Fe³⁺ detection. The probe showed highly selectivity in aqueous solution and could be used over the pH range between 5 and 9. A simple paper test‐strip system for the rapid monitoring of Fe³⁺ was developed, indicating its convenient use in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile synthesis,cytotoxicity and bioimaging of Fe3+ selective fluorescent chemosensor

The designing and development of fluorescent chemosensors have recently been intensively explored for sensitive and specific detection of environmentally and biologically relevant metal ions in aqueous solution and living cells. Herein, we report the photophysical results of alanine substituted rhodamine B derivative 3 having specific binding affinity toward Fe³⁺ with micro molar concentration level. Through fluorescence titration at 599 nm, we were confirmed that ligand 3 exhibited ratiometric fluorescence response with remarkable enhancement in emission intensity by complexation between 3 and Fe³⁺ while it appeared no emission in case of the competitive ions (Sc³⁺, Yb³⁺, In³⁺, Ce³⁺, Sm³⁺, Cr³⁺, Sn²⁺, Pb²⁺, Ni²⁺, Co²⁺, Cu²⁺, Ba²⁺, Ca²⁺, Mg²⁺, Ag⁺, Cs⁺, Cu⁺, K⁺) in aqueous/methanol (60:40, v/v) at neutral pH. However, the fluorescence as well as colorimetric response of ligand–iron complex solution was quenched by addition of KCN which snatches the Fe³⁺ from complex and turn off the sensor confirming the recognition process was reversible. Furthermore, bioimaging studies against L-929 cells (mouse fibroblast cells) and BHK-21 (hamster kidney fibroblast), through confocal fluorescence microscopic experiment indicated that ligand showed good permeability and minimum toxicity against the tested cell lines.     

A novel fluorescent probe based on rhodamine hydrazone derivatives bearing a thiophene group for Al3+

In the present work, a novel 5‐methyl‐thiophene‐carbaldehyde‐functionalized rhodamine 6G Schiff base (RA) was designed and easily prepared as an Al³⁺ fluorescent and colorimetric probe, which could selectively and sensitively detect Al³⁺ by showing enhanced fluorescence emission. Meanwhile distinct color variation from colorless to pink also provided ‘naked eye’ detection of Al³⁺, due to the ring spirolactam opening of the rhodamine derivative. Other metal ions (including K⁺, Mg²⁺, Na⁺, Ba²⁺, Mn²⁺, Cd²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Hg²⁺, Co²⁺, Li⁺, Sr²⁺ and Cu²⁺) could only induce limited interference. The detection limit of the fluorescent probe was estimated to be 4.17 × 10^?6 M, the binding constant of the RA–Al³⁺ complex was 1.4 × 10⁶ M^?1. Moreover, this fluorescent probe RA possessed high reversibility. As aluminum is a ubiquitous metal in nature and plays vital roles in many biological processes, this chemosensor could be explored for biological study applications. Copyright © 2015 John Wiley & Sons, Ltd.     

A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.