Spectral‐converting study of Ba9–3(m+n)/2ErmYbnY2Si6O24 (m = 0.005 – 0.2, n = 0 – 0.3) orthosilicate phosphors

Optical materials composed of Ba_9–3(m+n)/2Er_mYb_nY₂Si₆O₂₄ (m = 0.005–0.2, n = 0–0.3) were prepared using a solid‐state reaction. The X‐ray diffraction patterns of the obtained phosphors were examined to index the peak positions. The photoluminescence (PL) excitation and emission spectra of the Er³⁺‐activated phosphors and the critical emission quenching as a function of Er³⁺ content in the Ba_9–3m/2Er_mY₂Si₆O₂₄ structure were monitored. The spectral conversion properties of Er³⁺ and Er³⁺–Yb³⁺ ions doped in Ba₉Y₂Si₆O₂₄ phosphors were elucidated under diode‐laser irradiation at 980 nm. Up‐conversion emission spectra and the dependence of the emission intensity on pump power for the Ba_8.55Er_0.1Yb_0.2Y₂Si₆O₂₄ phosphor were investigated. The desired up‐conversion of the emitted light, which passed through the green, yellow, orange and red regions of the spectrum, was achieved through the use of appropriate Er³⁺ and/or Yb³⁺ concentrations in the host structure and 980 nm excitation light. The up‐conversion mechanism in the phosphors is described by an energy‐level schematic. Copyright © 2015 John Wiley & Sons, Ltd.     

Over 104-fold amplified upconversion luminescence of lanthanide nanocrystals through optical oscillator-like system

Recently, lanthanide (Ln) luminescent nanocrystals have attracted increasing attention in various fields such as biomedical imaging, lasers, and anticounterfeiting. However, due to the forbidden 4f–4f transition of lanthanide ions, the absorption cross-section and luminescence brightness of lanthanide nanocrystals are limited. To address the challenge, we constructed an optical oscillator-like system to repeatedly simulate lanthanide nanocrystals to enhance the absorption efficiency of lanthanide ions on excitation photons. In this optical system, the upconversion luminescence (UCL) of Tm³⁺ emission of ~450 nm excited by a 980 nm laser can be amplified by a factor beyond 10⁴. The corresponding downshifting luminescence of Tm³⁺ at 1460 nm was enhanced by three orders of magnitude. We also demonstrated that the significant luminescence enhancement in the designed optical oscillator-like system was general for various lanthanide nanocrystals including NaYF₄:Yb³⁺/Ln³⁺, NaErF₄@NaYF₄ and NaYF₄:Yb³⁺/Ln³⁺@NaYF₄:Yb³⁺@NaYF₄ (Ln = Er, Tm, Ho) regardless of the wavelengths of excitation sources (808 and 980 nm). The mechanism study revealed that both elevated laser power in the optical system and multiple excitations on lanthanide nanocrystals were the main reason for the luminescence amplification. Our findings may benefit the future development of low-threshold upconversion and downshifting luminescence of lanthanide nanocrystals and expand their applications.     

Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and up‐conversion luminescence properties of LaOBr:Yb3+/Er3+ nanofibers via electrospinning

LaOBr:Yb³⁺/Er³⁺ nanofibers were synthesized for the first time by calcinating electrospun PVP/[La(NO₃)₃ + Er(NO₃)₃ + Yb(NO₃)₃ + NH₄Br] composites. The morphology and properties of the final products were investigated in detail using scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), X‐ray diffractometry (XRD) and fluorescence spectroscopy. The results indicate that LaOBr:Yb³⁺/Er³⁺ nanofibers are tetragonal in structure with a space group of P4/nmm. The diameter of LaOBr:Yb³⁺/Er³⁺ nanofibers is ~ 147 nm. Under the excitation of a 980‐nm diode laser, LaOBr:Yb³⁺/Er³⁺ nanofibers emit strong green and red up‐conversion emission centering at 519, 541 and 667 nm, ascribed to the ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴ F_9/2 → ⁴I_15/2 energy‐level transitions of Er³⁺ ions, respectively. The up‐conversion luminescent mechanism of LaOBr:Yb³⁺/Er³⁺ nanofibers is advanced. Moreover, near‐infrared emission of LaOBr:Yb³⁺/Er³⁺ nanofibers is obtained under the excitation of a 532‐nm laser. The formation mechanism of LaOBr:Yb³⁺/Er³⁺ nanofibers is proposed. LaOBr:Yb³⁺/Er³⁺ nanofibers could be important up‐conversion luminescent materials. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive detection of sulfide ions in red region based on luminescence resonance energy transfer between upconversion nanoparticles and dye‐670

Many sulfides are toxic substances that easily harm the respiratory tract, therefore affecting respiratory function or damaging other organs of the body, leading to its failure. Therefore, there is a pressing need to develop methods for sensitive detection of sulfur ions (S^2?). Based on luminescence resonance energy transfer (LRET) theory, we report the construction of a near‐infrared (NIR) excitation luminescence probe using NaGdF₄:Yb³⁺,Er³⁺@NaYF₄ upconversion nanoparticles (UCNPs) as the donor and dye‐670 as the receptor for detection of S^2?. When UCNPs and dye‐670 molecules were combined using ligand exchange and electrostatic attraction, LRET occurred and UCNP luminescence was quenched. When S^2? was added to the system, sulfide ions were able to destroy the double bond of the dye, inhibiting LRET and restoring UCNP luminescence. Under optimum condition, the linear range of S^2? detection was 0.65–18.2 μM, and the detection limit was 34.2 nM. This method was applied for determination of S^2? in water with satisfactory results.     

Thermoluminescence dosimetric attributes of Yb3+-doped BaO–ZnO–LiF–B2O3 glass material after Er3+ co-doping

Motivated by our previous study on Sm³⁺ ions as thermoluminescence (TL) sensitizers to the BaO–ZnO–LiF–B₂O₃–Yb₂O₃ glass system, in the current study we examined the effect of Er³⁺ ion co-doping on the TL characteristics of this glass system. The 4f–4f electronic transitions of the Er³⁺ and Yb³⁺ ions were confirmed via the optical absorption spectrum. Notably, the use of Yb³⁺–Er³⁺ ions failed to improve the TL intensity, sensitivity, and trap density. However, they enabled the glass system to function as an activator–quencher system. The linearity range and effective atomic number remained unaffected after co-doping. In addition, the problem of anomalous fading caused a remnant signal of just 58% after a week of storage of the Yb³⁺ monodoped glass. This was resolved by the optimum co-doping of Er³⁺ ions to achieve an 89% signal. The co-doping of Er³⁺ ions to the BaO–ZnO–LiF–B₂O₃–Yb₂O₃ glass system regulated its thermal stability and therefore supplemented its potential for radiation monitoring in food processing and retrospective dosimetry.     

Pure red upconverted and near-infrared luminescence properties of Er3+-doped SnO2 nanocrystals for lighting applications

Tin oxide (SnO₂) nanocrystalline powders doped with erbium ion (Er³⁺) in different molar ratios (0, 3, 5, and 7 mol%) were prepared using a solid-state reaction technique. These samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible absorption, visible upconversion, and near-infrared luminescence techniques. XRD analysis revealed the tetragonal rutile structure of SnO₂ and the average crystallite size was about 32 nm. From Tauc's plots, it was confirmed that the substitution of Er³⁺ ions into the SnO₂ host lattice resulted in the narrowing its band gap. Optical absorption bands at 520 and 654 nm correspond to the 4f electron transitions of Er³⁺ further confirming visible light absorption. Infrared luminescence spectra showed a broad band centred at 1536 nm which is assigned to the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺. Visible upconverted emission spectra under 980 nm excitation exhibit a strong red luminescence with a main peak at 672 nm which is attributed to the ⁴F_9/2 → ⁴I_15/2 transition of Er³⁺. Power-dependent upconversion spectra confirmed that two photons participated in the upconversion mechanism. Enhancement in the intensities of both visible and infrared luminescence was observed when raising the concentration. The results pave the way for the potential applications of these nanocrystalline powders in energy harvesting applications such as infrared light upconverting layer in solar cells, light emitting diodes, infrared broadband sources and amplifiers, and biological labelling.     

Synthesis and characterization of a stable dispersion of multifunctional Gd2O3:Er,Yb in polyvinyl alcohol

A stable dispersion of multifunctional Gd₂O₃:Er,Yb phosphor in polyvinyl alcohol (PVA) was synthesized by varying the concentration of Yb³⁺ ions. It had a strong ultraviolet–visible‐near infrared (UV–vis) upconversion emission and applications in temperature and magnetic field sensors (e.g., nano‐heaters), as well as potential use in bioleveling and bioimaging. Stability of the dispersion was found to strongly depend on the mixing process of the powder in the polymer solution. Spherical shaped nanoparticles in cubic phase of ~ 43 nm diameter were synthesized and characterized by X‐ray diffraction; results were confirmed by scanning electron microscopy (SEM). Fourier transform infrared sspectroscopy (FT‐IR) and thermal analysis supported the presence of PVA. NIR pumping produced strong UC emission bands in the red and green regions extending up to very high UV (240 nm). This method provides an alternative for synthesizing a highly UC‐efficient non‐agglomerated pure transparent dispersion from various efficient phosphors for biological applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoluminescence properties of rare‐earth‐doped (Er3+,Yb3+) Y2O3 nanophosphors by a combustion synthesis method

In this work, we report the synthesis of Y₂O₃:Er³⁺, Y₂O₃:Yb³⁺ and Y₂O₃:Er³⁺,Yb³⁺ nanophosphors by the combustion synthesis method using urea as fuel. The doping agents were incorporated in the form of erbium nitrate and ytterbium nitrate. X‐Ray diffraction (XRD) patterns revealed that the synthesized particles have a body‐centered cubic structure with space group Ia‐3. The photoluminescence (PL) properties were investigated after UV and infrared irradiation at room temperature. A strong characteristic emission of Er³⁺ and Yb³⁺ ions was identified, and the influence of doping concentration on the PL properties was systematically studied. Energy transfer from Yb³⁺ to Er³⁺ ions was observed in Y₂O₃ nanophosphors. The obtained result may be useful in potential applications such as bioimaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence properties of pure and rare-earth-doped ZrO2 prepared by Pechini-type sol–gel

In this article, photoluminescence (PL) and thermoluminescence (TL) properties of ZrO₂, ZrO₂:Dy³⁺, ZrO₂:Dy³⁺–Gd³⁺, ZrO₂:Dy³⁺–Yb³⁺, ZrO₂:Dy³⁺–Er³⁺, and ZrO₂:Dy³⁺–Sm³⁺ phosphors synthesized by the Pechini method were investigated. The crystal structure, thermal properties, morphology, PL and TL properties were investigated using X-ray powder diffraction (XRD), differential thermal analysis/thermogravimetric analysis (DTA/TGA), scanning electron microscopy (SEM), PL and TL, respectively. The room temperature emission bands corresponding to ⁴F_9/2 → ⁶H_J (J = 9/2, 11/2, 13/2 and 15/2) transitions of Dy³⁺ ions were measured. The phosphors were analysed using T_m–T_STOP, variable dose, and computerized glow curve fitting methods. Reusability, dose–response, and fading characteristics were investigated. The phosphors have a natural TL emission that vanished by heating treatment. Moreover, new peaks with similar properties to the natural emissions were observed after high-dose irradiation and long-term fading experiments. The glow curves of the phosphors have 13 individual peaks and many low- and high-temperature satellite peaks. The origin of the peaks is ZrO₂ host material and doping with rare-earth ions (Gd³⁺, Dy³⁺, Yb³⁺, Er³⁺ and Sm³⁺) does not lead to a new glow peak. The dopants cause drastic changes in individual peak intensities of ZrO₂.The initial fading rates of all the phosphors are relatively fast, but they slow down as time goes on.     

Nd3+‐Yb3+/Nd3+‐Yb3+‐Li+ co‐doped Gd2O3 phosphors for up and down conversion luminescence

Frequency up‐conversion (UC) emission from the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped gadolinium oxide (Gd₂O₃) phosphors prepared by the solution combustion technique in the visible range have been studied by using 980 nm near infrared (NIR) laser diode excitation. The crystalline structure and formation of the cubic phase has been confirmed with the help of X‐ray diffraction (XRD) studies. XRD peak shifts have been found towards the lower diffraction angle side in the case of the Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. Surface morphology and particle size information have been observed by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis. Down‐conversion emission study under 351 nm excitation in the visible region for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors has been performed. The UC emission bands lying in the green and red region arising from the Nd³⁺ ions have been enhanced by ~260 times, ~113 times due to incorporation of Li⁺ ions in the Nd³⁺‐Yb³⁺ co‐doped phosphors. Photometric characterization has been done for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. The present study suggests the capability of the synthesized phosphors in near‐infrared (NIR) to visible upconverter and luminescent device applications.     

Investigation of UV‐emitting Gd3+‐doped LiCaBO3 phosphor

Incorporating the Gd³⁺ rare earth ion in the LiCaBO₃ host lattice resulted in narrow‐band UV‐B emission peaking at 315 nm, with excitation at 274 nm. The LiCaBO₃:Gd³⁺ phosphor was synthesized via the solid‐state diffusion method. The structural, morphological and luminescence properties of this phosphor were characterized by X‐ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. Electron paramagnetic resonance (EPR) characterization of the as‐prepared phosphors is also reported here. XRD studies confirmed the crystal formation and phase purity of the prepared phosphors. A series of different dopant concentrations was synthesized and the concentration‐quenching effect was studied. Critical energy transfer distance between activator ions was determined and the mechanism governing the concentration quenching is also reported in this paper. Copyright © 2015 John Wiley & Sons, Ltd.     

Visible‐near‐infrared luminescent lanthanide ternary complexes based on beta‐diketonate using visible‐light excitation

We used the synthesized dinaphthylmethane (Hdnm) ligand whose absorption extends to the visible‐light wavelength, to prepare a family of ternary lanthanide complexes, named as [Ln(dnm)₃phen] (Ln = Sm, Nd, Yb, Er, Tm, Pr). The properties of these complexes were investigated by Fourier transform infrared (FT‐IR) spectroscopy, diffuse reflectance (DR) spectroscopy, thermogravimetric analyses, and excitation and emission spectroscopy. Generally, excitation with visible light is much more advantageous than UV excitation. Importantly, upon excitation with visible light (401–460 nm), the complexes show characteristic visible (Sm³⁺) as well as near‐infrared (Sm³⁺, Nd³⁺, Yb³⁺, Er³⁺, Tm³⁺, Pr³⁺) luminescence of the corresponding lanthanide ions, attributed to the energy transfer from the ligands to the lanthanide ions, an antenna effect. Now, using these near‐infrared luminescent lanthanide complexes, the luminescent spectral region from 800 to 1650 nm, can be covered completely, which is of particular interest for biomedical imaging applications, laser systems, and optical amplification applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced green emissions of Er3+/Yb3+ co‐doped Gd2(MoO4)3 by co‐excited up‐conversion processes

Improving the emission from rare earth ions doped materials is of great importance to broaden their application in bio‐imaging, photovoltaics and temperature sensing. The green emissions of Gd₂(MoO₄)₃:Er³⁺/Yb³⁺ powder upon co‐excitation with 980 and 808 nm lasers were investigated in this paper. Distinct enhancement of green emissions was observed compared with single laser excitation. Based on the energy level structure of Er³⁺, the enhancement mechanism was discussed. Moreover, the result of temperature‐dependent enhancement revealed that the enhancement factor reached its maximum (2.5) as the sample heated to 120°C, which is due to the competition of two major thermal effects acting in the co‐excited up‐conversion processes. In addition, the same enhancement of green emissions was also observed in Gd₂(MoO₄)₃:Er³⁺ powder and NaYF₄:Er³⁺/Yb³⁺ powder.     

The structure and luminescence properties of Mn2+/Eu2+/Er3+‐doped MgO‐Ga2O3‐SiO2 glasses and glass‐ceramics

The MgO–Ga₂O₃–SiO₂ glasses and glass‐ceramics samples doped with Eu²⁺/Mn²⁺/Er³⁺ and heated in reductive atmosphere were prepared by the sol–gel method. The structure, morphology and the luminescence properties were studied using X‐ray diffraction, high‐resolution transmission electron microscope, fluorescence spectra, and up‐conversion emission. The luminescence characteristics of doped ions could be influenced by temperature and matrix component. The characteristic emission of Mn²⁺, Eu²⁺ and Er³⁺ were seen and the energy transfer efficiency from Eu²⁺ to Mn²⁺ was enhanced as Mn²⁺ concentration was increased. In addition, the two‐photon process was determined for the Er³⁺‐doped samples.     

Facile synthesized NaGdF4:Yb,Er peanut-shaped,highly biocompatible,colloidal upconversion nanospheres

A facile method was used for the synthesis of peanut-shaped very emissive NaGdF₄:Yb, Er upconversion nanospheres (UCNSs) at lower temperatures with uniform size distribution. Crystallographic structure, phase purity, morphology, thermal robustness, biocompatibility, colloidal stability, surface chemistry, optical properties, and luminesce properties were explored by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), zeta potential, thermogravimetric/differential thermal analysis (TGA/DTA), Fourier-transform infrared (FTIR), ultraviolet (UV)-visible and photoluminescence spectroscopic tools. XRD pattern verified the construction of a single-phase, highly-crystalline NaGdF₄ phase with a hexagonal structure. Peanut-shaped morphology of the sample was obtained from SEM micrographs which were validated from high-resolution TEM images, to have an equatorial diameter of 170 to 200 nm and a length of 220 to 230 nm, with irregular size, monodispersed, porous structure, and rough surface of the particles. The positive zeta potential value exhibited good biocompatibility along with high colloidal stability as observed from the absorption spectrum. The prepared UCNSs revealed high dispersibility, irregular size peanut-shaped morphology, rough surface, good colloidal stability, and excellent biocompatibility in aqueous media. A hexagonal phase NaGdF₄ doped with ytterbium (Yb) and erbium (Er) UCNSs revealed the characteristics of highly dominant emissions located at 520–525, 538–550, and 659–668 nm corresponding to the ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 transition of Er³⁺ ions, respectively, as a result of energy transfer from sensitizer Yb³⁺ ion to emitter Er³⁺ ion.     

Insights into the discrepant luminescence for BaSiO3:Eu2+ phosphors prepared by solid‐state reaction and precipitation reaction methods

Two synthesis routes, solid‐state reaction and precipitation reaction, were employed to prepare BaSiO₃:Eu²⁺ phosphors in this study. Discrepancies in the luminescence green emission at 505 nm for the solid‐state reaction method sample and in the yellow emission at 570 nm for the sample prepared by the precipitation reaction method, were observed respectively. A detail investigation about the discrepant luminescence of BaSiO₃:Eu²⁺ phosphors was performed by evaluation of X‐ray diffraction (XRD), photoluminescence (PL)/photoluminescence excitation (PLE), decay time and thermal quenching properties. The results showed that the yellow emission was generated from the BaSiO₃:Eu²⁺ phosphor, while the green emission was ascribed to a small amount of Ba₂SiO₄:Eu²⁺ compound that was present in the solid‐state reaction sample. This work clarifies the luminescence properties of Eu²⁺ ions in BaSiO₃ and Ba₂SiO₄ hosts.     

Heterobinuclear Zn‐Ln (Ln = La,Nd, Eu,Gd, Tb,Er and Yb) complexes based on asymmetric Schiff‐base ligand: synthesis,characterization and photophysical properties

With a novel asymmetric Schiff‐base zinc complex ZnL (H₂L = N‐(3‐methoxysalicylidene)‐N′‐(5‐bromo‐3‐methoxysalicylidene)phenylene‐1,2‐diamine), obtained from phenylene‐1,2‐diamine, 3‐methoxysalicylaldehyde and 5‐bromo‐3‐methoxysalicylaldehyde, as the precursor, a series of heterobinuclear Zn‐Ln complexes [ZnLnL(NO₃)₃(CH₃CN)] (Ln = La, 1; Ln = Nd, 2; Ln = Eu, 3; Ln = Gd, 4; Ln = Tb, 5; Ln = Er, 6; Ln = Yb, 7) were synthesized by the further reaction with Ln(NO₃)₃·6H₂O, and characterized by Fourier transform‐infrared, fast atom bombardment mass spectroscopy and elemental analysis. Photophysical studies of these complexes show that the strong and characteristic near‐infrared luminescence of Nd³⁺, Yb³⁺and Er³⁺ with emissive lifetimes in the microsecond range has been sensitized from the excited state of the asymmetric Schiff‐base ligand due to effective intramolecular energy transfer; the other complexes do not show characteristic emission due to the energy gap between the chromophore and lanthanide ions. Copyright © 2012 John Wiley & Sons, Ltd.