Utility of a xanthene-based dye for determination of nilotinib using two spectroscopic approaches. Applications to bulk powder,capsules, and spiked human plasma

Novel, selective, facile, and precise spectroscopic approaches were validated to determine nilotinib hydrochloride, a tyrosine kinase inhibitor used to treat patients with chronic myeloid leukemia. These approaches depend on the reaction of the tertiary amine group of nilotinib with erythrosine B in the Britton–Robinson buffer at pH 4. Method I, depends on measuring the absorbance of the formed complex at 551 nm. The absorbance concentration plot showed linearity over the concentration range of 1.0 to 9.0 μg/ml. Method II, involved the measurement of the quenching of the native fluorescence of erythrosine B by adding nilotinib in an acidic medium. The fluorescence quenching of erythrosine B was measured at 549 nm after excitation at 528 nm. This approach showed excellent linearity in the concentration range of 0.04 to 0.7 μg/ml. The limit of detection values for Method I and Method II were 0.225 and 0.008 μg/ml, respectively, while the limit of quantitation values for Method I and Method II were 0.68 and 0.026 μg/ml, respectively. To get the optimal conditions, factors that may affect the formation of the ion-pairing complex were thoroughly examined. The two approaches were carefully validated following the International Conference of Harmonization (ICH Q2R1) guidelines. Statistical assessment of the results achieved using the suggested and previously published comparison approaches showed no significant difference. The approaches were successful in determining nilotinib in a pharmaceutical dosage form as well as spiked human plasma samples. The eco-friendly properties of the methods were evaluated by three different tools.     

Determination of sinefungin in rat plasma by high-performance liquid chromatography

A reversed-phase high-performance liquid chromatographic method for the determination of sinefungin, a new antiprotozoal drug, in rat plasma has been developed and validated. Sample preparation was performed at 4°C by deproteinization with acetonitrile. Vidarabine was used as an internal standard. Both sinefungin and vidarabine were separated on a C₁₈ column with a mobile phase of ammmonium dihydrogenphosphate-acetonitrile (95:5, v/v) and detected by ultraviolet absorbance at 260 nm. Recoveries of sinefungin from plasma were 75 ± 3.2% and 81 ± 4.8% following dosage at concentrations of 10 μg/ml and 30 μ/ml, respectively. Using 25- μl of rat plasma the limit of quantitation was 1 μg/ml sinefungin, and the assay was linear from 1 to 30 μg/ml. This method appears sensitive enough to be used in further pharmacokinetic studies of sinefungin in animal models.     

Fast concurrent determination of guaifenesin and pholcodine in formulations and spiked plasma using first derivative synchronous spectrofluorimetric approach

Guaifenesin and pholcodine are frequently co-formulated in certain dosage forms. A new fast first derivative synchronous spectrofluorometric method has been used for their simultaneous analysis in mixtures. Here, first derivative synchronous spectrofluorometry enabled the successful simultaneous estimation of guaifenesin at 283 nm and pholcodine at 275 nm using a wavelength difference (Δλ) of 40 nm. The method was fully validated following International Council of Harmonization guidelines. For guaifenesin and pholcodine, linearity was determined within the corresponding ranges of 0.05–0.30 and 0.10–6.0 μg/ml. The two drugs were effectively analyzed using the developed approach in their respective formulations, and the results showed good agreement with those attained using reference methods. The method demonstrated excellent sensitivity, with detection limits down to 0.007 and 0.030 μg/ml and quantitation limits of 0.020 and 0.010 μg/ml for guaifenesin and pholcodine, respectively. Therefore, the procedure was successful in determining these drugs simultaneously in vitro in spiked plasma samples and syrup dosage form. The developed methodology also offered an environmentally friendly advantage by utilizing water as the optimal diluting solvent throughout the whole work. Different greenness approaches were investigated to ensure the method’s ecofriendly properties.     

First‐derivative synchronous spectrofluorimetric method for estimation of losartan potassium and atorvastatin in their pure forms and in tablets

Losartan potassium (LOS) and atorvastatin (ATR) are used in combination for long‐term treatment of stroke and for treatment of hypertension with high‐level cholesterol. Both drugs were simultaneously determined and validated using a novel, easy, fast, and economical first‐derivative synchronous fluorescence spectroscopic method. Methanol was used as the solvent for both drugs at a Δλ 80 nm and with a scanning rate of 600 nm/min. Peaks were determined as at 288.1 nm and 263.6 nm for LOS and ATR, respectively. The proposed method was validated according to International Conference on Harmonization guidelines and, subsequently, the developed method was applicable to the analysis of the two compounds in their different formulations without interference from each other. Amplitude–concentration plots were rectilinear over the concentration ranges 1.0–10.0 μg/ml and 0.5–5.0 μg/ml for LOS and ATR, respectively. Detection limits were found to be 0.096 μg/ml and 0.030 μg/ml and quantitation limits were 0.291 μg/ml and 0.093 μg/ml for LOS and ATR, respectively. The proposed method was successfully applied to the analysis of both compounds in synthetic mixtures and in laboratory‐prepared tablets. These results were in accordance with the results acquired using the comparison method, high‐performance liquid chromatography.     

The convenient use of fluorescamine for spectrofluorimetric determination of midodrine hydrochloride in pure form and its tablets formulation: Application to content uniformity testing

A novel sensitive and simple spectrofluorimetric method was developed then validated for determination of midodrine in both its authentic pure form and its tablets. This method is based on the reaction between midodrine's aliphatic primary amine moiety with fluorescamine reagent, using borate buffer at pH 7.8 and yielding a highly fluorescent product whose fluorescence intensity was measured at 462 nm after excitation at 388 nm. This method represents the first attempt for determination of midodrine spectrofluorimetrically. A calibration curve was constructed showing that the linear range was 0.2–3.0 μg/ml. The limit of detection and limit of quantitation values were 0.06 and 0.19 μg/ml respectively. The correlation coefficient (r) and the determination coefficient (r²) values were 0.9992 and 0.9984 respectively. The proposed method was validated according to ICH guidelines and successfully applied for determination of midodrine in its tablets with an overall % recovery of 99.56 ± 0.95. Finally, the presented method was adapted to study the content uniformity test according to United States Pharmacopeia guidelines.     

Micellar-emphasized simultaneous determination of ivabradine hydrochloride and felodipine using synchronous spectrofluorimetry

A sensitive and green micellar spectrofluorimetric approach was applied for the simultaneous estimation of ivabradine hydrochloride (IVB) and felodipine (FLD) in the ng/ml concentration range. The approach depended on measuring the first derivative synchronous peak amplitude (¹D) of both drugs at ∆λ = 60 nm in a Tween-80 micellar system. The method was rectilinear alongside the concentration ranges 0.02–0.4 μg/ml and 0.05–1.0 μg/ml at 269.5 nm and 378.5 nm for IVB and FLD, respectively. The proposed method was validated by following the International Council for Harmonization guidelines. The method was successfully applied without interference for laboratory-prepared synthetic mixtures, single pharmaceutical preparations, and within spiked biological fluids with acceptable percentage recoveries. A comparison of the performance of the suggested method with other methods, showed no discrepancy. The method’s ecofriendly property evaluated using three different tools, confirming an excellent green method.     

Determination of amdinocillin in plasma and urine by high-performance liquid chromatography

A rapid, sensitive and specific high-performance liquid chromatographic (HPLC) assay was developed for the determination of amdinocillin (formerly mecillinam) in human plasma and urine. The assay is performed by direct injection of a plasma protein-free supernatant or a dilution of urine. A 10-μm μBondapak phenyl column with an eluting solvent of water—methanol—1 M phosphate buffer, pH 7 (70:30:0.5) was used, with UV detection of the effluent at 220 nm. Azidocillin potassium salt [potassium-6-(d-(-)-α-azidophenyacetamido)-penicillanate] was used as the internal standard and quantitation was based on peak height ratio of amdinocillin to that of the internal standard. The assay has a recovery of 74.4 ± 6.3% (S.D.) in the concentration ranges of 0.1–20 μg per 0.2 ml of plasma with a limit of detection equivalent to 0.5 μg/ml plasma. The urine assay was validated over a concentration range of 0.025–5 mg/ml of urine, and has a limit of detection of 0.025 mg/ml (25 μg/ml) using a 0.1-ml urine specimen per assay.The assay was applied to the determination of plasma and urine concentrations of amdinocillin following intravenous administration of a 10 mg/kg dose of amdinocillin to two human subjects. The HPLC and microbiological assays were shown to correlate well for these samples.     

Identification and determination of pirlimycin residue in bovine milk and liver by high-performance liquid chromatography-thermospray mass spectrometry

Determinative and confirmatory methods of analysis for pirlimycin (I) residue in bovine milk and liver have been developed based on HPLC-thermospray (TSP) MS. Milk sample preparation consisted of precipitating the milk proteins with acidified acetonitrile followed by a solvent partitioning with a mixture of n-butyl chloride and hexane, extraction of I from the aqueous phase into methylene chloride (MC), and solid-phase extraction clean-up. For liver, samples (2 g) were extracted with 0.25% trifluoroacetic acid in acetonitrile. The aqueous component was released from the organic solvent with n-butyl chloride. The aqueous solution was reduced in volume by evaporation, basified with ammonium hydroxide, then extracted with MC. The MC was evaporated to dryness and the dried residue reconstituted in 2.0 ml of 0.1 M ammonium acetate for analysis. A chromatographically resolved stereoisomer of I with TSP-MS response characteristics identical to I was used as an internal standard (I.S.) for quantitative analysis based on the ratio of peak areas of I to I.S. in the protonated molecular-ion chromatogram at m/z 411.2.The method for milk was validated by the analysis of control milk samples spiked with I at concentrations from 0.05 to 0.8 μg/ml. The overall recovery of pirlimycin across this concentration range was 95.4% ± 8.7%. The limit of quantitation (LOQ) and limit of confirmation (LOC) of the method were validated to be 0.05 μg/ml and 0.10 μg/ml, respectively.The method for liver was validated by the analysis of control liver samples spiked with I at concentrations ranging from 0.025 to 1.0 μg/g. The overall recovery of pirlimycin was 97.6% ± 5.1% in this concentration range. The validated limit of quantitation (LOQ) and limit of confirmation (LOC) of the method were 0.025 μg/g and 0.10 μg/g, respectively.Four diagnostic ions for I were monitored for confirmation: the pseudo-molecular ions (M + H)⁺ at m/z 411.2 (³⁵Cl) and m/z 413.2 (³⁷Cl), and fragment ions at m/z 375.2 and 158.1. Confirmatory criteria were defined for these assays.     

Flame atomic emission spectrometric determination of aluminium in a bovine blood plasma matrix

A flame atomic emission spectrometric method, is described for the determination of aluminium in bovine blood plasma matrices. Plasma samples are wet-digested and solutions are aspirated into a conventional nitrous oxide-acetylene flame. Analyte emission is monitored at 396.15 nm with corrections for background emission being obtained from measurements several tenths nm on both sides of the aluminium line. The mean recovery of 0.3–5 μg/ml aluminium added to model solutions containing 500–5000 μg Na/ml, 50–1000 μg Ca/ml, 2000–5000 μg K/ml, or simulated plasma digests containing Na, K, and Ca was 100,6% (SD = 10.9, df = 60); the mean recovery of 0.3, 0.5, and 1.0 μg/ml aluminium added to blood plasma before digestion was 94.3% (SD = 9.8, df = 33) indicating no serious interferences. For standard solutions, the detection limit (signal: peak-to-peak noise = 1) was 0.02 μg/ml by flame emission, and 0.12 μg/ml by atomic absorption measurements with the same instrument. A sample taken through the analytical procedure, gave a detection limit of 0.05 μg/ml suggesting the submicrogram per milliliter region as the lower practical limit of the method.     

Simultaneous determination of rufloxacin, fenbufen and felbinac in human plasma using high-performance liquid chromatography

A simple, specific and sensitive high-performance liquid chromatographic method has been developed for the simultaneous determination of rufloxacin, fenbufen and felbinac in human plasma. Plasma, spiked with internal standard, was vortex-mixed for 1 min with a mixture of dichloromethane-diethyl ether (80:20, v/v). The evaporated extract was dissolved in 0.02 M NaOH. Drugs were resolved at room temperature on a 5 μm Zorbax SAX column (250×4.6 min I.D.) equipped with a 20×4.6 mm anion-exchange Vydac AXGU ( 10 μm particle size) precolumn. The mobile phase consisted of acetonitrile and phosphate buffer (pH 7.0), delivered at a flow-rate of 1.2 ml/min. Detection was made at 280 nm, 2-[4-(2′-Furoyl)phenyl]propionic acid was used as internal standard. The calibration curve was linear from 0.2 to 10μg/ml for rufloxacin, from 0.5 to 30 μg/ml for fenbufen and from 0.2 to 10 μg/ml for felbinac, respectively. The detection limit was 0.1 μg/ml for rufloxacin. 0.3 μg/ml for fenbufen and 0.1 μg/ml for felbinac, respectively.     

Determination of N-nitroso-l-arginine in rat brain extracts by capillary electrophoresis using photodiode-array detection

N-Nitroso-l-arginine was described as one of the products of l-arginine metabolism in biological media. A simple and rapid method to determine its concentration in rat brain was developed. Capillary electrophoresis with a photodiode-array detector was used at 254 nm, permitting the quantification of N-nitroso-l-arginine. The detection limit in biological solution was 1 μg/ml.     

Determination of N-nitroso-l-arginine in rat brain extracts by capillary electrophoresis using photodiode-array detection

N-Nitroso-l-arginine was described as one of the products of l-arginine metabolism in biological media. A simple and rapid method to determine its concentration in rat brain was developed. Capillary electrophoresis with a photodiode-array detector was used at 254 nm, permitting the quantification of N-nitroso-l-arginine. The detection limit in biological solution was 1 μg/ml.     

High-performance liquid chromatographic determination of tazobactam and piperacillin in human plasma and urine

A high-performance liquid chromatographic (HPLC) method with ultraviolet (UV) absorbance was developed for the analysis of piperacillin-tazobactam (tazocillin), in plasma and urine. The detection was performed at 218 nm for tazobactam and 222 nm for piperacillin. The procedure for assay of these two compounds in plasma and of piperacillin in urine involves the addition of an internal standard (ceftazidime for tazobactam and benzylpenicillin for piperacillin) followed by a treatment of the samples with acetonitrile and chloroform. To quantify tazobactam in urine, diluted samples were analysed using a column-switching technique without internal standard. The HPLC column, LiChrosorb RP-select B, was equilibrated with an eluent mixture composed of acetonitrile-ammonium acetate (pH 5). The proposed technique is reproducible, selective, and reliable. The method has been validated, and stability tests under various conditions have been performed. Linear detector responses were observed for the calibration curve standards in the ranges 5–60 μg/ml for tazobactam, and 1–100 μg/ml for piperacillin and spans what is currently though to be the clinically relevant range for tazocillin concentrations in body fluids. The limit of quantification was 3 μg/ml for tazobactam and 0.5 μg/ml for piperacillin in plasma and urine. Extraction recoveries from plasma proved to be more than 85%. Precision, expressed as C.V., was in the range 0.4–18%.     

Utility of the food colorant erythrosine B as an effective green probe for quantitation of the anticancer sunitinib. Application to pharmaceutical formulations and human plasma

Sunitinib is a tyrosine kinase inhibitor used for the treatment of renal cell carcinoma and gastrointestinal stromal tumors. In this study, two spectroscopic methods, spectrofluorometric and spectrophotometric, were utilized to quantify sunitinib in different matrices. In method I, the native fluorescence of erythrosine B was quenched by forming ion-pair complex with increasing quantities of sunitinib. This approach was utilized for measuring sunitinib in its dosage forms and spiked plasma. After excitation at 528 nm, the quenching of fluorescence is linearly related to the concentration across the range of 0.05–0.5 μg mL⁻¹ at 550 nm in Britton–Robinson buffer (pH 4.0), with a correlation value of 0.9999 and a high level of sensitivity with detection limit down to 10 ng mL⁻¹. Method II relies on spectrophotometric measurements of the produced complex at 550 nm across a range of 0.5–10.0 μg mL⁻¹, with good correlation value of 0.9999. This method has a detection limit down to 0.16 μg mL⁻¹. The proposed methodologies were validated according to International Conference on Harmonization (ICH) guidelines with satisfactory results. The stoichiometry of the reaction was determined through the application of Job's method, while the mechanism of quenching was investigated by employing the Stern–Volmer plot. The designated methods were used to estimate sunitinib in its capsules and in spiked human plasma. Additionally, the statistical analysis of the data revealed no substantial differences when compared to previous reported spectroscopic method. Green assessment tools provide further details about the eco-friendly nature of the methods.     

Enantioselective determination of sotalol enantiomers in biological fluids using high-performance liquid chromatography

A simple and sensitive high-performance liquid chromatograhic (HPLC) method for the determination of (+)-(S)-sotalol and (−)-(R)-sotalol in biological fluids was established. Following extraction with isopropyl alcohol from biological samples on a Sep-Pak C₁₈ cartridge, the eluent was derivatized with 2,3,4,6-tetra-O-acetyl-β-d-glucopyranosol isothiocyanate (GITC). The diastereoisomeric derivatives are resolved by HPLC with UV detection at 225 nm. Calibration was linear from 0.022 to 4.41 μg/ml in human plasma and from 0.22 to 88.2 μg/ml in human urine for both (+)-(S)- and (−)-(R)-sotalol. The lower limit of determination was 0.022 μg/ml for plasma and 0.22 μg/ml for urine. The within-day and day-to-day coefficients of variation were less than 7.5% for each enantiomer at 0.09 and 1.8 μg/ml in plasma and at 0.44 and 4.4 μg/ml in urine. The method is also applicable to other biological specimens such as rat, mouse and rabbit plasma.     

Simultaneous determination of a new anticancer agent (NB-506) and its active metabolite in human plasma and urine by high-performance liquid chromatography with ultraviolet detection

A high-performance liquid chromatographic method with ultraviolet detection has been developed to quantify NB-506 and its active metabolite in human plasma and urine. This method is based on solid-phase extraction, thereby allowing the simultaneous measurement of the drug and metabolite with the limit of quantification of 0.01 μg/ml in plasma and 0.1 μg/ml in urine. Standard curves for the compounds were linear in the concentration ranges investigated. The range for the drug in plasma was 0.01–2.5 μg/ml, and for the metabolite 0.01–1 μg/ml. In urine, the range for both compounds was 0.1–10 μg/ml. The method was validated and applied to the assay of plasma and urinary samples from phase I studies.     

Determination of caffeic acid in rabbit plasma by high-performance liquid chromatography

A simple and sensitive high-performance liquid chromatographic method involving UV detection was developed for determination of caffeic acid in rabbit plasma. A Lichrosphere CN column (250 mm × 4 mm I.D., 5 μm) was used as the stationary phase and the mobile phase consisted of 2% acetic acid solution at a flow-rate of 1.0 ml/min. The UV absorbance was monitored at 320 nm. The plasma sample was acidified by the addition of 0.01 parts of concentrated phosphoric acid (85%) to maintain caffeic acid stability. After a simple clean-up procedure, the limit of quantitation achieved was 0.1 μg/ml, and the standard curve was found to be linear over the concentration ranges of 0.1–2.0 μg/ml and 0.1–40 μg/ml. The coefficient of variation for within- and between-run precision and accuracy was less than 10%, and the recovery was 82.3%.     

A validated enantiospecific method for determination and purity assay of clopridogrel

A new and accurate HPLC method using β‐cyclodextrin chemically bonded to spherical silica particles as chiral stationary phase (CSP) was developed and validated for determination of S‐clopidogrel and its impurities R‐enantiomer and S‐acid as a hydrolytic product. The effects of acetonitrile and methanol content in the mobile phase and temperature on the resolution and retention of enantiomers were investigated. A satisfactory resolution of S‐clopidogrel active form and its impurities was achieved on ChiraDex® column (5 μm, 4 × 250 mm) at a flow rate of 1.0 ml/min and 17°C using acetonitrile, methanol and 0.01 M potassium dihydrogen phosphate solution (15:5:80 v/v/v) as mobile phase. The detection wavelength was set at 220 nm. The method was validated in terms of accuracy, precision, linearity, and robustness. The limit of detection for R‐enantiomer and S‐acid were 0.75 and 0.09 μg/ml, respectively, injection volume being 20 μl. Finally, the molecular modeling of the inclusion complexes between the analytes and β‐cyclodextrin was performed to investigate the mechanism of the enantiorecognition and to study the quantitative structure–retention relationships. Chirality, 2009. © 2008 Wiley‐Liss, Inc.     

Chiral Assay of Atenolol Present in Microdialysis and Plasma Samples of Rats Using Chiral CBH as Stationary Phase

Two different enantioselective chiral chromatographic methods were developed and validated to investigate the disposition of the β₁-receptor antagonist atenolol in blood and in brain extracellular fluid of rats (tissue dialysates). System A for the plasma samples was a one-column chromatographic system with a Chiral CBH column with an aqueous buffer as mobile phase into which cellobiose was added for selective regulation of the retention of the internal standard, (S)-metoprolol. The plasma samples were analysed after a simple extraction procedure. The limit of quantitation was 0.2 μg/ml for the atenolol enantiomers. The repeatability of the medium concentration quality control plasma sample (6.0 μg rac-atenolol/ml) was 11–18% for the enantiomers. The dynamic linear range of the plasma samples was 0.5–20 μg/ml. For system B, since atenolol is an extremely hydrophilic drug, the tissue dialysate sample required a much more sensitive system as compared to the plasma samples. A coupled column system was used for peak compression of the enantiomers in the eluate after the separation on the Chiral CBH column, hence increasing the detection sensitivity. The limit of quantification was 0.045 μg/ml for the atenolol enantiomers in artificial CSF. The repeatability of the medium concentration quality control samples (0.1 and 4.0 μg rac-atenolol/ml in artificial CSF and Hepes Ringer, respectively) was 2.8–9.3% for the two enantiomers. The dynamic linear range of the brain samples was 0.05–1.0 and 0.5–20 μg/ml in artificial CSF and Hepes Ringer, respectively. Chirality 9:329–334, 1997. © 1997 Wiley-Liss, Inc.     

Determination of sulfadoxine in human blood plasma using packed-column supercritical fluid chromatography

A sensitive, rapid, selective and reproducible method has been developed to measure plasma levels of sulfadoxine, 4-Amino-N-(5, 6-dimethoxy-4-pyrimidinyl) benzensulfonamide; in healthy, human volunteers using packed-column supercritical fluid chromatography. Omeprazole, 5-methoxy-2-[[(4-methoxy-3, 5-di-methyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole; was used as the internal standard (i.s.) at 15.0 μg/ml. The drug and the i.s. were extracted from plasma using dichloromethane. Separation of sulfadoxine and i.s. was done on a Nucleosil (250×4.6 mm) 10 μm, RP-C₁₈ column with 7.4% (v/v) methanol-modified supercritical fluid carbon dioxide (2.5 ml/min) as the mobile phase. The column temperature was 40°C and the outlet pressure was set at 8.83 MPa. The detection was done using a UV–Vis detector set at 265 nm. The limit of quantification was 0.50 μg/ml using 1 ml plasma specimen. The mean extraction recovery of the drug from plasma was found to be 94.9%. The SFC method was directly compared to a published HPLC/UV method. With respect to speed and use of organic solvents SFC was found to be superior; while in all other aspects the results were similar to the published technique. The method has been successfully used to estimate the sulfadoxine levels in healthy human volunteers from 0 to 240 h following an oral dose of 500 mg of sulfadoxine in combination with 25 mg of pyrimethamine.