A novel chemiluminescence sensor for the determination of indomethacin based on sulfur and nitrogen co‐doped carbon quantum dot–KMnO4 reaction

We report on a simple and sensitive sulfur and nitrogen co‐doped carbon quantum dot (S,N‐CQD)‐based chemiluminescence (CL) sensor for the determination of indomethacin. S,N‐CQDs were prepared by a hydrothermal method and characterized by fluorescence spectra, Fourier transform infrared spectroscopy and transmission electron microscopy. To obtain the best CL system for determination of indomethacin, the reaction of S,N‐CQDs with some common oxidants was studied. Among the tested systems, the S,N‐CQD–KMnO₄ reaction showed the highest sensitivity for the detection of indomethacin. Under optimum conditions, the calibration plot was linear over a concentration range of 0.1–1.5 mg L^?1, with a limit of detection (3σ) of 65 μg L^?1. The method was applied to the determination of indomethacin in environmental and biological samples with satisfactory results.     

Highly luminescent S,N co‐doped carbon quantum dots‐sensitized chemiluminescence on luminol–H2O2 system for the determination of ranitidine

S,N co‐doped carbon quantum dots (N,S‐CQDs) with super high quantum yield (79%) were prepared by the hydrothermal method and characterized by transmission electron microscopy, photoluminescence, UV–Vis spectroscopy and Fourier transformed infrared spectroscopy. N,S‐CQDs can enhance the chemiluminescence intensity of a luminol–H₂O₂ system. The possible mechanism of the luminol–H₂O₂–(N,S‐CQDs) was illustrated by using chemiluminescence, photoluminescence and ultraviolet analysis. Ranitidine can quench the chemiluminescence intensity of a luminol–H₂O₂–N,S‐CQDs system. So, a novel flow‐injection chemiluminescence method was designed to determine ranitidine within a linear range of 0.5–50 μg ml^?1 and a detection limit of 0.12 μg ml^?1. The method shows promising application prospects.     

Boron and nitrogen co‐doped carbon dots as a sensitive fluorescent probe for the detection of curcumin

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co‐doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as‐prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2–12.5 μM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5–105.5%.     

A highly sensitive and selective detection of picric acid using fluorescent sulfur‐doped graphene quantum dots

The development of an analytical probe to monitor highly mutagenic picric acid (PA) carries enormous significance for the environment and for health. A novel, simple and rapid fluorescence analytical assay using sulfur‐doped graphene quantum dots (SGQDs) was designed for the highly sensitive and selective detection of PA. SGQDs were synthesized via simple pyrolysis of 3‐mercaptopropionic acid and citric acid and characterized using advanced analytical techniques. Fluorescence intensity (FI) of SGQDs was markedly quenched by addition of PA, attributed to the inner filter effect and dominating static quenching mechanism between the two, in addition to a significant colour change. The calibration curve of the proposed assay exhibited a favourable linearity between quenched FI and PA concentration over the 0.1–100 μΜ range with a lowest detection limit of 0.093 μΜ and a correlation coefficient of 0.9967. The analytical assay was investigated for detection of trace amounts of PA in pond and rain water samples and showed great potential for practical applications with both acceptable recovery (98.0–100.8%) and relative standard deviation (1.24–4.67%). Analytical performance of the assay in terms of its detection limit, linearity range, and recovery exhibited reasonable superiority over previously reported methods, thereby holding enormous promise as a simple, sensitive, and selective method for detection of PA.     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

Carbon dots-modified paper-based chemiluminescence device for rapid determination of mercury (II) in cosmetics

Here, a simple and portable paper-based analytical device (PAD) based on the inherent capability of carbon quantum dots (CQDs) to serve as a great emitter for the bis(2,4,6-trichlorophenyl)oxalate (TCPO)–hydrogen peroxide (H₂O₂) chemiluminescence (CL) reaction is introduced for the detection of harmful mercury ions (Hg²⁺). The energy is transferred from the unstable reaction intermediate (1,2-dioxetanedione) to CQDs, as acceptors, and an intensive orange-red CL emission is generated at ~600 nm, which is equal to the fluorescence emission wavelength of CQDs. The analytical applicability of this system was examined for the determination of Hg²⁺. It was observed that Hg²⁺ could significantly quench the produced emission, which can be attributed to the formation of a stable and nonluminescent Hg²⁺–CQDs complex. Accordingly, a simple and rapid PAD was established for monitoring Hg²⁺, with a limit of detection of 0.04 μg ml⁻¹. No interfering effect on the signal was found from other examined cations, indicating the acceptable specificity of the method. The designed assay was appropriately utilized to detect Hg²⁺ ions in cosmetic samples with high efficiency. It was characterized by its low cost, ease of use, and was facile but accurate and high selective for the detection of Hg²⁺ ions. In addition, the portability of this probe makes it suitable for on-site screening purposes.     

DNA‐based chemiluminescent nanoprobes for highly sensitive and selective detection of mercury(II) ion

A simple and sensitive DNA‐stablized gold nanoparticle (AuNP)‐based chemiluminescent (CL) probe for detecting mercury ion (Hg²⁺) in aqueous solution has been developed. The CL strategy relies upon the catalytic activity of unmodified AuNPs on the luminol–H₂O₂ CL reaction, and the interaction of unmodified AuNPs with DNA. The unmodified AuNPs can effectively differentiate unstructured and folded DNA. The DNA desorbs from AuNPs in the presence of Hg²⁺, leading to the increase in CL signal. By rationally varying the number of thymine in single‐strand oligonucleotides, the detection range could be tuned. Employing single‐strand oligonucleotides with 14 thymine in the detecting system, a sensitive linear range for Hg²⁺ ions from 5.0 × 10^–10 to 1.0 × 10^–7 mol/L and a detection limit of 2.1 × 10^–10 mol/L are obtained. Changing the number of thymine to 10 and 6, it leads to a narrow detection range but a high sensitivity. Besides, DNA‐based CL nanoprobes exhibit a remarkable selectivity for Hg²⁺ ions over a variety of competing metal ions. Copyright © 2012 John Wiley & Sons, Ltd.     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

Ultrasensitive chemiluminescence assay for cimetidine detection based on the synergistic improving effect of Au nanoclusters and graphene quantum dots

A novel and sensitive chemiluminescence (CL) procedure based on the synergetic catalytic effects of gold nanoclusters (Au NCs) and graphene quantum dots (GQDs) was developed for the reliable measurement of cimetidine (CM). The initial experiments showed that the KMnO₄‐based oxidation of alkaline rhodamine B (RhoB) generated a very weak CL emission, which was intensively enhanced in the simultaneous presence of Au NCs and GQDs. CL intermediates can be adsorbed and gathered on the surface of Au NCs, becoming more stable. GQDs participate in the energy transferring processes and facilitate them. These improving effects were simultaneously obtained by adding both Au NCs and GQDs into the RhoB‐KMnO₄ reaction. Consequently, the increasing effect of the Au NCs/GQDs mixture was more than that of pure Au NCs or GQDs, and a new nano‐assisted powerful CL system was achieved. Furthermore, a marked quenching in the emission of the introduced CL system was observed in the presence of CM, so the system was examined to design a sensitive sensor for CM. After optimization of influencing parameters, the linear lessening in CL emission intensity of KMnO₄‐RhoB‐Au NCs/GQDs was verified for CM concentrations in the range 0.8–200 ng ml^?1. The limit of detection (3S_b/m) was 0.3 ng ml^?1. Despite being a simple CL method, good sensitivity was obtained for CM detection with reliable results for CM determination in human urine samples.     

Simultaneous and sensitive detection of dual DNA targets via quantum dot‐assembled amplification labels

We describe a signal amplification assay for the simultaneous detection of HIV‐1 and HIV‐2 via a quantum dot (QD) layer‐by‐layer assembled polystyrene microsphere (PS) composite in a homogeneous format. The crucial point of this composite is the core–shell system. PS is utilized as the core and QDs as the shell. Based on the high affinity of streptavidin and biotin, QDs are assembled layer‐by‐layer on the surface of the PS as amplification labels. Biotinylated reporter probe is combined with the PS–QDs conjugate and then hybridized with target DNA immobilized on the surface of a 96‐well plate. Using this approach, each target DNA corresponds to a large number of QDs and the fluorescence signal is greatly enhanced. Two QD colors (605 and 655 nm) are used to detect dual‐target DNAs simultaneously. Taking advantage of the enzyme‐free reaction and high sensitivity, this PS–QD‐based sensor can be used in simple ‘mix and detection’ assays. Our results show that this technology has potential application in rapid point‐of‐care testing, gene expression studies, high‐throughput screening and clinical diagnostics. Copyright © 2015 John Wiley & Sons, Ltd.     

Graphene‐amplified electrogenerated chemiluminescence of CdTe quantum dots for H2O2 sensing

Electrogenerated chemiluminescence (ECL) of thiol‐capped CdTe quantum dots (QDs) in aqueous solution was greatly enhanced by PDDA‐protected graphene (P‐GR) film that were used for the sensitive detection of H₂O₂. When the potential was cycled between 0 and ?2.3 V, two ECL peaks were observed at ?1.1 (ECL‐1) and ?1.4 V (ECL‐2) in pH 11.0, 0.1 M phosphate buffer solution (PBS), respectively. The electron‐transfer reaction between individual electrochemically‐reduced CdTe nanocrystal species and oxidant coreactants (H₂O₂ or reduced dissolved oxygen) led to the production of ECL‐1. While mass nanocrystals packed densely in the film were reduced electrochemically, assembly of reduced nanocrystal species reacted with coreactants to produce an ECL‐2 signal. ECL‐1 showed higher sensitivity for the detection of H₂O₂ concentrations than that of ECL‐2. Further, P‐GR film not only enhanced ECL intensity of CdTe QDs but also decreased its onset potential. Thus, a novel CdTe QDs ECL sensor was developed for sensing H₂O₂. Light intensity was linearly proportional to the concentration of H₂O₂ between 1.0 × 10^?5 and 2.0 x 10^‐7 mol L^?1 with a detection limit of 9.8 x 10^?8 mol L^?1. The P‐GR thin‐film modified glassy carbon electrode (GCE) displayed acceptable reproducibility and long‐term stability. Copyright © 2012 John Wiley & Sons, Ltd.     

Graphene quantum dot based charge‐reversal nanomaterial for nucleus‐targeted drug delivery and efficiency controllable photodynamic therapy

Graphene quantum dots (GQDs), the new zero‐dimensional carbon nanomaterial, have been demonstrated as a promising material for biomedical applications due to its good biocompatibility and low toxicity. However, the integration of multiple therapeutic approaches into a nanosized platform based on the GQD has not been explored yet to our best knowledge. In this report, we regulate the generation of reactive oxygen species (ROS) when using the GQD as a photosensitizer by varying the doping amount of nitrogen atoms to achieve efficiency controllable photodynamic therapy. On the other hand, charge‐reversal (3‐Aminopropyl) triethoxysilane (APTES) was used to conjugate on the surface of GQD for nucleus targeting drug delivery for the first time. The treatment outcome of produced ROS and nucleus‐targeting drug delivery was investigated by fluorescence imaging. The results demonstrated that the N‐GQD‐DOX‐APTES in dual roles as a drug carrier and photosensitizer could achieve nucleus‐targeting delivery and strong ROS production simultaneously. This approach provides a promising strategy for the development of multifunctional therapy in one nano platform for biomedical applications.      

Nitrogen‐doped carbon dots as a fluorescent probe for the highly sensitive detection of Ag+ and cell imaging

An easy hydrothermal synthesis strategy was applied to synthesize green‐yellow emitting nitrogen‐doped carbon dots (N‐CDs) using 1,2‐diaminobenzene as the carbon source, and dicyandiamide as the dopant. The nitrogen‐doped CDs resulted in improvement in the electronic characteristics and surface chemical activities. N‐CDs exhibited bright fluorescence emission and could response to Ag⁺ selectively and sensitively. Other ions produced nearly no interference. A N‐CDs based fluorescent probe was then applied to sensitively determine Ag⁺ with a detection limit of 5 × 10^?8 mol/L. The method was applied to the determination of Ag⁺ dissolved in water. Finally, negligibly cytotoxic, excellently biocompatibile, and highly fluorescent carbon dots were applied for HepG2 cell imaging and the quenched fluorescence by adding Ag⁺, which indicated its potential applications.     

d‐penicillamine capped cadmium telluride quantum dots as a novel fluorometric sensor of copper(II)

d ‐penicillamine‐capped cadmium telluride quantum dots (DPA‐capped CdTe QDs) were synthesized as the new fluorescent semiconductor nanocrystal in aqueous solution. Fourier transmission infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet‐visible and photoluminescence spectroscopy were used for characterization of the QDs. Based on the quenching effect of Cu²⁺ ions on the fluorescence intensity of DPA‐capped CdTe QDs, a new fluorometric sensor for copper(II) detection was developed that showed good linearity over the concentration range 5 × 10^–9–3 × 10^–6 m with the detection limit 0.4 × 10^–9 m . Owing to the strong affinity of the DPA to copper(II), the sensor showed appropriate selectivity for copper(II) compared with conventional QDs. The DPA‐capped CdTe QDs was successfully applied for determination of Cu²⁺ concentration in river, well and tap waters with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Development of a sensitive flow‐injection–chemiluminescence detection method for the determination of laevodopa

A simple chemiluminometric method using flow injection has been developed for the determination of laevodopa, based on its sensitizing effect on the weak chemiluminescence (CL) reaction between Na₂SO₃ and acidic KMnO₄. Under optimum experimental conditions, the CL intensity was linearly related to the concentration of laevodopa from 3.4 × 10^–8 to 2.4 × 10^–5 mol/L and the detection limit was 1.1 × 10^–8 mol/L (s:n = 3). The relative standard deviation (RSD) of the proposed method calculated from 20 replicate injection of 3 × 10^–7 mol/L laevodopa was 3.3%. The correlation coefficient was 0.997. The method was successfully applied to the determination of laevodopa in commercial pharmaceutical formulations and spiked urine samples. Copyright © 2008 John Wiley & Sons, Ltd.     

N‐butylamine functionalized graphene oxide for detection of iron(III) by photoluminescence quenching

An N‐butylamine functionalized graphene oxide nanolayer was synthesized and characterized by ultraviolet (UV)–visible spectrometry, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and transmission electron microscopy. Detection of iron(III) based on photoluminescence spectroscopy was investigated. The N‐butylamine functionalized graphene oxide was shown to specifically interact with iron (III), compared with other cationic trace elements including potassium (I), sodium (I), calcium (II), chromium (III), zinc (II), cobalt (II), copper (II), magnesium (II), manganese (II), and molybdenum (VI). The quenching effect of iron (III) on the luminescence emission of N‐butylamine functionalized graphene oxide layer was used to detect iron (III). The limit of detection (2.8 × 10^?6 M) and limit of quantitation (2.9 × 10^?5 M) were obtained under optimal conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Discriminative detection of mercury (II) and hydrazine using a dual‐function fluorescent probe

A dual‐function fluorescent probe (Probe 1 ) was developed for discriminative detection of Hg²⁺ and N₂H₄. Probe 1 could discriminatively detect Hg²⁺ and N₂H₄ through two different reaction sites, with the mechanism for Probe 1 for Hg²⁺ depending on a desulfurization reaction and for N₂H₄ depending on the Schiff‐base reaction. N₂H₄ had minimal effect on Hg²⁺ detection in dimethyl sulfoxide (DMSO)/H₂O solution, but Hg²⁺ could interfere with N₂H₄ detection in DMSO/buffer solution. Different concentrations of Hg²⁺ and N₂H₄ resulted in different blue shades of Probe 1 test strips, and the shade of blue was different with the same concentration of Hg²⁺ or N₂H₄, as observed under ultraviolet light at 365 nm wavelength.     

Nepem‐211 ion exchange conductive membrane immobilized tris(2,2´‐bipyridyl) ruthenium(II) electrogenerated chemiluminescence flow sensor for high‐performance liquid chromatography and its application

We developed a sensitive and robust electrogenerated chemiluminescence (ECL) flow sensor based on Ru(bpy)₃²⁺ immobilized with a Nepem‐211 perfluorinated ion exchange conductance membrane, which has robustness and stability under a wide range of chemical and physical conditions, good electrical conductivity, isotropy and a high exchange capacity for immobilization of Ru(bpy)₃²⁺. The flow sensor has been used as a post‐column detector in high‐performance liquid chromatography for determination of erythromycin and clarithromycin in honey and pork, and tricyclic antidepressant drugs in human urine. Under optimal conditions, the linear ranges were 0.03–26 ng/μL and 0.01–1 ng/μL for macrolides and tricyclic antidepressant drugs, respectively. The detection limits were 0.02, 0.01, 0.01, 0.06 and 0.003 ng/μL for erythromycin, clarithromycin, doxepin, amitriptyline and clomipramine, respectively. There is no post‐column reagent addition. In addition to the conservation expensive reagents, the experimental setup was simplified. The flow sensor was used for 2 years with high sensitivity and stability. Copyright © 2013 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of olanzapine using N‐chlorosuccinimide–calcein reaction sensitized by zinc (II)

A novel, rapid and sensitive chemiluminescence (CL) method combined with flow‐injection (FI) has been established for the estimation of olanzapine. This method is based on the CL signal generated between N‐chlorosuccinimide and olanzapine in an alkaline medium in the presence of calcein and Zn(II). Under optimum conditions, the CL signal was proportional to the olanzapine concentration ranging from 1.0 × 10^‐10 to 3.0 × 10^‐7 g/mL. The detection limit is 8.9 × 10^‐11 g/mL olanzapine (3σ) and the relative standard deviation for 3.0 × 10^‐9 g/mL of olanzapine is 1.9% (n = 11). The current CL method was applied to determine olanzapine in pharmaceutical formulations and biological fluids with satisfactory results. The possible CL reaction mechanism is discussed briefly. Copyright © 2013 John Wiley & Sons, Ltd.     

Chemiluminescence method for the determination of piroxicam by the enhancement of the tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–cerium(IV) system and its application

A simple, rapid chemiluminescence (CL) method was described for the determination of piroxicam, a commonly used analgesic agent drug. A strong CL signal was detected when cerium(IV) sulphate was injected into tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–piroxicam solution. The CL signal was proportional to the concentration of piroxicam in the range 2.8 × 10^–8–1.2 × 10^–5 mol/L. The detection limit was 2 × 10^–8 mol/L and the relative standard deviation (RSD) was 3.7% (c = 7.0 × 10^–7 mol/L piroxicam; n = 11). The proposed method was applied to the determination of piroxicam in pharmaceutical preparations in capsules, spiked serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.