Two new reversible naphthalimide‐based fluorescent chemosensors for Hg2+

Naphthalimide‐based fluorescent probes 1 and 2 were synthesized, and were designed to form probe–Hg complexes through Hg²⁺ ions coordinated to the amide group and imidazole group. They showed high sensitivity and were selective ‘naked‐eye’ chemosensors for Hg²⁺ in phosphate buffer. The fluorescence of compounds 1 and 2 could be quenched up to 90% by the addition of Hg²⁺. Reversible probes can detect Hg²⁺ ions over a wide pH range (7.0–10.0). Copyright © 2015 John Wiley & Sons, Ltd.     

Highly selective ratiometric fluorescent Zn2+ chemosensor based on diarylethene derivative with bi‐8‐carboxamidoquinoline unit

An asymmetrical diarylethene (1O) with a bi‐8‐carboxamidoquinoline unit was synthesized. Its photochromic and fluorescence performances on stimulation with both light and metal ions showed that the diarylethene could serve as a highly selective ratiometric fluorescent chemosensor to detect Zn²⁺ ions based on internal charge transfer and chelation‐enhanced fluorescence processes. The diarylethene could selectively discriminate Zn²⁺ from Cd²⁺ in acetonitrile. Furthermore, Job's plots based on fluorescence titration and electrospray ionization mass spectrometry analysis showed 1 : 1 binding stoichiometry between 1O and Zn²⁺. The binding constant of 1O with Zn²⁺, estimated using the Benesi–Hildebrand method, and the limit of detection were 3.37 × 10⁵ M^–1 and 4.6 × 10^–8 mol/L, respectively. Additionally, the light and metal‐responsive fluorescence behavior of 1O was used successfully to construct a molecular logic circuit with four inputs and one output. Copyright © 2016 John Wiley & Sons, Ltd.     

Functionalization of poly(amidoamine) dendrimer‐based nano‐architectures using a naphthalimide derivative and their fluorescent,dyeing and antimicrobial properties on wool fibers

Novel naphthalimide–poly(amidoamine) dendrimer fluorescent dyes were synthesized, and their structures were identified and confirmed using different characterization methods such as Fourier transform infrared, ¹H NMR, ¹³C NMR, differential scanning calorimetry, elemental analysis and UV–vis spectroscopy. The spectrophotometric studies demonstrated absorption maxima (λ_max) and extinction coefficient (ε_max) values in the ranges of 429–438 nm and 25,635–88,618 L/mol/cm, respectively. The dyeing, fastness and antimicrobial properties of dyed wool fibers were examined. Colorimetric measurements demonstrated a greenish‐yellow hue with remarkable fluorescence intensity on dyed wool. Although the fastness properties of naphthalimide dye on wool fibers were poor/moderate, color fastness was appreciably improved through modification of the dye using dendrimers. The results revealed that the newly synthesized dyes are potent antimicrobial agents on wool fibers. Overall, it was deduced that poly(amidoamine) (PAMAM) dendrimers could be exploited as a promising tool in tailoring the different properties of naphthalimide dyes, being suitable for dyeing and antimicrobial finishing agents for wool fibers. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of a coumarin based fluorescent amino acid

L-2-amino-3-(6,7-dimethoxy-4-coumaryl)-propionic acid (L-Adp), as a non-proteinogenic fluorescent amino acid has been synthesized by a highly stereoselective routine (>99.5%). This fluorescent amino acid, as fluorophore-quencher pair, may be used to study peptide assays. For enantiomeric excess determination, the racemic D-Adp (D-2-amino-3-(6,7-dimethoxy-4-coumaryl)-propionic acid) has also been synthesized.     

Synthesis of a coumarin based fluorescent amino acid

Summary l-2-amino-3-(6,7-dimethoxy-4-coumaryl)-propionic acid (l-Adp), as a non-proteinogenic fluorescent amino acid has been synthesized by a highly stereoselective routine (>99.5%). This fluorescent amino acid, as fluorophorequencher pair, may be used to study peptide assays. For enantiomeric excess determination, the racemicdl-Adp (dl-2-amino-3-(6,7-dimethoxy-4-coumaryl)-propionic acid) has also been synthesized.     

Structural and photophysical properties of novel dual fluorescent compounds, 1‐aryl‐substituted 6‐methoxy‐4‐quinolones

Dual fluorescent compounds are useful platforms for the development of ratiometric probes and sensors. We have developed a new series of dual fluorescent compounds, 1‐aryl‐substituted 6‐methoxy‐4‐quinolones, and investigated their structural and photophysical properties. The X‐ray crystallographic analysis and ab initio quantum chemical calculations revealed that the developed compounds exhibited 60–75° twisted structures. The dual fluorescence of the compounds were observed in polar solvents, and the ratiometric fluorescence responses to alterations in the acidity and temperature were obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

A new xanthene‐based two‐photon fluorescent probe for the imaging of 1,4‐dithiothreitol (DTT) in living cells

1,4‐Dithiothreitol (DTT) has wide applications in cell biology and biochemistry. Development of effective methods for monitoring DTT in biological systems is important for the safe handling and study of toxicity to humans. Herein, we describe a two‐photon fluorescence probe (Rh‐DTT) to detect DTT in living systems for the first time. Rh‐DTT showed high selectivity and sensitivity to DTT. Rh‐DTT can be successfully used for the two‐photon imaging of DTT in living cells, and also can detect DTT in living tissues and mice.     

Rapid and visual detection of berberine hydrochloride based on a water‐soluble pyrene derivative

In this study, a rapid method for the detection of berberine hydrochloride (BRH) was developed based on a water‐soluble pyrenyl probe, 8‐hydroxypyrene‐1,3,6‐trisulfonic acid (HPTS). This method features low cost, good selectivity, high sensitivity and a fast response. The sensing mechanism of this probe is attributed to the formation of a complex between HPTS and BRH induced by electrostatic interaction and π–π stacking. To the best of our knowledge, this is the first fluorescent sensor for BRH based on organic materials that has low cost and a visual response. The detection limit of this method was as low as 1.24 μM and the linear response range is 2–50 μM. This method also allowed rapid detection of BRH real samples.     

Two new rhodamine‐based fluorescent chemosensors for Fe3+ in aqueous solution

Two new rhodamine‐based fluorescent probes were synthesized and characterized by NMR, high resolution mass spectrometer (HR‐MS) and IR. The probes displayed a high selectivity for Fe³⁺ among environmentally and biologically relevant metal ions in aqueous solution (CH₃OH–H₂O = 3 : 2, v/v). The significant changes in the fluorescence color could be used for naked‐eye detection. Job's plot, IR and ¹H NMR indicated the formation of 1: 1 complexes between sensor 1 and Fe³⁺. The reversibility establishes the potential of both probes as chemosensors for Fe³⁺ detection. The probe showed highly selectivity in aqueous solution and could be used over the pH range between 5 and 9. A simple paper test‐strip system for the rapid monitoring of Fe³⁺ was developed, indicating its convenient use in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Computational studies on the water‐catalyzed stereoinversion mechanism of glutamic acid residues in peptides and proteins

In contrast with the common belief that all the amino acid residues in higher organisms are l ‐forms, d ‐amino acid residues have been recently detected in various aging tissues. Aspartic acid (Asp) residues are known to be the most prone to stereoinvert via cyclic imide intermediate. Although the glutamic acid (Glu) is similar in chemical structure to Asp, little has been reported to detect d ‐Glu residues in human proteins. In this study, we investigated the mechanism of the Glu‐residue stereoinversion catalyzed by water molecules using B3LYP/6‐31+G(d,p) density functional theory calculations. We propose that the Glu‐residue stereoinversion proceeds via a cyclic imide intermediate, i.e., glutarimide (GI). All calculations were performed by using a model compound in which a Glu residue was capped with acetyl and methylamino groups on the N‐ and C‐termini, respectively. We found that two water molecules catalyze the three steps involved in the GI formation: iminolization, cyclization, and dehydration. The activation energy required for the Glu residue to form a GI intermediate was estimated to be 32.3 kcal mol^?1, which was higher than that of the experimental Asp‐residue stereoinversion. This calculation result suggests that the Glu‐residue stereoinversion is not favored under the physiological condition.     

Novel biosensor system model based on fluorescence quenching by a fluorescent streptavidin and carbazole‐labeled biotin

In the present study, a novel molecular biosensor system model was designed by using a couple of the fluorescent unnatural mutant streptavidin and the carbazole‐labeled biotin. BODIPY‐FL‐aminophenylalanine (BFLAF), a fluorescent unnatural amino acid was position‐specifically incorporated into Trp120 position of streptavidin by four‐base codon method. On the other hand, carbazole‐labeled biotin was synthesized as a quencher for the fluorescent Trp120BFLAF mutant streptavidin. The fluorescence of fluorescent Trp120BFLAF mutant streptavidin was decreased as we expected when carbazole‐labeled biotin was added into the mutant streptavidin solution. Furthermore, the fluorescence decrease of Trp120BFLAF mutant streptavidin with carbazole‐labeled biotin (100 nM) was recovered by the competitive addition of natural biotin. This result demonstrated that by measuring the fluorescence quenching and recovery, a couple of the fluorescent Trp120BFLAF mutant streptavidin and the carbazole‐labeled biotin were successfully applicable for quantification of free biotin as a molecular biosensor system. Copyright © 2016 John Wiley & Sons, Ltd.     

Chromogenic and fluorescent ‘turn‐on’ chemodosimeter for fluoride based on a F–‐triggered cascade reaction

We developed a new chromogenic and fluorescent ‘turn‐on’ chemodosimeter 1 based on a F^–‐triggered cascade reaction. This system displayed significant changes in UV/vis absorption and fluorescence emission intensities selectively for F^– over other anions in a mixture of CH₃CN/H₂O (95 : 5, v/v) and in acetonitrile. Copyright © 2014 John Wiley & Sons, Ltd.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

A new colorimetric and far‐red fluorescent probe for hydrazine with a large red‐shifted absorption spectrum

Recently, growing attention has been paid to the detection of hydrazine (NH₂NH₂) because of its important roles in industrial chemical and high toxicity to human beings. Herein, we have constructed a new colorimetric and far‐red fluorescent probe containing a receptor of 4‐bromobutanoate to selectively detect hydrazine. The probe could detect hydrazine quantitatively in the range of 40–500 μM with the detection limit of 2.9 μM. In addition, the probe could monitor hydrazine by the ratiometric method with a large (185 nm) red‐shifted absorption spectrum, and the color changes from yellow to blue make it as a ‘naked‐eye’ indicator for hydrazine. Consequently, our proposed probe would be of great benefit for monitoring hydrazine in aqueous solution.     

A new fluorescent chemosensor for cadmium(II) based on a pyrene‐appended piperidone derivative and its β‐cyclodextrin complex

We report, in this article, a piperidin‐4‐one derivative carrying pyrenyl fluorescent reporter groups which acts as a Cd²⁺ ion sensor. The compound is synthesized and characterized using IR and NMR spectral techniques. The compound forms an inclusion complex with β‐cyclodextrin. It selectively binds to Cd²⁺ ions in water and aqueous β‐cyclodextrin media. The stoichiometry of the host–guest complex of the compound with β‐cyclodextrin is 1:2. The ligand–metal ion binding stoichiometry is 1:1 both in water and in β‐cyclodextrin. The linear concentration range of detection of the metal ion is reported. Cyclodextrin complex formation does not affect the metal ion selectivity of the compound.     

Synthesis and photophysical properties of 1,2‐diphenylindolizine derivatives: fluorescent blue‐emitting materials for organic light‐emitting device

New blue‐emitting materials based on 1,2‐diphenylindolizine were designed and synthesized through a microwave‐assisted Suzuki coupling reaction. The photophysical, electrochemical, and thermal properties of the 1,2‐diphenylindolizine derivatives were investigated using UV–visible and fluorescence spectroscopy, cyclic voltammetry, thermogravimetric analysis, and differential scanning calorimetry. The 1,2‐diphenylindolizine derivatives had band gaps of 3.1–3.4 eV and indicated proper emission of around 450 nm without significant difference between in solution and thin solid film. The indolizine derivatives show an enhanced thermal stability (?T_m > 100 °C), compared with 1,2‐diphenylindolizine. These results suggest the 1,2‐diphenylindolizine derivatives are suitable for blue‐emitting materials in organic light‐emitting devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Slow Organic‐to‐Inorganic Sub‐Lattice Thermalization in Methylammonium Lead Halide Perovskites Observed by Ultrafast Photoluminescence

Carrier dynamics in methylammonium lead halide (CH₃NH₃PbI_3–xCl_x) perovskite thin films, of differing crystal morphology, are examined as functions of temperature and excitation wavelength. At room temperature, long‐lived (>nanosecond) transient absorption signals indicate negligible carrier trapping. However, in measurements of ultrafast photoluminescence excited at 400 nm, a heretofore unexplained, large amplitude (50%–60%), 45 ps decay process is observed. This feature persists for temperatures down to the orthorhombic phase transition. Varying pump photon energy reveals that the fast, band‐edge photoluminescence (PL) decay only appears for excitation ≥2.38 eV (520 nm), with larger amplitudes for higher pump energies. Lower photon‐energy excitation yields slow dynamics consistent with negligible carrier trapping. Further, sub‐bandgap two‐photon pumping yields identical PL dynamics as direct absorption, signifying sensitivity to the total deposited energy and insensitivity to interfacial effects. Together with first principles electronic structure and ab initio molecular dynamics calculations, the results suggest the fast PL decay stems from excitation of high energy phonon modes associated with the organic sub‐lattice that temporarily enhance wavefunction overlap within the inorganic component owing to atomic displacement, thereby transiently changing the PL radiative rate during thermalization. Hence, the fast PL decay relates a characteristic organic‐to‐inorganic sub‐lattice equilibration timescale at optoelectronic‐relevant excitation energies.     

KVP2O7 as a Robust High‐Energy Cathode for Potassium‐Ion Batteries: Pinpointed by a Full Screening of the Inorganic Registry under Specific Search Conditions

Candidates for high‐energy cathodes in potassium‐ion batteries (KIBs) are selected by fully screening the inorganic compound structure database. The compounds that satisfy the specific conditions for plausible KIB cathodes are further subjected to theoretical and electrochemical verification, and KVP₂O₇ is finally pinpointed. KVP₂O₇ can reversibly desert/insert ≈60% of K⁺ (60 mA h g^?1) during either chemical or electrochemical oxidation/reduction. KVP₂O₇ shows an average discharge potential of ≈4.2 V versus K/K⁺, which corresponds to an energy density of 253 W h kg^?1 at 0.25 C. This high energy density characteristic of KVP₂O₇ is maintained both during fast charge/discharge (C/D) and prolonged redox cycles. The C/D of KVP₂O₇ is also accompanied by a phase transition between a monoclinic KVP₂O₇ (P2₁/c) and a triclinic K_1?xVP₂O₇. The structure interpretation of a new K_1?xVP₂O₇ phase indicates that K⁺‐extraction induces a conformational change of two tetrahedral PO₄ units in pyrophosphates. The phase of K_1?xVP₂O₇ (x ≈0.6) remains stable during the C/D process, although it returns to the inborn P2₁/c phase after thermal treatment. It is believed that the data‐mining protocol designed for this study will provide a new strategy for materials discovery and that the pinpointed KVP₂O₇ can be utilized as a reliable KIB cathode.