Photoluminescence properties of LiTi2 − xEux(PO4)3 phosphor

A solid‐state reaction route‐based LiTi_{2 ? x}Eu_x(PO₄)₃ was phosphor synthesized for the first time to evaluate its luminescence performance by excitation, emission and lifetime (τ) measurements. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was excited at λ_exci. = 397 nm to give an intense orange–red (597 nm) emission attributed to the ⁵D₀ → ⁷F₁ magnetic dipole (ΔJ = ±1) transition and red (616 nm) emission (⁵D₀ → ⁷F₂), which is an electric dipole (ΔJ = ±2) transition of the Eu³⁺ ion. Beside this, excitation and emission spectra of host LiTi₂(PO₄)₃ powder were also reported. The effect of Eu³⁺ concentration on luminescence characteristics was explained from emission and lifetime profiles. Concentration quenching in the LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was studied from the Dexter's model. Dipole–quadrupole interaction is found to be responsible for energy transfer among Eu³⁺ ions in the host lattice. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor displayed a reddish‐orange colour realized from a CIE chromaticity diagram. We therefore suggest that this new phosphor could be used as an optical material of technological importance in the field of display devices. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of red emitting phosphor La2–xEuxLi0.5Al0.5O4 [x = 0.2–2] with K2NiF4 structure

Europium (Eu)³⁺‐substituted La₂Li_0.5Al_0.5O₄ red emitting phosphors were prepared by a conventional high‐temperature solid‐state reaction method. Powder X‐ray diffraction, diffuse reflectance spectra and spectrofluorometry were used as vital characterizing tools for the phosphors. The Eu concentration dependence luminescence properties and Judd–Ofelt intensity parameters were investigated and calculated, respectively. All compositions showed an orange red emission (due to the magnetic and electric dipole transitions of the Eu³⁺ ion) with the appropriate Commission Internationale de l'Eclairage (CIE) colour gamut under near ultraviolet or blue ray light excitation. The calculated critical distance showed that the energy transfer occured between Eu to Eu via an exchange mechanism. The Eu_1.4La_0.6Li_0.5Al_0.5O₄ composition showed the highest red emission intensity with CIE colour saturation compared with that of the commercial Eu‐activated yttrium oxysulfide red phosphor.     

Photoluminescence properties of a new orange–red‐emitting Sm3+–La3SbO7 phosphor

The antimonate compound La₃SbO₇ has high chemical stability, lattice stiffness and thermal stability. Orange–red‐emitting antimonate‐based phosphors La₃SbO₇:xSm³⁺ (x = 0.02, 0.05, 0.08, 0.10, 0.15, 0.20 and 0.25) were synthesized. The phase structure and photoluminescence properties of these phosphors were investigated. The emission spectrum obtained on excitation at 407 nm contained exclusively the characteristic emissions of Sm³⁺ at 568, 608, 654 and 716 nm, which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 of Sm³⁺, respectively. The strongest emission was located at 608 nm due to the ⁴G_5/2→⁶H_7/2 transition of Sm³⁺, generating bright orange–red light. The critical quenching concentration of Sm³⁺ in La₃SbO₇:Sm³⁺ phosphor was determined as 10% and the energy transfer between Sm³⁺ was found to be through an exchange interaction. The International Commission on Illumination chromaticity coordinates of the La₃SbO₇:0.10Sm³⁺ phosphors are located in the orange–red region. The La₃SbO₇:Sm³⁺ phosphors may be potentially used as red phosphors for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel red‐emitting phosphor,KAl1‐xPO4Cl:Eux3+ (0.1 ≤ x ≤ 1.0)

A series of phosphors KAl_1‐xPO₄Cl:Eu_x³⁺ (0.1 ≤ x ≤ 1.0) was synthesized using a facile combustion method using urea as a fuel and their structural, morphological and photoluminescence properties were investigated. It was found that the particle size was in the range of 1–2 µm with an irregular shape. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicated that this phosphor can be efficiently excited by ultraviolet (395 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J = 0, 1, 2) transitions of Eu³⁺. The impact of the Eu³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration is 0.5. The present study suggests that the KAl_0.5PO₄Cl: Eu_0.5³⁺ phosphor is a strong candidate as a red component for phosphor‐ converted white light‐emitting diodes (LEDs). Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescence study of Eu3+‐doped SrYAl3O7 phosphor

Rare‐earth ions play an important role in eco‐friendly solid‐state lighting for the lighting industry. In the present study we were interested in Eu³⁺ ion‐doped inorganic phosphors for near ultraviolet (UV) excited light‐emitting diode (LED) applications. Eu³⁺ ion‐activated SrYAl₃O₇ phosphors were prepared using a solution combustion route at 550°C. Photoluminescence characterization of SrYAl₃O₇:Eu³⁺ phosphors showed a 612 nm emission peak in the red region of the spectrum due to the ⁵D₀→⁷F₂ transition of Eu³⁺ ions under excitation at 395 nm in the near‐UV region and at the 466 nm blue excitation wavelength. These red and blue emissions are supported for white light generation for LED lighting. Structure, bonding between each element of the sample and morphology of the sample were analysed using X‐ray diffraction (XRD) and scanning electron microscopy (SEM), which showed that the samples were crystallized in a well known structure. The phosphor was irradiated with a ⁶⁰Co‐γ (gamma) source at a dose rate of 7.2 kGy/h. Thermoluminescence (TL) studies of these Eu³⁺‐doped SrYAl₃O₇ phosphors were performed using a Nucleonix TL 1009I TL reader. Trapping parameters of this phosphor such as activation energy (E), order of kinetics (b) and frequency factor (s) were calculated using Chen's peak shape method, the initial rise method and Ilich's method.     

Enhanced orange–red emission of SrZn2(PO4)2:Sm3+ via codoping Eu2+ as a sensitizer

A series of Eu²⁺‐, Sm³⁺‐ and Eu²⁺/Sm³⁺‐doped SrZn₂(PO₄)₂ samples were synthesized using a solid‐state reaction. SrZn₂(PO₄)₂:Eu²⁺ presented a broad emission band due to 4f⁶5d–4f⁷ transition of the Eu²⁺ ion. The spectra of SrZn₂(PO₄)₂:Sm sintered in air and H₂/N₂ were identical in every aspect, except for a very small difference in intensity. A Eu²⁺–Sm³⁺ energy transfer scheme was proposed to realize the sensitization of Sm³⁺ ion emission by Eu²⁺ ions, and UV‐convertible Sm³⁺‐activated red phosphor was obtained in SrZn₂(PO₄)₂:Eu²⁺, Sm³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of a novel phosphor CaB2O4:Eu3+ under NUV excitation

The new borate phosphor CaB₂O₄:Eu³⁺ was synthesized by solid‐state method and their photoluminescence properties were investigated. The results show that the pure phase of CaB₂O₄ could be available at 900°C, CaB₂O₄:Eu³⁺ phosphor could be effectively excited by the near ultraviolet light (NUV) (392 nm), and the luminescent intensity of CaB₂O₄:Eu³⁺ phosphor reached to the highest when the doped‐Eu³⁺ content was 4 mol%. The emission spectra of CaB₂O₄:Eu³⁺ phosphor could exhibit red emission at 612 nm and orange emission at 588 nm, which are ascribed to the ⁵D₀–⁷F₂ and ⁵D₀–⁷F₁ transitions of Eu³⁺ ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Eu3+‐activated Ba2Mg(PO4)2 phosphor

In this paper, we have reported the photoluminescence (PL) properties of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor synthesized using a wet chemical method. The preliminary scanning electron microscopy (SEM) investigation of the sample revealed irregular surface morphology with particle sizes in the 10–50 μm range. The strongest PL excitation peak was observed at 396 nm. The emission spectra indicated that this phosphor can be effectively excited by the 396 nm wavelength. Upon 396 nm excitation, the emission spectrum showed characteristics peaks located at 592 nm and 615 nm. These intense orange‐red emission peaks were obtained due to f→f transitions of Eu³⁺ ions. The emission peak at 592 nm is referred to as the magnetic dipole ⁵D₀→⁷F₁ transition and the emission peak at 615 nm corresponded to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺. The Commission Internationale de l’Eclairage (CIE) coordinates of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor were found to be (0.586, 0.412) for wavelength 592 nm and (0.680, 0.319) for wavelength 615 nm situated at the edge of the CIE diagram, indicating high colour purity of phosphors. Due to the high emission intensity and a good excitation profile, Eu³⁺‐doped Ba₂Mg(PO₄)₂ phosphor may be a promising orange‐red phosphor candidate for solid‐state lighting applications.     

Structural characterization and optical properties of Ca2MgSi2O7:Eu2+,Dy3+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was prepared by the solid‐state reaction method under a weak reducing atmosphere. The obtained phosphor was characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FT‐IR) techniques. The phase structure of the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was akermanite type, which is a member of the melilite group. The surface morphology of the sintered phosphor was not uniform and phosphors aggregated tightly. EDX and FT‐IR spectra confirm the elements present in the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor. Under UV excitation, a broadband emission spectrum was found. The emission spectra observed in the green region centered at 535 nm, which is due to the 4f–5d transition. The mechanoluminescence (ML) intensity of the prepared phosphor increased linearly with increases in the mechanical load. The ML spectra were similar to the photoluminescence (PL), which indicates that ML is emitted from the same emitting center of Eu²⁺ ions as PL. Copyright © 2014 John Wiley & Sons, Ltd.     

Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.     

Investigation on luminescence properties of Eu2+‐doped Ba3Al2O5Cl2 phosphor for near‐UV‐excited white LEDs

Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor was prepared by combustion synthesis (CS). The prepared phosphor was excited at 329 nm; the phosphors shows an efficient bluish‐green wide‐band emission centred at 490 nm, which originates from the 4f⁶d¹ → 4f⁷ transition of Eu²⁺ ions. The excitation spectra of the phosphors have a band centred at 329 nm. It was also characterized by XRD, FT–IR for confirmation of phase purity, and FT–IR analysis indicated the vibrations of metal–oxygen (M–O) groups. SEM shows the morphology of the phosphor at the submicron scale. The results indicate that Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor may be applicable for solid‐state lighting purposes. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescence of Eu3+‐doped in triple phosphate Ca8MgBi(PO4)7 with whitlockite structure

Triple whitlockite‐type structure‐based red phosphors Ca₈MgBi_1?x(PO₄)₇:xEu³⁺ (x = 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80 and 1.00) were synthesized by a conventional solid‐state reaction route and characterized by their X‐ray crystal structures. The X‐ray diffraction (XRD) patterns, Fourier transform infrared spectra, morphologies, photoluminescence spectra, UV/Vis reflectance spectra, decay times and the International Commission on Illumination (CIE) chromaticity coordinates of Ca₈MgBi_1?x(PO₄)₇:xEu³⁺ were analyzed. Eu‐doped Ca₈MgBi(PO₄)₇ phosphors exhibited strong red luminescence with peaks at 616 nm due to the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions after excitation at 396 nm. The UV/Vis spectra indicated that the band gap of Ca₈MgBi_0.30(PO₄)₇:0.70Eu³⁺ is larger than that of Ca₈MgBi(PO₄)₇. The phosphor developed in this study has great potential as a red‐light‐emitting phosphor for UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Combustion synthesis of blue‐emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor

Long persistence phosphor CaAl₄O₇: Eu²⁺, Dy³⁺ were prepared by a combustion method. The phosphors were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl₄O₇: Eu²⁺, Dy³⁺ phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu²⁺ in the host lattices. The lifetime decay curve of the Dy³⁺ co‐doped CaAl₄O₇: Eu²⁺ phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long‐persistent mechanism of CaAl₄O₇:Eu²⁺, Dy³⁺ phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long‐lasting phosphors for the purposes of sign boards and defence. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescence studies on Ba2ZnSi2O7 : Eu2+ phosphors crystals

A novel blue green‐emitting phosphor Ba₂ZnSi₂O₇ : Eu²⁺ was prepared by combustion synthesis method and an efficient bluish green emission under from ultraviolet to visible light was observed. The emission spectrum shows a single intensive band centered at 503 nm, which corresponds to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light‐emitting diodes (UV‐LEDs). The effect of doped Eu²⁺ concentration on the emission intensity of Ba₂ZnSi₂O₇ : Eu²⁺ was also investigated. The result indicates that Ba₂ZnSi₂O₇ : Eu²⁺ can be potentially useful as a UV radiation‐converting phosphor for white light‐emitting diodes. Copyright © 2009 John Wiley & Sons, Ltd.     

Luminescence properties of barium – gadolinium–titanate ceramics doped with rare‐earth ions (Eu3+ and Tb3+)

Barium‐gadolinium‐titanate (BaGd₂Ti₄O₁₂) powder ceramics doped with rare‐earth ions (Eu³⁺ and Tb³⁺) were synthesized by a solid‐state reaction method. From the X‐ray diffraction spectrum, it was observed that Eu³⁺ and Tb³⁺:BaGd₂Ti₄O₁₂ powder ceramics are crystallized in the form of an orthorhombic structure. Scanning electron microscopy image shows that the particles are agglomerated and the particle size is about 200 nm. Eu³⁺‐ and Tb³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics were examined by energy dispersive X‐ray analysis, Fourier transform infrared spectroscopy, photoluminescence and thermoluminescence (TL) spectra. Emission spectra of Eu³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics showed bright red emission at 613 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 408 nm (⁷F₀ → ⁵D₃) and Tb³⁺:BaGd₂Ti₄O₁₂ ceramic powder has shown green emission at 534 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 331 nm ((⁷F₆ → ⁵D₁). TL spectra show that Eu³⁺ and Tb³⁺ ions affect TL sensitivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescent properties of novel red‐emitting M7Sn(PO4)6:Eu3+ (M = Sr,Ba) for light‐emitting diodes

Novel red‐emitting phosphors, Eu³⁺‐activated M₇Sn(PO₄)₆ (M = Sr, Ba), were synthesized at 1200°C by conventional solid‐state reaction method. The luminescent properties of M₇Sn(PO₄)₆:Eu³⁺ (M = Sr, Ba) phosphors were investigated, and the critical concentration of the activator (Eu³⁺) concentration were found to be 0.175 mol and 0.21 mol per formula unit for Sr_7‐xSn(PO₄)₆:xEu³⁺ and Ba_7‐xSn(PO₄)₆:xEu³⁺, respectively. These phosphors presented red luminescence under the excitation of 395 or 465 nm, perfectly matching with the emissions wavelength of near‐ultraviolet (UV) light‐emitting diodes (LEDs) and InGaN blue LED.     

Eu3+–Eu2+‐doped xAl2O3–ySiO2 and xAl2O3–zMgO composites phosphors

In this paper, the Eu³⁺–Eu²⁺ (4%, molar ratio)‐doped xAl₂O₃–ySiO₂ (x = 0–2.5, y = 1–5) and xAl₂O₃–zMgO (x = 0–1.5, z = 0–3) composites phosphors with different Al₂O₃ to SiO₂ (A/S) and Al₂O₃ to MgO (A/M) ratios were prepared using a high‐temperature solid‐state reaction under air atmosphere. The effects of the A/S and A/M on luminescence properties, crystal structure, electron spin resonance, and Commission Internationale de l’Eclairage chromaticity coordinates of the samples were systematically analyzed. These results indicated that the different A/S and A/M ratios in the matrix effectively affected the crystal phase, degrees of self‐reduction of Eu³⁺, and led the relative emission intensity of Eu²⁺/Eu³⁺ to change and adjust.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Spectral‐converting study of Ba9–3(m+n)/2ErmYbnY2Si6O24 (m = 0.005 – 0.2, n = 0 – 0.3) orthosilicate phosphors

Optical materials composed of Ba_9–3(m+n)/2Er_mYb_nY₂Si₆O₂₄ (m = 0.005–0.2, n = 0–0.3) were prepared using a solid‐state reaction. The X‐ray diffraction patterns of the obtained phosphors were examined to index the peak positions. The photoluminescence (PL) excitation and emission spectra of the Er³⁺‐activated phosphors and the critical emission quenching as a function of Er³⁺ content in the Ba_9–3m/2Er_mY₂Si₆O₂₄ structure were monitored. The spectral conversion properties of Er³⁺ and Er³⁺–Yb³⁺ ions doped in Ba₉Y₂Si₆O₂₄ phosphors were elucidated under diode‐laser irradiation at 980 nm. Up‐conversion emission spectra and the dependence of the emission intensity on pump power for the Ba_8.55Er_0.1Yb_0.2Y₂Si₆O₂₄ phosphor were investigated. The desired up‐conversion of the emitted light, which passed through the green, yellow, orange and red regions of the spectrum, was achieved through the use of appropriate Er³⁺ and/or Yb³⁺ concentrations in the host structure and 980 nm excitation light. The up‐conversion mechanism in the phosphors is described by an energy‐level schematic. Copyright © 2015 John Wiley & Sons, Ltd.