Efficient super‐resolution volumetric imaging by radial fluctuation Bayesian analysis light‐sheet microscopy

Various computational super‐resolution methods are available based on the analysis of fluorescence fluctuation behind acquired frames. However, dilemmas often exist in the balance of fluorophore characteristics, computation cost, and achievable resolution. Here we present an approach that uses a super‐resolution radial fluctuations (SRRF) image to guide the Bayesian analysis of fluorophore blinking and bleaching (3B) events, allowing greatly accelerated localization of overlapping fluorophores with high accuracy. This radial fluctuation Bayesian analysis (RFBA) approach is also extended to three dimensions for the first time and combined with light‐sheet fluorescence microscopy, to achieve super‐resolution volumetric imaging of thick samples densely labeled with common fluorophores. For example, a 700‐nm thin Bessel plane illumination is developed to optically section the Drosophila brain, providing a high‐contrast 3D image of rhythmic neurons. RFBA analyzes 30 serial volumes to reconstruct a super‐resolved 3D image at 4‐times higher resolutions (~70 and 170 nm), and precisely resolve the axon terminals. The computation is over 2‐orders faster than conventional 3B analysis microscopy. The capability of RFBA is also verified through dual‐color imaging of cell nucleus in live Drosophila brain. The spatial co‐localization patterns of the nuclear envelope and DNA in a neuron deep inside the brain can be precisely extracted by our approach.     

Joint tagging assisted fluctuation nanoscopy enables fast high‐density super‐resolution imaging

In fluctuation‐based optical nanoscopy, investigating high‐density labeled subcellular structures with high fidelity has been a significant challenge. In this study, based on super‐resolution radial fluctuation (SRRF) microscopy, the joint tagging (JT) strategy is employed to enable fast high‐density nanoscopic imaging and tracking. In fixed cell experiment, multiple types of quantum dots with distinguishable fluorescence spectra are jointly tagged to subcellular microtubules. In each spectral channel, the decrease in labeling density guarantees the high‐fidelity super‐resolution reconstruction using SRRF microscopy. Subsequently, the combination of all spectral channels achieves high‐density super‐resolution imaging of subcellular microtubules with a resolution of ~62 nm using JT assisted SRRF technique. In the live‐cell experiment, 3‐channel JT is utilized to track the dynamic motions of high‐density toxin‐induced lipid clusters for 1 minute, achieving the simultaneous tracking of many individual toxin‐induced lipid clusters spatially distributed significantly below the optical diffraction limit in living cells.      

Back Cover: Joint tagging assisted fluctuation nanoscopy enables fast high‐density super‐resolution imaging (J. Biophotonics 9/2018)

Based on multicolor quantum dots (QDs) labeling, the joint tagging assisted super‐resolution radial fluctuation (JT‐SRRF) nanoscopy achieves high‐fidelity super‐resolution imaging of subcellular microtubules and fast live‐cell parallel tracking of cholera toxin subunit B (CTB) induced lipid clusters spatially distributed below the optical diffraction limit. This method paves the way for fast high‐density parallel tracking, which is especially beneficial for the investigation of the intensive dynamics in live‐cell applications. Further details can be found in the article by Zhiping Zeng, Jing Ma, Peng Xi, and Canhua Xu ( e201800020 ).

     

Imaging neuronal structure dynamics using 2‐photon super‐resolution patterned excitation reconstruction microscopy

Visualizing fine neuronal structures deep inside strongly light‐scattering brain tissue remains a challenge in neuroscience. Recent nanoscopy techniques have reached the necessary resolution but often suffer from limited imaging depth, long imaging time or high light fluence requirements. Here, we present two‐photon super‐resolution patterned excitation reconstruction (2P‐SuPER) microscopy for 3‐dimensional imaging of dendritic spine dynamics at a maximum demonstrated imaging depth of 130 μm in living brain tissue with approximately 100 nm spatial resolution. We confirmed 2P‐SuPER resolution using fluorescence nanoparticle and quantum dot phantoms and imaged spiny neurons in acute brain slices. We induced hippocampal plasticity and showed that 2P‐SuPER can resolve increases in dendritic spine head sizes on CA1 pyramidal neurons following theta‐burst stimulation of Schaffer collateral axons. 2P‐SuPER further revealed nanoscopic increases in dendritic spine neck widths, a feature of synaptic plasticity that has not been thoroughly investigated due to the combined limit of resolution and penetration depth in existing imaging technologies.      

Super‐beacons: Open‐source probes with spontaneous tuneable blinking compatible with live‐cell super‐resolution microscopy

Localization‐based super‐resolution microscopy relies on the detection of individual molecules cycling between fluorescent and non‐fluorescent states. These transitions are commonly regulated by high‐intensity illumination, imposing constrains to imaging hardware and producing sample photodamage. Here, we propose single‐molecule self‐quenching as a mechanism to generate spontaneous photoswitching. To demonstrate this principle, we developed a new class of DNA‐based open‐source super‐resolution probes named super‐beacons, with photoswitching kinetics that can be tuned structurally, thermally and chemically. The potential of these probes for live‐cell compatible super‐resolution microscopy without high‐illumination or toxic imaging buffers is revealed by imaging interferon inducible transmembrane proteins (IFITMs) at sub‐100 nm resolutions.     

Novel organic dyes for multicolor localization‐based super‐resolution microscopy

Precise multicolor single molecule localization‐based microscopy (SMLM) requires bright probes with compatible photo‐chemical and spectral properties to resolve distinct molecular species at the nanoscale. The accuracy of multicolor SMLM is further challenged by color channel crosstalk and chromatic alignment errors. These constrains limit the applicability of known reversibly switchable organic dyes for optimized multicolor SMLM. Here, we tested 28 commercially available dyes for their suitability to super‐resolve a known cellular nanostructure. We identified eight novel dyes in different spectral regimes that enable high quality dSTORM imaging. Among those, the spectrally close dyes CF647 and CF680 comprise an optimal dye pair for spectral demixing‐based, registration free multicolor dSTORM with low crosstalk. Combining this dye pair with the separately excited CF568 we performed 3‐color dSTORM to image the relative nanoscale distribution of components of the endocytic machinery and the cytoskeleton.

A major limitation of multicolor single molecule localization based super‐resolution microscopy (SMLM) is the availability of suitable photo‐switchable fluorescent dyes. By screening 28 commercially available dyes, novel dyes in different spectral regimes were identified that are well suited for dual and triple color SMLM with low crosstalk. These novel dyes are employed to image the relative nanoscale distribution of sub‐cellular components.     

Dual‐color STED super‐resolution microscope using a single laser source

STED (stimulated emission depletion) microscopy is one of the most promising super‐resolution fluorescence microscopies，due to its fast imaging and ultra‐high resolution. In this paper, we present a dual‐color STED microscope with a single laser source. Polarization beam splitters are used to separate the output from a supercontinuum laser source into four laser beams, including two excitation beams (488, 635 nm) and two depletion beams (592, 775 nm). These four laser beams are then used to build a low cost dual‐color STED system to achieve a spatial resolution of 75 nm in cell samples.     

Nucleocytoplasmic transport of intrinsically disordered proteins studied by high‐speed super‐resolution microscopy

Both natively folded and intrinsically disordered proteins (IDPs) destined for the nucleus need to transport through the nuclear pore complexes (NPCs) in eukaryotic cells. NPCs allow for passive diffusion of small folded proteins while barricading large ones, unless they are facilitated by nuclear transport receptors. However, whether nucleocytoplasmic transport of IDPs would follow these rules remains unknown. By using a high‐speed super‐resolution fluorescence microscopy, we have measured transport kinetics and 3D spatial locations of transport routes through native NPCs for various IDPs. Our data revealed that the rules executed for folded proteins are not well followed by the IDPs. Instead, both large and small IDPs can passively diffuse through the NPCs. Furthermore, their diffusion efficiencies and routes are differentiated by their content ratio of charged (Ch) and hydrophobic (Hy) amino acids. A Ch/Hy‐ratio mechanism was finally suggested for nucleocytoplasmic transport of IDPs.     

Glyoxal as an alternative fixative to formaldehyde in immunostaining and super‐resolution microscopy

Paraformaldehyde (PFA) is the most commonly used fixative for immunostaining of cells, but has been associated with various problems, ranging from loss of antigenicity to changes in morphology during fixation. We show here that the small dialdehyde glyoxal can successfully replace PFA. Despite being less toxic than PFA, and, as most aldehydes, likely usable as a fixative, glyoxal has not yet been systematically tried in modern fluorescence microscopy. Here, we tested and optimized glyoxal fixation and surprisingly found it to be more efficient than PFA‐based protocols. Glyoxal acted faster than PFA, cross‐linked proteins more effectively, and improved the preservation of cellular morphology. We validated glyoxal fixation in multiple laboratories against different PFA‐based protocols and confirmed that it enabled better immunostainings for a majority of the targets. Our data therefore support that glyoxal can be a valuable alternative to PFA for immunostaining.     

X10 expansion microscopy enables 25‐nm resolution on conventional microscopes

Expansion microscopy is a recently introduced imaging technique that achieves super‐resolution through physically expanding the specimen by ~4×, after embedding into a swellable gel. The resolution attained is, correspondingly, approximately fourfold better than the diffraction limit, or ~70 nm. This is a major improvement over conventional microscopy, but still lags behind modern STED or STORM setups, whose resolution can reach 20–30 nm. We addressed this issue here by introducing an improved gel recipe that enables an expansion factor of ~10× in each dimension, which corresponds to an expansion of the sample volume by more than 1,000‐fold. Our protocol, which we termed X10 microscopy, achieves a resolution of 25–30 nm on conventional epifluorescence microscopes. X10 provides multi‐color images similar or even superior to those produced with more challenging methods, such as STED, STORM, and iterative expansion microscopy (iExM). X10 is therefore the cheapest and easiest option for high‐quality super‐resolution imaging currently available. X10 should be usable in any laboratory, irrespective of the machinery owned or of the technical knowledge.     

Towards correlative super‐resolution fluorescence and electron cryo‐microscopy

Correlative light and electron microscopy (CLEM) has become a powerful tool in life sciences. Particularly cryo‐CLEM, the combination of fluorescence cryo‐microscopy (cryo‐FM) permitting for non‐invasive specific multi‐colour labelling, with electron cryo‐microscopy (cryo‐EM) providing the undisturbed structural context at a resolution down to the Ångstrom range, has enabled a broad range of new biological applications. Imaging rare structures or events in crowded environments, such as inside a cell, requires specific fluorescence‐based information for guiding cryo‐EM data acquisition and/or to verify the identity of the structure of interest. Furthermore, cryo‐CLEM can provide information about the arrangement of specific proteins in the wider structural context of their native nano‐environment. However, a major obstacle of cryo‐CLEM currently hindering many biological applications is the large resolution gap between cryo‐FM (typically in the range of ～400 nm) and cryo‐EM (single nanometre to the Ångstrom range). Very recently, first proof of concept experiments demonstrated the feasibility of super‐resolution cryo‐FM imaging and the correlation with cryo‐EM. This opened the door towards super‐resolution cryo‐CLEM, and thus towards direct correlation of structural details from both imaging modalities.     

Reducing data acquisition for light‐sheet microscopy by extrapolation between imaged planes

Light‐sheet fluorescence microscopy (LSFM) is a powerful technique that can provide high‐resolution images of biological samples. Therefore, this technique offers significant improvement for three‐dimensional (3D) imaging of living cells. However, producing high‐resolution 3D images of a single cell or biological tissues, normally requires high acquisition rate of focal planes, which means a large amount of sample sections. Consequently, it consumes a vast amount of processing time and memory, especially when studying real‐time processes inside living cells. We describe an approach to minimize data acquisition by interpolation between planes using a phase retrieval algorithm. We demonstrate this approach on LSFM data sets and show reconstruction of intermediate sections of the sparse samples. Since this method diminishes the required amount of acquisition focal planes, it also reduces acquisition time of samples as well. Our suggested method has proven to reconstruct unacquired intermediate planes from diluted data sets up to 10× fold. The reconstructed planes were found correlated to the original preacquired samples (control group) with correlation coefficient of up to 90%. Given the findings, this procedure appears to be a powerful method for inquiring and analyzing biological samples.     

Enhanced contrast acoustic‐resolution photoacoustic microscopy using double‐stage delay‐multiply‐and‐sum beamformer for vasculature imaging

In acoustic‐resolution photoacoustic microscopy (AR‐PAM) systems, the lateral resolution in the focal zone of the ultrasound (US) transducer is determined by the numerical aperture (NA) of the transducer. To have a high lateral resolution, a large NA is used. However, the larger the NA, the smaller the depth of focus [DOF]. As a result, the lateral resolution is deteriorated at depths out of the focal region. The synthetic aperture focusing technique (SAFT) along with a beamformer can be used to improve the resolution outside the focal region. In this work, for image formation in AR‐PAM, we propose the double‐stage delay‐multiply‐and‐sum (DS_DMAS) algorithm to be combined with SAFT. The proposed method is evaluated experimentally using hair targets and in vivo vasculature imaging. It is shown that DS_DMAS provides a higher resolution and contrast compared to other methods. For the B‐mode images obtained using the hair phantom, the proposed method reduces the average noise level for all the depths by about 134%, 57% and 23%, compared to the original low‐ resolution, SAFT+DAS and SAFT+DMAS methods, respectively. All the results indicate that the proposed method can be an appropriate algorithm for image formation in AR‐PAM systems.      

A new filtering technique for removing anti‐Stokes emission background in gated CW‐STED microscopy

Stimulated emission depletion (STED) microscopy is a prominent approach of super‐resolution optical microscopy, which allows cellular imaging with so far unprecedented unlimited spatial resolution. The introduction of time‐gated detection in STED microscopy significantly reduces the (instantaneous) intensity required to obtain sub‐diffraction spatial resolution. If the time‐gating is combined with a STED beam operating in continuous wave (CW), a cheap and low labour demand implementation is obtained, the so called gated CW‐STED microscope. However, time‐gating also reduces the fluorescence signal which forms the image. Thereby, background sources such as fluorescence emission excited by the STED laser (anti‐Stokes fluorescence) can reduce the effective resolution of the system. We propose a straightforward method for subtraction of anti‐Stokes background. The method hinges on the uncorrelated nature of the anti‐Stokes emission background with respect to the wanted fluorescence signal. The specific importance of the method towards the combination of two‐photon‐excitation with gated CW‐STED microscopy is demonstrated. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Measurement of expansion factor and distortion for expansion microscopy using isolated renal glomeruli as landmarks

Expansion microscopy has enabled super resolution imaging of biological samples. The accurate measurement of expansion factor and distortion typically requires locating and imaging the same region of interest in the sample before and after expansion, which is often time-consuming to achieve. Here we introduce a convenient method for relocation by utilizing isolated porcine glomeruli as landmarks during expansion. Following heat denaturation and proteinase K digestion protocols, the glomeruli exhibit expansion factor of 3.5 to 4 (only 7%-16% less expanded than the hydrogel), and 1% to 2% of relative distortion. Due to its appropriate size of 100 to 300 μm, the location of the glomerulus in the sample are visible to eyes, while its detailed shape only requires bright field microscopy. For expansion factors ranging from 3 to 10, the region in the vicinity of the glomerulus can be easily re-identified, and sometimes allows quantification of expansion factor and distortion under bright field without fluorescent labels.     

Label‐free ultra‐sensitive visualization of structure below the diffraction resolution limit

For both fundamental study of biological processes and early diagnosis of diseases, information about nanoscale changes in tissue and cell structure is crucial. Nowadays, almost all currently known nanoscopy methods rely upon the contrast created by fluorescent stains attached to the object or molecule of interest. This causes limitations due to the impact of the label on the object and its environment, as well as its applicability in vivo, particularly in humans. In this paper, a new label‐free approach to visualize small structure with nano‐sensitivity to structural alterations is introduced. Numerically synthesized profiles of the axial spatial frequencies are used to probe the structure within areas whose size can be beyond the diffraction resolution limit. Thereafter, nanoscale structural alterations within such areas can be visualized and objects, including biological ones, can be investigated with sub‐wavelength resolution, in vivo, in their natural environment. Some preliminary results, including numerical simulations and experiments, which demonstrate the nano‐sensitivity and super‐resolution ability of our approach, are presented.      

Measuring expansion from macro‐ to nanoscale using NPC as intrinsic reporter

Expansion microscopy is a super‐resolution method that allows expanding uniformly biological samples, by increasing the relative distances among fluorescent molecules labeling specific components. One of the main concerns in this approach regards the isotropic behavior at the nanoscale. The present study aims to determine the robustness of such a technique, quantifying the expansion parameters i.e. scale factor, isotropy, uniformity. Our focus is on the nuclear pore complex (NPC), as well‐known nanoscale component endowed of a preserved and symmetrical structure localized on the nuclear envelope. Here, we show that Nup153 is a good reporter to quantitatively address the isotropy of the expansion process. The quantitative analysis carried out on NPCs, at different spatial scales, allows concluding that expansion microscopy can be used at the nanoscale to measure subcellular features with an accuracy from 10 to 5 nm. Therefore, it is an excellent method for structural studies of macromolecular complexes.     

Efficient and cost‐effective 3D cellular imaging by sub‐voxel‐resolving light‐sheet add‐on microscopy

Light‐sheet fluorescence microscopy (LSFM) allows volumetric live imaging at high‐speed and with low photo‐toxicity. Various LSFM modalities are commercially available, but their size and cost limit their access by the research community. A new method, termed sub‐voxel‐resolving (SVR) light‐sheet add‐on microscopy (SLAM), is presented to enable fast, resolution‐enhanced light‐sheet fluorescence imaging from a conventional wide‐field microscope. This method contains two components: a miniature add‐on device to regular wide‐field microscopes, which contains a horizontal laser light‐sheet illumination path to confine fluorophore excitation at the vicinity of the focal plane for optical sectioning; an off‐axis scanning strategy and a SVR algorithm that utilizes sub‐voxel spatial shifts to reconstruct the image volume that results in a twofold increase in resolution. SLAM method has been applied to observe the muscle activity change of crawling C. elegans, the heartbeat of developing zebrafish embryo, and the neural anatomy of cleared mouse brains, at high spatiotemporal resolution. It provides an efficient and cost‐effective solution to convert the vast number of in‐service microscopes for fast 3D live imaging with voxel‐super‐resolved capability.     

Portable optical‐resolution photoacoustic microscopy for volumetric imaging of multiscale organisms

Photoacoustic microscopy (PAM) provides a fundamentally new tool for a broad range of studies of biological structures and functions. However, the use of PAM has been largely limited to small vertebrates due to the large size/weight and the inconvenience of the equipment. Here, we describe a portable optical‐resolution photoacoustic microscopy (pORPAM) system for 3‐dimensional (3D) imaging of small‐to‐large rodents and humans with a high spatiotemporal resolution and a large field of view. We show extensive applications of pORPAM to multiscale animals including mice and rabbits. In addition, we image the 3D vascular networks of human lips, and demonstrate the feasibility of pORPAM to observe the recovery process of oral ulcer and cancer‐associated capillary loops in human oral cavities. This technology is promising for broad biomedical studies from fundamental biology to clinical diseases.      

Super‐resolution structure of DNA significantly differs in buccal cells of controls and Alzheimer's patients

The advent of super‐resolution microscopy allowed for new insights into cellular and physiological processes of normal and diseased cells. In this study, we report for the first time on the super‐resolved DNA structure of buccal cells from patients with Alzheimer's disease (AD) versus age‐ and gender‐matched healthy, non‐caregiver controls. In this super‐resolution study cohort of 74 participants, buccal cells were collected and their spatial DNA organization in the nucleus examined by 3D Structured Illumination Microscopy (3D‐SIM). Quantitation of the super‐resolution DNA structure revealed that the nuclear super‐resolution DNA structure of individuals with AD significantly differs from that of their controls (p < 0.05) with an overall increase in the measured DNA‐free/poor spaces. This represents a significant increase in the interchromatin compartment. We also find that the DNA structure of AD significantly differs in mild, moderate, and severe disease with respect to the DNA‐containing and DNA‐free/poor spaces. We conclude that whole genome remodeling is a feature of buccal cells in AD.