Influence of synthesis parameters on the optical and photocatalytic properties of solvo/hydrothermal CuS and ZnS nanoparticles

Copper sulfide and zinc sulfide nanostructures were synthesized using a solvo/hydrothermal method and a thio Schiff base ligand, N‐benzylidene ethanethioamide, as a source of sulfide ions. The effects of different synthesis parameters including the type of solvent, temperature, and duration of reactions on the morphology of the CuS and ZnS products were investigated using field emission scanning microscopy and transmission electron microscopy, respectively. The structural aspects of the samples were characterized using powder X‐ray diffraction, Fourier transform infrared spectroscopy, and energy dispersive X‐ray analysis. The optical properties of the samples were studied through their optical absorption and photoluminescence spectra. The photocatalytic ability of the as‐synthesized sulfides was explored by studying the colour removal of methylene blue under ultraviolet light irradiation.     

Structural and luminescent studies of erbium‐doped CaZrO3 green‐emitting nanophosphors

Erbium (Er) (0.5, 1.0 and 1.5 wt%)‐doped CaZrO₃ nanophosphors were synthesized by the sol–gel method using poly(vinyl alcohol) as the chelating agent. Their structural and photoluminescence properties were studied using X‐ray diffraction (XRD), field emission scanning electron microscopy–energy dispersive spectroscopy (FESEM‐EDS), transmission electron microscopy (TEM), photoluminescence and Fourier transform infrared spectroscopy (FTIR). The XRD patterns of the samples confirm that nanoscale crystallite sizes. Agglomeration of the samples was observed using field emission scanning electron microscopy images. Energy dispersive spectroscopy measurements confirmed the existence of Ca, Zr, O and Er in the samples. Average particle sizes for the samples were calculated from transmission electron microscopy images. FTIR spectra clearly show characteristic absorption bands related to the metal oxides, as well as some other organic molecules. The photoluminescence spectra show bands in the green region. The Commission International de l'Eclairage coordinates were calculated and found to be in green region.     

Luminescence investigation of a cerium‐doped yttrium vanadate phosphor

Cerium (Ce³⁺)‐doped (1, 3, and 7 mol%) yttrium vanadate phosphors were prepared using a co‐precipitation technique. The structural and optical properties of the synthesized samples were studied using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), high‐resolution transmission electron microscopy (HR‐TEM), optical absorption, and photoluminescence (PL) spectroscopy techniques. The tetragonal structure and the formation of the nanosized crystallites in the YVO₄:Ce phosphor were confirmed using XRD analysis. HR‐TEM morphology showed rod‐like nanoparticles of different sizes. Optical absorption spectra demonstrated strong absorption bands at 268 and 276 nm. PL spectra showed strong peaks at 546, 574, and 691 nm following excitation at 300 nm. The calculated CIE chromaticity coordinates demonstrated that YVO₄:Ce could be used as a novel phosphor for the development of light‐emitting diode lamps.     

Effect of synthesis method and chemical reagents on the structural parameters,particle size,and optical and photoluminescence properties of ZnS nanostructures

In this experimental study, ZnS nanostructures were synthesized using two hydrothermal and co‐precipitation methods with different precursors. Different reagents and precursors were changed to obtain the best product size and morphology. The structure and crystal phase of the products were studied using X‐ray diffraction (XRD) patterns. Some structural parameters were calculated using the XRD results and a product composition was obtained by energy dispersive X‐ray (EDX) analysis and Fourier transform infrared (FT‐IR) spectra to study the chemical composition. The size and morphology of ZnS nanostructures were obtained by scanning electron microscopy (SEM). The optical properties of the synthesized ZnS nanostructures were examined using ultraviolet–visible (UV–Vis) spectra to estimate the optical band gap. Band gap energies were higher than those in the ZnS bulk sample, mainly due to quantum size effects. The photoluminescence (PL) properties of the products were investigated using PL spectra. The results showed the effect of two factors, namely synthesis method and chemical reagents, on the structure parameters, crystallite size, product size and morphology, and optical and PL properties.     

Synthesis of ZnO nanoparticles using a hydrothermal method and a study its optical activity

ZnO nanoparticles (NPs) with a granular morphology were synthesized using a hydrothermal method. Structural analysis revealed that ZnO NPs had a single crystal wurtzite hexagonal structure. Solvent polarity was responsible for varying and controlling their size and morphology. The process was very trouble free and scalable. In addition, it could be used for fundamental studies on tunable morphology formation. This hydrothermal method showed different morphology with different co‐surfactants such as a floral‐like or wire‐like belt sheet structures etc. Based on their surface morphology, the same material had different applications as a catalyst in various organic reactions and also could be used as a photocatalyst and fuel cell, solar cell or in semiconductors etc. X‐ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet–visible spectroscopy and photoluminescence of the resulting product was performed to study its purity, morphology and size, plus its optical properties via measurement of band gap energy and light absorbance.     

Synthesis and spectral investigations of Cu(II) ion‐doped NaCaAlPO4F3 phosphor

Cu(II) ion‐doped NaCaAlPO₄F₃ phosphor has been synthesized using a solid state reaction method. The prepared sample is characterized by powder X‐ray diffraction, scanning electron microscope, optical absorption, electron paramagnetic resonance photoluminescence and Fourier transform infrared spectroscopy techniques. The crystallite size evaluated from x‐ray diffraction data is in nanometers. Scanning electron microscopy micrographs showed the presence of several irregular shaped particles. From optical absorption and electron paramagnetic resonance spectral data the doped Cu(II) ions are ascribed to distorted octahedral site symmetry. The synthesized phosphor exhibits emission bands in ultraviolet, blue and green regions under the excitation wavelength of 335 nm. The CIE chromaticity coordinates (x = 0.159, y = 0.204) also calculated for the prepared sample from the emission spectrum. The Fourier transform infrared spectroscopy spectrum revealed the characteristic vibrational bands of the prepared phosphor material. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural and optical properties of europium‐ and titanium‐doped Y2O3 nanoparticles

Luminescent nanoparticles of Y₂O₃ doped with europium (Eu) and/or titanium (Ti) were synthesized using modified sol–gel routes. The crystalline cubic phase was confirmed using X‐ray powder diffraction (XRD). Particle morphology and size were evaluated using scanning and transmission electron microscopy. High‐resolution transmission electron microscopy showed that the synthesis method affected the average particle size and the Fourier transform of the images showed the lattice plane distances, indicating that the samples presented high crystallinity degree in accordance with the XRD pattern. The Ti valence was investigated using X‐ray absorption near edge spectroscopy and the tetravalent form was the dominant oxidizing state in the samples, mainly in Eu and Ti co‐doped Y₂O₃. Optical behaviour was investigated through X‐ray excited optical luminescence and photoluminescence under ultraviolet–visible (UV–vis) and vacuum ultraviolet (VUV) excitation. Results indicated that Eu³⁺ is the emitting centre in samples doped with only Eu and with both Eu and Ti with the ⁵D₀→⁷F₂ transition as the most intense, indicating Eu³⁺ in a noncentrosymmetric site. Finally, in the Eu,Ti‐doped Y₂O₃ system, Ti³⁺ (or Ti^IV) excitation was observed but no Ti emission was present, indicating a very efficient energy transfer process from Ti to Eu³⁺. These results can aid the development of efficient nanomaterials, activated using UV, VUV, or X‐rays.     

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV‐assisted) approach using Na2SeO3 as Se source and investigating optical properties

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na₂SeO₃ as the Se source by a rapid and room temperature photochemical (UV‐assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV–visible (UV–vis) spectroscopy, Fourier transform‐infrared (FT‐IR), and energy dispersive X‐ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round‐shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the ²T₂ acceptor levels of Cu²⁺. The emission was increased by increasing the Cu²⁺ ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%.     

Mechanoluminescence properties of SrAl2O4:Eu2+ phosphor by combustion synthesis

In this paper, europium‐doped strontium aluminate (SrAl₂O₄:Eu²⁺) phosphors were synthesized using a combustion method with urea as a fuel at 600°C. The phase structure, particle size, surface morphology and elemental analysis were studied using X‐ray diffractometry (XRD), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FTIR) spectra. The EDX and FTIR spectra confirm the elements present in the SrAl₂O₄:Eu²⁺ phosphor. The optical properties of SrAl₂O₄:Eu²⁺ phosphors were investigated by photoluminescence (PL) and mechanoluminescence (ML). The excitation and emission spectra showed a broad band with peaks at 337 and 515 nm, respectively. The ML intensities of SrAl₂O₄:Eu²⁺ phosphor increased proportionally with the increase in the height of the mechanical load, which suggests that this phosphor could be used in stress sensors. The CIE colour chromaticity diagram and ML spectra confirm that the SrAl₂O₄:Eu²⁺ phosphor emitted green coloured light. Copyright © 2015 John Wiley & Sons, Ltd.     

Specific monitoring of aflatoxin M1 in real samples using aptamer binding to DNFS based on turn‐on method: A novel biosensor

In the present work, a novel biocompatible scaffold was fabricated for the DNA aptamer immobilization. For the first time, amino‐functionalized dendritic fibrous nanosilica (KCC‐1‐nPr‐NH₂) and gold nanoparticle supported by chitosan (AuNPs‐CS) were synthesized and electrodeposited successfully on the surface of the glassy carbon electrode by chronoamperometry technique. Unique oligonucleotide of aflatoxin M1 (5′‐ATC CGT CAC ACC TGC TCT GAC GCT GGG GTC GAC CCG GAG AAA TGC ATT CCC CTG TGG TGT TGG CTC CCG TAT) labeled by toluidine blue was immobilization on the prepared interface. Hence, a novel aptamer‐based bioassay was formed for highly sensitive quantitation of AFM1 using cyclic voltammetry and differential plus voltammetry. The structure and morphology of GQDs‐CS/KCC‐1‐nPr‐NH₂ were investigated by Fourier‐transform infrared spectroscopy, X‐ray diffraction, atomic force, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The achieved low limit of quantification of apta‐assay for detection of AFM1 was 10fM. Also, calibration curve was linear from 0.1μM to 10fM in real samples. The proposed apta‐assay has acceptable long‐term stability. Designed aptasensor has a lot of remarkable advantages including excellent selectivity, sensitivity, and stability that could be used as facile bio‐device for the determination of AFM1 in milk samples.     

Green synthesis and physiochemical characterization of nickel oxide nanoparticles: Interaction studies with Calf thymus DNA

One of the most promising applications of nanomaterials is that of nanobiosensors, using biomolecules such as nucleic acids as receptors. This study aimed to synthesize nickel oxide nanoparticles (NiO NPs) by an environmentally friendly green synthesis, using the extract of the herb Coriandrum sativum (coriander). The synthesized NPs were characterized using UV–Visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, X‐ray photon spectroscopy, field emission scanning electron microscopy coupled with energy dispersive spectroscopy, dynamic light scattering, zeta potential and transmission electron microscopy. All results confirmed the synthesis of pure, spherical, positively charged NiO NPs of around 95 nm in diameter with prominent hydroxyl groups attached to the surface. Furthermore, interaction studies of synthesized NiO NPs with calf thymus DNA (CT DNA) were performed using UV–Visible spectroscopy, UV–thermal melting, circular dichroism, and fluorescence spectroscopy. CT DNA served as a substitute for nucleic acid biosensors. All experimental studies indicated that the NiO NPs bound electrostatically with CT DNA. These studies may facilitate exploring the potential of NiO NP–nucleic acid conjugated materials to be used as nanobiosensors for various applications, especially in pharmacological, epidemiological, and environmental diagnostic applications, and in detection.     

Solid‐phase synthesis of graphene quantum dots from the food additive citric acid under microwave irradiation and their use in live‐cell imaging

The work demonstrated that solid citric acid, one of the most common food additives, can be converted to graphene quantum dots (GQDs) under microwave heating. The as‐prepared GQDs were further characterized by various analytical techniques like transmission electron microscopy, atomic force microscopy, X‐ray diffraction, X–ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, fluorescence and UV‐visible spectroscopy. Cytotoxicity of the GQDs was evaluated using HeLa cells. The result showed that the GQDs almost did not exhibit cytotoxicity at concentrations as high as 1000 µg mL^–1. In addition, it was found that the GQDs showed good solubility, excellent photostability, and excitation‐dependent multicolor photoluminescence. Subsequently, the multicolor GQDs were successfully used as a fluorescence light‐up probe for live‐cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

ZnWO4:Eu3+ phosphor with intense blue LED excitation: photoluminescence and electron density distribution analysis

A high intensity 464 nm excitable ZnWO₄:Eu³⁺ red‐emitting phosphor for warm white lighting applications was prepared using a solid‐state reaction method by varying the dopant Eu³⁺ concentration. Crystalline purity and phase identification was confirmed and revealed using powder X‐ray diffraction and Rietveld refinement analysis. The surface morphology of Zn_1‐xEu_xWO₄ (x = 0, 0.01, 0.02, 0.03, 0.04 and 0.05) was examined using scanning electron microscopy (SEM) techniques. From SEM analysis, the ZnWO₄:Eu³⁺ phosphor prepared at 1–3% molar Eu³⁺ concentrations exhibited a small pebble‐like morphology with a smooth surface. On increasing the molar concentration of Eu³⁺ to >3%, the pebble stone morphology disappeared and a large, smooth irregular polygon‐shaped granular‐like morphology was obtained. Of the higher mol% Eu³⁺, the 4% Eu³⁺‐doped ZnWO₄ showed the best photoluminescence properties with high intensity and sharp excitation at 395 and 464 nm, followed by red emission centred at 615 nm with excellent CIE coordinates (x = 0.58 and y = 0.41) in the core red region. Elemental composition and chemical state analysis were carried out for the 4% Eu³⁺‐doped ZnWO₄ phosphor using X‐ray photoelectron spectroscopy and energy dispersive X‐ray spectroscopy studies. Based on all the above analyses, the Eu³⁺‐doped ZnWO₄ phosphor was found to be a very efficient red‐emitting phosphor under near‐UV light as well as under visible light excitation and could be used for white LED and field emissive displays applications.     

Aqueous synthesis of highly stable CdTe/ZnS Core/Shell quantum dots for bioimaging

In this work, we report the synthesis, characterization and biological application of highly stable CdTe/ZnS (cadmium tellurite/zinc sulphide) Core/Shell (CS) quantum dots (QDs) capped with mercaptosuccinic acid (MSA). The CS QDs were synthesized using a simple one‐pot aqueous method. The synthesized CdTe/ZnS CS QDs were found to exhibit excellent stability even 100 days after preparation and also showed better photoluminescence quantum yield (PLQY) of about 50% compared with that of only CdTe QDs which was nearly 12%. The formation of the CdTe/ZnS CS was confirmed by high‐resolution transmission electron microscopy (HR‐TEM), and Fourier transform infra‐red (FTIR) and X‐ray diffraction (XRD) analyses. Further, on extending our study towards bioimaging of E. coli cells using the QDs samples, we found that CdTe/ZnS CS QDs showed better results compared with CdTe QDs.     

Structural and optical properties of Cu‐doped ZnS nanoparticles formed in chitosan/sodium alginate multilayer films

Chitosan/alginate multilayers were fabricated using a spin‐coating method, and ZnS:Cu nanoparticles were generated within the network of two natural polysaccharides, chitosan and sodium alginate. The synthesized nanoparticles were characterized using an X‐ray diffractometer (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and atomic force microscopy (AFM). The results showed that cubic zinc blende‐structured ZnS:Cu nanoparticles with an average crystal size of ~ 3 nm were uniformly distributed. UV–vis spectra indicate a large quantum size effect and the absorption edge for the ZnS:Cu nanoparticles slightly shifted to longer wavelengths with increasing Cu ion concentrations. The photoluminescence of the Cu‐doped ZnS nanoparticles reached a maximum at a 1% doping level. The ZnS:Cu nanoparticles form and are distributed uniformly in the composite multilayer films with a surface average height of 25 nm. Copyright © 2013 John Wiley & Sons, Ltd.     

Optical studies of CdS:Mn nanoparticles

Cadmium sulphide nanoparticles were grown using a wet chemical method, by dissolving the reactants, cadmium chloride and sodium sulphide in water, in the presence of mercaptoethanol (ME), which was used as a capping agent. Manganese chloride was used to dope the nanoparticles. It was found that the particle size varied with different concentrations of ME. At higher concentrations of ME, smaller sized nanoparticles were synthesized. This method also reveals the high stability of nanoparticles in water. Nanoparticle properties were investigated using UV–vis absorption, photoluminescence spectroscopy, X‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The particle sizes were measured by the XRD technique, SEM and optical absorption spectra and were in the range 2–6 nm. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterization of high quantum yield and oscillator strength 6‐chloro‐2‐(4‐cynophenyl)‐4‐phenyl quinoline (cl‐CN‐DPQ) organic phosphor for solid‐state lighting

A novel blue luminescent 6‐chloro‐2‐(4‐cynophenyl) substituted diphenyl quinoline (Cl‐CN DPQ) organic phosphor has been synthesized by the acid‐catalyzed Friedlander reaction and then characterized to confirm structural, optical and thermal properties. Structural properties of Cl‐CN‐DPQ were analyzed by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) spectroscopy, X‐ray diffraction technique (XRD) and scanning electron microscopy (SEM) and energy dispersive analysis of X‐ray (EDAX) spectroscopy. FTIR spectra confirmed the presence of different functional groups and bond stretching. ¹H–NMR and ¹³C–NMR confirmed the formation of an organic Cl‐CN‐DPQ compound. X‐ray diffraction study provided its crystalline nature. The surface morphology of Cl‐CN‐DPQ was analyzed by SEM, while EDAX spectroscopy revealed the elemental analysis. Differential thermal analysis (TGA/DTA) disclosed its thermal stability up to 250°C. The optical properties of Cl‐CN‐DPQ were investigated by UV–vis absorption and photoluminescence (PL) measurements. Cl‐CN‐DPQ exhibits intense blue emission at 434 nm in a solid‐state crystalline powder with CIE co‐ordinates (0.157, 0.027), when excited at 373 nm. Cl‐CN‐DPQ shows remarkable Stokes shift in the range 14800–5100 cm^?1, which is the characteristic feature of intense light emission. A narrow full width at half‐maximum (FWHM) value of PL spectra in the range 42–48 nm was observed. Oscillator strength, energy band gap, quantum yield, and fluorescence energy yield were also examined using UV–vis absorption and photoluminescence spectra. These results prove its applications towards developing organic luminescence devices and displays, organic phosphor‐based solar cells and displays, organic lasers, chemical sensors and many more.     

Microscopies,spectroscopies and spectrometries applied to marine corrosion of copper

Used in combination, surface analytical techniques can resolve spatial relationships between bacteria and localized corrosion, determine specific corrosion mechanisms and differentiate between abiotic and biotic processes. Confocal laser scanning microscopy and scanning vibrating electrode microscopy were used to demonstrate that marine bacteria and anodic sites are co‐located. Environmental scanning electron microscopy coupled with energy dispersive X‐ray spectros‐copy was used to demonstrate dealloying of nickel from copper: nickel alloys. X‐ray absorption spectroscopy, and transmission electron microscopy equipped with electron energy loss spectrometry were used to determine the speciation of copper associated with corrosion products.     

Active MnOx Electrocatalysts Prepared by Atomic Layer Deposition for Oxygen Evolution and Oxygen Reduction Reactions

The ability to deposit conformal catalytic thin films enables opportunities to achieve complex nanostructured designs for catalysis. Atomic layer deposition (ALD) is capable of creating conformal thin films over complex substrates. Here, ALD‐MnO_x on glassy carbon is investigated as a catalyst for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), two reactions that are of growing interest due to their many applications in alternative energy technologies. The films are characterized by X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, ellipsometry, and cyclic voltammetry. The as‐deposited films consist of Mn(II)O, which is shown to be a poor catalyst for the ORR, but highly active for the OER. By controllably annealing the samples, Mn₂O₃ catalysts with good activity for both the ORR and OER are synthesized. Hypotheses are presented to explain the large difference in the activity between the MnO and Mn₂O₃ catalysts for the ORR, but similar activity for the OER, including the effects of surface oxidation under experimental conditions. These catalysts synthesized though ALD compare favorably to the best MnO_x catalysts in the literature, demonstrating a viable way to produce highly active, conformal thin films from earth‐abundant materials for the ORR and the OER.     

Water‐soluble mercaptoundecanoic acid (MUA)‐coated CdTe quantum dots: one‐step microwave synthesis,characterization and cancer cell imaging

ABSTRACT: In this study, a one‐step approach for aqueous synthesis of highly luminescent semiconductors, CdTe quantum dots (QDs), using long‐chain thiols‐mercaptoundecanoic acid (MUA) as surface ligand, was developed in a microwave irradiation system. The synthetic conditions were systematically investigated. The as‐prepared MUA‐coated QDs were characterized by various spectroscopy techniques, transmission electron microscopy (TEM) and X‐ray powder diffraction (XRD). The experimental results document that MUA‐coated CdTe QDs have small diameter, good stability, high luminescence and long lifetime. Particularly, it was confirmed, using fluorescence correlation spectroscopy (FCS) that, compared with other ligand, MUA formed a thicker ligand layer on the QD surfaces, which will help their stability and conjugation with biomolecules. Furthermore, MUA‐coated QDs were successfully used for HeLa cell imaging. Copyright © 2011 John Wiley & Sons, Ltd.