A chemiluminescence sensor array based on nanomaterials for discrimination of teas

In recent years, electronic tongue and nose devices have been developed that consist of an array of cross‐responsive sensors. In this study, we report a chemiluminescence (CL) sensor array based on oxidation at twelve different catalytic nanomaterial locations for the discrimination of eight teas. CL response patterns or “fingerprints” were obtained for a given compound on the sensor array and then discriminated through linear discriminant analysis. The experiments demonstrate that the sensor array had excellent differentiability and reversibility. Copyright © 2012 John Wiley & Sons, Ltd.     

A colorimetric sensor for the selective detection of fluoride ions

A colorimetric receptor L was prepared. Receptor L can selectively sense F^? based on distinct color changes among a series of ions. It can selectively sense F^? through an intramolecular hydrogen bond interaction. A Job plot indicated a 1:1 complexation stoichiometry between receptor L and F^?. The association constant for L –F^? in CH₃CN was determined as 9.70 × 10⁴ M^?1 using a Stern–Volmer plot.     

Sensitive chemical sensor array based on nanozymes for discrimination of metal ions and teas

Tea, originating from China, is an important part of Chinese traditional culture. There are different qualities of and producing areas for tea on the market, therefore it is necessary to discriminate between teas in a fast and accurate way. In this study, a chemical sensor array based on nanozymes was developed to discriminate between different metal ions and teas. The indicators for the sensor array are three kinds of nanozymes mimicking laccase (Cu‐ATP, Cu‐ADP, Cu‐AMP). The as‐developed sensor array successfully discriminated 12 metal ions and the detection limit was as low as 0.01 μM. The as‐developed sensor array was also able to discriminate tea samples. Different kinds of tea samples appeared in different areas in the canonical score plot with different response patterns. Furthermore, in a blind experiment, we successfully discriminated 12 samples with a 100% accuracy. This sensor array integrates chemistry and food science together, realizing the simultaneous detection of several kinds of teas using a sensitive method. The as‐developed sensor array would have an application in the tea market and provide a fast and easy method to discriminate between teas.     

A colorimetric chiral sensor based on chiral crown ether for the recognition of the two enantiomers of primary amino alcohols and amines

A new colorimetric chiral sensor material consisting of three different functional sites such as chromophore (2,4-dinitrophenylazophenol dye), binding site (crown ether), and chiral barrier (3,3'-diphenyl-1,1'-binaphthyl group) was prepared and applied to the recognition of the two enantiomers of primary amino alcohols and amines. Among five primary amino alcohols and two primary amines tested, the two enantiomers of phenylalaninol show the highest difference in the absorption maximum wavelength (Δλ(max)=43.5 nm) and in the association constants (K(S)/K(R)=2.51) upon complexation with the colorimetric chiral sensor material and, consequently, the two enantiomers of phenylalaninol were clearly distinguished from each other by the color difference.     

A novel colorimetric fluorescence sensor for Fe3+ based on quinoline Schiff base

A novel fluorescent sensor bearing a quinoline and an anisidine moiety has been developed for highly selective detection of Fe³⁺, which shows photo‐induced electron transfer (PET) behavior induced by Fe³⁺. Binding of Fe³⁺ to the sensor induced the electron of C = N group transfer from quinoline to iron, the result exhibits fluorescent enhancement. With the features of easy synthesis, simple structural skeleton and excellent sensing ability, the newly synthesized chemosensor also applied as a highly selective fluorescent probe in complex samples containing various competitive metal ions. The probe could fulfill various needs in biological and environmental fields.     

Discrimination of vinegars using a catalytic nanomaterials‐based chemiluminescence sensor array

Quality control of foods is important for both industrial and personal concerns. In the past decade, a variety of sensor techniques have been developed and various applications realized for the analysis of foods in both the liquid and gas phases. In this paper, we report a chemiluminescence (CL) sensor array based on nine catalytic nanomaterials for the discrimination of eight vinegars. CL response patterns can be obtained as ‘fingerprints’ for a given compound on the sensor array and then discriminated using linear discriminant analysis (LDA). The experiments demonstrate that the sensor array has excellent differentiability and reversibility. Copyright © 2013 John Wiley & Sons, Ltd.     

A new kind of carbohydrate array,its use for profiling antiglycan antibodies,and the discovery of a novel human cellulose-binding antibody

In this study, we use a novel glycan array to analyze the glycan-binding antibody repertoire in a pool of affinity-purified IgG collected from a healthy human population. The glycan array used is based on mono- and oligosaccharides covalently linked to the surface via a long linker at their reducing ends. They are thus presented to the medium with a well-defined orientation and are accessible for specific binding by glycan-binding proteins, such as antibodies and lectins. A novel anticellulose antibody was detected that binds specifically to beta4-linked saccharides with a preference for glucopyranose over galactopyranose residues. We also found previously known antiglycan antibodies against mono- and oligosaccharides that are constituents of commonly occurring bacterial polysaccharides. We propose that this array can facilitate high-throughput screening of glycan-binding proteins and the search for biomarkers for personalized medicine.     

A colorimetric and ratiometric fluorescent probe for sulfite based on an intramolecular cleavage mechanism

A colorimetric and ratiometric fluorescent sulfite probe, the levulinate of 4‐hydroxynaphthalimide, was successfully synthesized from 4‐hydroxy‐naphthalimide and levulinic acid. Through sulfite‐mediated intramolecular cleavage, the probe was converted into 4‐hydroxynaphthalimide, which when excited at 450 nm, displayed a large Stokes shift due to the intramolecular charge transfer process. The probe exhibited high selectivity and sensitivity towards sulfite over other typical anionic species (F^–, Cl^–, Br^–, I^–, HPO₄^2–, SO₄^2–, NO₃^–, AcO^–, ClO₄^–, HCO₃^–) in HEPES‐buffered solution (25 mm , pH 7.4, 50% acetonitrile, v/v). Copyright © 2013 John Wiley & Sons, Ltd.     

A molecularly imprinted polymer based chemiluminescence array sensor for one‐step determination of phenothiazines and benzodiazepines in pig urine

The residues of phenothiazines and benzodiazepines in foods of animal origin are dangerous to consumers. For inspection of their abuses, this study for the first time reported on the use of a chemiluminescence array sensor for the simultaneous determination of four phenothiazines and five benzodiazepines in pig urine. Two molecularly imprinted polymers were coated in different wells of a conventional 96‐well microtiter plate as the recognition reagents. After sample loading, the absorbed analytes were initiated directly by using an imidazole enhanced bis(2,4,6‐trichlorophenyl)oxalate–hydrogen peroxide system to emit light. The assay process consisted of only one sample‐loading step prior to data acquisition, so one test was finished within 10 min. The limits of detection for the nine drugs in the pig urine were in a range of 0.1 to 0.6 pg/mL, and the recoveries from the fortified blank urine samples were in a range of 80.3 to 95%. Furthermore, the sensor could be reused six times. Therefore, this sensor could be used as a simple, rapid, sensitive and reusable tool for routine screening for residues of phenothiazines and benzodiazepines in pig urine.     

Colorimetric recognizing of biologically important anions based on anion-induced tautomerism of the sensor

The anion sensing ability of compound 1 based on a novel 2,4-dinitrophenylhydrazone derivative was studied through "naked-eye" experiment, UV-Vis spectral titration, and (1)H NMR titration. Sensor 1 was synthesized through a simple method with high yield. The solution of host 1 turned deep purple from light purple in the presence of the strong basic anions and turned yellow upon addition of the weak basic anions, respectively. The results could be explained on the basis of transfer of the tautomeric equilibrium of sensor 1 induced by anions with different basicity.     

A selective colorimetric chemosensor for Fe3+

Two simple colorimetric receptors PS and PP (thiophene and pyridine appended derivative) were prepared and their cation sensing properties were investigated. Receptors PS and PP displayed a selective colorimetric change (from colorless to orange) upon binding to Fe³⁺ in MeOH solution. The association constants for receptors PS–F e³⁺ and PP–F e³⁺ in MeOH were determined to be 1.15 × 10⁶ and 4.31 × 10⁶ M^?1, respectively, using Hill plots. The detection limits of PS and PP were 490.7 ppm and 393.7 ppm, respectively.     

Real-time odor discrimination using a bioelectronic sensor array based on the insect electroantennogram

Current trends in artificial nose research are strongly influenced by knowledge of biological olfactory systems. Insects have evolved over millions of years to detect and maneuver toward a food source or mate, or away from predators. The insect olfactory system is able to identify volatiles on a time scale that matches their ability to maneuver. Here, biological olfactory sense organs, insect antennae, have been exploited in a hybrid-device biosensor, demonstrating the ability to identify individual strands of odor in a plume passing over the sensor on a sub-second time scale. A portable system was designed to utilize the electrophysiological responses recorded from a sensor array composed of male or female antennae from four or eight different species of insects (a multi-channel electroantennogram, EAG). A computational analysis strategy that allows discrimination between odors in real time is described in detail. Following a training period, both semi-parametric and k-nearest neighbor (k-NN) classifiers with the ability to discard ambiguous responses are applied toward the classification of up to eight odors. EAG responses to individual strands in an odor plume are classified or discarded as ambiguous with a delay (sensor response to classification report) on the order of 1 s. The dependence of classification error rate on several parameters is described. Finally, the performance of the approach is compared to that of a minimal conditional risk classifier.     

An electrochemical sensor based on cellulose nanocrystal for the enantioselective discrimination of chiral amino acids

A novel electrochemical sensor based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanocrystals (TOCNCs) and l-cystines (l-Cys) modified Au electrode (TOCNC/l-Cys/Au) has been fabricated for detection and discrimination of the enantiomers of phenylalanine (Phe), leucine (Leu), and valine (Val). The three amino acids are in connection with metabolism diseases. The TOCNC/l-Cys/Au electrode exhibited obvious peak current difference for the amino acid enantiomers by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The TOCNCs on the electrode surface expressed different interactions with d- and l-amino acids, so the electrochemical recognitions of the three amino acid enantiomers were achieved. TOCNCs were characterized by Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM). The modified electrodes were characterized by SEM and electrochemical techniques. According to DPV, peak currents of the two enantiomers decreased linearly with their concentrations. Furthermore, satisfactory results were obtained when this electrode was applied to measure the d- and l-Phe mixture. The experimental results show that TOCNCs are suitable material for chiral sensor. The contrast of serum sample of healthy people and patients with type 2 diabetes also was proposed, and significant difference was exhibited on the modified electrode. This work is significant for the screening, diagnosis, and treatment of multiple metabolic diseases.     

Synthesis and crystal structure of a highly selective colorimetric and fluorometric sensor for hydrogen sulfide

A novel Cu(II) complex chemosensor for hydrogen sulfide with azo as the colorimetric group has been synthesized. The complex and ligand crystals were obtained and the molecular structures were characterized by X‐ray diffraction and Electrospray ionization High resolution mass spectrometer (ESI‐HRMS). The photophysical and recognition properties were examined. The complex can recognize S^2?, with an obvious color change from yellow to red based on a copper ion complex displacement mechanism. By contrast, no obvious changes were observed in the presence of other anions (AcO^?, H₂PO₄^?, F^?, Cl^?, Br^? and I^?). We present a simple, easily prepared, yet efficient, inorganic reaction‐based sensor for the detection of S^2?. The complex should have many chemical and analytical applications in the sensing of hydrogen sulfide.     

Immobilization of biomolecular anthocyanin natural sensor into plasma-cured polyethylene terephthalate fibers from recycled plastic waste for determination of ammonia

Polyester textiles have been applied in numerous industrial applications. Polyester fibers are characterized with being excellent insulators to electricity, having excellent flexural and impact strength, ease of manufacture, low-cost, as well as having resistance to moisture and chemicals. However, polyester fibers cannot be stained due to the absence of active dyeing sites on the surface of the fibrous structure. Thus, polyester cannot be dyed after it has been extruded. Herein, we report the development of novel-colored polyester fabrics using plasma-assisted dyeing and anthocyanin natural probe for determination of ammonia that may cause severe harmful effects to human organs and even death. Anthocyanin was extracted from red cabbage and characterized. The water-soluble anthocyanin was fastened to polyester fibers by mordant (potash alum) to generate anthocyanin–mordant coordinative complex nanoparticles. Polyester can be treated with thin layer of anthocyanin probe after activation with plasma. The results showed excellent colorfastness, ultraviolet blocking, and antibacterial performance of the anthocyanin-dyed polyester (APET) fibers. The APET fibers showed great potential for developing a portable colorimetric device for an on-site detection of ammonia. APET displayed a detection limit of aqueous ammonia in the range of 25–200 ppb, displaying a change in color from purple (542 nm) to white (387 nm).     

Aerobic batch cultivation in micro bioreactor with integrated electrochemical sensor array

Aerobic batch cultivations of Candida utilis were carried out in two micro bioreactors with a working volume of 100 μL operated in parallel. The dimensions of the micro bioreactors were similar as the wells in a 96‐well microtiter plate, to preserve compatibility with the current high‐throughput cultivation systems. Each micro bioreactor was equipped with an electrochemical sensor array for the online measurement of temperature, pH, dissolved oxygen, and viable biomass concentration. Furthermore, the CO₂ production rate was obtained from the online measurement of cumulative CO₂ production during the cultivation. The online data obtained by the sensor array and the CO₂ production measurements appeared to be very reproducible for all batch cultivations performed and were highly comparable to measurement results obtained during a similar aerobic batch cultivation carried out in a conventional 4L bench‐scale bioreactor. Although the sensor chip certainly needs further improvement on some points, this work clearly shows the applicability of electrochemical sensor arrays for the monitoring of parallel micro‐scale fermentations, e.g. using the 96‐well microtiterplate format. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A novel colorimetric fluoride sensor based on a semi‐rigid chromophore controlled by hydrogen bonding

A novel semi‐rigid latent chromophore E1, containing an amide subunit activated by an adjacent semi‐rigid intramolecular hydrogen‐bonding (IHB) unit, was designed for the detection of fluoride ion by the ‘naked‐eye’ in CH₃CN. Comparative studies on structural analogs (E2, E3, and E4) provided significant insight into the structural and functional role of the amide N–H and IHB segment in the selective recognition of fluoride ions. The deprotonation of the amide N–H followed by the enhancement of intramolecular charge transfer (ICT) induced the colorimetric detection of E1 for fluoride ion. Copyright © 2015 John Wiley & Sons, Ltd.     

A colorimetric and fluorescent probe for fluoride ions based on 6‐acetyl‐2‐naphthol

A colorimetric and turn‐on fluorescent probe for fluoride ions, tert‐butyldimethylsilane 6‐acetyl‐2‐naphtholate, was readily synthesized from 6‐acetyl‐2‐naphthol and tert‐butyldimethylchlorosilane (TBSCl). The probe exhibits high sensitivity and good selectivity for fluoride ions in acetonitrile. The inherent mechanism involves the cleavage of the Si–O bond in the probe, which induced yellow color formation and prominent fluorescence enhancement. Copyright © 2013 John Wiley & Sons, Ltd.     

Distribution of saccharides and salts on amphoteric ion-exchange resin

An amphoteric ion-exchange resin hardly shrank in 550 and 300 g/L glucose and sodium chloride solutions, respectively; however, the bed packed with a cation-exchange resin shrank considerably. From the distribution coefficients of some saccharides, the swelling pressure of the amphoteric ion-exchange resin was estimated to be 2.0 MPa at 25 °C. The distribution coefficients of glucose, galactose, fructose, and mannose were independent of their concentration and were about 0.621. On the other hand, the apparent distribution coefficients of NaF, NaCl, NaBr, NaI, LiCl, KCl, and CsCl largely depended on concentration. A model for the distribution of salts on the amphoteric resin was proposed, assuming an interaction between the anion of the salt and the positively charged fixed ions with binding constant B. The B values of the chloride salts were nearly the same (1.69–2.94 L/mol), while the values of the sodium salts were largely different depending on the anion.     

A nano-Ni based ultrasensitive nonenzymatic electrochemical sensor for glucose: Enhancing sensitivity through a nanowire array strategy

Highly ordered Ni nanowire arrays (NiNWAs) were synthesized for the first time using a template-directed electropolymerization strategy with a nanopore polycarbonate (PC) membrane template, and their morphological characterization were examined by scanning electron microscopy (SEM) and transmission electron microscope (TEM). A NiNWAs based electrode shows very high electrochemical activity for electrocatalytic oxidation of glucose in alkaline medium, which has been utilized as the basis of the fabrication of a nonenzymatic biosensor for electrochemical detection of glucose. The biosensor can be applied to the quantification of glucose with a linear range covering from 5.0 × 10⁻⁷ to 7.0 × 10⁻³ M, a high sensitivity of 1043 μA mM⁻¹ cm⁻², and a low detection limit of 1 × 10⁻⁷ M. The experiment results also showed that the sensor exhibits good reproducibility and long-term stability, as well as high selectivity with no interference from other oxidable species.