The association between use of electronic media and prevalence of headache in adolescents: results from a population-based cross-sectional study

Background  

Use of electronic media, i.e. mobile phones, computers, television, game consoles or listening to music, is very common, especially amongst adolescents. There is currently a debate about whether frequent use of these media might have adverse effects on health, especially on headaches, which are among the most-reported health complaints in adolescents. The aim of the present study was to assess associations between frequent use of electronic media and the prevalence of different types of headache in adolescents.     

Books from an environmental perspective—Part 2: e-books as an alternative to paper books

Purpose  

Information and communication technology (ICT) has been proposed as a means to facilitate environmental sustainability. Dematerialisation is one potential way of doing this. For books, this could be realized through using e-book readers, which share many of the qualities of printed media and have notably low-energy requirements during use. The main aim of this study was to analyse the environmental impacts of an e-book read on an e-book reader, and to identify key issues determining the magnitude of the impact. A second aim was to compare the e-book product system with a paper book product system using a life cycle perspective.     

Classification of chemicals into emission-based impact categories: a first approach for equiprobable and site-specific conceptual frames

Purpose  

The classification step is systematically neglected in the calculation of life cycle impact assessment indicators: for several direct contribution of one pollutant to several impact categories, the distribution between these impact categories is not accounted. The proposed approaches of non-redundant classification are based on the probability that an emitted substance and its chemically degraded forms are involved into several environmental impacts.     

Life cycle assessment of mineral oil-based and vegetable oil-based hydraulic fluids including comparison of biocatalytic and conventional production methods

Background, aim and scope  

Lubricants are used in numerous applications in our society, for instance, as hydraulic fluids. When used in forestry, 60–80% of these hydraulic fluids are released into the environment. This is one of the reasons for the growing interest for developing and utilising hydraulic fluids with good environmental performance. Another driving force in the development of hydraulic fluids is to replace fossil products with renewable ones. The aim of this paper is to investigate the environmental impact of two types of hydraulic fluids, one based on mineral oil and one on vegetable oil. The difference in environmental impact of using chemical or biocatalytic production methods is also assessed.     

Life cycle assessment at nanoscale: review and recommendations

Purpose  

The need for a systematic evaluation of the human and environmental impacts of engineered nanomaterials (ENMs) has been widely recognized, and a growing body of literature is available endorsing life cycle assessment (LCA) as a valid tool for the same. The purpose of this study is to evaluate how the nano-specific environmental assessments are being done within the existing framework of life cycle inventory and impact assessment and whether these frameworks are valid and/or whether they can be modified for nano-evaluations.     

A life cycle assessment of packaging options for contrast media delivery: comparing polymer bottle vs. glass bottle

Purpose

This paper compares environmental impacts of two packaging options for contrast media offered by GE Healthcare: +PLUSPAK? polymer bottle and traditional glass bottle. The study includes all relevant life cycle stages from manufacturing to use and final disposal of the bottles and includes evaluation of a variety of end-of-life disposal scenarios. The study was performed in accordance with the international standards ISO 14040/14044, and a third-party critical review was conducted.

Methods

The functional unit is defined as the packaging of contrast media required to deliver one dose of 96 mL to a patient for an X-ray procedure. Primary data are from GE Healthcare and its suppliers; secondary data are from the ecoinvent database and the literature. A variety of end-of-life disposal scenarios are explored using both cutoff and market-based allocation. Impact assessment includes human health (midpoint) and ecosystems and resources (end point) categories from ReCiPe (H) and cumulative energy demand. Sensitivity analyses include (1) bottle size, (2) secondary packaging, (3) manufacturing electricity, (4) glass recycled content, (5) scrap rate, (6) distribution transport, (7) contrast media, and (8) choice of impact assessment method. Uncertainty analysis is performed to determine how data quality affects the study conclusions.

Results and discussion

This study indicates that the polymer bottle outperforms the glass bottle in every environmental impact category considered. Bottle components are the most significant contributors, and the vial body has the highest impacts among bottle components for both polymer and glass bottles. The polymer bottle exhibits lower impact in all impact categories considered regardless of the following: end-of-life treatment (using either cutoff or market-based allocation), bottle size, manufacturing electricity grid mix, glass recycled content, scrap rate, contrast media, distribution transport (air vs. ocean), and choice of impact assessment method. Secondary packaging can be a major contributor to impact. The polymer bottle has considerably lower impact compared to the glass bottle for all multi-pack configurations, but the comparison is less clear for single-pack configurations due to significantly higher packaging material used per functional dose, resulting in proportionally higher impacts in all impact categories.

Conclusions

The lower impacts of the polymer bottle for this packaging application can be attributed to lower material and manufacturing impacts, lower distribution impacts, and lower end-of-life disposal impacts. The results of this study suggest that using polymer rather than glass bottles provides a means by which to lower environmental impact of contrast media packaging.     

Environmental contamination by vancomycin resistant enterococci (VRE) in Swedish broiler production

Background  

Vancomycin resistant enterococci are a frequent cause of nosocomial infections and their presence among farm animals is unwanted. Using media supplemented with vancomycin an increase in the proportion of samples from Swedish broilers positive for vancomycin resistant enterococci has been detected. The situation at farm level is largely unknown. The aims of this study were to obtain baseline knowledge about environmental contamination with vancomycin resistant enterococci in Swedish broiler production and the association between environmental contamination and colonisation of birds.     

Combined application of life cycle assessment and data envelopment analysis as a methodological approach for the assessment of fisheries

Background, aim, and scope  

The synergistic use of life cycle assessment (LCA) and data envelopment analysis (DEA) is proposed as a new methodological approach to link environmental and socioeconomic assessments of fisheries. Therefore, the goal is to combine LCA and DEA in order to increase the assessment ability of both tools when applied to these fisheries. Specifically, the joint inclusion of economic aspects and the consideration of currently underrepresented environmental impact categories are tackled.     

Evaluating the environmental impact of debit card payments

Purpose

Consumers in the Netherlands made more than 3.2 billion debit card transactions at points-of-sale in 2015, corresponding to over half of all point-of-sale payments in that year. This study provides insights into the environmental impact of debit card transactions based on a life cycle assessment (LCA). In addition, it identifies several areas within the debit card payment chain where the environmental impact can be reduced.

Methods

The debit card payment system can be divided into three subsystems: debit cards, payment terminals, and data centers used for transaction processing. Input data for all elements within each subsystem (manufacturing, transport, energy use, and disposal) were retrieved from interviews and literature study. Seven key companies and authorities within the debit card system such as the Dutch Payments Association, two banks, two data centers, one payment terminal producer and a recycling company contributed data. The analysis is conducted using SimaPro, the Ecoinvent 3.0 database and the ReCiPe endpoint (H) impact assessment method.

Results and discussion

One Dutch debit card transaction in 2015 is estimated to have an absolute environmental impact of 470 μPt. Within the process chain of a debit card transaction, the relative environmental impact of payment terminals is dominant, contributing 75% of the total impact. Terminal materials (37%) and terminal energy use (27%) are the largest contributors to this share, while the remaining impact comprises data center (11%) and debit card (15%) subsystems. For data centers, this impact mainly stems from their energy use. Finally, scenario analyses show that a significant decrease (44%) in the environmental impact of the entire debit card payment system could be achieved by stimulating the use of renewable energy in payment terminals and data centers, reducing the standby time of payment terminals and increasing the lifetimes of debit cards.

Conclusions

For the first time, the environmental consequences of electronic card payment systems are evaluated. The total environmental impact of debit card transactions in the Netherlands is relatively modest compared to the impact of cash payments, which are the closest substitute of debit card payments at the point-of-sale. Scenario analysis indicates that the environmental impact can be reduced by 44%.

     

A review of methodological issues affecting LCA of novel food products

Background, aim, and scope  

Life cycle assessment (LCA) was initially developed to answer questions about the environmental impact of available products and services, implying that the product system under study was possible to investigate in detail; however, if new products or processes are to be evaluated, several complications occur. So, this paper aims to review the methodological issues that need careful attention when LCA is used for evaluating novel products, processes, or production from an environmental standpoint, as well as to draw some recommendations related to the best approach when dealing with them.     

The effect of growth media and physical treatments on the adhesion properties of canine probiotics

Aims

The manufacturing processes have been reported to influence the properties of probiotics with potential impact on health properties. The aim was to investigate the effect of different growth media and inactivation methods on the properties of canine‐originated probiotic bacteria alone and in combination mixture.

Methods and Results

Three established dog probiotics, Lactobacillus fermentum VET9A, Lactobacillus plantarum VET14A and Lactobacillus rhamnosus VET16A, and their combination mixture were evaluated for their adhesion to dog mucus. The effect of different growth media, one reflecting laboratory and the other manufacturing conditions, and inactivation methods (95°C, 80°C and UV irradiation) on the mucus adhesion of the probiotic strains was characterized. Evaluation of dog probiotics was supported by cell visualization using transmission electron microscopy (TEM). Higher adhesion percentage was reported for probiotic strains growing in laboratory rather than in manufacturing conditions (P < 0·05). Inactivation by heat (95°C, 80°C) decreased the adhesion properties when strains were cultivated in soy‐based growth media compared with those grown in MRS broth (P < 0·05). TEM observations uncovered differences in cell‐surface components in nonviable forms of probiotic strains as compared with their viable forms.

Conclusions

Manufacturing process conditions such as growth media and pretreatment methods may significantly affect the adhesive ability of the tested strains.

Significance and Impact of the Study

Growth conditions, growth media, pretreatment methods and different probiotic combinations should be carefully considered for quality control of existing probiotics and for identification of new probiotics for dogs. These may also have an impact on health benefits for the host.     

Reliable detection of Bacillus anthracis, Francisella tularensis and Yersinia pestis by using multiplex qPCR including internal controls for nucleic acid extraction and amplification

Background  

Several pathogens could seriously affect public health if not recognized timely. To reduce the impact of such highly pathogenic micro-organisms, rapid and accurate diagnostic tools are needed for their detection in various samples, including environmental samples.     

Life cycle energy and GHG emissions of PET recycling: change-oriented effects

Purpose  

The demand of PET bottles has increased rapidly in the past decades. The purpose of this study is to understand the environmental impact of PET recycling system, in which used bottles are recycled into both fibre and bottles, and to compare the recycling system with single-use PET.     

LCA of the timber sector in Ghana: preliminary life cycle impact assessment (LCIA)

Purpose  

Most life cycle impact assessment (LCIA) approaches in life cycle assessment (LCA) are developed for western countries. Their LCIA approaches and characterization methodologies for different impact categories may not be necessarily relevant to African environmental conditions and particularly not for the timber sector in Ghana. This study reviews the relevance of existing impact categories and LCIA approaches, and uses the most relevant for the timber sector of Ghana.     

Whole life considerations in it procurement

Goal, Scope and Background  

Waste associated with the manufacture, use, and disposal of electronic products, or e-waste, is a growing threat to the environment. IT procurement professionals can have a positive affect against that threat through careful consideration of the environmental awareness of their vendors.     

Life cycle assessment of advertising folders

Purpose

Pulp and paper manufacturing constitutes one of the largest industry segments in term of water and energy usage and total discharges to the environment. More than many other industries, however, this industry plays a key role in sustainable development because its most important raw material, wood fiber, is renewable Dias and Houtman (Environ Prog 23(4):347?C357, 2004). Actually, even if the communication is dominated by electronic media, paper-based communication has a role to play due to its unique practical and aesthetic qualities. This research aims to assess the environmental impact of advertising folders produced with different papers and distributed by a system of Italian consumers?? cooperatives in order to indicate the possible options of improvement and to assess the CO_{2 (eq)} emitted during the entire life cycle.

Methods

Life cycle assessment (LCA) was performed from cradle-to-grave considering paper production, transport from paper mill to printing site, printing, distribution, and disposal. Data for the study were directly collected from specific companies and completed on the basis of literature information. The analysis was conducted using the SimaPro 7.1.5 software and IMPACT 2002+ method to assess all its environmental impact and damage categories.

Results and discussion

LCA analysis indicates that the higher environmental impact is mainly due to paper production and printing processes. The main operations which generate the major impact in the paper production stage are related to the direct or indirect fossil energy use, the production of additives for bleaching operations, and the collection and selection of waste paper. Printing causes relevant impacts for the electricity and ink production and for the aluminum plates used in the offset printing. Moreover, the use of paper with low quantity of additives and small amount of primary fibers causes a reduction of the environmental load of 13.94?%. The major global warming potential value was found for advertising folders made with little amount of mechanical pulp which slightly contributes to the absorption of CO₂.

Conclusions

The analysis pointed out the relevance of the paper production phase and of the printing step within the advertising folders life cycle and allowed to detect the other critical stages of the life cycle. Paper composition greatly affects the environmental impact of the advertising folders?? life cycle.     

Life cycle analysis on the design of induction motors

Purpose  

Herein is reported an application of life cycle analysis (LCA), using the Methodology for the Ecodesign of Energy Using Products (MEEUP), in order to assess the influence of some design parameters in the environmental impact of three-phase induction motors. A motor design procedure to minimize the total environmental impact, based on data obtained from commercial motors, is presented. This procedure is specially intended for the low power range due to the greater potential for energy savings in motors having an output power of 0.75 to 4 kW.     

High performance microbiological transformation of L-tyrosine to L-dopa by <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>NRRL-143

Background  

The 3,4-dihydroxy phenyl L-alanine (L-dopa) is a drug of choice for Parkinson's disease, controlling changes in energy metabolism enzymes of the myocardium following neurogenic injury. Aspergillus oryzae is commonly used for L-dopa production; however, potential improvements in ease of handling, growth rate and environmental impact have led to an interest in exploiting alternative yeasts. The two important elements required for L-dopa production are intracellular tyrosinases (thus pre-grown yeast cells are required for the transformation of L-tyrosine to L-dopa) and L-ascorbate, which acts as a reducing agent.     

Regional LCA in a global perspective. A basis for spatially differentiated environmental life cycle assessment

Background, aim and scope  

In the context of environmental life cycle assessment (LCA), life cycle impact assessment (LCIA) is one of the central issues with respect to modelling and methodological data collection. The thesis described in this paper focusses on the assessment of toxicity-related impacts, and on the collection of normalisation data. A view on the complementary roles of LCA toxicity assessment on the one hand and human and environmental risk assessment (HERA) on the other is presented, and the global, spatially differentiated LCA toxicity assessment model GLOBOX for the assessment of organics and metals is described. Normalisation factors for the year 2000 are calculated on a global as well as on a European level.     

Restaurant and food service life cycle assessment and development of a sustainability standard

Purpose  

There is no clear guidance for responsible food service operations to reduce their environmental footprint, so the efforts put forth by a restaurant may not have the environmental impact intended. As a result, Green Seal conducted life cycle assessment research on restaurants and food service operations to define priorities for environmental improvement. This information was then used to develop a sustainability standard and certification (i.e., ecolabel) program.