Stabilization of quaternary structure of water-soluble quinoprotein glucose dehydrogenase

Water-soluble quinoprotein glucose dehydrogease (PQQGDH-B) is a dimeric enzyme whose application for glucose sensing is the focus of much attention. We attempted to increase the thermal stability of PQQGDH-B by introducing a disulfide bond at the dimer interface. The Ser residue at position 415 was selected for substitution with Cys, as structural information revealed that its side chains face each other at the dimer interface of PQQGDH-B. PQQGDH-B with Ser415Cys showed 30-fold greater thermal stability at 55°C than did the wild-type enzyme without any decrease in catalytic activity. After incubation at 70°C for 10 min, Ser415Cys retained 90% of the GDH activity of the wild-type enzyme. Disulfide bond formation between the mutant subunits was confirmed by analyses with sodium dodecylsulfate-polyacrylamide gel electrophoresis in the presence and absence of reductants. Our results indicate that the introduction of one Cys residue in each monomer of PQQGDH-B resulted in formation of a disulfide bond at the dimer interface and thus achieved a large increase in the thermal stability of the enzyme.     

Surface charge engineering of PQQ glucose dehydrogenase for downstream processing

The ion-exchange chromatography behavior of recombinant glucose dehydrogenase harboring pyrroloquinoline quinone (PQQGDH) was modified to greatly simplify its purification. The surface charge of PQQGDH was engineered by either fusing a three-arginine tail to the C-terminus of PQQGDH (PQQGDH+Arg3) or by substituting three residues exposed on the surface of the enzyme to Arg by site-directed mutagenesis (3RPQQGDH). During cation exchange chromatography, both surface charge-engineered enzymes eluted at much higher salt concentrations than the wild-type enzyme. After the chromatography purification step, both PQQGDH+Arg3 and 3RPQQGDH appeared as single bands on SDS-PAGE, while extra bands appeared with the wild-type protein sample. Although all tested kinetic parameters of both engineered enzymes are similar to those of wild type, both modifications resulted in enzymes with increased thermal stability. Our achievements have resulted in the greater production of an improved quality PQQGDH by a simplified process.     

Increasing the thermal stability of the water-soluble pyrroloquinoline quinone glucose dehydrogenase by single amino acid replacement

Based on the characterization of a PCR mutation of water-soluble glucose dehydrogenase possessing pyrroloquinoline quinone (PQQ), PQQGDH-B, Ser231Cys, we have constructed a series of Ser231 variants. The replacement of Ser231 to Cys, Met, Leu, Asp, Asn, His, or Lys resulted in an increase in thermal stability. Among these variants, Ser231Lys showed the highest level of thermal stability and also showed high catalytic activity. Considering that Ser231Lys showed more than an 8-fold increase in its half-life during the thermal inactivation at 55 degrees C compared with the wild-type enzyme, and also retained catalytic activity similar to a wild-type enzyme, the application of this mutant enzyme as a glucose sensor constituent may develop into a stable glucose sensor construction.     

Engineering subtilisin E for enhanced stability and activity in polar organic solvents

We examined the effect of a novel disulfide bond engineered in subtilisin E from Bacillus subtilis based on the structure of a thermophilic subtilisin-type serine protease aqualysin I. Four sites (Ser163/Ser194, Lys170/Ser194, Lys170/Glu195, and Pro172/Glu195) in subtilisin E were chosen as candidates for Cys substitutions by site-directed mutagenesis. The Cys170/Cys195 mutant subtilisin formed a disulfide bond in B. subtilis, and showed a 5-10-fold increase in specific activity for an authentic peptide substrate for subtilisin, N-succinyl-L-Ala-L-Ala-L-Pro-L-Phe-p-nitroanilide, compared with the single-Cys mutants. However, the disulfide mutant had a 50% decrease in catalytic efficiency due to a smaller k(cat) and was thermolabile relative to the wild-type enzyme, whereas it was greatly stabilized relative to its reduced form. These results suggest that an electrostatic interaction between Lys170 and Glu195 is important for catalysis and stability in subtilisin E. Interestingly, the disulfide mutant was found to be more stable in polar organic solvents, such as dimethylformamide and ethanol, than the wild-type enzyme, even under reducing conditions; this is probably due to the substitution of uncharged Cys by charged surface residues (Lys170 and Glu195). Further, the amino-terminal engineered disulfide bond (Gly61Cys/Ser98Cys) and the mutation Ile31Leu were introduced to enhance the stability and catalytic activity. A prominent 3-4-fold increase in the catalytic efficiency occurred in the quintet mutant enzyme over the range of dimethylformamide concentration (up to 40%).     

Construction of multi-chimeric pyrroloquinoline quinone glucose dehydrogenase with improved enzymatic properties and application in glucose monitoring

A multi-chimeric enzyme was constructed by combining the protein regions responsible for the enzymatic properties of Escherichia coli and Acinetobacter calcoaceticus pyrroloquinoline quinone glucose dehydrogenase (PQQGDH). The constructed multi-chimeric PQQGDH showed increased co-factor binding stability, thermal stability, an alteration in substrate specificity and a 10-fold increase in the K _m value for glucose compared with the wild-type E. coli PQQGDH. The cumulative effect of each introduced protein region on the improvement of enzymatic properties was observed. The application of the multi-chimeric PQQGDH in amperometric glucose sensor construction achieved an expanded dynamic range together with increased operational stability and narrower substrate specificity. The glucose sensor can measure glucose from 5 to 40 mM, suggesting its potential for the direct measurement of high blood-glucose levels in diabetic patients.     

The isocitrate dehydrogenase kinase/phosphatase from Escherichia coli is highly sensitive to in-vitro oxidative conditions role of cysteine67 and cysteine108 in the formation of a disulfide-bonded homodimer.

Isocitrate dehydrogenase kinase/phosphatase (IDHK/P) is a homodimeric enzyme which controls the oxidative metabolism of Escherichia coli, and exibits a high intrinsic ATPase activity. When subjected to electrophoresis under nonreducing conditions, the purified enzyme migrates partially as a dimer. The proportion of the dimer over the monomer is greatly increased by treatment with cupric 1,10 phenanthrolinate or 5,5'-dithio-bis(2-nitrobenzoic acid), and fully reversed by dithiothreitol, indicating that covalent dimerization is produced by a disulfide bond. To identify the residue(s) involved in this intermolecular disulfide-bond, each of the eight cysteines of the enzyme was individually mutated into a serine. It was found that, under nonreducing conditions, the electrophoretic patterns of all corresponding mutants are identical to that of the wild-type, except for the Cys67-->Ser which migrates exclusively as a monomer and for the Cys108-->Ser which migrates preferentially as a dimer. Furthermore, in contrast to the wild-type enzyme and all the other mutants, the Cys67-->Ser mutant still migrates as a monomer after treatment with cupric 1,10 phenanthrolinate. This result indicates that the intermolecular disulfide bond involves only Cys67 in each IDHK/P wild-type monomer. This was further supported by mass spectrum analysis of the tryptic peptides derived from either the cupric 1,10 phenanthrolinate-treated wild-type enzyme or the native Cys108-->Ser mutant, which show that they both contain a Cys67-Cys67 disulfide bond. Moreover, both the cupric 1,10 phenanthrolinate-treated wild-type enzyme and the native Cys108-->Ser mutant contain another disulfide bond between Cys356 and Cys480. Previous results have shown that this additional Cys356-Cys480 disulfide bond is intramolecular [Oudot, C., Jault, J.-M., Jaquinod, M., Negre, D., Prost, J.-F., Cozzone, A.J. & Cortay, J.-C. (1998) Eur. J. Biochem. 258, 579-585].     

Characterization of catalytic centre mutants of macrophage migration inhibitory factor (MIF) and comparison to Cys81Ser MIF.

Macrophage migration inhibitory factor (MIF) displays both cytokine and enzyme activities, but its molecular mode of action is still unclear. MIF contains three cysteine residues and we showed recently that the conserved Cys57-Ala-Leu-Cys60 (CALC) motif is critical for the oxidoreductase and macrophage-activating activities of MIF. Here we probed further the role of this catalytic centre by expression, purification, and characterization of the cysteine-->serine mutants Cys60Ser, Cys57Ser/Cys60Ser, and Cys81Ser of human MIF and of mutants Ala58Gly/Leu59Pro and Ala58Gly/Leu59His, containing a thioredoxin (Trx)-like and protein disulphide isomerase (PDI)-like dipeptide, respectively. The catalytic centre mutants formed inclusion bodies and the resultant mutant proteins Cys57Ser/Cys60Ser, Ala58Gly/Leu59Pro, and Als58Gly/Leu59His were only soluble in organic solvent or 6 m GdmHCl when reconstituted at concentrations above 1 microgram.mL-1. This made it necessary to devise new purification methods. By contrast, mutant Cys81Ser was soluble. Effects of pH, solvent, and ionic strength conditions on the conformation of the mutants were analysed by far-UV CD spectropolarimetry and mutant stability was examined by denaturant-induced unfolding. The mutants, except for mutant Cys81Ser, showed a close conformational similarity to wild-type (wt) MIF, and stabilization of the mutants was due mainly to acid pH conditions. Intramolecular disulphide bond formation at the CALC region was confirmed by near-UV CD of mutant Cys60Ser. Mutant Cys81Ser was not involved in disulphide bond formation, yet had decreased stability. Analysis in the oxidoreductase and a MIF-specific cytokine assay revealed that only substitution of the active site residues led to inactivation of MIF. Mutant Cys60Ser had no enzyme and markedly reduced cytokine activity, whereas mutant Cys81Ser was active in both tests. The Trx-like variant showed significant enzyme activity but was less active than wtMIF; PDI-like MIF was enzymatically inactive. However, both variants had full cytokine activity. Together with the low but nonzero cytokine activity of mutant Cys60Ser, this indicated that the cytokine activity of MIF may not be tightly regulated by redox effects or that a distinguishable receptor mechanism exists. This study provides evidence for a role of the CALC motif in the oxidoreductase and cytokine activities of MIF, and suggests that Cys81 could mediate conformational effects. Availability and characterization of the mutants should greatly aid in the further elucidation of the mechanism of action of the unusual cytokine MIF.     

Thermodynamic and kinetic destabilization of triosephosphate isomerase resulting from the mutation of conserved and non-conserved cysteines

Several variants of Saccharomyces cerevisiae triosephosphate isomerase (yTIM) were studied to determine how mutations of conserved and non-conserved Cys residues affect the enzyme. Wild-type yTIM has two buried free cysteines: Cys 41 (non-conserved) and the invariant Cys 126. Single-site mutants, containing substitutions of these cysteines with Ala, Val, or Ser (the three most conservative changes for a buried Cys, according to substitution matrices), were examined for stability and enzymatic activity. Neither of the Cys residues was found to be essential for enzyme catalysis. Determination of the global stability of the mutants indicated that, regardless of which Cys was substituted, individual Cys→Ala and Cys→Val mutations, as well as the C41S substitution, all decrease the unfolding free energy of the dimeric protein by less than 23 kJ mol(-1) (at 37 °C, pH 7.4), as compared to the wild-type enzyme. In contrast, a substantially larger destabilization (37 kJ mol(-1)) was found in the C126S mutant. These results suggest that, with the exception of C126S, all of these mutations can be regarded as neutral (i.e., mutations that do not impair the reproductive success of the organism). Accordingly, Cys 126 has remained invariant across evolution because its neutral substitutions by Ala or Val would require a highly unlikely, concerted double mutation at any of the Cys codons. Furthermore, detrimental effects to a cell expressing the C126S TIM mutant more likely arise from the high unfolding rate of this enzyme.     

Serine-376 contributes to the binding of substrate by ribulose-bisphosphate carboxylase/oxygenase from Anacystis nidulans.

Site-directed mutagenesis was used to change Ser376 in the active site of ribulose-1,5-bisphosphate carboxylase/oxygenase from the cyanobacterium Anacystis nidulans to Cys, Thr, or Ala. When expressed in Escherichia coli and purified, the mutant enzymes exhibited carboxylase activities that were reduced by 99% or more with respect to the activity of the wild-type enzyme. The Km values for ribulose bisphosphate at pH 8.0, 30 degrees C, were elevated from 46 microM for wild-type enzyme to 287, 978, and 81 microM for mutants in which Cys, Thr, or Ala, respectively, replaced Ser376. The Cys and Thr variants were almost devoid of oxygenase activity whereas the Ala variant had 16% as much oxygenase as wild-type enzyme, suggesting that this mutation had greatly elevated the oxygenase:carboxylase ratio.     

In vivo formation and stability of engineered disulfide bonds in subtilisin

Computer modeling suggested that a disulfide bond could be built into Bacillus amyloliquefaciens subtilisin between positions 22 (wild-type, Thr) and 87 (Ser) or between positions 24 (Ser) and 87 (Ser). Single cysteines were introduced into this cysteine-free protease at positions 22, 24, or 87 by site-directed mutagenesis of the cloned subtilisin gene. The corresponding double-cysteine mutants were constructed, and recombinant plasmids were expressed in Bacillus subtilis. Double-cysteine mutant enzymes were secreted as efficiently as wild-type, and disulfide bonds were formed quantitatively in vivo. These disulfide bonds were introduced approximately 24 A away from the catalytic site and had no detectable effect on either the specific activities or the pH optima of the mutant enzymes. The equilibrium constants for the reduction of the mutant disulfide bonds by dithiothreitol were determined to be 82 +/- 22 and 20 +/- 5 for Cys22/Cys87 and Cys24/Cys87, respectively. Studies of autoproteolytic inactivation of wild-type subtilisin support a relationship between autolytic stability and conformational stability of the protein. The stabilities of Cys24/Cys87 and wild-type enzymes to autolysis were essentially the same; however, Cys22/Cys87 was actually less stable to autolysis. Reduction of the disulfide cross-bridge lowered the autolytic stability of both double-cysteine mutants relative to their disulfide forms. This correlates with a lowered autolytic stability for the Cys22 and Cys87 single-cysteine mutants, and the fact that an intramolecular hydrogen bond between the hydroxyl groups of Thr22 and Ser87 is likely to be disrupted in the Cys22 and Cys87 single-cysteine mutant proteins.     

Enhancement of the thermal stability of pyroglutamyl peptidase I by introduction of an intersubunit disulfide bond.

From the comparison of the three-dimensional structure of mesophilic pyroglutamyl peptidase from Bacillus amyloliquefaciens and the thermophilic enzyme from Thermococcus litoralis, the intersubunit disulfide bond was estimated to be one of the factors for thermal stability. Since Ser185 was corresponded to Cys190 of the thermophilic enzyme by sequence alignment, the Ser185 residue was replaced with cysteine by site-directed mutagenesis. The S185C mutant enzyme appeared to form a disulfide bond, which was confirmed by SDS-PAGE with and without 2-mercaptoethanol. The mutant enzyme showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. However, the thermal stability of the S185C mutant was found to be 30 degrees C higher than that of wild-type. Thus the introduction of a disulfide bond enhanced thermal stability without changing the catalytic efficiency of the enzyme.     

Identification of essential amino acid residues for catalytic activity and thermostability of novel chitosanase by site-directed mutagenesis

The functional importance of a conserved region in a novel chitosanase from Bacillus sp. CK4 was investigated. Each of the three carboxylic amino acid residues (Glu-50, Glu-62, and Asp-66) was changed to Asp and Gln or Asn and Glu by site-directed mutagenesis, respectively. The Asp-66-->Asn and Asp-66-->Glu mutation remarkably decreased kinetic parameters such as Vmax and kcat to approximately 1/1,000 those of the wild-type enzyme, indicating that the Asp-66 residue was essential for catalysis. The thermostable chitosanase contains three Cys residues at positions 49, 72, and 211. The Cys-49-->Ser/Tyr and Cys-72-->Ser/Tyr mutant enzymes were as stable to thermal inactivation and denaturating agents as the wild-type enzyme. However, the half-life of the Cys-211-->Ser/Tyr mutant enzyme was less than 10 min at 80 degrees C, while that of the wild-type enzyme was about 90 min. Moreover, the residual activity of Cys-211-->Ser/Tyr enzyme was substantially decreased by 8 M urea; and it lost all catalytic activity in 40% ethanol. These results show that the substitution of Cys with any amino acid residues at position 211 seems to affect the conformational stability of the chitosanase.     

Stabilization of pyrroloquinoline quinone glucose dehydrogenase by cross-linking chemical modification

Summary Cross-linking chemical modification of pyrroloquinoline quinone (PQQ) glucose dehydrogenase (GDH) by glutaraldehyde was carried out and its stability was analyzed. Although native PQQGDH was inactivated within 30 min at a higher temperature than 50 °C, cross-linked PQQGDH retained more than 40% of initial activity even after 30 min of incubation at 54 °C. In addition to the increase in thermal stability, cross-linked PQQGDH gained high EDTA tolerance. The stabilization may be achieved by increased the rigidity of PQQGDH holo enzyme conformation.     

Stability of wild-type and mutant RTEM-1 beta-lactamases: effect of the disulfide bond

Uniquely among class A beta-lactamases, the RTEM-1 and RTEM-2 enzymes contain a single disulfide bond between Cys 77 and Cys 123. To study the possible role of this naturally occurring disulfide in stabilizing RTEM-1 beta-lactamase and its mutants at residue 71, this bond was removed by introducing a Cys 77----Ser mutation. Both the wild-type enzyme and the single mutant Cys 77----Ser confer the same high levels of resistance to ampicillin in vivo to Escherichia coli; at 30 degrees C the specific activity of purified Cys 77----Ser mutant is also the same as that of the wild-type enzyme. Also, neither wild-type enzyme nor the Cys 77----Ser mutant is inactivated by brief exposure to p-hydroxymercuribenzoate. However, above 40 degrees C the mutant enzyme is less stable than wild-type enzyme. After introduction of the Cys 77----Ser mutation, none of the double mutants (containing the second mutations at residue 71) confer resistance to ampicillin in vivo at 37 degrees C; proteins with Ala, Val, Leu, Ile, Met, Pro, His, Cys, and Ser at residue 71 confer low levels of resistance to ampicillin in vivo at 30 degrees C. The use of electrophoretic blots stained with antibodies against beta-lactamase to analyze the relative quantities of mutant proteins in whole-cell extracts of E. coli suggests that all 19 of the doubly mutant enzymes are proteolyzed much more readily than their singly mutant analogues (at Thr 71) that contain a disulfide bond.(ABSTRACT TRUNCATED AT 250 WORDS)     

Properties of Cys21-mutated muscle acylphosphatases

Cys21 is an invariant residue in muscle acylphosphatases, but is absent in the erythrocyte isozymes. To assess the importance of this residue in the muscle isozymes for catalytic, structural, and stability properties, two gene mutants have been prepared by oligonucleotide-directed mutagenesis and expressed inEscherichia coli cells; in these mutants, the codon for Cys21 was replaced by those for Ser and Ala, respectively. The two mutant enzymes, purified by immunoaffinity chromatography, showed kinetic and structural properties similar to those of the wild-type recombinant enzyme; however, the specific activity of the two mutants, especially that of the C21A mutant, was lower. The urea and thermal stabilities of the mutant enzymes were reduced with respect to those of the wild-type form, contrary to the susceptibility to inactivation by mercuric ions. The reported data support the possibility that Cys21 is involved in the stabilization of the enzyme active-site conformation.     

Crystal structure of the double azurin mutant Cys3Ser/Ser100Pro from Pseudomonas aeruginosa at 1.8 A resolution: its folding-unfolding energy and unfolding kinetics

Azurin is a cupredoxin, which functions as an electron carrier. Its fold is dominated by a beta-sheet structure. In the present study, azurin serves as a model system to investigate the importance of a conserved disulphide bond for protein stability and folding/unfolding. For this purpose, we have examined two azurin mutants, the single mutant Cys3Ser, which disrupts azurin's conserved disulphide bond, and the double mutant Cys3Ser/Ser100Pro, which contains an additional mutation at a site distant from the conserved disulphide. The crystal structure of the azurin double mutant has been determined to 1.8 A resolution(2), with a crystallographic R-factor of 17.5% (R(free)=20.8%). A comparison with the wild-type structure reveals that structural differences are limited to the sites of the mutations. Also, the rates of folding and unfolding as determined by CD and fluorescence spectroscopy are almost unchanged. The main difference to wild-type azurin is a destabilisation by approximately 20 kJ x mol(-1), constituting half the total folding energy of the wild-type protein. Thus, the disulphide bond constitutes a vital component in giving azurin its stable fold.     

Role of disulfide bonds in goose-type lysozyme

The role of the two disulfide bonds (Cys4-Cys60 and Cys18-Cys29) in the activity and stability of goose-type (G-type) lysozyme was investigated using ostrich egg-white lysozyme as a model. Each of the two disulfide bonds was deleted separately or simultaneously by substituting both Cys residues with either Ser or Ala. No remarkable differences in secondary structure or catalytic activity were observed between the wild-type and mutant proteins. However, thermal and guanidine hydrochloride unfolding experiments revealed that the stabilities of mutants lacking one or both of the disulfide bonds were significantly decreased relative to those of the wild-type. The destabilization energies of mutant proteins agreed well with those predicted from entropic effects in the denatured state. The effects of deleting each disulfide bond on protein stability were found to be approximately additive, indicating that the individual disulfide bonds contribute to the stability of G-type lysozyme in an independent manner. Under reducing conditions, the thermal stability of the wild-type was decreased to a level nearly equivalent to that of a Cys-free mutant (C4S/C18S/C29S/C60S) in which all Cys residues were replaced by Ser. Moreover, the optimum temperature of the catalytic activity for the Cys-free mutant was downshifted by about 20 degrees C as compared with that of the wild-type. These results indicate that the formation of the two disulfide bonds is not essential for the correct folding into the catalytically active conformation, but is crucial for the structural stability of G-type lysozyme.     

Mutant subtilisin E with enhanced protease activity obtained by site-directed mutagenesis

The specific activity of subtilisin E, an alkaline serine protease of Bacillus subtilis, was substantially increased by optimizing the amino acid residue at position 31 (Ile in the wild-type enzyme) in the vicinity of the catalytic triad of the enzyme. Eight uncharged amino acids (Cys, Ser, Thr, Gly, Ala, Val, Leu, and Phe) were introduced at this site, which is next to catalytic Asp32, using site-directed mutagenesis. Mutant enzymes were expressed in Escherichia coli and were prepared from the periplasmic space. Only the Val and Leu substitutions gave active enzyme, and the Leu31 mutant was found to have a greatly increased activity compared to the wild-type enzyme. The other six mutant enzymes showed a marked decrease in activity. This result indicates that a branched-chain amino acid at position 31 is essential for the expression of subtilisin activity and that the level of the activity depends on side chain structure. The purified Leu31 mutant enzyme was analyzed with respect to substrate specificity, heat stability, and optimal temperature. It was found that the Leu31 replacement caused a prominent 2-6-fold increase in catalytic efficiency (kcat/Km) due to a larger kcat for peptide substrates.     

Fabrication of a chitosan/glucose oxidase-poly(anilineboronic acid)-Au(nano)/Au-plated Au electrode for biosensor and biofuel cell

Enzyme immobilization is one of the key factors in constructing high-performance enzyme biosensors and biofuel cells (BFCs). Herein, we propose a new protocol for efficient immobilization of a glycoprotein enzyme based on the interaction of the 1, 2- or 1, 3-diols in the glycoprotein with a boronic acid functionalized monomer. Briefly, casting a mixture of glucose oxidase (GOx) and anilineboronic acid (ABA) followed by a NaAuCl(4) solution to an Au-plated Au electrode surface yielded a GOx-poly(ABA) (PABA)-gold nanoparticle (Au(nano)) bionanocomposite, and chitosan (CS) was then cast and air-dried. In the present protocol, the small-sized Au(nano) or Au subnanostructures can form near/on the enzyme molecule, which greatly promotes the electron transfer of enzymatic reaction and enhances the amperometric responses. The thus-prepared CS/GOx-PABA-Au(nano)/Au-plated Au electrode worked well in the first-/second generation biosensing modes and as a bioanode in a monopolar biofuel cell, with analytical or cell-power performance superior to those of most analogues hitherto reported.     

High-performance bioanode based on the composite of CNTs-immobilized mediator and silk film-immobilized glucose oxidase for glucose/O2 biofuel cells

A high-performance bioanode based on the composite of carbon nanotubes (CNTs)-immobilized mediator and silk film (SF)-immobilized glucose oxidase (GOD) was developed for glucose/O(2) biofuel cell (BFC). Ferrocenecarboxaldehyde (Fc) was used as the mediator and covalently immobilized on the ethylenediamine (EDA)-functionalized CNTs (CNTs-EDA). GOD was cross-linked on the SF with glutaraldehyde (GA) as the cross-linking agent. The resulting electrode (CNTs-Fc/SF-GOD/glassy carbon (GC) electrode) exhibited good catalytic activity towards glucose oxidation and excellent stability. For the assembled glucose/O(2) BFC with the CNTs-Fc/SF-GOD/GC electrode as the bioanode and a commercial E-TEK Pt/C modified GC electrode as the cathode, the open circuit potential is 0.48 V and the maximum power density of 50.70 μW cm(-2) can be achieved at 0.15 V.