Kinetics of biomass catalytic pyrolysis

The Coats–Redfern method was used to analyze the kinetic characteristics of biomass catalytic pyrolysis, indicating that it can be described by multi-step reactions, rather than as a simple first-order reaction. Friedman model-free calculations were used to describe the starting reaction types and the corresponding initial kinetic parameters. Finally, nonlinear regression of biomass catalytic pyrolysis showed that the reaction mechanism of the whole process could be kinetically characterized by three successive reactions: a one-dimensional diffusion reaction, followed by an apparent first-order reaction, and then by a two-dimensional diffusion reaction. The kinetic parameters and equations were also calculated.     

Production of hydrocarbon fuels from biomass using catalytic pyrolysis under helium and hydrogen environments

This study is focused on hydrocarbon production through changing carrier gas and using zeolite catalysts during pyrolysis. A large reduction in high molecular weight, oxygenated compounds was noticed when the carrier gas was changed from helium to hydrogen during pyrolysis. A catalytic pyrolysis was conducted using two different methods based on how the biomass and catalysts were contacted together. For both methods, there was no significant change in the carbon yield with the change in pyrolysis environment. However, the mixing-method produced higher aromatic hydrocarbons than the bed-method. In addition, two methods were also tested using two ratios of biomass to catalyst. Nonetheless, there was no significant increase in hydrocarbon yield as the catalyst loading was increased from two to five times of biomass in the catalyst-bed method. In contrast to this, a significant increase was noticed for the catalytic-mixing method when the biomass to catalyst loading was increased from 1:4 to 1:9.     

A review of thermal-chemical conversion of lignocellulosic biomass in China

Biomass, a renewable, sustainable and carbon dioxide neutral resource, has received widespread attention in the energy market as an alternative to fossil fuels. Thermal-chemical conversion of biomass to produce biofuels is a promising technology with many commercial applications. This paper reviewed the state-of-the-art research and development of thermal-chemical conversion of biomass in China with a special focus on gasification, pyrolysis, and catalytic transformation technologies. The advantages and disadvantages, potential of future applications, and challenges related to these technologies are discussed. Conclusively, these transformation technologies for the second-generation biofuels with using non-edible lignocellulosic biomass as feedstocks show prosperous perspective for commercial applications in near future.     

In-situ upgrading of biomass pyrolysis vapors: catalyst screening on a fixed bed reactor

In-situ catalytic upgrading of biomass fast pyrolysis vapors was performed in a fixed bed bench-scale reactor at 500 °C, for catalyst screening purposes. The catalytic materials tested include a commercial equilibrium FCC catalyst (E-cat), various commercial ZSM-5 formulations, magnesium oxide and alumina materials with varying specific surface areas, nickel monoxide, zirconia/titania, tetragonal zirconia, titania and silica alumina. The bio-oil was characterized measuring its water content, the carbon-hydrogen-oxygen (by difference) content and the chemical composition of its organic fraction. Each catalytic material displayed different catalytic effects. High surface area alumina catalysts displayed the highest selectivity towards hydrocarbons, yielding however low organic liquid products. Zirconia/titania exhibited good selectivity towards desired compounds, yielding higher organic liquid product than the alumina catalysts. The ZSM-5 formulation with the highest surface area displayed the most balanced performance having a moderate selectivity towards hydrocarbons, reducing undesirable compounds and producing organic liquid products at acceptable yields.     

熔盐热裂解生物质制生物油

为探讨热裂解条件对熔盐中生物质热裂解制生物油的影响,在自行设计的反应器中,以摩尔比为7∶6的ZnCl2-KCl混合熔盐作为热裂解的热载体、催化剂和分散剂,考察了500 ℃时添加的金属盐和生物质原料的影响,并采用气相色谱-质谱仪 (GC-MS) 对生物油的主要组成进行了分析。结果表明：添加的金属盐显著影响热裂解产物得率,稀土金属盐显著提高生物油得率,降低生物油的含水率,添加摩尔分数为5.0％ LaCl3时生物油得率为32.0％,含水率为61.5％;水稻秸秆热裂解的生物油和焦炭得率较高,稻壳热裂解的气体得率较高;金属添加盐对生物油组成有较强的选择性,LiCl和FeCl2对生物质向小分子裂解具有较强的催化作用,而CrCl3、CaCl2和LaCl3对生物油二次裂解具有抑制作用。研究结果为熔盐热裂解生物质制生物油提供了参考。     

Comparative study of pyrolysis of algal biomass from natural lake blooms with lignocellulosic biomass

Pyrolysis experiments were performed with algal and lignocellulosic feedstocks under similar reactor conditions for comparison of product (bio-oil, gas and bio-char) yields and composition. In spite of major differences in component bio-polymers, feedstock properties relevant to thermo-chemical conversions, such as overall C, H and O-content, C/O and H/C molar ratio as well as calorific values, were found to be similar for algae and lignocellulosic material. Bio-oil yields from algae and some lignocellulosic materials were similar; however, algal bio-oils were compositionally different and contained several N-compounds (most likely from protein degradation). Algal bio-char also had a significantly higher N-content. Overall, our results suggest that it is feasible to convert algal cultures deficient in lipids, such as nuisance algae obtained from natural blooms, into liquid fuels by thermochemical methods. As such, pyrolysis technologies being developed for lignocellulosic biomass may be directly applicable to algal feedstocks as well.     

Development of a supported tri-metallic catalyst and evaluation of the catalytic activity in biomass steam gasification

A supported tri-metallic catalyst (nano-Ni–La–Fe/γ-Al₂O₃) was developed for tar reduction and enhanced hydrogen production in biomass steam gasification, with focuses on preventing coke deposition and sintering effects to lengthen the lifetime of developed catalysts. The catalyst was prepared by deposition–precipitation method and characterized by various analytical approaches. Following that, the activity of catalysts in biomass steam gasification was investigated in a bench-scale combined fixed bed reactor. With presence of the catalyst, the content of hydrogen in gas products was increased to over 10 vol.%, the tar removal efficiency reached 99% at 1073 K, and more importantly the coke deposition on the catalyst surfaces and sintering effects were avoided, leading to a long lifetime of catalysts.     

Pretreatment of empty palm fruit bunch for production of chemicals via catalytic pyrolysis

The effect of chemical pretreatments using NaOH, H₂O₂, and Ca(OH)₂ on Empty Palm Fruit Bunches (EPFB) to degrade EPFB lignin before pyrolyis was investigated. Spectrophotometer analysis proved consecutive addition of NaOH and H₂O₂ decomposed almost 100% of EPFB lignin compared to 44% for the Ca(OH)₂, H₂O₂ system while NaOH and Ca(OH)₂ used exclusively could not alter lignin much. Next, the pretreated EPFB was catalytically pyrolyzed. Experimental results indicated the phenolic yields over Al-MCM-41 and HZSM-5 catalysts were 90 wt% and 80 wt%, respectively compared to 67 wt% yield for the untreated sample under the same set of conditions. Meanwhile, the experiments with HY zeolite yielded 70 wt% phenols.     

Development of biocatalysts for production of commodity chemicals from lignocellulosic biomass

Lignocellulosic biomass is recognized as potential sustainable source for production of power, biofuels and variety of commodity chemicals which would potentially add economic value to biomass. Recalcitrance nature of biomass is largely responsible for the high cost of its conversion. Therefore, it is necessary to introduce some cost effective pretreatment processes to make the biomass polysaccharides easily amenable to enzymatic attack to release mixed fermentable sugars. Advancement in systemic biology can provide new tools for the development of such biocatalysts for sustainable production of commodity chemicals from biomass. Integration of functional genomics and system biology approaches may generate efficient microbial systems with new metabolic routes for production of commodity chemicals. This paper provides an overview of the challenges that are faced by the processes converting lignocellulosic biomass to commodity chemicals. The critical factors involved in engineering new microbial biocatalysts are also discussed with more emphasis on commodity chemicals.     

操作条件对生物质催化热解产轻质芳烃的影响

以轻质芳烃苯、甲苯、二甲苯以及萘（BTXN）为目的产物,采用双颗粒流化床对松木进行了催化热分解实验。讨论了催化剂CoMo-B加氢催化作用下,静止床高、流化气速、床层压降的相互关系,得到了一个合适的操作条件,为热分解实验提供了必要的基础实验数据。在热分解实验中,调查了操作气速、床层高度以及热解温度对产物收率和分布的影响,得到了中间产物苯、甲苯、二甲苯和萘等轻质芳烃化合物最高收率为6．3％下的最佳操作条件：催化剂为CoMo-B,气速2．0cm／s,床层高度为0．08m,热解温度863K。     

Pretreatment strategies for microbial valorization of bio‐oil fractions produced by fast pyrolysis of ash‐rich lignocellulosic biomass

This work evaluates a biorefinery approach for microbial valorization of bio‐oil fractions produced by fast pyrolysis of ash‐rich lignocellulosic biomass. Different methods are presented for the pretreatment of the low‐sugar complex bio‐oil consisting of organic condensate (OC) and aqueous condensate (AC) to overcome their strong inhibitory effects and unsuitability for common analytical methods. Growth of Pseudomonas putida KT2440, which was chosen as a reference system, on untreated bio‐oil fractions was only detectable using solid medium with OC as sole carbon source. Utilization of a pretreated OC which was filtered, autoclaved, neutralized and centrifuged enabled growth in liquid medium with significant remaining optical instability. By subjecting the pretreated fractions to solid phase extraction, more stable and less inhibitory bio‐oil fractions could be obtained enabling the appliance of common analytical methods. Furthermore, this pretreatment facilitated growth of the applied reference organism Pseudomonas putida KT2440. As there is currently no convincing strategy for reliable application of bio‐oil as a sole source of carbon in industrial biotechnology, the presented work depicts a first step toward establishing bio‐oil as a future sustainable feedstock for a bio‐based economy.     

Tar reduction in pyrolysis vapours from biomass over a hot char bed

The behaviour of pyrolysis vapours over char was investigated in order to maximise tar conversion for the development of a new fixed bed gasifier. Wood samples were decomposed at a typical pyrolysis temperature (500 °C) and the pyrolysis vapours were then passed directly through a tar cracking zone in a tubular reactor. The product yields and properties of the condensable phases and non-condensable gases were studied for different bed lengths of char (0–450 mm), temperatures (500–800 °C), particle sizes (10 and 15 mm) and nitrogen purge rates (1.84–14.70 mm/s). The carbon in the condensable phases showed about 66% reduction by a 300 mm long char section at 800 °C, compared to that for pyrolysis at 500 °C. The amount of heavy condensable phase decreased with increasing temperature from about 18.4 wt% of the biomass input at 500 °C to 8.0 wt% at 800 °C, forming CO, H₂ and other light molecules. The main mode of tar conversion was found to be in the vapour phase when compared to the results without the presence of char. The composition of the heavy condensable phase was simplified into much fewer secondary and tertiary tar components at 800 °C. Additional measures were required to maximise the heterogeneous effect of char for tar reduction.     

Adsorption of Phenolic Compounds and Methylene Blue onto Activated Carbon Prepared from Date Fruit Pits

Activated carbon has been prepared from date fruit pits. The carbon, prepared at different burn‐off rates, showed a high uptake of methylene blue. At 92 % burn‐off (weight loss percent of the carbonized pits upon activation), methylene blue uptake was 590 mg/g. With this high capacity, the carbon was then used to study the adsorption of phenol, 2‐nitrophenol, 2,4‐dinitrophenol, and 2,4,6‐trinitrophenol. The prepared activated carbon showed an adsorption capacity better than that of many activated carbons in current use. The experimental adsorption data for the single components were regressed using both Langmuir and Freundlich isotherm models and the fit was generally satisfactory. The experimental adsorption data of the binary system phenol‐2‐nitrophenol were compared with the predicted results using two predictive models: the generalized Langmuir and the IAS models. The data were better represented by the IAS theory than the generalized Langmuir model even though the fit of the experimental data was not adequate.     

Acetic acid and lithium chloride effects on hydrothermal carbonization of lignocellulosic biomass

As a renewable non-food resource, lignocellulosic biomass has great potential as an energy source or feedstock for further conversion. However, challenges exist with supply logistics of this geographically scattered and perishable resource. Hydrothermal carbonization treats any kind of biomass in 200 to 260 °C compressed water under an inert atmosphere to produce a hydrophobic solid of reduced mass and increased fuel value. A maximum in higher heating value (HHV) was found when 0.4 g of acetic acid was added per g of biomass. If 1 g of LiCl and 0.4 g of acetic acid were added per g of biomass to the initial reaction solution, a 30% increase in HHV was found compared to the pretreatment with no additives, along with greater mass reduction. LiCl addition also reduces reaction pressure. Addition of acetic acid and/or LiCl to hydrothermal carbonization each contribute to increased HHV and reduced mass yield of the solid product.     

Catalytic pyrolysis of tobacco rob: kinetic study and fuel gas produced

The pyrolysis kinetics of tobacco rob (TR) was investigated using thermogravimetric analysis (TGA) under inert atmosphere, adding chemicals (dolomite and NiO) as catalysts by catalytic-mixing method. The TGA results showed that mass loss and mass loss rates were affected by catalysts. The conversion rates increased while the activation energy decreased. Moreover, the thermal decomposition behaviors of TR were studied in the fixed-bed reactor using dolomite and NiO/γ-Al₂O₃ as catalysts by catalyst-bed method. A series of experiments had been performed to explore the effects of catalysts, and reaction temperature on the composition and yield of fuel gas. The experiments demonstrated that the catalysts had a high activity of cracking tar and hydrocarbons, as well as yielding a high fuel gas production. For both methods, dolomite and NiO revealed better catalytic performance as a view of enhancing conversion rates and increasing product gas yield.     

Effect of hot vapor filtration on the characterization of bio-oil from rice husks with fast pyrolysis in a fluidized-bed reactor

To produce high quality bio-oil from biomass using fast pyrolysis, rice husks were pyrolyzed in a 1-5 kg/h bench-scale fluidized-bed reactor. The effect of hot vapor filtration (HVF) was investigated to filter the solid particles and bio-char. The results showed that the total bio-oil yield decreased from 41.7% to 39.5% by weight and the bio-oil had a higher water content, higher pH, and lower alkali metal content when using HVF. One hundred and twelve different chemical compounds were detected by gas chromatography-mass spectrometry (GC-MS). The molecular weight of the chemical compounds from the condenser and the EP when the cyclone was coupled with HVF in the separation system decreased compared with those from the condenser and EP when only cyclone was used.     

Characterization of mesoporous activated carbons prepared by pyrolysis of sewage sludge with pyrolusite

Activated carbons were prepared from sewage sludge by chemical activation. Pyrolusite was added as a catalyst during activation and carbonization. The influence of the mineral addition on the properties of the activated carbons produced was evaluated. The results show that activated carbons from pyrolusite-supplemented sewage sludge had up to a 75% higher BET surface area and up to a 66% increase in mesoporosity over ordinary sludge-based activated carbons. Batch adsorption experiments applying the prepared adsorbents to synthetic dye wastewater treatment yielded adsorption data well fitted to the Langmuir isotherm. The adsorbents from pyrolusite-supplemented sludges performed better in dye removal than those without mineral addition, with the carbon from pyrolusite-augmented sludge T2 presenting a significant increase in maximum adsorption capacity of 50 mg/g. The properties of the adsorbents were improved during pyrolusite-catalyzed pyrolysis via enhancement of mesopore production, thus the mesopore channels may provide fast mass transfer for large molecules like dyes.     

Estimating fossil biomass from skeletal mass in marine invertebrates

Palaeoecology uses the numerical abundance and the occurrence of species to evaluate the dynamics of past communities, but biomass – the quantity of soft tissue – is the critical currency needed to capture the flow and role of nutrients in modern ecosystems. Acquiring biomass data from fossil assemblages has, however, remained challenging, thus limiting the analysis of net secondary production in palaeocommunities. Prior models relate shell size or shell biovolume to fossil biomass. These models neglect shell fragments and, moreover, use units of biovolume (cm³) that are not directly related to those of biomass (g), making the models difficult to tune and the coefficients highly specific. To remedy these shortcomings, I evaluate skeletal mass as a means of estimating the soft tissue biomass of fossil taxa, using ratios among biomass, skeletal mass and the total wet mass of living representatives of extant species, so that skeletal mass alone can be used to estimate grams of organic biomass. Data on total wet mass, organic carbon mass, and shell mass were acquired from more than 80 live‐collected individuals from eight families in three major, shelly macrobenthic groups (Mollusca, Brachiopoda, Arthropoda) and supplemented with counterpart data from the literature to increase taxonomic breadth. This new shell‐mass model provides more accurate and precise biomass estimates than models based on the linear dimensions of shells, expanding our ability to examine the interplay between organisms and their environments.