The Effect of Phylogenetically Different Bacteria on the Fitness of Pseudomonas fluorescens in Sand Microcosms

In most environments many microorganisms live in close vicinity and can interact in various ways. Recent studies suggest that bacteria are able to sense and respond to the presence of neighbouring bacteria in the environment and alter their response accordingly. This ability might be an important strategy in complex habitats such as soils, with great implications for shaping the microbial community structure. Here, we used a sand microcosm approach to investigate how Pseudomonas fluorescens Pf0-1 responds to the presence of monocultures or mixtures of two phylogenetically different bacteria, a Gram-negative (Pedobacter sp. V48) and a Gram-positive (Bacillus sp. V102) under two nutrient conditions. Results revealed that under both nutrient poor and nutrient rich conditions confrontation with the Gram-positive Bacillus sp. V102 strain led to significant lower cell numbers of Pseudomonas fluorescens Pf0-1, whereas confrontation with the Gram-negative Pedobacter sp. V48 strain did not affect the growth of Pseudomonas fluorescens Pf0-1. However, when Pseudomonas fluorescens Pf0-1 was confronted with the mixture of both strains, no significant effect on the growth of Pseudomonas fluorescens Pf0-1 was observed. Quantitative real-time PCR data showed up-regulation of genes involved in the production of a broad-spectrum antibiotic in Pseudomonas fluorescens Pf0-1 when confronted with Pedobacter sp. V48, but not in the presence of Bacillus sp. V102. The results provide evidence that the performance of bacteria in soil depends strongly on the identity of neighbouring bacteria and that inter-specific interactions are an important factor in determining microbial community structure.     

The effect of temperature and relative humidity on the survival of bacteria attached to dry solid surfaces

The effect of relative humidity (r.h.) (0%, 34% and 75%) and temperature (4, 15 and 25°C) on the desiccation survival of Pseudomonas sp., Acinetobacter calcoaceticus , a coryneform, Staphylococcus sp., and Staphylococcus aureus attached to and grown on glass surfaces was studied. The survival of Gram-negative and Gram-positive species was similar. Bacterial survival was shortest at 25°C for all species studied, and in most cases longest at 4°C. The effect of r.h. on survival varied with species. The number of microcolonies and the number of cells within microcolonies for Pseudomonas sp. increased on the dry surfaces after 7 d incubation under all desiccation conditions.     

Effect of biofouling on anodized and sol-gel treated titanium surfaces: a comparative study

Anodization and sol-gel treatments of titanium (Ti) were evaluated as biofilm control measures on surfaces exposed to seawater exposed to ultraviolet light. Anodized and sol-gel treated specimens were characterized using Raman spectroscopy to confirm the presence of TiO(2). The single anatase phase was observed at the anodized surfaces whereas the anatase/rutile mixed phase was detected on the sol-gel coated surfaces. After exposure of the specimens to seawater, biofilms were characterized by total viable counts, and epifluorescence and Raman microscopy. These techniques confirmed the reduction in biofilm formation on both the anodized and sol-gel coated Ti specimens compared to the untreated specimens. Biofilm control by anodization was found to be more effective than by sol-gel treatment of the specimens. The higher particle size and the inhomogeneity at the sol-gel coated surfaces produced less effective biofilm control.     

Scanning electron microscopy of dairy equipment surfaces contaminated by two milk-borne micro-organisms

Ethanol dehydration followed by argon replacement induced drying (ARID) was found to be a suitable method for the preparation of glass, stainless steel and rubber surfaces which had been in contact with inoculated milk and which were to be examined using scanning electron microscopy (SEM). This technique was used to examine samples of all three materials which had been subjected to both single and repeated inoculation with whole milk containing a Pseudomonas sp. or a Micrococcus sp. and incubated for various periods. Some samples were also prepared for SEM using a cryofixation technique. The Pseudomonas sp. was found to proliferate on glass and stainless steel surfaces but not on rubber. Due to the clumping tendency of the Micrococcus sp. proliferation of this organism was more difficult to assess accurately. In general there was no difference in results obtained between single and repeated inoculation. Various factors which may have aided attachment of micro-organisms to surfaces were identified viz. , surface channels present in stainless steel, milk deposits and the production of extracellular material. The value of using both the cryofixation and chemical preparatory techniques for the identification of artifacts is discussed.     

Effect of biofouling on anodized and sol-gel treated titanium surfaces: a comparative study

Anodization and sol-gel treatments of titanium (Ti) were evaluated as biofilm control measures on surfaces exposed to seawater exposed to ultraviolet light. Anodized and sol-gel treated specimens were characterized using Raman spectroscopy to confirm the presence of TiO₂. The single anatase phase was observed at the anodized surfaces whereas the anatase/rutile mixed phase was detected on the sol-gel coated surfaces. After exposure of the specimens to seawater, biofilms were characterized by total viable counts, and epifluorescence and Raman microscopy. These techniques confirmed the reduction in biofilm formation on both the anodized and sol-gel coated Ti specimens compared to the untreated specimens. Biofilm control by anodization was found to be more effective than by sol-gel treatment of the specimens. The higher particle size and the inhomogeneity at the sol-gel coated surfaces produced less effective biofilm control.     

Antibacterial properties of nine pure metals: a laboratory study using Staphylococcus aureus and Escherichia coli

Bacterial attachment and growth on material surfaces are considered to be the primary steps leading to the formation of biofilm. Biofilms in hospital and food processing settings can result in bacterial infection and food contamination, respectively. Prevention of bacterial attachment, therefore, is considered to be the best strategy for abating these menaces and therefore the development of antibacterial metals becomes important. In this study, nine pure metals, viz. titanium, cobalt, nickel, copper, zinc, zirconium, molybdenum, tin, and lead have been tested for their antibacterial properties against two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. This was accomplished using two assay methods, the film contact method and the shaking flask method. The results show that the antibacterial properties varied significantly with different metals and the effectiveness of metals to resist bacterial attachment varied with the bacterial strain. Among the metals tested, titanium and tin did not exhibit antibacterial properties. TEM images showed that metal accumulation resulted in the disruption of the bacterial cell wall and other cellular components.     

Monitoring of microbial adhesion and biofilm growth using electrochemical impedancemetry

Electrochemical impedance spectroscopy was tested to monitor the cell attachment and the biofilm proliferation in order to identify characteristic events induced on the metal surface by Gram-negative (Pseudomonas aeruginosa PAO1) and Gram-positive (Bacillus subtilis) bacteria strains. Electrochemical impedance spectra of AISI 304 electrodes during cell attachment and initial biofilm growth for both strains were obtained. It can be observed that the resistance increases gradually with the culture time and decreases with the biofilm detachment. So, the applicability of electric cell-substrate impedance sensing (ECIS) for studying the attachment and spreading of cells on a metal surface has been demonstrated. The biofilm formation was also characterized by the use of scanning electron microscopy and confocal laser scanning microscopy and COMSTAT image analysis. The electrochemical results roughly agree with the microscope image observations. The ECIS technique used in this study was used for continuous real-time monitoring of the initial bacterial adhesion and the biofilm growth. It provides a simple and non-expensive electrochemical method for in vitro assessment of the presence of biofilms on metal surfaces.     

Synthesis of pseudopeptides based L-tryptophan as a potential antimicrobial agent

Four compounds named L-BTrpPA, L-Trp-o-PA, L-Trp-m-PA and L-Trp-p-PA, pseudopeptides constructed from pyridine and tryptophan units, were synthesized and tested against the Gram-positive, Gram-negative strains of bacteria and human pathogenic fungi. L-Trp-o-PA proved to be a broad-spectrum antimicrobial agent, showing a significant inhibition of the growth of Gram-positive bacteria (Staphylococcus aureus, methicillin-resistant S. aureus, Bacillus subtilis, Micrococcus luteus), and pathogenic fungi (Candida spp., Cryptococcus neoformans, Rhodotorula glutinis, Saccharomyces cerevisiae, Aspergillus spp., Rhizopus nigricans) tested and activity against Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa and Proteus vulgaris, Enterobacter aerogenes) tested. The in vitro cell cytotoxicity of L-Trp-o-PA was evaluated using haemolytic assay, in which the compound was found to have low lytic property, even up to the concentration of 4000 microg/mL, it only lysed 6-7% of erythrocytes, which was 100-fold greater than the MICs (minimum inhibitory concentration).     

Antibacterial properties of nine pure metals: a laboratory study using Staphylococcus aureus and Escherichia coli

Bacterial attachment and growth on material surfaces are considered to be the primary steps leading to the formation of biofilm. Biofilms in hospital and food processing settings can result in bacterial infection and food contamination, respectively. Prevention of bacterial attachment, therefore, is considered to be the best strategy for abating these menaces and therefore the development of antibacterial metals becomes important. In this study, nine pure metals, viz. titanium, cobalt, nickel, copper, zinc, zirconium, molybdenum, tin, and lead have been tested for their antibacterial properties against two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. This was accomplished using two assay methods, the film contact method and the shaking flask method. The results show that the antibacterial properties varied significantly with different metals and the effectiveness of metals to resist bacterial attachment varied with the bacterial strain. Among the metals tested, titanium and tin did not exhibit antibacterial properties. TEM images showed that metal accumulation resulted in the disruption of the bacterial cell wall and other cellular components.     

Greater osteoblast proliferation on anodized nanotubular titanium upon electrical stimulation

Currently used orthopedic implants composed of titanium have a limited functional lifetime of only 10–15 years. One of the reasons for this persistent problem is the poor prolonged ability of titanium to remain bonded to juxtaposed bone. It has been proposed to modify titanium through anodization to create a novel nanotubular topography in order to improve cytocompatibility properties necessary for the prolonged attachment of orthopedic implants to surrounding bone. Additionally, electrical stimulation has been used in orthopedics to heal bone non-unions and fractures in anatomically difficult to operate sites (such as the spine). In this study, these two approaches were combined as the efficacy of electrical stimulation to promote osteoblast (bone forming cell) density on anodized titanium was investigated. To do this, osteoblast proliferation experiments lasting up to 5 days were conducted as cells were stimulated with constant bipolar pulses at a frequency of 20 Hz and a pulse duration of 0.4 ms each day for 1 hour. The stimulation voltages were 1 V, 5 V, 10 V, and 15 V. Results showed for the first time that under electrical stimulation, osteoblast proliferation on anodized titanium was enhanced at lower voltages compared to what was observed on conventional (nonanodized) titanium. In addition, compared to nonstimulated conventional titanium, osteoblast proliferation was enhanced 72% after 5 days of culture on anodized nanotubular titanium at 15 V of electrical stimulation. Thus, results of this study suggest that coupling the positive influences of electrical stimulation and nanotubular features on anodized titanium may improve osteoblast responses necessary for enhanced orthopedic implant efficacy.     

Comparing membrane and spacer biofouling by Gram-negative Pseudomonas aeruginosa and Gram-positive Anoxybacillus sp. in forward osmosis

Bacteria of different Gram-types have inherently different outer cell structures, influencing cell surface properties and bacterial attachment. Dynamic biofouling experiments were conducted over four days in a bench-scale forward osmosis (FO) system with Gram-negative Pseudomonas aeruginosa or Gram-positive Anoxybacillus sp. Biofouling resulted in ～10% decline in FO permeate water flux and was found to be significant for Anoxybacillus sp. but not for P. aeruginosa. Additionally, a stronger permeate water flux decline for P. aeruginosa in experiments with a superhydrophilic feed spacer demonstrated that mitigation methods require testing with different bacterial Gram-types. It was found that although permeate water flux decline can be affected by bacterial Gram-type the stable performance under enhanced biofouling conditions highlights the potential of FO for wastewater reclamation.     

Syringopeptin SP25A-mediated killing of gram-positive bacteria and the role of teichoic acid d-alanylation

The Pseudomonas syringae syringopeptins are cationic cyclic lipodepsipeptides that inhibit fungi and bacteria. The homolog syringopeptin (SP)25A was strongly inhibitory to several Gram-positive bacteria with minimum inhibitory concentrations ranging between 1.95 and 7.8 microg mL(-1). In contrast, it was not inhibitory to several Gram-negative bacteria. At 5 and 10 microg mL(-1), SP25A rapidly inhibited the growth of Bacillus subtilis and was bacteriocidal. Teichoic acid D-alanylation dltB- and dltD-defective mutant strains of B. subtilis were more susceptible to SP25A compared with the parental wild-type strain. The degree of susceptibility of the parent strain, but not the dltB and dltD mutant strains, increased at alkaline pH (9.0). In contrast, the parental and mutant strains had the same susceptibilities to syringopeptins SP22A and SP508A at pH 7.0 and 9.0. These results suggest that the cell wall anionic teichoic acids modulate SP25A action against B. subtilis, and they provide an explanation for the selective inhibition of Gram-positive bacteria by SP25A.     

Synthesis, structure and biological activity of cobalt(II) and copper(II) complexes of valine-derived schiff bases

We have synthesized two cobalt(II) 2 and copper(II) 3 complexes of valine-derived Schiff bases. The obtained complexes were characterized by elemental analysis, FT-IR and X-ray diffraction. Biological studies of complexes 2 and 3 had been carried out in vitro for antimicrobial activity against Gram-positive, Gram-negative bacteria and human pathogenic fungi. Compound 3 was proven to be a broad spectrum agent, showed a significant inhibition of the growth of Gram-positive bacteria (Staphylococcus aureus, methicillin-resistant S. aureus, Bacillus subtilis, Micrococcus luteus), and pathogenic fungi (Candida spp., Cryptococcus neoformans, Rhodothece glutinis, Saccharomyces cerevisia, Aspergillus spp., Rhizopus nigricans) tested and a moderate activity against Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, Proteus vulgaris and Enterobacter aerogenes) tested. The in vitro cytotoxicity of compound 3 was evaluated using hemolytic assay, in which the compound 3 was found to be non-toxic to human erythrocytes even at a concentration of 500mug/mL.     

Covalent attachment of proteins to peptidoglycan

Bacterial surface proteins are key players in host-symbiont or host-pathogen interactions. How these proteins are targeted and displayed at the cell surface are challenging issues of both fundamental and clinical relevance. While surface proteins of Gram-negative bacteria are assembled in the outer membrane, Gram-positive bacteria predominantly utilize their thick cell wall as a platform to anchor their surface proteins. This surface display involves both covalent and noncovalent interactions with either the peptidoglycan or secondary wall polymers such as teichoic acid or lipoteichoic acid. This review focuses on the role of enzymes that covalently link surface proteins to the peptidoglycan, the well-known sortases in Gram-positive bacteria, and the recently characterized l,d-transpeptidases in Gram-negative bacteria.     

Involvement of apolipophorin III in antibacterial defense of Galleria mellonella larvae

Apolipophorin III (apoLp-III) is an abundant hemolymph protein involved in lipid transport and immune response in insects. We investigated involvement of apoLp-III in the antibacterial response in Galleria mellonella larvae. Immune challenge with Gram-negative (Escherichia coli, Klebsiella pneumoniae) and Gram-positive (Micrococcus luteus) bacteria led to an increase in the level of apoLp-III in G. mellonella hemolymph, 0.5-2h and 8h after treatment, respectively. ApoLp-III purified from larval hemolymph as well as that present in hemolymph extracts adsorbed on the surface of different bacteria. The adsorption capacity of apoLp-III on bacterial cells prompted us to investigate the effect of this phenomenon on bacterial growth. Our results demonstrate antibacterial activity of apoLp-III against selected Gram-positive and Gram-negative bacteria in vitro. Among bacteria tested, Salmonella typhimurium and K. pneumoniae were the most sensitive to apoLp-III. LIVE/DEAD staining of bacteria incubated with purified apoLp-III revealed their growth inhibition; however, neither morphological changes in the cell shape nor formation of cell aggregates was noticed. The results suggest that apoLp-III is a multifunctional protein in G. mellonella hemolymph.     

Positive role of cell wall anchored proteinase PrtP in adhesion of lactococci

Background  

The first step in biofilm formation is bacterial attachment to solid surfaces, which is dependent on the cell surface physico-chemical properties. Cell wall anchored proteins (CWAP) are among the known adhesins that confer the adhesive properties to pathogenic Gram-positive bacteria. To investigate the role of CWAP of non-pathogen Gram-positive bacteria in the initial steps of biofilm formation, we evaluated the physico-chemical properties and adhesion to solid surfaces of Lactococcus lactis. To be able to grow in milk this dairy bacterium expresses a cell wall anchored proteinase PrtP for breakdown of milk caseins.     

Laboratory studies on adhesion of microalgae to hard substrates

Adhesion of Chlorella vulgaris(chlorophyceae), Nitzschia amphibia(bacillariophceae) and Chroococcus minutus(cyanobacteria) to hydrophobic (perspex, titanium and stainless steel 316-L), hydrophilic (glass) and toxic (copper, aluminium brass and admiralty brass) substrata were studied in the laboratory. The influence of surface wettability, surface roughness, pH of the medium, culture age, culture density, cell viability and presence of organic and bacterial films on the adhesion of Nitzschia amphibia was also studied using titanium, stainless steel and glass surfaces. All three organisms attached more on titanium and stainless steel and less on copper and its alloys. The attachment varied significantly with respect to exposure time and different materials. The attachment was higher on rough surfaces when compared to smooth surfaces. Attachment was higher on pH 7 and above. The presence of organic film increased the attachment significantly when compared to control. The number of attached cells was found to be directly proportional to the culture density. Attachment by log phase cells was significantly higher when compared to stationary phase cells. Live cells attached more when compared to heat killed and formalin killed cells. Bacterial films of Pseudomonas putida increased the algal attachment significantly. %     

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.     

Structural biology of Gram-positive bacterial adhesins

The structural biology of Gram-positive cell surface adhesins is an emerging field of research, whereas Gram-negative pilus assembly and anchoring have been extensively investigated and are well understood. Gram-positive surface proteins known as MSCRAMMs (microbial surface components recognizing adhesive matrix molecules) and individual proteins that assemble into long, hair-like organelles known as pili have similar features at the primary sequence level as well as at the tertiary structural level. Some of these conserved features are essential for their transportation from the cytoplasm and for cell wall anchoring. More importantly, the MSCRAMMs and the individual pilins are assembled with building blocks that are variants of structural modules used for human immunoglobulins. MSCRAMMs target the host's extracellular matrix proteins, such as collagen, fibrinogen, and fibronectin, and they have received considerable attention from structural biologists in the last decade, who have primarily been interested in understanding their interactions with host tissue. The recent focus is on the newly discovered pili of Gram-positive bacteria, and in this review, we highlight the advances in understanding of the individual pilus constituents and their associations and stress the similarities between the individual pilins and surface proteins.     

Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.