Preparation of Nanostructured Film Arrays for Transmission Localized Surface Plasmon Sensing

This article presents a concise review of preparation methods for transparent nanostructured films, with an emphasis on their current applications in transmission-localized surface plasmon resonance (T-LSPR) sensing. One of the first methods used for the fabrication of transparent nanostructured metal films is a direct vacuum evaporation of thin gold films. Self-induced formations of small gold islands result in transparent nanostructured gold arrays. The most well-established method is a nanosphere lithography developed by Van Duyne. Nanotriangular island arrays with controlled size and optical properties can be fabricated by this protocol. A different nanolithography method known as focused ion beam milling is reported and used for the fabrication of nanohole arrays. Simple assembly of solution-phase synthesized nanoparticles has also been utilized for the preparation of nanoparticle arrays capable of T-LSPR sensing. Lastly, this article also describes a new preparation strategy, in which self-assembly/thermolysis of nanoparticle multilayers is employed to obtain transparent nanoisland architectures on glass substrates.     

Improvement of Transparent Metal Top Electrodes for Organic Solar Cells by Introducing a High Surface Energy Seed Layer

We present highly transparent and conductive silver thin films in a thermally evaporated dielectric/metal/dielectric (DMD) multilayer architecture as top electrode for efficient small molecule organic solar cells. DMD electrodes are frequently used for optoelectronic devices and exhibit excellent optical and electrical properties. Here, we show that ultrathin seed layers such as calcium, aluminum, and gold of only 1 nm thickness strongly influence the morphology of the subsequently deposited silver layer used as electrode. The wetting of silver on the substrate is significantly improved with increasing surface energy of the seed material resulting in enhanced optical and electrical properties. Typically thermally evaporated silver on a dielectric material forms rough and granular layers which are not closed and not conductive below thicknesses of 10 nm. With gold acting as seed layer, the silver electrode forms a continuous, smooth, conductive layer down to a silver thickness of 3 nm. At 7 nm silver thickness such an electrode exhibits a sheet resistance of 19 Ω/□ and a peak transmittance of 83% at 580 nm wavelength, both superior compared to silver electrodes without seed layer and even to indium tin oxide (ITO). Top‐illuminated solar cells using gold/silver double layer electrodes achieve power conversion efficiencies of 4.7%, which is equal to 4.6% observed in bottom‐illuminated reference devices employing conventional ITO. The top electrodes investigated here exhibit promising properties for semitransparent solar cells or devices fabricated on opaque substrates.     

Tuning Plasmon Resonances for Light Coupling into Silicon: a “Rule of Thumb” for Experimental Design

For Si thin-film solar cells to become efficient, schemes to increase the optical absorption in the films are necessary. Scattering of light using plasmonic resonances in metal nanoparticles has been suggested as a feasible route. When placed on a dielectric layer on the front of a solar cell, such metal nanoparticles can scatter a large fraction of the incident light into the solar cell at the resonance wavelength, and hence increase the light collection. However, many related effects may lead to a reduction in photocurrent. Thus, nanoparticle plasmon resonances must be optimized in order to improve the overall light collection. From an experimentalist’s point of view, simple and fast experimental design tools should be explored. In this work, we investigate the plasmon-related photocurrent enhancements for Si test-solar cells with a number of different metal nanoparticle shapes and materials placed on top of a dielectric layer. The spectral position of the photocurrent-enhancement onset is compared to plasmon resonance calculations based on a fairly simple model. Despite the fact that the optical interactions in nanoparticle solar cell configurations can be quite complex, the photocurrent enhancement in the investigated test-solar cells can be predicted qualitatively well for particles with a plasmon resonance in the visible spectrum. This simple and fast model can be used as a rule of thumb in designing nanoparticle arrays for a specific photocurrent enhancement profile.     

Review of Some Interesting Surface Plasmon Resonance-enhanced Properties of Noble Metal Nanoparticles and Their Applications to Biosystems

Noble metal, especially gold (Au) and silver (Ag) nanoparticles exhibit unique and tunable optical properties on account of their surface plasmon resonance (SPR). In this review, we discuss the SPR-enhanced optical properties of noble metal nanoparticles, with an emphasis on the recent advances in the utility of these plasmonic properties in molecular-specific imaging and sensing, photo-diagnostics, and selective photothermal therapy. The strongly enhanced SPR scattering from Au nanoparticles makes them useful as bright optical tags for molecular-specific biological imaging and detection using simple dark-field optical microscopy. On the other hand, the SPR absorption of the nanoparticles has allowed their use in the selective laser photothermal therapy of cancer. We also discuss the sensitivity of the nanoparticle SPR frequency to the local medium dielectric constant, which has been successfully exploited for the optical sensing of chemical and biological analytes. Plasmon coupling between metal nanoparticle pairs is also discussed, which forms the basis for nanoparticle assembly-based biodiagnostics and the plasmon ruler for dynamic measurement of nanoscale distances in biological systems.     

Influences of Nanostructure Arrays on Light Absorption in Amorphous Silicon Thin-Film Solar Cells

By means of finite-difference time-domain (FDTD) numerical method, we investigate the possibility to enhance the light absorption in solar cells by employing different nanostructures. The solar cells are made of 100-nm-thick amorphous silicon (α-Si). The impacts of gold nanohole arrays, dielectric nanosphere arrays, and gold nanoparticle arrays on the light absorption are simulated, compared, and analyzed. The results show that gold nanohole arrays functioning as the back reflective layer, dielectric nanosphere arrays, and gold nanoparticle arrays can significantly enhance the light absorption for the solar cells, and the former two can increase the short-circuit current by more than 40 %, showing a great potential to improve the utilization efficiency of solar energy.     

In-Plane and Out-of-Plane Plasmons in Random Silver Nanoisland Films

Effective permittivity of closely spaced random nanoparticles supported by a substrate has been calculated using a modified Yamaguchi’s model (MYM) which involves the exact expression of a local field outside a metal nanoparticle (NP) along with the effective-medium approach. Pulsed laser deposition has been used to deposit silver nanoisland films on SiO₂ substrates. In-plane and out-of-plane plasmonic responses have been calculated using MYM for various filling fractions and the results are compared with those obtained from spectroscopic ellipsometry. Distinct features of out-of-plane and in-plane plasmons are observed with an spectroscopic ellipsometer and their behavior is supported by the present theoretical investigation. The comparison of the effective dielectric constants of the films obtained from ellipsometry data with those calculated using MYM shows uniaxial optical anisotropy in our case. The calculated morphological parameters (filling fraction, aspect ratio, and average particle size) using MYM are also found to be consistent with those obtained from FESEM images.     

Investigation of Gold and Silver Nanoparticles on Absorption Heating and Scattering Imaging

Efficient conversion of absorbed light to heat energy and strong scattering by gold and silver nanoparticles suggest these nanoparticles as the agents of heating and imaging. Absorption efficiency and scattering efficiency of gold and silver nanoparticles were studied through numerical simulation using the discrete dipole approximation method. This study shows that the size of gold and silver nanoparticles can effect gold and silver nanoparticles’ absorption efficiency and scattering efficiency. The gold nanoparticle is found to possess the maximum absorption efficiency when the size of gold nanoparticle is 50 nm and the incident wavelength is 540 nm, and the increasing scattering efficiency with the increasing size of gold nanoparticle in the medium, and refractive index of the medium is around 1.33. However, the silver nanoparticle owns the maximum absorption efficiency when the size of silver nanoparticle is 20 nm and the incident wavelength is 396 nm, and the maximum scattering efficiency when the size of silver nanoparticle is 30 nm and the incident wavelength is 410 nm in the same medium. The conditions for achieving the maximum adsorption efficiency and scattering efficiency of gold and silver nanoparticle can be used for heating and imaging using visible and near-infrared light.     

Study on the Effect of Poly(Styrene 4-Sulfonic Acid-co-Maleic Acid) Toward Metallization and Plasmonic Tuning of Silver Nanoparticle Thin Films

Thin films with tunable optical properties from yellow to metallic were prepared from a monolayer coating of silver nanoparticles (AgNP) onto a polyelectrolyte multilayer (PEM) thin film. The AgNP were synthesized using various concentrations of stabilizing polyelectrolytes leading to a competitive adsorption concept in which AgNP compete with excess polyelectrolytes to coat the cationic PEM top layer. The AgNP were synthesized by chemical reduction of Ag salts using poly(styrene 4-sulfonic acid-co-maleic acid) (PSS-co-MA) as stabilizing agent to produce nanoparticles coated with both a strong acid (sulfonic) and a weak acid (carboxylic) moiety. Although all the nanoparticle solutions displayed a characteristic bright yellow due to the localized surface plasmon band around 420 nm, the monolayer films of nanoparticles obtained after dipping displayed striking different optical properties. When using a high PSS-co-MA content in the solution, a pale-yellow film was obtained which color shifted to orange and metallic when the capping concentration was decreased from 0.25 to 0.001 mM. The optical properties of the AgNP film could be further changed by galvanic replacement of the Ag with gold ions to produce a gold monolayer. These results are interesting to produce surface with tunable catalytic properties, tunable optical properties, or to be used as primer for the metallization of polymeric surfaces.

     

Gold nanoparticle-based detection of genomic DNA targets on microarrays using a novel optical detection system

The development of a nanoparticle-based detection methodology for sensitive and specific DNA-based diagnostic applications is described. The technology utilizes gold nanoparticles derivatized with thiol modified oligonucleotides that are designed to bind complementary DNA targets. A glass surface with arrays of immobilized oligonucleotide capture sequences is used to capture DNA targets, which are then detected via hybridization to the gold nanoparticle probes. Amplification with silver allows for detection and quantitation by measuring evanescent wave induced light scatter with low-cost optical detection systems. Compared to Cy3-based fluorescence, silver amplified gold nanoparticle probes provide for a approximately 1000-fold increase in sensitivity. Furthermore, direct detection of non-amplified genomic DNA from infectious agents is afforded through increased specificity and even identification of single nucleotide polymorphisms (SNP) in human genomic DNA appears feasible.     

Modification of Front Surface Antireflection of Silicon Solar Cells with Composite Metallic Nanoparticle Arrays

This work reports on a numerical simulation study of the front surface modification of silicon solar cells by using composite metallic nanoparticle arrays. On top of the front surface of the cells, composite arrays that are made of silver or gold nanoparticles are carefully designed. The radii of the nanoparticles in the composite array and the lattice constant of the array are respectively varied, and the corresponding light reflectance at the front surface of the cell is calculated in the wavelength range from 400 to 1100 nm, via the FDTD method. The results determined from the composite arrays reveal that the reflectance curve across the whole wavelength range studied presents a more uniform behavior, compared with simple arrays. It is shown that the surface plasmon excitation effect of the metallic nanoparticles plays a crucial role in the light reflectance performance at the front surface of the silicon solar cells. The dependence of the light reflectance on the direction of the incident light’s polarization is also investigated, and it is found that the polarization has little effect on the reflectance curves once the composite arrays are optimized.     

Biosynthesis of silver and gold nanoparticles using thermophilic bacterium Geobacillus stearothermophilus

Nanomaterials have assumed a great deal of importance as they often display unique and considerably modified physical, chemical and biological properties as compared to their counterparts of the macroscale. In this study, biogenic synthesis of silver and gold nanoparticles by Geobacillus stearothermophilus has been attempted. The exposure of G. stearothermophilus cell free extract to the metal salts leads to the formation of stable silver and gold nanoparticles in the solution. These nanoparticles were characterized by UV–Vis spectra, FTIR, TEM, and XRD. The silver and gold nanoparticles have absorption maxima at 423 nm and 522 nm respectively. The TEM micrograph revealed the formation of polydispersed particles in the case of silver nanoparticles and monodispersed particles with respect to the gold nanoparticles. High stability of the nanoparticle solution could be attributed to the secretion of certain capping proteins by the bacterium in the reaction mixture. The involvement of these proteins was confirmed by FTIR and SDS PAGE.     

Surface Plasmon Enhancement of Optical Absorption in Thin-Film Silicon Solar Cells

Strong electromagnetic field enhancement that occurs under conditions of the surface plasmon excitation in metallic nanoparticles deposited on a semiconductor surface is a very efficient and promising tool for increasing the optical absorption within semiconductor solar cells and, hence, their photocurrent response. The enhancement of the optical absorption in thin-film silicon solar cells via the excitation of localized surface plasmons in spherical silver nanoparticles is investigated. Using the effective medium model, the effect of the nanoparticle size and the surface coverage on that enhancement is analyzed. The optimum configuration and the nanoparticle parameters leading to the maximum enhancement in the optical absorption and the photocurrent response in a single p-n junction silicon cell are obtained. The effect of coupling between the silicon layer and the surface plasmon fields on the efficiency of the above enhancement is quantified as well.     

Silver Nanoparticles in Epoxy Resin Deposited on Silicon Substrates for Light Trapping

Metallic silver nanoparticles were prepared in epoxy resin using N,N-dimethylformamide (DMF) as reducing agent of silver ions at room temperature. They were characterized by UV–Vis spectroscopy, atomic force microscopy (AFM), transmission electronic microscopy (TEM), and high-resolution transmission electronic microscopy (HRTEM). The silver nanoparticles showed broadband absorption spectra attributed to high-order plasmonic resonances. The morphology of the metallic particles corresponds to elongated particles and their aggregates with a size above 30 nm. These silver nanoparticles were deposited by the spin-coating process on crystalline silicon at room temperature. Then, the antireflective properties of these samples were measured. According to the observed results, it is inferred that the films of coalesced silver nanoparticles decrease the reflectance of crystalline silicon better than particles separated by large distances. These results are discussed in terms of forward scattering of large metallic nanoparticles where higher order multipolar modes are dominant and the retardation effects are very important.     

Tuning Plasmonic Properties of Truncated Gold Nanospheres by Coating

The influence of TiO₂ coating on resonant properties of gold nanoisland films deposited on silica substrates was studied numerically and in experiments. The model describing plasmonic properties of a metal truncated nanosphere placed on a substrate and covered by a thin dielectric layer has been developed. The model allows calculating a particle polarizability spectrum and, respectively, its surface plasmon resonance (SPR) wavelength for any given cover thickness, particle radius and truncation parameter, and dielectric functions of the particle, the substrate, the coating layer, and the surrounding medium. Dependence of the SPR position calculated for truncated gold nanospheres has coincided with the measured one for the gold nanoisland films covered with titania of different thicknesses. In the experiments, gold films with thickness of 5 nm were deposited on a silica glass substrate, annealed at 500 °C to form nanoislands of 20 nm in diameter, and covered with amorphous titania layers using atomic layer deposition technique. The resulting structures were characterized with scanning electron microscopy and optical absorption spectroscopy. The measured dependence of the SPR position on titania film thickness corresponded to the one calculated for truncated sphere-shaped nanoparticles with the truncation angle of ~50°. We demonstrated the possibility of tuning the SPR position within ~100 nm range by depositing to 30 nm thick titania layer.

     

Molecular dynamics simulation of the melting processes of core–shell and pure nanoparticles

Core–shell nanoparticles are nanosized particles that consist of a core and a shell, constructed from different metallic elements. Core–shell nanoparticles have received extensive attention, owing to their various potential applications such as paints, optical films and catalysts. Herein, we investigate the melting behaviours of different core–shell nanoparticles under continuous heating using molecular dynamics simulation. Different metallic elements were examined as core–shell and pure nanoparticles. Five different processes were observed during the melting of core–shell nanoparticles. In contrast, only one process was identified during the melting of pure nanoparticles. These processes were influenced by the nanoparticle size, shell thickness and differences between the lattice constants and melting point temperatures of the metallic elements. Our simulation provides microscopic insights into the melting behaviours of existing and proposed core–shell nanoparticles that would be highly beneficial towards the fabrication of materials with different chemical coatings.     

Preparation and Optical Characterization of Core–Shell Bimetal Nanoparticles

Chemical approaches allow for the synthesis of highly defined metal heteronanostructures, such as core–shell nanospheres. Because the material in the metal nanoparticles determines the plasmon resonance-induced absorption band, control of particle composition results in control of the position of the absorption band. Metal deposition on gold or silver nanoparticles yielded core–shell particles with modified optical properties. UV–vis spectroscopy on solution-grown, as well as surface-grown, particles was conducted and provided ensemble measurements in solution. Increasing the layers of a second metal leads to a shift in the absorption band. A shell diameter comparable to the original particle diameter leads to a predominant influence by the shell material. Extent of shell growth could be controlled by reaction time or the concentration of metal salt or reducing agent. Besides optical characterization, the utilization of atomic force microscopy, scanning electron microscopy, and transmission electron microscopy yielded important information about the ultrastructure of nanoparticle complexes. Surface-grown core–shell particles were superior in terms of achievable shell thickness, because of difficulties encountered with solution-grown particles due to salt-induced aggregation.     

Multiple Surface Plasmon Resonances in Compound Structure with Metallic Nanoparticle and Nanohole Arrays

The optical properties of a compound structure with metallic nanoparticle and nanohole arrays are numerically investigated by the means of finite-difference time domain method. We report on the observation of multi-valleys in the reflection spectra due to the excitation of surface plasmon (SP) resonant modes of the compound structure. Simulation results show that multiple SP resonances consist of surface plasmon polaritons on the gold film, localized surface plasmons on the nanoparticles, and coupling mode between them. These findings are important for applications utilizing multiple surface plasmon resonances.     

A Technique to Functionalize and Self-assemble Macroscopic Nanoparticle-ligand Monolayer Films onto Template-free Substrates

This protocol describes a self-assembly technique to create macroscopic monolayer films composed of ligand-coated nanoparticles^1,2. The simple, robust and scalable technique efficiently functionalizes metallic nanoparticles with thiol-ligands in a miscible water/organic solvent mixture allowing for rapid grafting of thiol groups onto the gold nanoparticle surface. The hydrophobic ligands on the nanoparticles then quickly phase separate the nanoparticles from the aqueous based suspension and confine them to the air-fluid interface. This drives the ligand-capped nanoparticles to form monolayer domains at the air-fluid interface.  The use of water-miscible organic solvents is important as it enables the transport of the nanoparticles from the interface onto template-free substrates.  The flow is mediated by a surface tension gradient^3,4 and creates macroscopic, high-density, monolayer nanoparticle-ligand films.  This self-assembly technique may be generalized to include the use of particles of different compositions, size, and shape and may lead to an efficient assembly method to produce low-cost, macroscopic, high-density, monolayer nanoparticle films for wide-spread applications.     

Highly Sensitive Plasmonic Sensor Based on Fano Resonance from Silver Nanoparticle Heterodimer Array on a Thin Silver Film

We investigate the optical spectrum of a multilayer metallic slab using multiple-scattering formalism. A thin silver film is attached to a periodic array of heterodimers consisting of two vertically spaced silver nanoparticles of different radii. Depending on the radius of nanoparticles, heterodimer array presents a simple nanoscale geometry which gives rise to remarkable plasmonic properties of multipolar resonances. Due to the coherent interference of the localized nanoparticle plasmons (discrete mode) and surface plasmon polaritons of metallic film (continuous mode), the reflection spectrum represents a sharp asymmetric Fano resonance dip, which is strongly sensitive to the refractive index of the surrounding embedded dielectric host. The physical features contribute to a highly efficient plasmonic sensor for refractive index sensing with sensitivity of ～1.5?×?10^?3 RIU/nm.