Continuous bio-catalytic conversion of sugar mixture to acetone–butanol–ethanol by immobilized <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis> DSM 792

Continuous production of acetone, n-butanol, and ethanol (ABE) was carried out using immobilized cells of Clostridium acetobutylicum DSM 792 using glucose and sugar mixture as a substrate. Among various lignocellulosic materials screened as a support matrix, coconut fibers and wood pulp fibers were found to be promising in batch experiments. With a motive of promoting wood-based bio-refinery concept, wood pulp was used as a cell holding material. Glucose and sugar mixture (glucose, mannose, galactose, arabinose, and xylose) comparable to lignocellulose hydrolysate was used as a substrate for continuous production of ABE. We report the best solvent productivity among wild-type strains using column reactor. The maximum total solvent concentration of 14.32 g L⁻¹ was obtained at a dilution rate of 0.22 h⁻¹ with glucose as a substrate compared to 12.64 g L⁻¹ at 0.5 h⁻¹ dilution rate with sugar mixture. The maximum solvent productivity (13.66 g L⁻¹ h⁻¹) was obtained at a dilution rate of 1.9 h⁻¹ with glucose as a substrate whereas solvent productivity (12.14 g L⁻¹ h⁻¹) was obtained at a dilution rate of 1.5 h⁻¹ with sugar mixture. The immobilized column reactor with wood pulp can become an efficient technology to be integrated with existing pulp mills to convert them into wood-based bio-refineries.     

Lipid production by <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> Y4 using different substrate feeding strategies

Microbial lipid is a potential alternative feedstock for the biodiesel industry. New culture strategies remain to be developed to improve the economics of microbial lipid technology. This work describes lipid production by the oleaginous yeast Rhodosporidium toruloides Y4 using a 15-l bioreactor with different substrate feeding strategies. Among these strategies, the intermittent feeding mode gave a lipid productivity of 0.36 g l⁻¹ h⁻¹, whereas the constant glucose concentration II (CC-II) mode gave the highest lipid productivity of 0.57 g l⁻¹ h⁻¹. The repeated fed-batch mode according to the CC-II mode was performed with a duration time of 358 h, and the overall lipid productivity was 0.55 g l⁻¹ h⁻¹. Our results suggested that substrate feeding modes had a great impact on lipid productivity and that the repeated fed-batch process was the most appealing method by which to enhance microbial lipid production.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Production of nisin Z using <Emphasis Type="Italic">Lactococcus lactis</Emphasis> IO-1 from hydrolyzed sago starch

A membrane bioreactor for production of nisin Z was constructed using Lactococcus lactis IO-1 in continuous culture using hydrolyzed sago starch as carbon source. A strategy used to enhance the productivity of nisin Z was to maintain the cells in a continuous growth at high cell concentration. This resulted in a volumetric productivity of nisin Z, as 50,000 IU l⁻¹ h⁻¹ using a cell concentration of 15 g l⁻¹, 30^°C, pH 5.5 and a dilution rate of 1.24 h⁻¹. Adding 10 g l⁻¹ YE and 2 g l⁻¹ polypeptone, other inducers were unnecessary to maintain production of nisin. The operating conditions of the reactor removed nisin and lactate, thus minimizing their effects which allowed the maintenance of cells in continuous exponential growth phase mode with high metabolic activity.     

Comparison of saccharification process by acid and microwave-assisted acid pretreated swine manure

The saccharification process of swine manure by conventional and microwave-assisted acid pretreated were investigated using cellulose enzymes, respectively. The optima for microwave-assisted acid pretreated swine manure is achieved when swine manure of 50 g l⁻¹ of substrate concentration and water amount 40 ml was pretreated by 4% H₂SO₄ concentration with 445 W microwave powers for 30 min at pretreatment period, and temperature 50 °C, enzyme loading 2 mg g⁻¹ substrate, substrate concentration 5 g l⁻¹ and initial medium pH 4.8 at enzymes hydrolysis period by microwave-assisted acid pretreated, respectively. The optimal conditions by conventional acid pretreated is obtained when 50 g l⁻¹ swine manure was submerged in 40 ml, 4% H₂SO₄ maintained at 130 °C for 3 h at pretreatment period, and temperature 45 °C, enzyme loading 2 mg g⁻¹ substrate, substrate concentration 15 g l⁻¹ and initial medium pH 5.2 at enzymes hydrolysis period, respectively. Under the optimum conditions microwave-assisted acid pretreatment could achieve higher yield of reducing sugar, short reaction time, and lower energy consumption than from the conventional acid pretreatment, which indicates that microwave-assisted acid pretreatment is more suitable for swine manure pretreatment than by acid alone.     

Factors affecting the production of <Emphasis Type="SmallCaps">l</Emphasis>-xylulose by resting cells of recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Factors affecting the production of the rare sugar l-xylulose from xylitol using resting cells were investigated. An E. coli BPT228 strain that recombinantly expresses a gene for xylitol dehydrogenase was used in the experiments. The ratio of xylitol to l-xylulose was three times lower in the cytoplasm than in the medium. The effects of pH, temperature, shaking speed, and initial xylitol concentration on l-xylulose production were investigated in shaking flasks using statistical experimental design methods. The highest production rates were found at high shaking speed and at high temperature (over 44°C). The optimal pH for both productivity and conversion was between 7.5 and 8.0, and the optimal xylitol concentration was in the range 250–350 g l⁻¹. A specific productivity of 1.09 ± 0.10 g g⁻¹ h⁻¹ was achieved in a bioreactor. The response surface model based on the data from the shake flask experiments predicted the operation of the process in a bioreactor with reasonable accuracy.     

Fungal autolysate as a nutrient supplement for ethanol and chitosan production by <Emphasis Type="Italic">Mucor indicus</Emphasis>

Mucor indicus can be used to produce ethanol from a variety of sugars, including pentose’s. An extract of it, produced by autolysis, could replace yeast extract in culture medium with improved production of ethanol. At 10 g l⁻¹, the extract gave a higher ethanol yield (0.47 g g⁻¹) and productivity (0.71 g l⁻¹ h⁻¹) compared to medium containing yeast extract (yield 0.45 g g⁻¹; productivity 0.67 g l⁻¹ h⁻¹).     

l-Ribulose production by an Escherichia coli harboring l-arabinose isomerase from Bacillus licheniformis

Recombinant Escherichia coli harboring the l-arabinose isomerase (BLAI) from Bacillus licheniformis was used as a biocatalyst to produce l-ribulose in the presence of borate. Effects of substrate concentration, the borate to l-arabinose ratio, pH, and temperature on the conversion of l-arabinose to l-ribulose were investigated. l-Ribulose production was efficient when pH was higher than 9 and temperature was higher than 50 °C. Borate addition to the reaction mixture was essential for high conversion of l-arabinose to l-ribulose as it resulted in an equilibrium shift in favor of the product. Under the optimal conditions determined by response surface methodology, the E. coli harboring BLAI produced 375 g l⁻¹ L-ribulose from 500 g l⁻¹ l-arabinose at a reaction time of 60 min, corresponding to a conversion yield of 75% and productivity of 375 g l⁻¹ h⁻¹. When the resting recombinant E. coli cells were recycled, 85% of the yield was obtained even after seven cycles of reuse. The productivity and final concentration of l-ribulose obtained in the present study were the highest yet reported.     

Citric acid production from glycerol-containing waste of biodiesel industry by Yarrowia lipolytica in batch, repeated batch, and cell recycle regimes

Yarrowia lipolytica A-101-1.22 produces high citric acid (112 g l⁻¹) with a yield of 0.6 g g⁻¹ and a productivity of 0.71 g l⁻¹ h⁻¹ during batch cultivation in the medium with glycerol-containing waste of biodiesel industry. However, it was observed that the specific citric acid production rate, which was maximal at the beginning of the biosynthesis, gradually decreases in the late production phase and it makes continuation of the process over 100 h pointless. The cell recycle and the repeated batch regimes were performed as ways for prolongation of citric acid synthesis by yeast. Using cell recycle, the active citric acid biosynthesis (96–107 g l⁻¹) with a yield of 0.64 g g⁻¹ and a productivity of 1.42 g l⁻¹ h⁻¹ was prolongated up to 300 h. Repeated batch culture remained stable for over 1000 h; the RB variant of 30% feed every 3 days showed the best results: 124.2 g l^-1 citric acid with a yield of 0.77 g g^-1 and a productivity of 0.85 g l^-1 h^-1.     

Fed-batch versus batch cultures of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> for γ-decalactone production from methyl ricinoleate

Constant medium feeding rate and intermittent fed-batch fermentation strategies were investigated aiming to increase the yields of γ-decalactone production by Yarrowia lipolytica, using methyl ricinoleate as substrate and ricinoleic acid source. The accumulation of another compound, 3-hydroxy-γ-decalactone, was also analyzed since it derives from the direct precursor of γ-decalactone thereby providing information about the enzymatic activities of the pathway. Both strategies were compared with the traditional batch mode in terms of overall productivity and yield in respect to the substrate. Although the productivity of γ-decalactone was considerably higher in the batch mode (168 mg l⁻¹ h⁻¹), substrate conversion to lactone (73 mg γ-decalactone g⁻¹) was greater in the intermittent fed-batch giving 6.8 g γ-decalactone l⁻¹. This last strategy therefore has potential for γ-decalactone production at an industrial level.     

Bioethanol production in batch mode by a native strain of <Emphasis Type="Italic">Zymomonas mobilis</Emphasis>

Two wild strains of Zymomonas mobilis were isolated (named as ML1 and ML2) from sugar cane molasses obtained from different farms of Santander, Colombia. Initially, selection of the best ethanol-producer strains was carried out using ethanol production parameters obtained with a commercial strain Z. mobilis DSM 3580. Three isolated strains were cultivated in a culture medium containing yeast extract, peptone, glucose and salts, at pH 6 and 32°C with stirring rate of 65 rpm during 62 h. The best results of ethanol production were obtained with the native strain ML1, reaching a maximum ethanol concentration of 79.78 g l⁻¹. ML1 and ML2 strains were identified as Z. mobilis, according to the morphology, biochemical tests and molecular characterization by PCR of specific DNA sequences from Z. mobilis. Subsequently, the effect of different nitrogen sources on production of ethanol was evaluated. The best results were obtained using urea at a 0.73 g/l. In this case, maximum concentration of ethanol was 83.81 g l⁻¹, with kinetic parameters of yield of ethanol on biomass (Y_P/X) = 69.01(g g⁻¹), maximum volumetric productivity of ethanol (Qp_max) = 2.28 (g l⁻¹ h⁻¹), specific productivity of ethanol (q_P) = 3.54 (h⁻¹) and specific growth rate (μ) = 0.12 h⁻¹. Finally, we studied the effect of different culture conditions (pH, temperature, stirring, C/N ratio) with a Placket-Burman′s experimental design. This optimization indicated that the most significant variables were temperature and stirring. In the best culture conditions a significant increase in all variables of response was achieved, reaching a maximum ethanol concentration of 93.55 g l⁻¹.     

Continuous acetone–butanol–ethanol production by corn stalk immobilized cells

Corn stalk was used as a support to immobilize Clostridia beijerinckii ATCC 55025 in the fermentation process of acetone, butanol, and ethanol production. The effect of the dilution rate on solvent production was examined in a steady-state 20-day continuous flow operation. The maximum total solvent concentration of 8.99 g l⁻¹ was obtained at a dilution rate of 0.2 h⁻¹. Increasing the dilution rate between 0.2 and 1.0 h⁻¹ resulted in an increased solvent productivity, and the highest solvent productivity was obtained at 5.06 g l⁻¹ h⁻¹ with a dilution rate of 1 h⁻¹. The maximum solvent yield from glucose of 0.32 g g⁻¹ was observed at 0.25 h⁻¹. The cell adsorption and morphology change during the growth on corn stalk support were examined by the SEM.     

<Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> mutant with high inhibitor tolerance obtained by low-energy ion implantation

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l⁻¹ of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g⁻¹. When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l⁻¹ of ABE with a yield of 0.34 g g⁻¹, including 2.2 g l⁻¹ acetone, 6.8 g l⁻¹ butanol, and 0.5 g l⁻¹ ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.     

Application of oscillation for efficiency improvement of continuous ethanol fermentation with Saccharomyces cerevisiae under very-high-gravity conditions

Compared with steady state, oscillation in continuous very-high-gravity ethanol fermentation with Saccharomyces cerevisiae improved process productivity, which was thus introduced for the fermentation system composed of a tank fermentor followed by four-stage packed tubular bioreactors. When the very-high-gravity medium containing 280 g l⁻¹ glucose was fed at the dilution rate of 0.04 h⁻¹, the average ethanol of 15.8% (v/v) and residual glucose of 1.5 g l⁻¹ were achieved under the oscillatory state, with an average ethanol productivity of 2.14 g h⁻¹ l⁻¹. By contrast, only 14.8% (v/v) ethanol was achieved under the steady state at the same dilution rate, and the residual glucose was as high as 17.1 g l⁻¹, with an ethanol productivity of 2.00 g h⁻¹ l⁻¹, indicating a 7% improvement under the oscillatory state. When the fermentation system was operated under the steady state at the dilution rate of 0.027 h⁻¹ to extend the average fermentation time to 88 h from 59 h, the ethanol concentration increased slightly to 15.4% (v/v) and residual glucose decreased to 7.3 g l⁻¹, correspondingly, but the ethanol productivity was decreased drastically to 1.43 g h⁻¹ l⁻¹, indicating a 48% improvement under the oscillatory state at the dilution rate of 0.04 h⁻¹.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Conversion of oleic acid to 10-hydroxystearic acid by whole cells of <Emphasis Type="Italic">Stenotrophomonas nitritireducens</Emphasis>

The optimal reaction conditions for the conversion of oleic acid to 10-hydroxystearic acid by whole cells of Stenotrophomonas nitritireducens were: pH 7.5, 35°C, 0.05% (w/v) Tween 80, 20 g cells l⁻¹, and 30 g oleic acid l⁻¹ in an anaerobic atmosphere. Under these conditions, the cells produced 31.5 g 10-hydroxystearic acid l⁻¹ over 4 h with a conversion yield of 100% (mol/mol) and a productivity of 7.9 g l⁻¹ h⁻¹, indicating that oleic acid was converted completely to 10-hydroxystearic acid, with no detectable byproduct. This is the highest concentration, productivity, and yield of 10-hydroxystearic acid from oleic acid reported thus far.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Continuous production of l(+)-lactic acid by Lactobacillus casei in two-stage systems

A two-stage two-stream chemostat system and a two-stage two-stream immobilized upflow packed-bed reactor system were used for the study of lactic acid production by Lactobacillus casei subsp casei. A mixing ratio of D ₁₂/D ₂= 0.5 (D = dilution rate) resulted in optimum production, making it possible to generate continuously a broth with high lactic acid concentration (48 g l⁻¹) and with a lowered overall content of initial yeast extract (5  g l⁻¹), half the concentration supplied in the one-step process. In the two-stage chemostat system, with the first stage at pH 5.5 and 37 °C and a second stage at pH 6.0, a temperature change from 40 °C to 45 °C in the second stage resulted in a 100% substrate consumption at an overall dilution rate of 0.05 h⁻¹. To increase the cell mass in the system, an adhesive strain of L. casei was used to inoculate two packed-bed reactors, which operated with two mixed feedstock streams at the optimal conditions found above. Lactic acid fermentation started after a lag period of cell growth over foam glass particles. No significant amount of free cells, compared with those adhering to the glass foam, was observed during continuous lactic acid production. The extreme values, 57.5 g l⁻¹ for lactic acid concentration and 9.72 g l⁻¹ h⁻¹ for the volumetric productivity, in upflow packed-bed reactors were higher than those obtained for free cells (48 g l⁻¹  and 2.42 g l⁻¹ h⁻¹) respectively and the highest overall l(+)-lactic acid purity (96.8%) was obtained in the two-chemostat system as compared with the immobilized-cell reactors (93%). Received: 4 December 1997 / Received revision: 23 February 1998 / Accepted: 14 March 1998     

Xylitol production by recombinant Corynebacterium glutamicum under oxygen deprivation

Wild-type Corynebacterium glutamicum produced 0.6 g l⁻¹ xylitol from xylose at a productivity of 0.01 g l⁻¹ h⁻¹ under oxygen deprivation. To increase this productivity, the pentose transporter gene (araE) from C. glutamicum ATCC31831 was integrated into the C. glutamicum R chromosome. Consequent disruption of its lactate dehydrogenase gene (ldhA), and expression of single-site mutant xylose reductase from Candida tenuis (CtXR (K274R)) resulted in recombinant C. glutamicum strain CtXR4 that produced 26.5 g l⁻¹ xylitol at 3.1 g l⁻¹ h⁻¹. To eliminate possible formation of toxic intracellular xylitol phosphate, genes encoding xylulokinase (XylB) and phosphoenolpyruvate-dependent fructose phosphotransferase (PTS^fru) were disrupted to yield strain CtXR7. The productivity of strain CtXR7 increased 1.6-fold over that of strain CtXR4. A fed-batch 21-h CtXR7 culture in mineral salts medium under oxygen deprivation yielded 166 g l⁻¹ xylitol at 7.9 g l⁻¹ h⁻¹, representing the highest bacterial xylitol productivity reported to date.