Influence of selected fruit tree pollen on life history of <Emphasis Type="Italic">Euseius stipulatus</Emphasis> (Acari: Phytoseiidae)

Euseius stipulatus (Athias-Henriot) is a predatory mite widespread in the Mediterranean region considered to be important for the biological control of spider mites in citrus orchards. Development, survival and reproduction of this phytoseiid mite feeding on seven commercially obtained pollen were studied under constant laboratory conditions (20 ± 1°C, RH 65 ± 5%, photoperiod 16L: 8D h). Mites were kept individually at rearing units with ample quantity of almond (Prunus amygdalus Batch), apple (Malus domestica Borkh), apricot (Prunus armeniaca L.), cherry (Prunus avium L.), pear (Pyrus communis L.), plum (Prunus domestica L.) and walnut (Juglans regia L.) pollen as food source. Developmental time from egg to adult varied between the several pollen tested from 8.38 ± 0.08 to 9.58 ± 0.11 days for females and from 8.23 ± 0.12 and 9.07 ± 0.12 days for males. Female longevity varied from 11.53 ± 1.22 to 51.38 ± 2.45 days, while fecundity ranged from 22.84 ± 2.30 to 43.61 ± 3.78 eggs/female. The predator was unable to reproduce when feeding on walnut pollen. Data were submitted to life table analysis and values of the intrinsic rate of increase were derived, ranging from 0.079 to 0.146 (day⁻¹). The cumulative Weibull function that was used to describe the age specific survival of females produced excellent fits to the survival data. Results show that almond, plum, cherry and apricot pollen possess higher nutritional value for E. stipulatus than pear and apple pollen and thus may contribute in sustaining and increasing the predator population in field conditions. Walnut pollen can be utilized by the predator only to survive during short periods of time when principal or alternative food sources are scarce.     

Visualization of plant cell walls by atomic force microscopy.

Atomic force microscopy has been used to visualize the ultrastructure of hydrated plant cell wall material from prepared apple (Malus pumila MILL; Cox orange pippin), water chestnut (Eleocharis dulcis L.), potato (Solanum tuberosum L.; Bintje), and carrot (Daucus carota L.; Amsterdamse bak) parenchyma. Samples of cell wall material in aqueous suspension were deposited onto freshly cleaved mica. Excess water was blotted away and the moist samples were imaged in air at ambient temperature and humidity. The three-dimensional images obtained highlighted the layered structure of the plant cell walls and revealed features interpreted as individual cellulose microfibrils and plasmodesmata.     

Electron diffraction from the primary wall of cotton fibers

Summary Electron diffraction patterns have been obtained from selected areas of disencrusted microfibrils isolated from the primary cell wall of cotton fibers. The resultant fiber diagram has the same meridional repeat distance as a corresponding pattern of secondary wall microfibrils but differs markedly in the equatorial reflections. The primary wall diagram displays only two strong equatorial reflections centered at 0.570 nm and 0.416 nm. The similarity of these spacings with those of cellulose IV suggests that the crystalline structure of the primary wall cellulose is similar to that of cellulose IV_I and is best explained in term of native cellulose I crystals having good longitudinal coherence (i.e., coherence along the length of the microfibrils) but with poor lateral organization of the network of inter chain hydrogen bonds. Similar results were also obtained for other primary wall specimens.     

The Cellulose System in the Cell Wall ofMicrasterias

The cellulose system of the cell wall ofMicrasterias denticulataandMicrasterias rotatawas analyzed by diffraction contrast transmission electron microscopy, electron diffraction, and X-ray analysis. The studies, achieved on disencrusted cell ghosts, confirmed that the cellulose microfibrils occurred in crisscrossed bands consisting of a number of parallel ribbon-like microfibrils. The individual microfibrils had thicknesses of 5 nm for a width of around 20 nm, but in some instances, two or three microfibrils merged into one another to yield larger monocrystalline domains reaching up to 60 nm in lateral size. The orientation of the cellulose ofMicrasteriasis very unusual, as it was found that in the cell wall, the equatorial crystallographic planes of cellulose having ad-spacing of 0.60 nm [(110) in the Iβ cellulose unit cell defined by Sugiyamaet al.,1991,Macromolecules24, 4168–4175] were oriented perpendicular to the cell wall surface. Up to now, such orientation has been found only inSpirogyra,another member of the Zygnemataceae group. The unusual structure of the secondary wall cellulose ofMicrasteriasmay be tentatively correlated with the unique organization of the terminal complexes, which in this alga occur as hexagonal arrays of rosettes.     

How the deposition of cellulose microfibrils builds cell wall architecture

Cell walls, the extracytoplasmic matrices of plant cells, consist of an ordered array of cellulose microfibrils embedded in a matrix of polysaccharides and glycoproteins. This construction is reminiscent of steel rods in reinforced concrete. How a cell organizes these ordered textures around itself, creating its own desirable environment, is a fascinating question. We believe that nature adopted an economical solution to this design problem: it exploits the geometrical constraints imposed by the shape of the cell and the limited space in which microfibrils are deposited, enabling the wall textures essentially to 'build themselves'. This does not imply that the cell cannot control its wall texture. On the contrary, the cell has ample regulatory mechanisms to control wall texture formation by controlling the insertion of synthases and the distance between individual microfibrils within a wall lamella.     

Influence of selected fruit tree pollen on life history of Euseius stipulatus (Acari: Phytoseiidae)

Euseius stipulatus (Athias-Henriot) is a predatory mite widespread in the Mediterranean region considered to be important for the biological control of spider mites in citrus orchards. Development, survival and reproduction of this phytoseiid mite feeding on seven commercially obtained pollen were studied under constant laboratory conditions (20 ± 1°C, RH 65 ± 5%, photoperiod 16L: 8D h). Mites were kept individually at rearing units with ample quantity of almond (Prunus amygdalus Batch), apple (Malus domestica Borkh), apricot (Prunus armeniaca L.), cherry (Prunus avium L.), pear (Pyrus communis L.), plum (Prunus domestica L.) and walnut (Juglans regia L.) pollen as food source. Developmental time from egg to adult varied between the several pollen tested from 8.38 ± 0.08 to 9.58 ± 0.11 days for females and from 8.23 ± 0.12 and 9.07 ± 0.12 days for males. Female longevity varied from 11.53 ± 1.22 to 51.38 ± 2.45 days, while fecundity ranged from 22.84 ± 2.30 to 43.61 ± 3.78 eggs/female. The predator was unable to reproduce when feeding on walnut pollen. Data were submitted to life table analysis and values of the intrinsic rate of increase were derived, ranging from 0.079 to 0.146 (day⁻¹). The cumulative Weibull function that was used to describe the age specific survival of females produced excellent fits to the survival data. Results show that almond, plum, cherry and apricot pollen possess higher nutritional value for E. stipulatus than pear and apple pollen and thus may contribute in sustaining and increasing the predator population in field conditions. Walnut pollen can be utilized by the predator only to survive during short periods of time when principal or alternative food sources are scarce.     

Establishing and maintaining axial growth: wall mechanical properties and the cytoskeleton

Organ morphology depends on cell placement and directional cell expansion. Microtubules are involved in both of these processes so genetic approaches to understand the role microtubules play in organ expansion are not straightforward. Our use of the temperature-sensitive mor1-1 mutants led to the surprising discovery that Arabidopsis thaliana (L.) Heynh. root cells can establish and maintain transverse cellulose texture without well organized microtubule arrays. This work also demonstrated that cells can lose the ability to expand anisotropically without losing transversely oriented cellulose microfibrils. We suggest that microtubule disruption affects the cells ability to generate long cellulose microfibrils, which may be essential for achieving growth anisotropy. Thus organ shape may depend not only on the orientation but also on the relative length of cellulose microfibrils during axis establishment and growth. More recent work has shown an important correlation between microtubule organization and the deposition patterns of the glycosylphosphatidylinositol (GPI)-anchored wall protein COBRA. Loss of microtubule organization is associated with the dissipation of transverse banding patterns of COBRA, suggesting that COBRAs function in maintaining anisotropic expansion may be microtubule-dependent.     

THE SITES OF CELLULOSE SYNTHESIS IN ALGAE: DIVERSITY AND EVOLUTION OF CELLULOSE-SYNTHESIZING ENZYME COMPLEXES

Information on the sites of cellulose synthesis and the diversity and evolution of cellulose-synthesizing enzyme complexes (terminal complexes) in algae is reviewed. There is now ample evidence that cellulose synthesis occurs at the plasma membrane-bound cellulose synthase, with the exception of some algae that produce cellulosic scales in the Golgi apparatus. Freeze-fracture studies of the supramolecular organization of the plasma membrane support the view that the rosettes (a six-subunit complex) in higher plants and both the rosettes and the linear terminal complexes (TCs) in algae are the structures that synthesize cellulose and secrete cellulose microfibrils. In the Zygnemataceae, each single rosette forms a 5-nm or 3-nm single “elementary” microfibril (primary wall), whereas rosettes arranged in rows of hexagonal arrays synthesize criss-crossed bands of parallel cellulose microfibrils (secondary wall). In Spirogyra, it is proposed that each of the six subunits of a rosette might synthesize six β-1,4-glucan chains that cocrystallize into a 36-glucan chain “elementary” microfibril, as is the case in higher plants. One typical feature of the linear terminal complexes in red algae is the periodic arrangement of the particle rows transverse to the longitudinal axis of the TCs. In bangiophyte red algae and in Vaucheria hamata, cellulose microfibrils are thin, ribbon-shaped structures, 1–1.5 nm thick and 5–70 nm wide; details of their synthesis are reviewed. Terminal complexes appear to be made in the endoplasmic reticulum and are transferred to Golgi cisternae, where the cellulose synthases are activated and may be transported to the plasma membrane. In algae with linear TCs, deposition follows a precise pattern directed by the movement and the orientation of the TCs (membrane flow). A principal underlying theme is that the architecture of cellulose microfibrils (size, shape, crystallinity, and intramicrofibrillar associations) is directly related to the geometry of TCs. The effects of inhibitors on the structure of cellulose-synthetizing complexes and the relationship between the deposition of the cellulose microfibrils with cortical microtubules and with the membrane-embedded TCs is reviewed In Porphyra yezoensis, the frequency and distribution of TCs reflect polar tip growth in the apical shoot cell.The evolution of TCs in algae is reviewed. The evidence gathered to date illustrates the utility of terminal complex organization in addressing plant phylogenetic relationships.     

Cellulose microfibril orientation and cell shaping in developing guard cells of Allium: The role of microtubules and ion accumulation

Summary The role of microtubules and ions in cell shaping was investigated in differentiating guard cells of Allium using light and electron microscopy and cytochemistry. Microtubules appear soon after cytokinesis in a discrete zone close to the plasmalemma adjacent to the common wall between guard cells. The microtubules fan out from this zone, which corresponds to the future pore site, towards the other sides of the cell. Soon new cellulose microfibrils are deposited on the wall adjacent to the microtubules and oriented parallel to them. As the wall thickens, the shape of the cell shifts from cylindrical to kidney-like. Studies with polarized light show that guard cells gradually assume a birefringence pattern during development characteristic of wall microfibrils radiating away from the pore site. Retardation increases from 10 Å when cells just begin to take shape, to 80–100 Å at maturity. Both microfibril and microtubule orientation remain constant during development. Observations on aberrant cells including those produced under the influence of drugs such as colchicine, which leads to loss of microtubules, abnormal wall thickenings and disruption of wall birefringence, further support the role of microtubules in cell shaping through their function in the localization of wall deposition and the orientation of cellulose microfibrils in the new wall layer. Potassium first appears in guard mother cells before division and rapidly accumulates afterwards during cell shaping, as judged by the cobaltinitrite reaction. Some chloride and perhaps organic acid anions also accumulate. Thus, these ions, which are known to play a role in the function of mature guard cells, also seem to be important in the early growth and shaping of these cells.Abbreviations IPC isopropyl-N-phenylcarbamate - CB cytochalasin B - GMC guard mother cell - MTOC microtubule organizing center     

Effect of several different pollens on the bio-ecological parameters of the predatory mite Typhlodromus athenas Swirski and Ragusa (Acari: Phytoseiidae)

The development, survivorship, and reproduction of the predacious mite Typhlodromus athenas Swirski and Ragusa were studied in the laboratory by rearing the predator on nine different plant pollens [almond(Prunus amygdalis Batsch), apple (Malus domestica Borkh.), apricot (Prunus armeniaca L.), cherry (Prunus avium L.), pear (Pyrus communis L.), plum (Prunus domestica L.), walnut (Juglans regia L.), olive (Olea europaea L.), Typha sp.], and pollen collected from bee hives. All experiments were conducted in environmental chambers at 20 ± 1°C, 65% RH, and a photoperiod of 16:8 (L:D) h. Survival during immature development ranged from 81.1 to 96.0%. The shortest mean developmental time from egg to adult with respect to the range of pollen species was recorded for females and males fed on almond pollen (10.76 ± 0.18 and 10.45 ± 0.21 d, respectively), while the longest was on beehive pollen (26.97 ± 0.23 and 24.00 ± 0.25 d for females and males, respectively). Female longevity varied from 51.63 ± 5.52 d (olive pollen) to 102.81 ± 6.60 d (pear pollen), while fecundity ranged from 5.33 ± 2.35 eggs per female (beehive pollen) to 26.43 ± 1.73 eggs per female (almond pollen). The diet consisting of almond pollen resulted in the highest intrinsic rate of natural increase (r(m)) (1.00 d(-1)) and pollen collected from bee hives resulted in the lowest (0.013 d(-1)). These results showed that various pollen could favor the development of T. athenas, and also support the view that alternative food resources may play an important role in the field for sustaining and increasing the predator's population.     

Lattice images from ultrathin sections of cellulose microfibrils in the cell wall of Valonia macrophysa Kütz.

The crystalline ultrastructure and orientation of cellulose microfibrils in the cell wall of Valonia macrophysa were investigated by means of high-resolution electron microscopy of ultrathin (approx. 28 nm) sections. With careful selection of imaging conditions, ultrastructural aspects of the cell wall that had remained unresolved in previous studies were worked out by direct imaging of crystal lattice of cellulose microfibrils. It was confirmed that each microfibril is a single crystal having a lateral dimension of 20·20 nm², because lattice images of 0.39 nm resolution were clearly recorded with no major disruption in the whole area of the cross section of the microfibril. There was no evidence for the existence of 3.5-nm elementary fibrils which have been considered to be basic crystallographic and morphological units of cellulose in general. It was also confirmed that the axial directions (crystallographic fiber direction) of adjacent microfibrils in each single lamella of the cell wall are opposite to each other.     

The role of microtubules and cell-wall deposition in elongation of regenerating protoplasts of Mougeotia

Protoplasts of the filamentous green alga Mougeotia sp. are spherical when isolated and revert to their normal cylindrical cell shape during regeneration of a cell wall. Sections of protoplasts show that cortical microtubules are present at all times but examination of osmotically ruptured protoplasts by negative staining shows that the microtubules are initially free and become progressively cross-bridged to the plasma membrane during the first 3 h of protoplast culture. Cell-wall microfibrils areoobserved within 60 min when protoplasts are returned to growth medium; deposition of microfibrils that is predominantly transverse to the future axis of elongation is detectable after about 6 h of culture. When regenerating protoplasts are treated with either colchicine or isopropyl-N-phenyl carbamate, drugs which interfere with microtubule polymerization, they remain spherical and develop cell walls in which the microfibrils are randomly oriented.     

New techniques enable comparative analysis of microtubule orientation, wall texture, and growth rate in intact roots of Arabidopsis

This article explores root epidermal cell elongation and its dependence on two structural elements of cells, cortical microtubules and cellulose microfibrils. The recent identification of Arabidopsis morphology mutants with putative cell wall or cytoskeletal defects demands a procedure for examining and comparing wall architecture and microtubule organization patterns in this species. We developed methods to examine cellulose microfibrils by field emission scanning electron microscopy and microtubules by immunofluorescence in essentially intact roots. We were able to compare cellulose microfibril and microtubule alignment patterns at equivalent stages of cell expansion. Field emission scanning electron microscopy revealed that Arabidopsis root epidermal cells have typical dicot primary cell wall structure with prominent transverse cellulose microfibrils embedded in pectic substances. Our analysis showed that microtubules and microfibrils have similar orientation only during the initial phase of elongation growth. Microtubule patterns deviate from a predominantly transverse orientation while cells are still expanding, whereas cellulose microfibrils remain transverse until well after expansion finishes. We also observed microtubule-microfibril alignment discord before cells enter their elongation phase. This study and the new technology it presents provide a starting point for further investigations on the physical properties of cell walls and their mechanisms of assembly.     

Celery (Apium graveolens L.) parenchyma cell walls examined by atomic force microscopy: effect of dehydration on cellulose microfibrils

Atomic force microscopy (AFM) was used to image celery (Apium graveolens L.) parenchyma cell walls in situ. Cellulose microfibrils could clearly be distinguished in topographic images of the cell wall. The microfibrils of the hydrated walls appeared smaller, more uniformly distributed, and less enmeshed than those of dried peels. In material that was kept hydrated at all times and imaged under water, the microfibril diameter was mainly in the range 6–25 nm. The cellulose microfibril diameters were highly dependent on the water content of the specimen. As the water content was decreased, by mixing ethanol with the bathing solution, the microfibril diameters increased. Upon complete dehydration of the specimen we observed a significant increase in microfibril diameter. The procedure used to dehydrate the parenchyma cells also influenced the size of cellulose microfibrils with freeze-dried material having larger diameters than air-dried material. Received: 16 November 1999 / Accepted: 7 March 2000     

Evidence for the role of the glomerulocyte in cellulose synthesis in the tunicate,Metandrocarpa uedai

Summary The tunicate,Metandrocarpa uedai, contains a large quantity of cellulose; however, it is not known how and where the cellulose is synthesized. Based on evidence from electron diffraction and conventional thin-sectioning for electron microscopy, this study shows that the glomerulocyte is involved in the synthesis of cellulose. The bundles of microfibrils in the glomerulocyte as well as the tunic were identified as cellulose I using selected area electron diffraction analysis. The diffraction pattern of cellulose in the glomerulocyte was similar to that from the tunic, suggesting that the crystallization of cellulose already is initiated in the glomerulocyte. The diameter of cellulose microfibrils, both in the glomerulocyte and the tunic was the same, about 16 nm. These results suggest that the glomerulocyte is the most probable site for the synthesis of cellulose in the tunic ofM. uedai. Using thin-sectioning techniques, a series of observations showed that individual microfibrils are primarily assembled in structures tentatively identified as vacuole-like structures, then they are bundled by a tapering region within the vacuole-like structures. These bundles of microfibrils are deposited in a continuously circular arrangement. The microtubules are oriented parallel to the bundles of microfibrils at the tapering vacuole-like structure, and they may be involved in the tapering of these structures (perhaps controlling the shape). This study also provides the first account for the involvement of a vacuole-like structure in the synthesis of cellulose microfibrils among living organisms.     

Cellulose-synthesizing terminal complexes and microfibril structure in the brown alga Sphacelaria rigidula (Sphacelariales,Phaeophyceae)*

The brown alga Sphacelaria rigidula Kützing synthesizes cellulose microfibrils as determined by CBH I-gold labeling. The cellulose microfibrils are thin, ribbon-like structures with a uniform thickness of about 2.6 nm and a variable width in the range of 2.6-30 nm. Some striations appear along the longitudinal axis of the microfibrils. The developed cell wall in Sphacelaria is composed of three to four layers, and cellulose micro-fibrils are deposited in the third layer from the outside of the wall. A freeze fracture investigation of this alga revealed cellulose-synthesizing terminal complexes (TCs), which are associated with the tip of microfibril impressions in the plasmatic fracture face of the plasma membrane. The TCs consist of subunits arranged in a single linear row. The average diameter of the sub-units is about 6 nm, and the intervals between the neighboring subunits, about 9 nm, are relatively constant. The number of subunits constituting the TC varies between 10 and 100, so that the length of the whole TC varies widely. A model that has been proposed for the assembly of thin, ribbon-like microfibrils was applied to microfibril assembly in Sphacelaria.     

How do expansins control plant growth? A model for cell wall loosening via defect migration in cellulose microfibrils

Expansins are plant cell wall-loosening proteins that promote cell growth and are essential for many critical developmental processes and stress responses. The molecular basis for expansin action is uncertain. Recently, it has been proposed that expansins loosen the wall by means of the generation of mobile conformational defects at the surface of cellulose microfibrils. The present work addresses this hypothesis by elaborating three assumptions: (1) microfibril–matrix interfaces cause steep stress gradients on the microfibril surface, (2) stress gradients drive the motion of conformational defects along the microfibril surface toward the microfibril–matrix interfaces, and (3) the approach of the defects to the microfibril–matrix interfaces facilitates the dissociation of matrix polysaccharides from cellulose microfibrils.     

Biophysical consequences of remodeling the neutral side chains of rhamnogalacturonan I in tubers of transgenic potatoes

Two lines of transgenic potato (Solanum tuberosum L.) plants modified in their cell wall structure were characterized and compared to wild type with regard to biomechanical properties in order to assign functional roles to the particular cell wall polysaccharides that were targeted by the genetic changes. The targeted polymer was rhamnogalacturonan I (RG-I), a complex pectic polysaccharide comprised of mainly neutral oligosaccharide side chains attached to a backbone of alternating rhamnosyl and galacturonosyl units. Tuber rhamnogalacturonan I molecules from the two transformed lines are reduced in linear galactans and branched arabinans, respectively. The transformed tuber tissues were found to be more brittle when subjected to uniaxial compression and the side-chain truncation was found to be correlated with the physical properties of the tissue. Interpretation of the force–deflection curves was aided by a mathematical model that describes the contribution of the cellulose microfibrils, and the results lead to the proposition that the pectic matrix plays a role in transmitting stresses to the load-bearing cellulose microfibrils and that even small changes to the rheological properties of the matrix have consequences for the biophysical properties of the wall.     

A kinesin-like protein is essential for oriented deposition of cellulose microfibrils and cell wall strength

Cortical microtubules have long been hypothesized to regulate the oriented deposition of cellulose microfibrils. However, the molecular mechanisms of how microtubules direct the orientation of cellulose microfibril deposition are not known. We have used fibers in the inflorescence stems of Arabidopsis to study secondary wall deposition and cell wall strength and found a fragile fiber (fra1) mutant with a dramatic reduction in the mechanical strength of fibers. The fra1 mutation did not cause any defects in cell wall composition, secondary wall thickening, or cortical microtubule organization in fiber cells. An apparent alteration was found in the orientation of cellulose microfibrils in fra1 fiber walls, indicating that the reduced mechanical strength of fra1 fibers probably was attributable to altered cellulose microfibril deposition. The FRA1 gene was cloned and found to encode a kinesin-like protein with an N-terminal microtubule binding motor domain. The FRA1 protein was shown to be concentrated around the periphery of the cytoplasm but absent in the nucleus. Based on these findings, we propose that the FRA1 kinesin-like protein is involved in the microtubule control of cellulose microfibril order.     

Further evidence from sectioned material in support of the existence of a linear terminal complex in cellulose synthesis

Summary Transmembrane linear terminal complexes considered to be involved in the synthesis of cellulose microfibrils have been described in the plasma membrane ofBoergesenia forbesii. Evidence for the existence of these structures has been obtained almost exlusively using the freeze etching technique. In the present study an attempt has been made to complete these studies using conventional fixation, staining, and sectioning procedures. In developing cells ofBoergesenia forbesii, strongly stained structures traversing the plasma membrane and averaging 598.9 nm ± 171.3 nm in length, 28.7 nm ± 4.2 nm in width, and 35.2 nm ± 6.6 nm in depth have been demonstrated. These structures are considered to be linear terminal complexes. At their distal (cell wall) surface, they appear to be closely associated with cellulose microfibrils. At the proximal (cytoplasmic) surface, they are associated with microtubules and polysomes. A model of the possible interrelation of the terminal complexes and microtubules leading to the generation of cell wall microfibrils is proposed.